* Florian Hars wrote: > Loading qlogicisp module. > ERROR: SCSI host `isp1020' has no error handling > ERROR: This is not a safe way to run your SCSI host > ERROR: The error handling must be added to this driver > fffffc000fb2bdf8 fffffffc00385db0 fffffffc0026a390 fffffffc00386968 > fffffffc00386968 fffffc000febb800 fffffffc00386968 0000000000000000 > fffffc0000000000 fffffc000fb2be40 fffffc000fb2be40 fffffc000febb800 > fffffffc00370047 fffffffc00386968 fffffffc0037a08c fffffffc00386968 > fffffc000059e800 0000000000000000 fffffffc0026204c fffffffc00386968 > fffffc000059e800 fffffffc00386a48 fffffc000059e800 fffffc000059c778 > Trace: > [<fffffc000034ddcc>] sys_init_module+0x1cc/0x3d0 > [<fffffc0000315244>] entSys+0xa4/0xc0 > > qlogicisp : new isp1020 revision ID (5) > scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 20 irq 27 I/O base 0x8000 [...] > qla1280: QLA1040 found on PCI bus 1, dev 4 > Unable to handle kernel paging request at virtual address 00000000000001c8 > swapper(0): Oops 1
Why are you loading both, qlogicisp _and_ qla1280 on boot? Disabling the qlogicisp module should fix your problem. Unfortunately I had no time to modify initrd-tools so qla1280 is used for ISP1020 controllers. Norbert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
