Your message dated Wed, 06 Jan 2016 16:43:01 +0000 with message-id <1452098581.2768.119.ca...@decadent.org.uk> and subject line Re: Bug#809430: Subject: linux-image-4.3.0-1-amd64: USB wireless adapter causes xhci errors when plugged in has caused the Debian Bug report #809430, regarding Subject: linux-image-4.3.0-1-amd64: USB wireless adapter causes xhci errors when plugged in to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 809430: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=809430 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.3.3-2 Severity: normal Dear Maintainer, (Sorry if I'm doing this wrong. It's my first bug report, and my third attempt at filing it. Also, I couldn't get reportbug to work with any mail server I tried, so this is a copy of its output.) * What led up to the situation? I dist-upgraded my Testing system yesterday morning, and this included the 4.3 kernel. When I rebooted, my USB wireless adapter (RNX-N180UBE) was no longer recognized. * What exactly did you do (or not do) that was effective (or ineffective)? First, I unplugged the adapter and plugged it back in. This did nothing: the light on the adapter started blinking, but it still wasn't recognized. Changing ports made no difference.Next, I tried a different adapter, a TP-Link TL-WN722N, and this had the same result. Checking the logs, I found a similar string of error messages with this adapter as with the other.I also tried inserting a USB flash drive. This was recognized and automounted, and I could browse it in Dolphin. I then unmounted it without any problems. I didn't attempt any file transfers with it, however. After that, I rebooted to the older kernel (4.2.6). The original adapter works fine under this version. * What was the outcome of this action? Booting with the 4.3.3 kernel caused both wireless adapters to stop working, producing a number of xhci errors at boot or when plugged in. Both adapters worked with 4.2.6. * What outcome did you expect instead? I expected the adapters to continue working after the upgrade. I'm currently running 4.2.6, as I need to use this computer for daily tasks, and I have no Internet access with 4.3. (I'm too far away for a wired connection.) I can reboot to 4.3 to gather more information, but that will have to be when I'm not using it for anything else. Below are what I think are the relevant parts of the logs from one attempt at plugging in the first adapter a few minutes after boot. The messages during boot or with the other adapter are similar. Only the timestamps and addresses are different. Thank you, Michael /var/log/messages:12/29/15 05:26:20 AM momikey kernel [ 1166.524325] usb 3-1: new high-speed USB device number 4 using xhci_hcd 12/29/15 05:26:20 AM momikey kernel [ 1166.656042] usb 3-1: New USB device found, idVendor=0bda, idProduct=8172 12/29/15 05:26:20 AM momikey kernel [ 1166.656050] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 12/29/15 05:26:20 AM momikey kernel [ 1166.656054] usb 3-1: Product: RNX-180UBE 12/29/15 05:26:20 AM momikey kernel [ 1166.656058] usb 3-1: Manufacturer: Manufacturer Realtek 12/29/15 05:26:20 AM momikey kernel [ 1166.656061] usb 3-1: SerialNumber: 00e04c000001 12/29/15 05:26:20 AM momikey kernel [ 1166.657440] r8712u: register rtl8712_netdev_ops to netdev_ops 12/29/15 05:26:20 AM momikey kernel [ 1166.657450] usb 3-1: r8712u: USB_SPEED_HIGH with 4 endpoints 12/29/15 05:26:20 AM momikey kernel [ 1166.658253] usb 3-1: r8712u: Boot from EFUSE: Autoload OK 12/29/15 05:26:21 AM momikey kernel [ 1167.696504] usb 3-1: r8712u: CustomerID = 0x0000 12/29/15 05:26:21 AM momikey kernel [ 1167.696511] usb 3-1: r8712u: MAC Address from efuse = 68:1c:a2:04:7e:4b 12/29/15 05:26:21 AM momikey kernel [ 1167.696515] usb 3-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" 12/29/15 05:26:21 AM momikey kernel [ 1167.696809] usb 3-1: firmware: direct-loading firmware rtlwifi/rtl8712u.bin 12/29/15 05:26:21 AM momikey mtp-probe checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:10.1/usb3/3-1" 12/29/15 05:26:21 AM momikey mtp-probe bus: 3, device: 4 was not an MTP device 12/29/15 05:26:22 AM momikey kernel [ 1168.725366] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.444041] r8712u 3-1:1.0 wlan0: 1 RCR=0x153f00e 12/29/15 05:26:23 AM momikey kernel [ 1169.445282] r8712u 3-1:1.0 wlan0: 2 RCR=0x553f00e 12/29/15 05:26:23 AM momikey kernel [ 1169.555649] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.759671] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240b0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.862800] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.866935] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240c0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.867604] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240d0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.913843] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.915500] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240e0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.926297] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240f0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.960425] xhci_hcd 0000:00:10.1: Looking for event-dma 0000000000024100 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:25 AM momikey kernel [ 1171.303254] xhci_hcd 0000:00:10.1: Looking for event-dma 0000000000024110 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0/var/log/kern.log:12/29/15 05:26:20 AM momikey kernel [ 1166.524325] usb 3-1: new high-speed USB device number 4 using xhci_hcd 12/29/15 05:26:20 AM momikey kernel [ 1166.656042] usb 3-1: New USB device found, idVendor=0bda, idProduct=8172 12/29/15 05:26:20 AM momikey kernel [ 1166.656050] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 12/29/15 05:26:20 AM momikey kernel [ 1166.656054] usb 3-1: Product: RNX-180UBE 12/29/15 05:26:20 AM momikey kernel [ 1166.656058] usb 3-1: Manufacturer: Manufacturer Realtek 12/29/15 05:26:20 AM momikey kernel [ 1166.656061] usb 3-1: SerialNumber: 00e04c000001 12/29/15 05:26:20 AM momikey kernel [ 1166.657440] r8712u: register rtl8712_netdev_ops to netdev_ops 12/29/15 05:26:20 AM momikey kernel [ 1166.657450] usb 3-1: r8712u: USB_SPEED_HIGH with 4 endpoints 12/29/15 05:26:20 AM momikey kernel [ 1166.658253] usb 3-1: r8712u: Boot from EFUSE: Autoload OK 12/29/15 05:26:21 AM momikey kernel [ 1167.696504] usb 3-1: r8712u: CustomerID = 0x0000 12/29/15 05:26:21 AM momikey kernel [ 1167.696511] usb 3-1: r8712u: MAC Address from efuse = 68:1c:a2:04:7e:4b 12/29/15 05:26:21 AM momikey kernel [ 1167.696515] usb 3-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" 12/29/15 05:26:21 AM momikey kernel [ 1167.696809] usb 3-1: firmware: direct-loading firmware rtlwifi/rtl8712u.bin 12/29/15 05:26:22 AM momikey kernel [ 1168.725366] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.444041] r8712u 3-1:1.0 wlan0: 1 RCR=0x153f00e 12/29/15 05:26:23 AM momikey kernel [ 1169.445282] r8712u 3-1:1.0 wlan0: 2 RCR=0x553f00e 12/29/15 05:26:23 AM momikey kernel [ 1169.555649] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.759659] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:23 AM momikey kernel [ 1169.759671] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240b0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.862800] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.866922] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:23 AM momikey kernel [ 1169.866935] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240c0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.867595] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:23 AM momikey kernel [ 1169.867604] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240d0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.913843] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 12/29/15 05:26:23 AM momikey kernel [ 1169.915492] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:23 AM momikey kernel [ 1169.915500] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240e0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.926290] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:23 AM momikey kernel [ 1169.926297] xhci_hcd 0000:00:10.1: Looking for event-dma 00000000000240f0 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:23 AM momikey kernel [ 1169.960419] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:23 AM momikey kernel [ 1169.960425] xhci_hcd 0000:00:10.1: Looking for event-dma 0000000000024100 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0 12/29/15 05:26:25 AM momikey kernel [ 1171.303249] xhci_hcd 0000:00:10.1: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 6 comp_code 13 12/29/15 05:26:25 AM momikey kernel [ 1171.303254] xhci_hcd 0000:00:10.1: Looking for event-dma 0000000000024110 trb-start 0000000000024090 trb-end 00000000000240a0 seg-start 0000000000024000 seg-end 0000000000024ff0-- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: MSI product_name: MS-7721 product_version: 1.0 chassis_vendor: MSI chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: V2.2 board_vendor: MSI board_name: FM2-A75MA-E35 (MS-7721) board_version: 1.0 ** PCI devices:00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex [1022:1410] Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex [1022:1410] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 000:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit [1022:1419] Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit [1022:1419] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 24 Capabilities: <access denied>00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7660D] [1002:9901] (prog-if 00 [VGA controller])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at f000 [size=256] Region 2: Memory at fef00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller [1002:9902]Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 44 Region 0: Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port [1022:1414] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7812] (rev 03) (prog-if 30 [XHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fef4a000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd00:10.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7812] (rev 03) (prog-if 30 [XHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fef48000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (rev 40) (prog-if 01 [AHCI 1.0])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+Latency: 32 Interrupt: pin A routed to IRQ 36 Region 0: I/O ports at f140 [size=8] Region 1: I/O ports at f130 [size=4] Region 2: I/O ports at f120 [size=8] Region 3: I/O ports at f110 [size=4] Region 4: I/O ports at f100 [size=16] Region 5: Memory at fef51000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fef50000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fef4f000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 11) (prog-if 10 [OHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fef4e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7808] (rev 11) (prog-if 20 [EHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fef4d000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:780b] (rev 14)Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Kernel driver in use: piix4_smbus00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 01)Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:d721]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:780e] (rev 11)Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 000:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge [1022:780f] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7809] (rev 11) (prog-if 10 [OHCI])Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fef4c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 [1022:1400] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 [1022:1401] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 [1022:1402] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 [1022:1403] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Capabilities: <access denied> Kernel driver in use: k10temp00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 [1022:1404] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 [1022:1405] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7721]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Region 0: I/O ports at e000 [size=256] Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 04f2:0833 Chicony Electronics Co., Ltd Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 002: ID 04f2:0939 Chicony Electronics Co., Ltd Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 005 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN AdapterBus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.2.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.3.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.58 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 21-1 ii linux-base 4.0 Versions of packages linux-image-4.3.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.0.9-1 Versions of packages linux-image-4.3.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-33 pn linux-doc-4.3 <none> Versions of packages linux-image-4.3.0-1-amd64 is related to: ii firmware-atheros 20151207-1 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 20151207-1 ii firmware-misc-nonfree [firmware-ralink] 20151207-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20151207-1 pn xen-hypervisor <none> -- debconf information: linux-image-4.3.0-1-amd64/prerm/removing-running-kernel-4.3.0-1-amd64: true linux-image-4.3.0-1-amd64/postinst/mips-initrd-4.3.0-1-amd64:linux-image-4.3.0-1-amd64/postinst/depmod-error-initrd-4.3.0-1-amd64: false
--- End Message ---
--- Begin Message ---Version: 4.3.3-5 On Wed, 2016-01-06 at 11:23 -0500, Michael Potter wrote: > I saw that 4.3.3-5 landed in Testing, so I upgraded. After the reboot, > there were no more xhci error messages. The adapter shows up just fine > in plasma-nm, and I ran a few speed tests to generate traffic. > Everything's looking good, and it seems like this update fixed the problem. Thanks, closing. Ben. -- Ben Hutchings It is easier to write an incorrect program than to understand a correct one.signature.asc
Description: This is a digitally signed message part
--- End Message ---