Your message dated Sun, 07 Feb 2016 22:43:08 +0000 with message-id <E1aSY2u-0006HP-UN@deadeye> and subject line Closing bugs assigned to linux-2.6 package has caused the Debian Bug report #652737, regarding linux-image-2.6.32-5-686: ethernet device eth0 (module atl1c) fails. After module reload device is not present any more. to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 652737: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=652737 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-2.6 Version: 2.6.32-39 Severity: important Description: When using wired connection after a short while ethernet connection hangs. After unloading atl1c and reloading module it may work again. Mostly it ends up with a error message ( kernel:[ 371.156342] Disabling IRQ #19 kernel:[ 774.643828] do_IRQ: 1.177 No irq handler for vector (irq -1)) and there is no more eth device present. Only reboot changes this. -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-39) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 04:23:54 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg01-root ro quiet acpi_osi=Linux usbcore.autosuspend=1 ** Not tainted ** Kernel log: [ 48.179535] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 48.181362] EXT3 FS on dm-7, internal journal [ 48.181378] EXT3-fs: mounted filesystem with ordered data mode. [ 98.328981] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 134.660149] atl1c 0000:01:00.0: PCI INT A disabled [ 158.108419] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 158.108456] atl1c 0000:01:00.0: setting latency timer to 64 [ 158.231819] atl1c 0000:01:00.0: version 1.0.0.2-NAPI [ 158.403000] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X [ 158.404150] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 159.872662] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 159.873276] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 160.832578] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down [ 162.373469] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 170.364044] eth0: no IPv6 routers present [ 371.156082] irq 19: nobody cared (try booting with the "irqpoll" option) [ 371.156099] Pid: 0, comm: swapper Not tainted 2.6.32-5-686 #1 [ 371.156108] Call Trace: [ 371.156125] [<c106d619>] ? __report_bad_irq+0x24/0x69 [ 371.156138] [<c106d620>] ? __report_bad_irq+0x2b/0x69 [ 371.156150] [<c106d745>] ? note_interrupt+0xe7/0x13e [ 371.156163] [<c106dc73>] ? handle_fasteoi_irq+0x7a/0x97 [ 371.156177] [<c1004dd7>] ? handle_irq+0x17/0x1b [ 371.156189] [<c1004659>] ? do_IRQ+0x38/0x89 [ 371.156201] [<c10037f0>] ? common_interrupt+0x30/0x38 [ 371.156249] [<f80bf24b>] ? acpi_idle_enter_simple+0x117/0x151 [processor] [ 371.156264] [<c11c6d25>] ? cpuidle_idle_call+0x68/0xbb [ 371.156276] [<c1002377>] ? cpu_idle+0x89/0xa2 [ 371.156290] [<c13bf806>] ? start_kernel+0x318/0x31d [ 371.156297] handlers: [ 371.156303] [<f827e931>] (usb_hcd_irq+0x0/0x71 [usbcore]) [ 371.156342] Disabling IRQ #19 [ 380.336164] atl1c 0000:01:00.0: PCI INT A disabled [ 417.224126] wlan0: deauthenticating from 62:67:f0:71:a1:57 by local choice (reason=3) [ 418.949666] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 421.191423] wlan0: direct probe to AP 62:67:f0:5c:f6:db (try 1) [ 421.195997] wlan0: direct probe responded [ 421.196048] wlan0: authenticate with AP 62:67:f0:5c:f6:db (try 1) [ 421.233859] wlan0: authenticated [ 421.233939] wlan0: associate with AP 62:67:f0:5c:f6:db (try 1) [ 421.240544] wlan0: RX AssocResp from 62:67:f0:5c:f6:db (capab=0x431 status=0 aid=1) [ 421.240557] wlan0: associated [ 421.250639] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 431.956041] wlan0: no IPv6 routers present [ 774.643752] atl1c 0000:01:00.0: enabling device (0000 -> 0002) [ 774.643779] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 774.643815] atl1c 0000:01:00.0: setting latency timer to 64 [ 774.643828] do_IRQ: 1.177 No irq handler for vector (irq -1) [ 774.897175] atl1c 0000:01:00.0: PCI INT A disabled [ 774.897216] atl1c: probe of 0000:01:00.0 failed with error -5 [ 831.963529] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 831.963567] atl1c 0000:01:00.0: setting latency timer to 64 [ 832.212181] atl1c 0000:01:00.0: PCI INT A disabled [ 832.212215] atl1c: probe of 0000:01:00.0 failed with error -5 ** Model information not available ** Loaded modules: Module Size Used by atl1c 23864 0 sha256_generic 10748 2 cbc 2047 1 dm_crypt 9264 1 cdc_subset 1593 0 cdc_ether 2633 0 usbnet 9527 2 cdc_subset,cdc_ether mii 2714 1 usbnet aes_i586 6816 4 aes_generic 25738 1 aes_i586 acpi_cpufreq 4951 1 cpufreq_stats 1997 0 parport_pc 15799 0 cpufreq_conservative 4018 0 ppdev 4058 0 lp 5570 0 cpufreq_powersave 602 0 cpufreq_userspace 1480 0 parport 22554 3 parport_pc,ppdev,lp fuse 44268 1 ipt_LOG 3570 1 ipt_REJECT 1517 2 xt_tcpudp 1743 6 xt_state 927 1 iptable_filter 1790 1 ipt_MASQUERADE 1134 3 iptable_nat 3551 1 nf_nat 10568 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 7597 4 iptable_nat,nf_nat nf_conntrack 38075 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 779 1 nf_conntrack_ipv4 ip_tables 7706 2 iptable_filter,iptable_nat x_tables 8327 7 ipt_LOG,ipt_REJECT,xt_tcpudp,xt_state,ipt_MASQUERADE,iptable_nat,ip_tables ext2 46245 1 loop 9769 0 arc4 974 2 ecb 1405 2 snd_hda_codec_realtek 163318 1 uvcvideo 45554 0 snd_hda_intel 16823 2 videodev 25605 1 uvcvideo ath9k 238477 0 joydev 6739 0 v4l1_compat 10250 2 uvcvideo,videodev usb_storage 30905 0 mac80211 123586 1 ath9k snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel i915 223022 2 ath 6018 1 ath9k snd_hwdep 4054 1 snd_hda_codec drm_kms_helper 18569 1 i915 snd_pcm 47226 2 snd_hda_intel,snd_hda_codec cfg80211 87637 3 ath9k,mac80211,ath snd_seq 35463 0 drm 111992 3 i915,drm_kms_helper uhci_hcd 16057 0 eeepc_laptop 10448 0 ehci_hcd 28693 0 snd_timer 12270 2 snd_pcm,snd_seq rfkill 10264 2 cfg80211,eeepc_laptop psmouse 44809 0 snd_seq_device 3673 1 snd_seq i2c_algo_bit 3497 1 i915 usbcore 98969 8 cdc_subset,cdc_ether,usbnet,uvcvideo,usb_storage,uhci_hcd,ehci_hcd i2c_core 12787 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit wmi 3575 0 pci_hotplug 18545 1 eeepc_laptop nls_base 4541 1 usbcore snd 34423 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device evdev 5609 23 video 14605 1 i915 serio_raw 2916 0 led_class 1757 1 ath9k output 1204 1 video battery 3782 0 ac 1640 0 processor 26327 3 acpi_cpufreq button 3598 1 i915 soundcore 3450 1 snd snd_page_alloc 5045 2 snd_hda_intel,snd_pcm ext3 94396 6 jbd 32317 1 ext3 mbcache 3762 2 ext2,ext3 dm_mod 46234 25 dm_crypt sd_mod 26005 3 crc_t10dif 1012 1 sd_mod ahci 27410 2 thermal 9206 0 libata 115869 1 ahci thermal_sys 9378 3 video,processor,thermal scsi_mod 104853 3 usb_storage,sd_mod,libata ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] Subsystem: ASUSTeK Computer Inc. Device [1043:83ac] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ac] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 28 Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at dc00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] Subsystem: ASUSTeK Computer Inc. Device [1043:83ac] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8437] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7f00000-f7ffffff Prefetchable memory behind bridge: 0000000080400000-00000000805fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 27 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=32] Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0400 [size=32] 01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1) Subsystem: ASUSTeK Computer Inc. Device [1043:8468] Physical Slot: eeepc-wifi Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 19 Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at ec00 [size=128] Capabilities: <access denied> 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: AzureWave Device [1a3b:1089] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0525:a4a2 Netchip Technology, Inc. Linux-USB Ethernet/RNDIS Gadget Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 13d3:5702 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=de_CH.UTF-8, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-39 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: pn firmware-linux-free <none> (no description available) ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---Version: 3.4.1-1~experimental.1+rm Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source package will no longer be updated. This bug is being closed on the assumption that it does not affect the kernel versions in newer Debian releases. If you can still reproduce this bug in a newer release, please reopen the bug report and reassign it to 'src:linux' and the affected version of the package. You can find the package version for the running kernel by running: uname -v or the versions of all installed kernel packages by running: dpkg -l 'linux-image-[34]*' | grep ^.i and looking at the third column. I apologise that we weren't able to provide a specific resolution for this bug. Ben. -- Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
