Your message dated Tue, 09 Feb 2016 15:25:42 +0000 with message-id <E1aTAAg-0004ej-3r@deadeye> and subject line Closing bugs assigned to linux-2.6 package has caused the Debian Bug report #366507, regarding [ToPIC97] trouble routing CSC IRQs and card IRQs to ISA IRQ (pcmcia cardbus disabled) to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 366507: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=366507 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-image-2.6.15-1-486 Version: 2.6.15-8 Severity: important When I boot my laptop with this kernel, I can't use my pcmcia ethernet card (Netgear). It works perfectly with kernels 2.2.27-pre2 (on potato) and 2.4.27-2-386 (testing). I've tried every combination of acpi and pci kernel parameters I could find but it didn't make it (unfortunately the Documentation/ directory from the kernel sources isn't packaged as documentation for this kernel so I don't know if I could test all possibilities). Here is some usefull information: 1. boot messages ---------------- Linux version 2.6.15-1-486 (Debian 2.6.15-8) ([email protected]) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6 15:19:16 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000005020000 (usable) BIOS-e820: 0000000005020000 - 0000000005040000 (reserved) BIOS-e820: 00000000fef80000 - 00000000ff000000 (reserved) BIOS-e820: 00000000fffe0000 - 00000000fffe6e00 (reserved) BIOS-e820: 00000000fffe6e00 - 00000000fffe7000 (ACPI NVS) BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved) 80MB LOWMEM available. On node 0 totalpages: 20512 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 16416 pages, LIFO batch:3 HighMem zone: 0 pages, LIFO batch:0 DMI not present. ACPI: Unable to locate RSDP Allocating PCI resources starting at 10000000 (gap: 05040000:f9f40000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux-2.6.15 ro root=303 pci=usepirqmask No local APIC present or hardware disabled mapped APIC to ffffd000 (010a1000) Initializing CPU#0 PID hash table entries: 512 (order: 9, 8192 bytes) Detected 166.660 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 73940k/82048k available (1516k kernel code, 7712k reserved, 574k data, 228k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 333.72 BogoMIPS (lpj=166862) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 Intel Pentium with F0 0F bug - workaround enabled. CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 mtrr: v2.0 (20020519) CPU: Intel Pentium MMX stepping 03 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 4378k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd507, last bus=21 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f8e30 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x90b4, dseg 0x0 PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:04.0 PCI: Bus 1, cardbus bridge: 0000:00:13.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 10000000-11ffffff MEM window: 12000000-13ffffff PCI: Bus 5, cardbus bridge: 0000:00:13.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 14000000-15ffffff MEM window: 16000000-17ffffff PCI: No IRQ known for interrupt pin A of device 0000:00:13.0. Please try using pci=biosirq. PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: No IRQ known for interrupt pin B of device 0000:00:13.1. Please try using pci=biosirq. PCI: Setting latency timer of device 0000:00:13.1 to 64 audit: initializing netlink socket (disabled) audit(1144267620.489:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode Freeing unused kernel memory: 228k freed input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 11, io mem 0xfcfff000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: SAMSUNG MP0402H, ATA DISK drive Probing IDE interface ide1... hdc: CD-220EA, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: ATAPI 16X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. PCI: No IRQ known for interrupt pin A of device 0000:00:13.0. Please try using pci=biosirq. Yenta: CardBus bridge found at 0000:00:13.0 [1179:0001] Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. irda_init() NET: Registered protocol family 23 irq 11: nobody cared (try booting with the "irqpoll" option) [<c012f8b6>] __report_bad_irq+0x31/0x73 [<c012f985>] note_interrupt+0x75/0x98 [<c012f482>] __do_IRQ+0x67/0x91 [<c0104fc1>] do_IRQ+0x19/0x24 [<c0103afa>] common_interrupt+0x1a/0x20 [<c0119a1c>] __do_softirq+0x2c/0x7d [<c0119a8f>] do_softirq+0x22/0x26 [<c0104fc6>] do_IRQ+0x1e/0x24 [<c0103afa>] common_interrupt+0x1a/0x20 [<c60a8261>] yenta_probe_irq+0x7e/0xcc [yenta_socket] [<c60a83eb>] yenta_get_socket_capabilities+0x21/0x4d [yenta_socket] [<c60a86ff>] yenta_probe+0x20c/0x265 [yenta_socket] [<c01b451d>] __pci_device_probe+0x32/0x41 [<c01b454b>] pci_device_probe+0x1f/0x34 [<c0208513>] driver_probe_device+0x32/0x7c [<c02085b4>] __driver_attach+0x0/0x36 [<c02085d8>] __driver_attach+0x24/0x36 [<c0207e1a>] bus_for_each_dev+0x46/0x6c [<c02085fe>] driver_attach+0x14/0x18 [<c02085b4>] __driver_attach+0x0/0x36 [<c0208196>] bus_add_driver+0x56/0x98 [<c01b4727>] __pci_register_driver+0x75/0x88 [<c601000f>] yenta_socket_init+0xf/0x12 [yenta_socket] [<c012a018>] sys_init_module+0xaa/0x167 [<c0102a99>] syscall_call+0x7/0xb handlers: [<c6044d97>] (usb_hcd_irq+0x0/0x56 [usbcore]) Disabling IRQ #11 Yenta: ISA IRQ mask 0x06b8, PCI irq 0 Socket status: 30000007 IrDA: Registered device irda0 toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$ PCI: No IRQ known for interrupt pin B of device 0000:00:13.1. Please try using pci=biosirq. Yenta: CardBus bridge found at 0000:00:13.1 [1179:0001] Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. Yenta: ISA IRQ mask 0x06b8, PCI irq 0 Socket status: 30000007 cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. input: PC Speaker as /class/input/input1 Real Time Clock Driver v1.12 input: PS/2 Generic Mouse as /class/input/input2 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Floppy drive(s): fd0 is 1.44M FDC 0 is an 8272A mice: PS/2 mouse device common for all mice Adding 128512k swap on /dev/hda2. Priority:-1 extents:1 across:128512k EXT3 FS on hda3, internal journal usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 ad1848: No ISAPnP cards found, trying standard ones... kobject_register failed for opl3sa2 (-17) [<c01aa7e4>] kobject_register+0x37/0x4b [<c0208180>] bus_add_driver+0x40/0x98 [<c01e557b>] pnp_register_driver+0x2f/0x5a [<c60103c5>] init_opl3sa2+0x38/0x3b7 [opl3sa2] [<c012a018>] sys_init_module+0xaa/0x167 [<c0102a99>] syscall_call+0x7/0xb opl3sa2: No PnP cards found YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 opl3: I/O port 0x388 already in use kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. lp0: using parport0 (interrupt-driven). NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver cs: pcmcia_socket1: cardbus cards are not supported. 2. lspci output --------------- 0000:00:00.0 Host bridge: Toshiba America Info Systems CPU to PCI bridge (rev 2c) Subsystem: Toshiba America Info Systems Satellite Pro Flags: bus master, medium devsel, latency 0 0000:00:04.0 VGA compatible controller: Chips and Technologies F65555 HiQVPro (rev c6) (prog-if 00 [VGA]) Subsystem: Toshiba America Info Systems Satellite Pro Flags: stepping, medium devsel Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] [size=256K] 0000:00:0b.0 USB Controller: NEC Corporation USB (rev 02) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems USB Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] 0000:00:11.0 Communication controller: Toshiba America Info Systems FIR Port (rev 21) Subsystem: Toshiba America Info Systems: Unknown device 0001 Flags: bus master, slow devsel, latency 64, IRQ 11 I/O ports at ffe0 [size=32] 0000:00:13.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 20) Subsystem: Toshiba America Info Systems: Unknown device 0001 Flags: bus master, slow devsel, latency 0 Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=14, subordinate=14, sec-latency=0 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 0000:00:13.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 20) Subsystem: Toshiba America Info Systems: Unknown device 0001 Flags: bus master, slow devsel, latency 0 Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=15, subordinate=15, sec-latency=0 Memory window 0: 60040000-60060000 I/O window 0: 00000800-000008ff I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 3. output of /proc/interrupts ----------------------------- CPU0 0: 609348 XT-PIC timer 1: 403 XT-PIC i8042 2: 0 XT-PIC cascade 5: 3 XT-PIC OPL3-SA2 7: 2 XT-PIC parport0 8: 1 XT-PIC rtc 11: 100000 XT-PIC ohci_hcd:usb1 12: 112 XT-PIC i8042 14: 160483 XT-PIC ide0 15: 23 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 4. output of /proc/iomem ------------------------ 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c97ff : Video ROM 000f0000-000fffff : System ROM 00100000-0501ffff : System RAM 00100000-0027b322 : Kernel code 0027b323-0030ac03 : Kernel data 05020000-0503ffff : reserved 10000000-11ffffff : PCI CardBus #01 12000000-13ffffff : PCI CardBus #01 14000000-15ffffff : PCI CardBus #05 16000000-17ffffff : PCI CardBus #05 18000000-1803ffff : 0000:00:04.0 18040000-18040fff : 0000:00:13.0 18040000-18040fff : yenta_socket 18041000-18041fff : 0000:00:13.1 18041000-18041fff : yenta_socket fcfff000-fcffffff : 0000:00:0b.0 fcfff000-fcffffff : ohci_hcd fd000000-fdffffff : 0000:00:04.0 fef80000-feffffff : reserved fffe0000-fffe6dff : reserved fffe6e00-fffe6fff : ACPI Non-volatile Storage fffe7000-ffffffff : reserved 5. output of /proc/ioports -------------------------- 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0330-0331 : MPU401 UART 0370-0371 : OPL3-SA control 0376-0376 : ide1 0378-037a : parport0 0388-0389 : OPL2/3 (left) 038a-038b : OPL2/3 (right) 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0534-0537 : CS4231 0cf8-0cff : PCI conf1 1000-10ff : PCI CardBus #01 1400-14ff : PCI CardBus #01 1800-18ff : PCI CardBus #05 1c00-1cff : PCI CardBus #05 ffe0-ffff : 0000:00:11.0 ffe0-fffe : toshoboe
--- End Message ---
--- Begin Message ---Version: 3.4.1-1~experimental.1+rm Debian 6.0 Long Term Support is now ending, and the 'linux-2.6' source package will no longer be updated. This bug is being closed on the assumption that it does not affect the kernel versions in newer Debian releases. If you can still reproduce this bug in a newer release, please reopen the bug report and reassign it to 'src:linux' and the affected version of the package. You can find the package version for the running kernel by running: uname -v or the versions of all installed kernel packages by running: dpkg -l 'linux-image-[34]*' | grep ^.i and looking at the third column. I apologise that we weren't able to provide a specific resolution for this bug. Ben. -- Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
