Your message dated Sun, 24 Apr 2016 11:31:13 +0200
with message-id <[email protected]>
and subject line Re: Bug#822377: thermal.ko taints kernel due to signature
problem
has caused the Debian Bug report #822377,
regarding thermal.ko taints kernel due to signature problem
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
822377: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=822377
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.5.1-1
Severity: normal
File: /lib/modules/4.5.0-1-amd64/kernel/drivers/acpi/thermal.ko
thermal: module verification failed: signature and/or required key
missing - tainting kernel
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (51 C)
Not sure how to check if the module is signed... but maybe it somehow
got built w/o a signature?
-- Package-specific info:
** Version:
Linux version 4.5.0-1-amd64 ([email protected]) (gcc version 5.3.1
20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)
** Command line:
BOOT_IMAGE=/vmlinuz-4.5.0-1-amd64 root=/dev/mapper/Heisenberg-root ro
pcie_aspm=force cgroup_enable=memory zswap.enabled=1
** Tainted: UE (8256)
* Userspace-defined naughtiness.
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 28.505346] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 28.561010] psmouse serio4: elantech: assuming hardware version 2 (with
firmware version 0x040101)
[ 28.597299] iTCO_vendor_support: vendor-support=0
[ 28.598413] psmouse serio4: elantech: Synaptics capabilities query result
0x7e, 0x13, 0x0d.
[ 28.614556] atl1c 0000:03:00.0 enp3s0: renamed from eth0
[ 28.636835] psmouse serio4: elantech: Elan sample query result 19, 00, 00
[ 28.668959] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 28.671144] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 28.674102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 28.716702] ath: phy0: ASPM enabled: 0x42
[ 28.718782] ath: EEPROM regdomain: 0x60
[ 28.718785] ath: EEPROM indicates we should expect a direct regpair map
[ 28.718789] ath: Country alpha2 being used: 00
[ 28.718792] ath: Regpair used: 0x60
[ 28.765812] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.766286] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900008a0000,
irq=17
[ 28.825291] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio4/input/input14
[ 29.573883] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 31.080937] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 31.083098] scsi host4: usb-storage 4-1:1.0
[ 31.085275] usbcore: registered new interface driver usb-storage
[ 31.385783] media: Linux media interface: v0.10
[ 31.409793] Linux video capture interface: v2.00
[ 31.493641] Adding 3903484k swap on /dev/mapper/Heisenberg-swap.
Priority:-1 extents:1 across:3903484k FS
[ 31.834682] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam
(04f2:b036)
[ 31.840506] uvcvideo 3-3:1.0: Entity type for entity Extension 5 was not
initialized!
[ 31.842652] uvcvideo 3-3:1.0: Entity type for entity Extension 4 was not
initialized!
[ 31.844745] uvcvideo 3-3:1.0: Entity type for entity Processing 3 was not
initialized!
[ 31.846830] uvcvideo 3-3:1.0: Entity type for entity Camera 1 was not
initialized!
[ 31.849076] input: USB2.0 0.3M UVC WebCam as
/devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input18
[ 31.851337] usbcore: registered new interface driver uvcvideo
[ 31.853516] USB Video Class driver (1.1.1)
[ 32.086377] scsi 4:0:0:0: CD-ROM TSSTcorp BDDVDW SE-506BB TS00
PQ: 0 ANSI: 0
[ 32.090790] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 32.315246] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 32.317613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 32.320239] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 32.794034] EXT4-fs (dm-3): barriers disabled
[ 32.849358] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
user_xattr,errors=remount-ro
[ 32.851905] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
errors=remount-ro,journal_async_commit,barrier=0,commit=600
[ 33.025058] usb 4-2: reset high-speed USB device number 3 using ehci-pci
[ 33.165602] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222
detected
[ 33.196099] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 33.199426] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 33.199969] usbcore: registered new interface driver rt2800usb
[ 33.206943] rt2800usb 4-2:1.0 wlxe8de2708b22a: renamed from wlan0
[ 37.224612] FS-Cache: Loaded
[ 37.250867] CacheFiles: Loaded
[ 41.423577] FS-Cache: Cache "mycache" added (type cachefiles)
[ 41.425256] CacheFiles: File cache on dm-3 registered
[ 52.828135] IPv6: ADDRCONF(NETDEV_UP): wlxe8de2708b22a: link is not ready
[ 52.828221] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'
[ 52.910385] rt2800usb 4-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 52.910399] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.29
[ 53.218648] IPv6: ADDRCONF(NETDEV_UP): wlxe8de2708b22a: link is not ready
[ 53.225601] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 53.240551] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 53.246697] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 53.261800] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 54.866526] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 54.881219] IPv6: ADDRCONF(NETDEV_UP): wlxe8de2708b22a: link is not ready
[ 61.707622] wlxe8de2708b22a: authenticate with 54:04:a6:d3:42:0d
[ 61.758685] wlxe8de2708b22a: send auth to 54:04:a6:d3:42:0d (try 1/3)
[ 61.759192] wlxe8de2708b22a: authenticated
[ 61.768050] wlxe8de2708b22a: associate with 54:04:a6:d3:42:0d (try 1/3)
[ 61.768940] wlxe8de2708b22a: RX AssocResp from 54:04:a6:d3:42:0d
(capab=0x831 status=0 aid=1)
[ 61.779423] wlxe8de2708b22a: associated
[ 61.779444] IPv6: ADDRCONF(NETDEV_CHANGE): wlxe8de2708b22a: link becomes
ready
[ 61.787483] ath: EEPROM regdomain: 0x8348
[ 61.787490] ath: EEPROM indicates we should expect a country code
[ 61.787493] ath: doing EEPROM country->regdmn map search
[ 61.787496] ath: country maps to regdmn code: 0x3a
[ 61.787498] ath: Country alpha2 being used: US
[ 61.787500] ath: Regpair used: 0x3a
[ 61.787503] ath: regdomain 0x8348 dynamically updated by country IE
[ 62.610924] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 101.291567] wlxe8de2708b22a: authenticate with 14:dd:a9:99:9e:64
[ 101.342935] wlxe8de2708b22a: send auth to 14:dd:a9:99:9e:64 (try 1/3)
[ 101.381195] wlxe8de2708b22a: send auth to 14:dd:a9:99:9e:64 (try 2/3)
[ 101.411694] wlxe8de2708b22a: send auth to 14:dd:a9:99:9e:64 (try 3/3)
[ 101.441073] wlxe8de2708b22a: authentication with 14:dd:a9:99:9e:64 timed out
[ 101.810855] wlxe8de2708b22a: authenticate with 54:04:a6:d3:42:0d
[ 101.906832] wlxe8de2708b22a: send auth to 54:04:a6:d3:42:0d (try 1/3)
[ 101.916387] wlxe8de2708b22a: authenticated
[ 101.920210] wlxe8de2708b22a: associate with 54:04:a6:d3:42:0d (try 1/3)
[ 101.921948] wlxe8de2708b22a: RX AssocResp from 54:04:a6:d3:42:0d
(capab=0x831 status=0 aid=1)
[ 101.933446] wlxe8de2708b22a: associated
[ 101.939162] ath: EEPROM regdomain: 0x8348
[ 101.939168] ath: EEPROM indicates we should expect a country code
[ 101.939171] ath: doing EEPROM country->regdmn map search
[ 101.939174] ath: country maps to regdmn code: 0x3a
[ 101.939176] ath: Country alpha2 being used: US
[ 101.939178] ath: Regpair used: 0x3a
[ 101.939182] ath: regdomain 0x8348 dynamically updated by country IE
[ 201.264190] EXT4-fs (sda2): mounting ext2 file system using the ext4
subsystem
[ 201.274280] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 475.232628] kactivitymanage[2110]: segfault at 7fdfbb8fbcd0 ip
00007fdfa09cf261 sp 00007ffe597007d8 error 4 in
libQt5Sql.so.5.5.1[7fdfa09bb000+3f000]
[ 486.500174] usb 4-1: USB disconnect, device number 2
[ 486.500734] cdrom: issuing MRW background format suspend
[ 675.648212] perf interrupt took too long (2506 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: UL30A
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 212
board_vendor: ASUSTeK Computer Inc.
board_name: UL30A
board_version: 1.0
** Loaded modules:
hmac(E)
drbg(E)
ansi_cprng(E)
ctr(E)
ccm(E)
cpufreq_stats(E)
cpufreq_powersave(E)
cpufreq_userspace(E)
cpufreq_conservative(E)
cachefiles(E)
fscache(E)
rt2800usb(E)
rt2x00usb(E)
rt2800lib(E)
rt2x00lib(E)
crc_ccitt(E)
sr_mod(E)
cdrom(E)
uvcvideo(E)
videobuf2_vmalloc(E)
videobuf2_memops(E)
videobuf2_v4l2(E)
videobuf2_core(E)
videodev(E)
media(E)
usb_storage(E)
joydev(E)
arc4(E)
iTCO_wdt(E)
ath9k(E)
ath9k_common(E)
iTCO_vendor_support(E)
ath9k_hw(E)
ath(E)
kvm_intel(E)
mac80211(E)
kvm(E)
snd_hda_codec_hdmi(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
irqbypass(E)
psmouse(E)
cfg80211(E)
snd_hda_intel(E)
pcspkr(E)
snd_hda_codec(E)
sg(E)
snd_hda_core(E)
lpc_ich(E)
snd_hwdep(E)
snd_pcm(E)
i915(E)
mfd_core(E)
snd_timer(E)
atl1c(E)
snd(E)
ehci_pci(E)
uhci_hcd(E)
ehci_hcd(E)
shpchp(E)
asus_laptop(E)
sparse_keymap(E)
rfkill(E)
input_polldev(E)
soundcore(E)
usbcore(E)
usb_common(E)
drm_kms_helper(E)
drm(E)
i2c_algo_bit(E)
battery(E)
fjes(E)
video(E)
ac(E)
button(E)
acpi_cpufreq(E)
tpm_tis(E)
tpm(E)
processor(E)
tcp_illinois(E)
coretemp(E)
loop(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
crc32c_generic(E)
cbc(E)
dm_crypt(E)
dm_mod(E)
md_mod(E)
sd_mod(E)
ahci(E)
libahci(E)
libata(E)
scsi_mod(E)
evdev(E)
serio_raw(E)
thermal(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: ASUSTeK Computer Inc. Mobile 4 Series Chipset Memory
Controller Hub [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Mobile 4 Series Chipset Integrated
Graphics Controller [1043:1862]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: ASUSTeK Computer Inc. Mobile 4 Series Chipset Integrated
Graphics Controller [1043:1862]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB2 EHCI
Controller [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) HD Audio
Controller [1043:1443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000bde00000-00000000bdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB2 EHCI
Controller [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe9fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller
[8086:2917] (rev 03)
Subsystem: ASUSTeK Computer Inc. ICH9M-E LPC Interface Controller
[1043:1c47]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E)
4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 82801IBM/IEM (ICH9M/ICH9M-E) 4 port
SATA Controller [AHCI mode] [1043:1c47]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=32]
Region 5: Memory at fe9fb000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network
Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or
Half-size Mini PCIe Card [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet
[1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. AR8132 Fast Ethernet [1043:14e5]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
** USB devices:
Bus 004 Device 003: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless
Adapter
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f2:b036 Chicony Electronics Co., Ltd Asus Integrated
0.3M UVC Webcam
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing'), (150, 'unstable'), (125, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.5.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.5.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.5.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.5.0-1-amd64 suggests:
ii debian-kernel-handbook 1.0.17
ii grub-pc 2.02~beta2-36
ii linux-doc-4.5 4.5.1-1
Versions of packages linux-image-4.5.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree [firmware-ralink] 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.5.0-1-amd64/prerm/removing-running-kernel-4.5.0-1-amd64: true
--- End Message ---
--- Begin Message ---
On Sat, 2016-04-23 at 20:14 -0400, Anthony DeRobertis wrote:
> Package: src:linux
> Version: 4.5.1-1
> Severity: normal
> File: /lib/modules/4.5.0-1-amd64/kernel/drivers/acpi/thermal.ko
>
> thermal: module verification failed: signature and/or required
> key missing - tainting kernel
> thermal LNXTHERM:00: registered as thermal_zone0
> ACPI: Thermal Zone [THRM] (51 C)
>
> Not sure how to check if the module is signed... but maybe it somehow
> got built w/o a signature?
[...]
The signatures are packaged separately, and this error is currently
expected. See
<https://www.decadent.org.uk/ben/blog/experiments-with-signed-kernels-and-modules-in-debian.html>.
Ben.
--
Ben Hutchings
Larkinson's Law: All laws are basically false.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
