Your message dated Wed, 20 Jul 2016 02:23:47 +0100
with message-id <[email protected]>
and subject line Re: Bug#831824: linux-image-4.1.0-2-686-pae: /proc/version is
incomprehensible
has caused the Debian Bug report #831824,
regarding linux-image-4.1.0-2-686-pae: /proc/version is incomprehensible
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
831824: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=831824
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.1.6-1
Severity: minor
Dear Maintainer,
$ cat /proc/version
Linux version 4.1.0-2-686-pae ([email protected]) (gcc version
4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)
>From this is unclear whether my Linux version is 4.1.0 or 4.1.6.
Please change this message to be more clear.
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.1.0-2-686-pae ([email protected]) (gcc version
4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-2-686-pae
root=UUID=54902130-d49b-4173-bb4f-5eacb0595474 ro selinux=1 security=selinux
quiet
** Not tainted
** Kernel log:
[31034.375397] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[31518.427577] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[33066.805693] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[34266.687991] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[36140.230214] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[36570.151295] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[36693.418448] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[37151.422586] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[37642.704785] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[38249.014819] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[38394.332586] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[40575.172769] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[41231.592303] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[41781.792279] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[41989.220229] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[43192.855604] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[43574.685787] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[46238.408797] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[47343.823884] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[48533.427944] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[49298.097807] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[50473.718467] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[50795.128879] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[52643.539860] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[54768.755332] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[55332.141717] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[56289.194742] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[59067.560932] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[59166.758744] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[59280.000008] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[59822.184868] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[60248.096370] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[60976.655962] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[61635.078210] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[61702.179371] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[61733.242544] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[63050.455686] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[63149.669395] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[64156.860094] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[65692.644539] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[66449.287196] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[66776.998194] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[67848.333823] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[68318.350437] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[68365.451893] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[68774.816243] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[68882.041087] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[69738.882858] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[70331.177209] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[70947.235166] perf interrupt took too long (2505 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[71253.578065] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[73335.047973] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[73600.604688] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[73703.823978] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[73843.125422] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[75044.685509] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[77641.286592] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[78007.062494] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[79130.462288] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[79237.695150] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[79677.638118] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[80207.794244] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[81027.383619] usb 1-1-port3: disabled by hub (EMI?), re-enabling...
[81027.383627] usb 1-1.3: USB disconnect, device number 3
[81027.700511] usb 1-1.3: new low-speed USB device number 6 using ehci-pci
[81027.799079] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0016
[81027.799084] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[81027.799087] usb 1-1.3: Product: USB Keyboard
[81027.799089] usb 1-1.3: Manufacturer: SIGMACHIP
[81027.802867] input: SIGMACHIP USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0016.0005/input/input20
[81027.857198] hid-generic 0003:1C4F:0016.0005: input,hidraw0: USB HID v1.10
Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[81037.870894] hid-generic 0003:1C4F:0016.0006: usb_submit_urb(ctrl) failed: -1
[81037.870917] hid-generic 0003:1C4F:0016.0006: timeout initializing reports
[81037.871198] input: SIGMACHIP USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0016.0006/input/input21
[81037.927115] hid-generic 0003:1C4F:0016.0006: input,hidraw1: USB HID v1.10
Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.3/input1
[82006.155659] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[82778.331916] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[85386.467606] show_signal_msg: 186 callbacks suppressed
[85386.467620] xneur[2255]: segfault at 0 ip b6ee8406 sp bf9126d4 error 4 in
libc-2.22.so[b6e68000+1b1000]
[85628.822319] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[85796.166784] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[86169.977946] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[87554.372495] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[87715.712419] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[88007.329284] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[88341.052888] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[89019.535044] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[89042.579047] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[89885.393382] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[90699.051118] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[90912.515533] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[91031.769109] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[91106.921474] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[92482.499841] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[92523.584869] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[93817.241552] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[94239.155481] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[94256.187037] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[94345.374845] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
[94649.020666] usb 1-1.4: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110
** Model information
not available
** Loaded modules:
fuse
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
snd_hda_codec_hdmi
binfmt_misc
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
kvm_intel
kvm
snd_hda_codec_realtek
snd_hda_codec_generic
crc32_pclmul
nouveau
iTCO_wdt
iTCO_vendor_support
mxm_wmi
aesni_intel
wmi
video
aes_i586
ttm
drm_kms_helper
gspca_t613
xts
lrw
gspca_main
drm
gf128mul
snd_hda_intel
videodev
ablk_helper
media
lpc_ich
evdev
joydev
cryptd
pcspkr
serio_raw
i2c_algo_bit
snd_hda_controller
mfd_core
snd_hda_codec
sg
i2c_i801
snd_hda_core
snd_hwdep
snd_pcm_oss
snd_mixer_oss
shpchp
snd_pcm
snd_timer
snd
soundcore
mei_me
mei
8250_fintek
processor
button
thermal_sys
coretemp
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
hid_generic
usbhid
hid
ahci
libahci
xhci_pci
crc32c_intel
ehci_pci
libata
xhci_hcd
firewire_ohci
ehci_hcd
scsi_mod
usbcore
firewire_core
r8169
crc_itu_t
mii
usb_common
floppy
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0100] (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f9000000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset
Family MEI Controller [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 35
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset
Family High Definition Audio Controller [1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cf800000-cf9fffff
Prefetchable memory behind bridge: 00000000cfa00000-00000000cfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fbc00000-fbcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC
Controller [8086:1c4a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd H67 Express Chipset Family LPC
Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset
Family SATA AHCI Controller [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 34
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=32]
Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset
Family SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce
8400 GS Rev. 3] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:066d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at fa000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio
Controller [10de:0be3] (rev a1)
Subsystem: NVIDIA Corporation G98 [GeForce 8400GS] [10de:066d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device
[1283:8892] (rev 10) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fbdf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
06:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd uPD720200 USB 3.0 Host
Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbcfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 17a1:0128
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical
Mouse Controller (3-button)
Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
Bus 001 Device 006: ID 1c4f:0016 SiGma Micro
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'unstable'),
(500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.1.0-2-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.1.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.3
Versions of packages linux-image-4.1.0-2-686-pae recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
ii libc6 [libc6-i686] 2.22-11
Versions of packages linux-image-4.1.0-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-14
ii grub-pc 2.02~beta2-36
pn linux-doc-4.1 <none>
Versions of packages linux-image-4.1.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
ii firmware-ivtv 20160110-1
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 20160110-1
ii firmware-misc-nonfree [firmware-ralink] 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160110-1
pn xen-hypervisor <none>
-- debconf information excluded
--- End Message ---
--- Begin Message ---
On Tue, 2016-07-19 at 23:33 +0300, Victor Porton wrote:
> Package: src:linux
> Version: 4.1.6-1
> Severity: minor
>
> Dear Maintainer,
>
> $ cat /proc/version
> Linux version 4.1.0-2-686-pae ([email protected]) (gcc
> version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)
>
> > From this is unclear whether my Linux version is 4.1.0 or 4.1.6.
Either way, it's time to upgrade...
> Please change this message to be more clear.
Unfortunately there are technical reasons why we can't do this.
This won't change any time soon
Ben.
--
Ben Hutchings
The first rule of tautology club is the first rule of tautology club.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
