reassign 909852 src:linux thanks On Sat, Sep 29, 2018 at 05:36:15PM +0200, [email protected] wrote: > Package: linux-image-4.18-0-0.bpo.1-amd64 > Version: linux-image-4.18.0-0.bpo.1-amd64 > Severity: minor > > Dear Maintainer, > > Today i tried a suspend on my system and it resulted in backtrace in dmesg, > but system was not affected by this. According the backtrace it was some > trouble with amdgpu. I'we tried few times again but the backtrace did not > appear again without rebooting the system. I dont know yet what triggered > this. > I attaching a file with information from dmesg. > > Thank you for your time > > I hope this helps improve debians stability. > -- System Information: > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'stable') > Architecture: amd64 (x86_64) > > Kernel: Linux 4.18.0-0.bpo.1-amd64 (SMP w/4 CPU cores) > Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), > LANGUAGE=en_US.utf8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system)
> 2018-09-29T14:22:10.192483+02:00 debian kernel: [ 9243.482562] PM: suspend > entry (deep) > 2018-09-29T14:22:20.898486+02:00 debian kernel: [ 9243.482565] PM: Syncing > filesystems ... done. > 2018-09-29T14:22:20.898568+02:00 debian kernel: [ 9243.527463] Freezing user > space processes ... (elapsed 0.002 seconds) done. > 2018-09-29T14:22:20.898571+02:00 debian kernel: [ 9243.530090] OOM killer > disabled. > 2018-09-29T14:22:20.898573+02:00 debian kernel: [ 9243.530092] Freezing > remaining freezable tasks ... (elapsed 0.002 seconds) done. > 2018-09-29T14:22:20.898573+02:00 debian kernel: [ 9243.532308] Suspending > console(s) (use no_console_suspend to debug) > 2018-09-29T14:22:20.898574+02:00 debian kernel: [ 9243.553250] sd 1:0:0:0: > [sda] Synchronizing SCSI cache > 2018-09-29T14:22:20.898592+02:00 debian kernel: [ 9243.553251] sd 2:0:0:0: > [sdb] Synchronizing SCSI cache > 2018-09-29T14:22:20.898593+02:00 debian kernel: [ 9243.553483] sd 2:0:0:0: > [sdb] Stopping disk > 2018-09-29T14:22:20.898594+02:00 debian kernel: [ 9243.575594] sd 1:0:0:0: > [sda] Stopping disk > 2018-09-29T14:22:20.898595+02:00 debian kernel: [ 9243.707832] amdgpu > 0000:00:01.0: 0000000083582941 unpin not necessary > 2018-09-29T14:22:20.898596+02:00 debian kernel: [ 9244.333090] > pci_raw_set_power_state: 5 callbacks suppressed > 2018-09-29T14:22:20.898597+02:00 debian kernel: [ 9244.333095] snd_hda_intel > 0000:00:09.2: Refused to change power state, currently in D0 > 2018-09-29T14:22:20.898598+02:00 debian kernel: [ 9244.393115] ACPI: > Preparing to enter system sleep state S3 > 2018-09-29T14:22:20.898599+02:00 debian kernel: [ 9244.707658] PM: Saving > platform NVS memory > 2018-09-29T14:22:20.898600+02:00 debian kernel: [ 9244.707748] Disabling > non-boot CPUs ... > 2018-09-29T14:22:20.898600+02:00 debian kernel: [ 9244.721578] IRQ 26: no > longer affine to CPU1 > 2018-09-29T14:22:20.898601+02:00 debian kernel: [ 9244.721589] IRQ 37: no > longer affine to CPU1 > 2018-09-29T14:22:20.898602+02:00 debian kernel: [ 9244.721593] IRQ 38: no > longer affine to CPU1 > 2018-09-29T14:22:20.898603+02:00 debian kernel: [ 9244.721598] IRQ 40: no > longer affine to CPU1 > 2018-09-29T14:22:20.898603+02:00 debian kernel: [ 9244.721603] IRQ 42: no > longer affine to CPU1 > 2018-09-29T14:22:20.898604+02:00 debian kernel: [ 9244.721609] IRQ 43: no > longer affine to CPU1 > 2018-09-29T14:22:20.898605+02:00 debian kernel: [ 9244.721613] IRQ 44: no > longer affine to CPU1 > 2018-09-29T14:22:20.898605+02:00 debian kernel: [ 9244.722702] smpboot: CPU 1 > is now offline > 2018-09-29T14:22:20.898606+02:00 debian kernel: [ 9244.745468] IRQ 19: no > longer affine to CPU2 > 2018-09-29T14:22:20.898607+02:00 debian kernel: [ 9244.745509] IRQ 52: no > longer affine to CPU2 > 2018-09-29T14:22:20.898607+02:00 debian kernel: [ 9244.746527] smpboot: CPU 2 > is now offline > 2018-09-29T14:22:20.898608+02:00 debian kernel: [ 9244.769420] IRQ 1: no > longer affine to CPU3 > 2018-09-29T14:22:20.898609+02:00 debian kernel: [ 9244.770494] smpboot: CPU 3 > is now offline > 2018-09-29T14:22:20.898609+02:00 debian kernel: [ 9244.771422] ACPI: > Low-level resume complete > 2018-09-29T14:22:20.898610+02:00 debian kernel: [ 9244.771457] PM: Restoring > platform NVS memory > 2018-09-29T14:22:20.898611+02:00 debian kernel: [ 9244.771540] LVT offset 0 > assigned for vector 0x400 > 2018-09-29T14:22:20.898611+02:00 debian kernel: [ 9244.771756] Enabling > non-boot CPUs ... > 2018-09-29T14:22:20.898612+02:00 debian kernel: [ 9244.771796] x86: Booting > SMP configuration: > 2018-09-29T14:22:20.898613+02:00 debian kernel: [ 9244.771797] smpboot: > Booting Node 0 Processor 1 APIC 0x11 > 2018-09-29T14:22:20.898614+02:00 debian kernel: [ 9244.774098] cache: parent > cpu1 should not be sleeping > 2018-09-29T14:22:20.898615+02:00 debian kernel: [ 9244.774169] microcode: > CPU1: patch_level=0x06006118 > 2018-09-29T14:22:20.898615+02:00 debian kernel: [ 9244.774294] CPU1 is up > 2018-09-29T14:22:20.898616+02:00 debian kernel: [ 9244.774319] smpboot: > Booting Node 0 Processor 2 APIC 0x12 > 2018-09-29T14:22:20.898617+02:00 debian kernel: [ 9244.776750] cache: parent > cpu2 should not be sleeping > 2018-09-29T14:22:20.898617+02:00 debian kernel: [ 9244.776825] microcode: > CPU2: patch_level=0x06006118 > 2018-09-29T14:22:20.898618+02:00 debian kernel: [ 9244.776977] CPU2 is up > 2018-09-29T14:22:20.898619+02:00 debian kernel: [ 9244.776993] smpboot: > Booting Node 0 Processor 3 APIC 0x13 > 2018-09-29T14:22:20.898619+02:00 debian kernel: [ 9244.779286] cache: parent > cpu3 should not be sleeping > 2018-09-29T14:22:20.898620+02:00 debian kernel: [ 9244.779359] microcode: > CPU3: patch_level=0x06006118 > 2018-09-29T14:22:20.898620+02:00 debian kernel: [ 9244.779512] CPU3 is up > 2018-09-29T14:22:20.898621+02:00 debian kernel: [ 9244.780017] ACPI: Waking > up from system sleep state S3 > 2018-09-29T14:22:20.898622+02:00 debian kernel: [ 9244.887531] [drm] PCIE > GART of 1024M enabled (table at 0x000000F400000000). > 2018-09-29T14:22:20.898622+02:00 debian kernel: [ 9244.887548] usb usb3: root > hub lost power or was reset > 2018-09-29T14:22:20.898623+02:00 debian kernel: [ 9244.887550] usb usb4: root > hub lost power or was reset > 2018-09-29T14:22:20.898624+02:00 debian kernel: [ 9244.897629] sd 1:0:0:0: > [sda] Starting disk > 2018-09-29T14:22:20.898624+02:00 debian kernel: [ 9244.897630] sd 2:0:0:0: > [sdb] Starting disk > 2018-09-29T14:22:20.898625+02:00 debian kernel: [ 9244.959785] [drm] SADs > count is: -2, don't need to read it > 2018-09-29T14:22:20.898626+02:00 debian kernel: [ 9244.960799] WARNING: CPU: > 3 PID: 23442 at > /build/linux-GVmoCH/linux-4.18.6/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:710 > dm_resume+0x1b7/0x230 [amdgpu] > 2018-09-29T14:22:20.898627+02:00 debian kernel: [ 9244.960800] Modules linked > in: pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) xt_tcpudp > xt_conntrack iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat > nf_conntrack iptable_filter binfmt_misc dm_thin_pool dm_persistent_data > dm_bio_prison dm_bufio amdkfd eeepc_wmi libcrc32c asus_wmi sparse_keymap > amdgpu rfkill wmi_bmof edac_mce_amd kvm_amd ccp chash gpu_sched ttm rng_core > snd_hda_codec_realtek kvm drm_kms_helper snd_hda_codec_generic > snd_hda_codec_hdmi snd_hda_intel irqbypass snd_hda_codec drm crct10dif_pclmul > crc32_pclmul snd_hda_core ghash_clmulni_intel pcspkr evdev snd_hwdep sg > serio_raw snd_pcm i2c_algo_bit snd_timer k10temp fam15h_power snd wmi video > soundcore sp5100_tco button pcc_cpufreq acpi_cpufreq parport_pc ppdev lp > parport ip_tables x_tables autofs4 ext4 crc16 > 2018-09-29T14:22:20.898628+02:00 debian kernel: [ 9244.960835] mbcache jbd2 > crc32c_generic fscrypto ecb sr_mod cdrom dm_mod hid_generic uas usbhid > usb_storage hid sd_mod crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd > glue_helper ahci xhci_pci libahci xhci_hcd i2c_piix4 libata r8169 mii usbcore > scsi_mod usb_common gpio_amdpt gpio_generic > 2018-09-29T14:22:20.898629+02:00 debian kernel: [ 9244.960854] CPU: 3 PID: > 23442 Comm: kworker/u32:26 Tainted: G O 4.18.0-0.bpo.1-amd64 > #1 Debian 4.18.6-1~bpo9+1 > 2018-09-29T14:22:20.898631+02:00 debian kernel: [ 9244.960855] Hardware name: > System manufacturer System Product Name/PRIME A320M-K, BIOS 3401 12/04/2017 > 2018-09-29T14:22:20.898631+02:00 debian kernel: [ 9244.960858] Workqueue: > events_unbound async_run_entry_fn > 2018-09-29T14:22:20.898632+02:00 debian kernel: [ 9244.960895] RIP: > 0010:dm_resume+0x1b7/0x230 [amdgpu] > 2018-09-29T14:22:20.898633+02:00 debian kernel: [ 9244.960896] Code: ef e8 6d > 03 af ff 48 c7 83 b0 b7 00 00 00 00 00 00 89 c5 48 89 df e8 38 1a 00 00 89 e8 > 5b 5d 41 5c 41 5d 41 5e c3 0f 0b eb ac <0f> 0b e9 44 ff ff ff 4d 8d b4 24 40 > 0d 00 00 4c 89 f7 e8 62 29 2f > 2018-09-29T14:22:20.898634+02:00 debian kernel: [ 9244.960911] RSP: > 0018:ffff9d944309fd40 EFLAGS: 00010202 > 2018-09-29T14:22:20.898635+02:00 debian kernel: [ 9244.960912] RAX: > 0000000000000002 RBX: ffff917b584c0000 RCX: 0000000000000003 > 2018-09-29T14:22:20.898635+02:00 debian kernel: [ 9244.960913] RDX: > 0000000000000003 RSI: ffff917a61251900 RDI: ffff917ad3267c00 > 2018-09-29T14:22:20.898637+02:00 debian kernel: [ 9244.960913] RBP: > ffff917b585e4000 R08: 0000000000024e60 R09: ffffffffc0c4590d > 2018-09-29T14:22:20.898638+02:00 debian kernel: [ 9244.960914] R10: > ffffe85ec21653c0 R11: 0000000000000001 R12: 0000000000000000 > 2018-09-29T14:22:20.898639+02:00 debian kernel: [ 9244.960914] R13: > ffff917b55ec0800 R14: ffff917b58f6fd40 R15: ffffffff8b6a4fff > 2018-09-29T14:22:20.898639+02:00 debian kernel: [ 9244.960915] FS: > 0000000000000000(0000) GS:ffff917b5aac0000(0000) knlGS:0000000000000000 > 2018-09-29T14:22:20.898640+02:00 debian kernel: [ 9244.960916] CS: 0010 DS: > 0000 ES: 0000 CR0: 0000000080050033 > 2018-09-29T14:22:20.898641+02:00 debian kernel: [ 9244.960917] CR2: > 0000000000000000 CR3: 000000002f80a000 CR4: 00000000001406e0 > 2018-09-29T14:22:20.898642+02:00 debian kernel: [ 9244.960917] Call Trace: > 2018-09-29T14:22:20.898642+02:00 debian kernel: [ 9244.960946] > amdgpu_device_ip_resume_phase2+0x58/0xb0 [amdgpu] > 2018-09-29T14:22:20.898643+02:00 debian kernel: [ 9244.960971] > amdgpu_device_resume+0xbb/0x360 [amdgpu] > 2018-09-29T14:22:20.898644+02:00 debian kernel: [ 9244.960974] ? > pci_add_dynid+0x100/0x100 > 2018-09-29T14:22:20.898645+02:00 debian kernel: [ 9244.960976] > dpm_run_callback+0x4f/0x170 > 2018-09-29T14:22:20.898645+02:00 debian kernel: [ 9244.960977] > device_resume+0x93/0x180 > 2018-09-29T14:22:20.898646+02:00 debian kernel: [ 9244.960978] > async_resume+0x19/0x40 > 2018-09-29T14:22:20.898647+02:00 debian kernel: [ 9244.960980] > async_run_entry_fn+0x39/0x160 > 2018-09-29T14:22:20.898648+02:00 debian kernel: [ 9244.960981] > process_one_work+0x191/0x370 > 2018-09-29T14:22:20.898648+02:00 debian kernel: [ 9244.960983] > worker_thread+0x4f/0x3b0 > 2018-09-29T14:22:20.898649+02:00 debian kernel: [ 9244.960984] > kthread+0xf8/0x130 > 2018-09-29T14:22:20.898650+02:00 debian kernel: [ 9244.960985] ? > rescuer_thread+0x340/0x340 > 2018-09-29T14:22:20.898650+02:00 debian kernel: [ 9244.960986] ? > kthread_create_worker_on_cpu+0x70/0x70 > 2018-09-29T14:22:20.898651+02:00 debian kernel: [ 9244.960988] > ret_from_fork+0x22/0x40 > 2018-09-29T14:22:20.898652+02:00 debian kernel: [ 9244.960989] ---[ end trace > f6a0a74fed7e32b3 ]--- > 2018-09-29T14:22:20.898652+02:00 debian kernel: [ 9245.088138] r8169 > 0000:05:00.0 enp5s0: link down > 2018-09-29T14:22:20.898653+02:00 debian kernel: [ 9245.132609] [drm] UVD > initialized successfully. > 2018-09-29T14:22:20.898653+02:00 debian kernel: [ 9245.200367] ata6: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:22:20.898655+02:00 debian kernel: [ 9245.201529] ata1: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:22:20.898655+02:00 debian kernel: [ 9245.297626] usb 3-5: reset > high-speed USB device number 2 using xhci_hcd > 2018-09-29T14:22:20.898656+02:00 debian kernel: [ 9245.331839] [drm] VCE > initialized successfully. > 2018-09-29T14:22:20.898657+02:00 debian kernel: [ 9245.361544] ata7: SATA > link up 1.5 Gbps (SStatus 113 SControl 300) > 2018-09-29T14:22:20.898658+02:00 debian kernel: [ 9245.378415] ata7.00: > configured for UDMA/100 > 2018-09-29T14:22:20.898659+02:00 debian kernel: [ 9245.781674] usb 3-6: reset > low-speed USB device number 3 using xhci_hcd > 2018-09-29T14:22:20.898660+02:00 debian kernel: [ 9246.183935] acpi > LNXPOWER:07: Turning OFF > 2018-09-29T14:22:20.898661+02:00 debian kernel: [ 9246.183986] OOM killer > enabled. > 2018-09-29T14:22:20.898661+02:00 debian kernel: [ 9246.183987] Restarting > tasks ... done. > 2018-09-29T14:22:20.898662+02:00 debian kernel: [ 9246.185543] PM: suspend > exit > 2018-09-29T14:22:21.834548+02:00 debian kernel: [ 9247.121404] ata2: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:22:21.858704+02:00 debian kernel: [ 9247.148930] ata2.00: > configured for UDMA/133 > 2018-09-29T14:22:22.378653+02:00 debian kernel: [ 9247.665634] ata3: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:22:22.446682+02:00 debian kernel: [ 9247.736323] ata3.00: > configured for UDMA/133 > 2018-09-29T14:22:22.550624+02:00 debian kernel: [ 9247.838692] Process > accounting resumed > 2018-09-29T14:22:22.638565+02:00 debian kernel: [ 9247.928941] r8169 > 0000:05:00.0 enp5s0: link up > 2018-09-29T14:25:39.290567+02:00 debian kernel: [ 9444.578246] PM: suspend > entry (deep) > 2018-09-29T14:25:47.891362+02:00 debian kernel: [ 9444.578250] PM: Syncing > filesystems ... done. > 2018-09-29T14:25:47.891426+02:00 debian kernel: [ 9444.740309] Freezing user > space processes ... (elapsed 0.002 seconds) done. > 2018-09-29T14:25:47.891427+02:00 debian kernel: [ 9444.743133] OOM killer > disabled. > 2018-09-29T14:25:47.891428+02:00 debian kernel: [ 9444.743135] Freezing > remaining freezable tasks ... (elapsed 0.002 seconds) done. > 2018-09-29T14:25:47.891429+02:00 debian kernel: [ 9444.745536] Suspending > console(s) (use no_console_suspend to debug) > 2018-09-29T14:25:47.891429+02:00 debian kernel: [ 9444.769995] sd 2:0:0:0: > [sdb] Synchronizing SCSI cache > 2018-09-29T14:25:47.891430+02:00 debian kernel: [ 9444.773770] sd 1:0:0:0: > [sda] Synchronizing SCSI cache > 2018-09-29T14:25:47.891431+02:00 debian kernel: [ 9444.774236] sd 1:0:0:0: > [sda] Stopping disk > 2018-09-29T14:25:47.891431+02:00 debian kernel: [ 9444.800129] sd 2:0:0:0: > [sdb] Stopping disk > 2018-09-29T14:25:47.891432+02:00 debian kernel: [ 9444.853105] amdgpu > 0000:00:01.0: 0000000083582941 unpin not necessary > 2018-09-29T14:25:47.891432+02:00 debian kernel: [ 9445.501735] snd_hda_intel > 0000:00:09.2: Refused to change power state, currently in D0 > 2018-09-29T14:25:47.891433+02:00 debian kernel: [ 9445.561716] ACPI: > Preparing to enter system sleep state S3 > 2018-09-29T14:25:47.891434+02:00 debian kernel: [ 9445.892471] PM: Saving > platform NVS memory > 2018-09-29T14:25:47.891434+02:00 debian kernel: [ 9445.892562] Disabling > non-boot CPUs ... > 2018-09-29T14:25:47.891435+02:00 debian kernel: [ 9445.906258] > irq_migrate_all_off_this_cpu: 9 callbacks suppressed > 2018-09-29T14:25:47.891435+02:00 debian kernel: [ 9445.906261] IRQ 19: no > longer affine to CPU1 > 2018-09-29T14:25:47.891436+02:00 debian kernel: [ 9445.906274] IRQ 36: no > longer affine to CPU1 > 2018-09-29T14:25:47.891436+02:00 debian kernel: [ 9445.906281] IRQ 37: no > longer affine to CPU1 > 2018-09-29T14:25:47.891437+02:00 debian kernel: [ 9445.906290] IRQ 43: no > longer affine to CPU1 > 2018-09-29T14:25:47.891438+02:00 debian kernel: [ 9445.906296] IRQ 44: no > longer affine to CPU1 > 2018-09-29T14:25:47.891438+02:00 debian kernel: [ 9445.907406] smpboot: CPU 1 > is now offline > 2018-09-29T14:25:47.891439+02:00 debian kernel: [ 9445.930092] IRQ 41: no > longer affine to CPU2 > 2018-09-29T14:25:47.891439+02:00 debian kernel: [ 9445.930100] IRQ 42: no > longer affine to CPU2 > 2018-09-29T14:25:47.891440+02:00 debian kernel: [ 9445.931132] smpboot: CPU 2 > is now offline > 2018-09-29T14:25:47.891440+02:00 debian kernel: [ 9445.954006] IRQ 1: no > longer affine to CPU3 > 2018-09-29T14:25:47.891441+02:00 debian kernel: [ 9445.954014] IRQ 8: no > longer affine to CPU3 > 2018-09-29T14:25:47.891442+02:00 debian kernel: [ 9445.954017] IRQ 9: no > longer affine to CPU3 > 2018-09-29T14:25:47.891442+02:00 debian kernel: [ 9445.955080] smpboot: CPU 3 > is now offline > 2018-09-29T14:25:47.891443+02:00 debian kernel: [ 9445.956003] ACPI: > Low-level resume complete > 2018-09-29T14:25:47.891443+02:00 debian kernel: [ 9445.956037] PM: Restoring > platform NVS memory > 2018-09-29T14:25:47.891444+02:00 debian kernel: [ 9445.956123] LVT offset 0 > assigned for vector 0x400 > 2018-09-29T14:25:47.891444+02:00 debian kernel: [ 9445.956332] Enabling > non-boot CPUs ... > 2018-09-29T14:25:47.891445+02:00 debian kernel: [ 9445.956372] x86: Booting > SMP configuration: > 2018-09-29T14:25:47.891446+02:00 debian kernel: [ 9445.956373] smpboot: > Booting Node 0 Processor 1 APIC 0x11 > 2018-09-29T14:25:47.891446+02:00 debian kernel: [ 9445.958698] cache: parent > cpu1 should not be sleeping > 2018-09-29T14:25:47.891447+02:00 debian kernel: [ 9445.958771] microcode: > CPU1: patch_level=0x06006118 > 2018-09-29T14:25:47.891447+02:00 debian kernel: [ 9445.958897] CPU1 is up > 2018-09-29T14:25:47.891448+02:00 debian kernel: [ 9445.958923] smpboot: > Booting Node 0 Processor 2 APIC 0x12 > 2018-09-29T14:25:47.891448+02:00 debian kernel: [ 9445.961365] cache: parent > cpu2 should not be sleeping > 2018-09-29T14:25:47.891449+02:00 debian kernel: [ 9445.961441] microcode: > CPU2: patch_level=0x06006118 > 2018-09-29T14:25:47.891450+02:00 debian kernel: [ 9445.961602] CPU2 is up > 2018-09-29T14:25:47.891450+02:00 debian kernel: [ 9445.961618] smpboot: > Booting Node 0 Processor 3 APIC 0x13 > 2018-09-29T14:25:47.891451+02:00 debian kernel: [ 9445.963929] cache: parent > cpu3 should not be sleeping > 2018-09-29T14:25:47.891452+02:00 debian kernel: [ 9445.963999] microcode: > CPU3: patch_level=0x06006118 > 2018-09-29T14:25:47.891452+02:00 debian kernel: [ 9445.964155] CPU3 is up > 2018-09-29T14:25:47.891453+02:00 debian kernel: [ 9445.964659] ACPI: Waking > up from system sleep state S3 > 2018-09-29T14:25:47.891454+02:00 debian kernel: [ 9446.071830] [drm] PCIE > GART of 1024M enabled (table at 0x000000F400000000). > 2018-09-29T14:25:47.891454+02:00 debian kernel: [ 9446.071850] usb usb3: root > hub lost power or was reset > 2018-09-29T14:25:47.891455+02:00 debian kernel: [ 9446.071853] usb usb4: root > hub lost power or was reset > 2018-09-29T14:25:47.891455+02:00 debian kernel: [ 9446.072524] sd 1:0:0:0: > [sda] Starting disk > 2018-09-29T14:25:47.891456+02:00 debian kernel: [ 9446.072549] sd 2:0:0:0: > [sdb] Starting disk > 2018-09-29T14:25:47.891457+02:00 debian kernel: [ 9446.100788] [drm] SADs > count is: -2, don't need to read it > 2018-09-29T14:25:47.891457+02:00 debian kernel: [ 9446.228930] r8169 > 0000:05:00.0 enp5s0: link down > 2018-09-29T14:25:47.891458+02:00 debian kernel: [ 9446.273631] [drm] UVD > initialized successfully. > 2018-09-29T14:25:47.891458+02:00 debian kernel: [ 9446.382548] ata1: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:25:47.891459+02:00 debian kernel: [ 9446.384163] ata6: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:25:47.891460+02:00 debian kernel: [ 9446.473028] [drm] VCE > initialized successfully. > 2018-09-29T14:25:47.891460+02:00 debian kernel: [ 9446.546160] ata7: SATA > link up 1.5 Gbps (SStatus 113 SControl 300) > 2018-09-29T14:25:47.891461+02:00 debian kernel: [ 9446.563054] ata7.00: > configured for UDMA/100 > 2018-09-29T14:25:47.891461+02:00 debian kernel: [ 9446.622315] usb 3-6: reset > low-speed USB device number 3 using xhci_hcd > 2018-09-29T14:25:47.891462+02:00 debian kernel: [ 9447.186416] usb 3-5: reset > high-speed USB device number 2 using xhci_hcd > 2018-09-29T14:25:47.891463+02:00 debian kernel: [ 9447.366312] OOM killer > enabled. > 2018-09-29T14:25:47.898591+02:00 debian kernel: [ 9447.366313] Restarting > tasks ... done. > 2018-09-29T14:25:47.898612+02:00 debian kernel: [ 9447.370812] PM: suspend > exit > 2018-09-29T14:25:47.930745+02:00 debian kernel: [ 9447.403704] Process > accounting resumed > 2018-09-29T14:25:48.394618+02:00 debian kernel: [ 9447.866164] ata2: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:25:48.422619+02:00 debian kernel: [ 9447.896919] ata2.00: > configured for UDMA/133 > 2018-09-29T14:25:49.358800+02:00 debian kernel: [ 9448.830185] ata3: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:25:49.426793+02:00 debian kernel: [ 9448.900483] ata3.00: > configured for UDMA/133 > 2018-09-29T14:25:49.590718+02:00 debian kernel: [ 9449.062339] r8169 > 0000:05:00.0 enp5s0: link up > 2018-09-29T14:27:04.894704+02:00 debian kernel: [ 9524.368002] PM: suspend > entry (deep) > 2018-09-29T14:27:18.834132+02:00 debian kernel: [ 9524.368004] PM: Syncing > filesystems ... done. > 2018-09-29T14:27:18.834197+02:00 debian kernel: [ 9524.528492] Freezing user > space processes ... (elapsed 0.002 seconds) done. > 2018-09-29T14:27:18.834198+02:00 debian kernel: [ 9524.531263] OOM killer > disabled. > 2018-09-29T14:27:18.834200+02:00 debian kernel: [ 9524.531264] Freezing > remaining freezable tasks ... (elapsed 0.002 seconds) done. > 2018-09-29T14:27:18.834201+02:00 debian kernel: [ 9524.533503] Suspending > console(s) (use no_console_suspend to debug) > 2018-09-29T14:27:18.834202+02:00 debian kernel: [ 9524.553961] sd 1:0:0:0: > [sda] Synchronizing SCSI cache > 2018-09-29T14:27:18.834202+02:00 debian kernel: [ 9524.554026] sd 2:0:0:0: > [sdb] Synchronizing SCSI cache > 2018-09-29T14:27:18.834203+02:00 debian kernel: [ 9524.556231] sd 1:0:0:0: > [sda] Stopping disk > 2018-09-29T14:27:18.834204+02:00 debian kernel: [ 9524.610986] amdgpu > 0000:00:01.0: 0000000083582941 unpin not necessary > 2018-09-29T14:27:18.834205+02:00 debian kernel: [ 9524.626555] sd 2:0:0:0: > [sdb] Stopping disk > 2018-09-29T14:27:18.834205+02:00 debian kernel: [ 9525.118305] ACPI: > Preparing to enter system sleep state S3 > 2018-09-29T14:27:18.834206+02:00 debian kernel: [ 9525.444738] PM: Saving > platform NVS memory > 2018-09-29T14:27:18.834207+02:00 debian kernel: [ 9525.444828] Disabling > non-boot CPUs ... > 2018-09-29T14:27:18.834208+02:00 debian kernel: [ 9525.458723] > irq_migrate_all_off_this_cpu: 8 callbacks suppressed > 2018-09-29T14:27:18.834209+02:00 debian kernel: [ 9525.458724] IRQ 19: no > longer affine to CPU1 > 2018-09-29T14:27:18.834209+02:00 debian kernel: [ 9525.458736] IRQ 36: no > longer affine to CPU1 > 2018-09-29T14:27:18.834210+02:00 debian kernel: [ 9525.458740] IRQ 37: no > longer affine to CPU1 > 2018-09-29T14:27:18.834211+02:00 debian kernel: [ 9525.458748] IRQ 43: no > longer affine to CPU1 > 2018-09-29T14:27:18.834212+02:00 debian kernel: [ 9525.458753] IRQ 44: no > longer affine to CPU1 > 2018-09-29T14:27:18.834212+02:00 debian kernel: [ 9525.459842] smpboot: CPU 1 > is now offline > 2018-09-29T14:27:18.834213+02:00 debian kernel: [ 9525.482879] IRQ 42: no > longer affine to CPU2 > 2018-09-29T14:27:18.834214+02:00 debian kernel: [ 9525.483926] smpboot: CPU 2 > is now offline > 2018-09-29T14:27:18.834214+02:00 debian kernel: [ 9525.510682] IRQ 1: no > longer affine to CPU3 > 2018-09-29T14:27:18.834215+02:00 debian kernel: [ 9525.510692] IRQ 8: no > longer affine to CPU3 > 2018-09-29T14:27:18.834215+02:00 debian kernel: [ 9525.510697] IRQ 9: no > longer affine to CPU3 > 2018-09-29T14:27:18.834216+02:00 debian kernel: [ 9525.510709] IRQ 26: no > longer affine to CPU3 > 2018-09-29T14:27:18.834217+02:00 debian kernel: [ 9525.511772] smpboot: CPU 3 > is now offline > 2018-09-29T14:27:18.834217+02:00 debian kernel: [ 9525.512590] ACPI: > Low-level resume complete > 2018-09-29T14:27:18.834218+02:00 debian kernel: [ 9525.512624] PM: Restoring > platform NVS memory > 2018-09-29T14:27:18.834219+02:00 debian kernel: [ 9525.512705] LVT offset 0 > assigned for vector 0x400 > 2018-09-29T14:27:18.834219+02:00 debian kernel: [ 9525.512923] Enabling > non-boot CPUs ... > 2018-09-29T14:27:18.834220+02:00 debian kernel: [ 9525.512963] x86: Booting > SMP configuration: > 2018-09-29T14:27:18.834221+02:00 debian kernel: [ 9525.512964] smpboot: > Booting Node 0 Processor 1 APIC 0x11 > 2018-09-29T14:27:18.834221+02:00 debian kernel: [ 9525.515275] cache: parent > cpu1 should not be sleeping > 2018-09-29T14:27:18.834222+02:00 debian kernel: [ 9525.515347] microcode: > CPU1: patch_level=0x06006118 > 2018-09-29T14:27:18.834222+02:00 debian kernel: [ 9525.515471] CPU1 is up > 2018-09-29T14:27:18.834223+02:00 debian kernel: [ 9525.515495] smpboot: > Booting Node 0 Processor 2 APIC 0x12 > 2018-09-29T14:27:18.834224+02:00 debian kernel: [ 9525.517945] cache: parent > cpu2 should not be sleeping > 2018-09-29T14:27:18.834224+02:00 debian kernel: [ 9525.518022] microcode: > CPU2: patch_level=0x06006118 > 2018-09-29T14:27:18.834225+02:00 debian kernel: [ 9525.518179] CPU2 is up > 2018-09-29T14:27:18.834226+02:00 debian kernel: [ 9525.518196] smpboot: > Booting Node 0 Processor 3 APIC 0x13 > 2018-09-29T14:27:18.834226+02:00 debian kernel: [ 9525.520505] cache: parent > cpu3 should not be sleeping > 2018-09-29T14:27:18.834227+02:00 debian kernel: [ 9525.520581] microcode: > CPU3: patch_level=0x06006118 > 2018-09-29T14:27:18.834227+02:00 debian kernel: [ 9525.520735] CPU3 is up > 2018-09-29T14:27:18.834228+02:00 debian kernel: [ 9525.521241] ACPI: Waking > up from system sleep state S3 > 2018-09-29T14:27:18.834229+02:00 debian kernel: [ 9525.627673] usb usb3: root > hub lost power or was reset > 2018-09-29T14:27:18.834229+02:00 debian kernel: [ 9525.627676] usb usb4: root > hub lost power or was reset > 2018-09-29T14:27:18.834230+02:00 debian kernel: [ 9525.628426] [drm] PCIE > GART of 1024M enabled (table at 0x000000F400000000). > 2018-09-29T14:27:18.834231+02:00 debian kernel: [ 9525.629201] sd 1:0:0:0: > [sda] Starting disk > 2018-09-29T14:27:18.834231+02:00 debian kernel: [ 9525.629223] sd 2:0:0:0: > [sdb] Starting disk > 2018-09-29T14:27:18.834232+02:00 debian kernel: [ 9525.657302] [drm] SADs > count is: -2, don't need to read it > 2018-09-29T14:27:18.834232+02:00 debian kernel: [ 9525.785757] r8169 > 0000:05:00.0 enp5s0: link down > 2018-09-29T14:27:18.834233+02:00 debian kernel: [ 9525.830618] [drm] UVD > initialized successfully. > 2018-09-29T14:27:18.834234+02:00 debian kernel: [ 9525.938669] ata1: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:27:18.834234+02:00 debian kernel: [ 9525.940870] ata6: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:27:18.834235+02:00 debian kernel: [ 9526.029985] [drm] VCE > initialized successfully. > 2018-09-29T14:27:18.834236+02:00 debian kernel: [ 9526.042872] usb 3-5: reset > high-speed USB device number 2 using xhci_hcd > 2018-09-29T14:27:18.834237+02:00 debian kernel: [ 9526.102731] ata7: SATA > link up 1.5 Gbps (SStatus 113 SControl 300) > 2018-09-29T14:27:18.834237+02:00 debian kernel: [ 9526.120137] ata7.00: > configured for UDMA/100 > 2018-09-29T14:27:18.834238+02:00 debian kernel: [ 9526.462859] usb 3-6: reset > low-speed USB device number 3 using xhci_hcd > 2018-09-29T14:27:18.834239+02:00 debian kernel: [ 9526.865244] OOM killer > enabled. > 2018-09-29T14:27:18.838565+02:00 debian kernel: [ 9526.865245] Restarting > tasks ... done. > 2018-09-29T14:27:18.838571+02:00 debian kernel: [ 9526.869575] PM: suspend > exit > 2018-09-29T14:27:18.870708+02:00 debian kernel: [ 9526.901504] Process > accounting resumed > 2018-09-29T14:27:20.422755+02:00 debian kernel: [ 9528.450779] ata3: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:27:20.498773+02:00 debian kernel: [ 9528.527894] ata3.00: > configured for UDMA/133 > 2018-09-29T14:27:20.534745+02:00 debian kernel: [ 9528.562769] ata2: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:27:20.563594+02:00 debian kernel: [ 9528.595470] ata2.00: > configured for UDMA/133 > 2018-09-29T14:27:20.586591+02:00 debian kernel: [ 9528.617200] r8169 > 0000:05:00.0 enp5s0: link up > 2018-09-29T14:29:25.870738+02:00 debian kernel: [ 9653.901323] PM: suspend > entry (deep) > 2018-09-29T14:29:34.822341+02:00 debian kernel: [ 9653.901325] PM: Syncing > filesystems ... done. > 2018-09-29T14:29:34.822407+02:00 debian kernel: [ 9654.075313] Freezing user > space processes ... (elapsed 0.002 seconds) done. > 2018-09-29T14:29:34.822409+02:00 debian kernel: [ 9654.078070] OOM killer > disabled. > 2018-09-29T14:29:34.822410+02:00 debian kernel: [ 9654.078071] Freezing > remaining freezable tasks ... (elapsed 0.002 seconds) done. > 2018-09-29T14:29:34.822411+02:00 debian kernel: [ 9654.080348] Suspending > console(s) (use no_console_suspend to debug) > 2018-09-29T14:29:34.822412+02:00 debian kernel: [ 9654.103420] sd 1:0:0:0: > [sda] Synchronizing SCSI cache > 2018-09-29T14:29:34.822413+02:00 debian kernel: [ 9654.103944] sd 1:0:0:0: > [sda] Stopping disk > 2018-09-29T14:29:34.822413+02:00 debian kernel: [ 9654.110945] sd 2:0:0:0: > [sdb] Synchronizing SCSI cache > 2018-09-29T14:29:34.822414+02:00 debian kernel: [ 9654.134520] amdgpu > 0000:00:01.0: 0000000083582941 unpin not necessary > 2018-09-29T14:29:34.822415+02:00 debian kernel: [ 9654.136111] sd 2:0:0:0: > [sdb] Stopping disk > 2018-09-29T14:29:34.822416+02:00 debian kernel: [ 9654.866844] snd_hda_intel > 0000:00:09.2: Refused to change power state, currently in D0 > 2018-09-29T14:29:34.822416+02:00 debian kernel: [ 9654.922905] ACPI: > Preparing to enter system sleep state S3 > 2018-09-29T14:29:34.822417+02:00 debian kernel: [ 9655.237734] PM: Saving > platform NVS memory > 2018-09-29T14:29:34.822418+02:00 debian kernel: [ 9655.237824] Disabling > non-boot CPUs ... > 2018-09-29T14:29:34.825206+02:00 debian kernel: [ 9655.251432] > irq_migrate_all_off_this_cpu: 8 callbacks suppressed > 2018-09-29T14:29:34.825215+02:00 debian kernel: [ 9655.251434] IRQ 19: no > longer affine to CPU1 > 2018-09-29T14:29:34.825217+02:00 debian kernel: [ 9655.251447] IRQ 36: no > longer affine to CPU1 > 2018-09-29T14:29:34.825218+02:00 debian kernel: [ 9655.251455] IRQ 37: no > longer affine to CPU1 > 2018-09-29T14:29:34.825219+02:00 debian kernel: [ 9655.251463] IRQ 41: no > longer affine to CPU1 > 2018-09-29T14:29:34.825221+02:00 debian kernel: [ 9655.251473] IRQ 43: no > longer affine to CPU1 > 2018-09-29T14:29:34.825222+02:00 debian kernel: [ 9655.251480] IRQ 44: no > longer affine to CPU1 > 2018-09-29T14:29:34.825222+02:00 debian kernel: [ 9655.252590] smpboot: CPU 1 > is now offline > 2018-09-29T14:29:34.825223+02:00 debian kernel: [ 9655.271289] IRQ 42: no > longer affine to CPU2 > 2018-09-29T14:29:34.825224+02:00 debian kernel: [ 9655.272325] smpboot: CPU 2 > is now offline > 2018-09-29T14:29:34.825225+02:00 debian kernel: [ 9655.299226] IRQ 1: no > longer affine to CPU3 > 2018-09-29T14:29:34.825226+02:00 debian kernel: [ 9655.299235] IRQ 8: no > longer affine to CPU3 > 2018-09-29T14:29:34.825227+02:00 debian kernel: [ 9655.299239] IRQ 9: no > longer affine to CPU3 > 2018-09-29T14:29:34.825228+02:00 debian kernel: [ 9655.300305] smpboot: CPU 3 > is now offline > 2018-09-29T14:29:34.825229+02:00 debian kernel: [ 9655.301248] ACPI: > Low-level resume complete > 2018-09-29T14:29:34.825230+02:00 debian kernel: [ 9655.301283] PM: Restoring > platform NVS memory > 2018-09-29T14:29:34.825231+02:00 debian kernel: [ 9655.301367] LVT offset 0 > assigned for vector 0x400 > 2018-09-29T14:29:34.825231+02:00 debian kernel: [ 9655.301586] Enabling > non-boot CPUs ... > 2018-09-29T14:29:34.825232+02:00 debian kernel: [ 9655.301626] x86: Booting > SMP configuration: > 2018-09-29T14:29:34.825233+02:00 debian kernel: [ 9655.301627] smpboot: > Booting Node 0 Processor 1 APIC 0x11 > 2018-09-29T14:29:34.825234+02:00 debian kernel: [ 9655.303951] cache: parent > cpu1 should not be sleeping > 2018-09-29T14:29:34.825235+02:00 debian kernel: [ 9655.304023] microcode: > CPU1: patch_level=0x06006118 > 2018-09-29T14:29:34.825236+02:00 debian kernel: [ 9655.304150] CPU1 is up > 2018-09-29T14:29:34.825237+02:00 debian kernel: [ 9655.304174] smpboot: > Booting Node 0 Processor 2 APIC 0x12 > 2018-09-29T14:29:34.825238+02:00 debian kernel: [ 9655.306626] cache: parent > cpu2 should not be sleeping > 2018-09-29T14:29:34.825239+02:00 debian kernel: [ 9655.306703] microcode: > CPU2: patch_level=0x06006118 > 2018-09-29T14:29:34.825239+02:00 debian kernel: [ 9655.306860] CPU2 is up > 2018-09-29T14:29:34.825240+02:00 debian kernel: [ 9655.306876] smpboot: > Booting Node 0 Processor 3 APIC 0x13 > 2018-09-29T14:29:34.825241+02:00 debian kernel: [ 9655.309186] cache: parent > cpu3 should not be sleeping > 2018-09-29T14:29:34.825242+02:00 debian kernel: [ 9655.309256] microcode: > CPU3: patch_level=0x06006118 > 2018-09-29T14:29:34.825242+02:00 debian kernel: [ 9655.309417] CPU3 is up > 2018-09-29T14:29:34.825243+02:00 debian kernel: [ 9655.309928] ACPI: Waking > up from system sleep state S3 > 2018-09-29T14:29:34.825244+02:00 debian kernel: [ 9655.417012] [drm] PCIE > GART of 1024M enabled (table at 0x000000F400000000). > 2018-09-29T14:29:34.825245+02:00 debian kernel: [ 9655.417032] usb usb3: root > hub lost power or was reset > 2018-09-29T14:29:34.825246+02:00 debian kernel: [ 9655.417035] usb usb4: root > hub lost power or was reset > 2018-09-29T14:29:34.825292+02:00 debian kernel: [ 9655.417713] sd 1:0:0:0: > [sda] Starting disk > 2018-09-29T14:29:34.825294+02:00 debian kernel: [ 9655.417738] sd 2:0:0:0: > [sdb] Starting disk > 2018-09-29T14:29:34.825295+02:00 debian kernel: [ 9655.445945] [drm] SADs > count is: -2, don't need to read it > 2018-09-29T14:29:34.825296+02:00 debian kernel: [ 9655.574294] r8169 > 0000:05:00.0 enp5s0: link down > 2018-09-29T14:29:34.825297+02:00 debian kernel: [ 9655.619374] [drm] UVD > initialized successfully. > 2018-09-29T14:29:34.825298+02:00 debian kernel: [ 9655.729921] ata6: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:29:34.825299+02:00 debian kernel: [ 9655.732127] ata1: SATA > link down (SStatus 0 SControl 300) > 2018-09-29T14:29:34.825300+02:00 debian kernel: [ 9655.818679] [drm] VCE > initialized successfully. > 2018-09-29T14:29:34.825300+02:00 debian kernel: [ 9655.891361] ata7: SATA > link up 1.5 Gbps (SStatus 113 SControl 300) > 2018-09-29T14:29:34.825301+02:00 debian kernel: [ 9655.908676] ata7.00: > configured for UDMA/100 > 2018-09-29T14:29:34.825302+02:00 debian kernel: [ 9655.967503] usb 3-6: reset > low-speed USB device number 3 using xhci_hcd > 2018-09-29T14:29:34.825303+02:00 debian kernel: [ 9656.463597] usb 3-5: reset > high-speed USB device number 2 using xhci_hcd > 2018-09-29T14:29:34.825304+02:00 debian kernel: [ 9656.642604] OOM killer > enabled. > 2018-09-29T14:29:34.834525+02:00 debian kernel: [ 9656.642605] Restarting > tasks ... done. > 2018-09-29T14:29:34.834543+02:00 debian kernel: [ 9656.651338] PM: suspend > exit > 2018-09-29T14:29:35.466759+02:00 debian kernel: [ 9657.283200] ata2: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:29:35.490546+02:00 debian kernel: [ 9657.310245] ata2.00: > configured for UDMA/133 > 2018-09-29T14:29:36.374520+02:00 debian kernel: [ 9658.191345] ata3: SATA > link up 6.0 Gbps (SStatus 133 SControl 300) > 2018-09-29T14:29:36.450552+02:00 debian kernel: [ 9658.267691] ata3.00: > configured for UDMA/133 > 2018-09-29T14:29:36.530537+02:00 debian kernel: [ 9658.347482] Process > accounting resumed > 2018-09-29T14:29:36.650527+02:00 debian kernel: [ 9658.467765] r8169 > 0000:05:00.0 enp5s0: link up > 2018-09-29T14:44:12.850615+02:00 debian kernel: [10534.669978] amdgpu: > [powerplay] pp_dpm_get_fan_speed_percent was not implemented. > 2018-09-29T14:44:16.826624+02:00 debian kernel: [10538.646466] amdgpu: > [powerplay] pp_dpm_get_fan_control_mode was not implemented. > 2018-09-29T15:19:11.122518+02:00 debian kernel: [12632.939518] [drm] SADs > count is: -2, don't need to read it > 2018-09-29T15:39:20.106519+02:00 debian kernel: [13841.927363] [drm] SADs > count is: -2, don't need to read it > 2018-09-29T17:12:29.058514+02:00 debian kernel: [19430.878035] [drm] SADs > count is: -2, don't need to read it
