Package: linux-image-amd64 Version: 4.19+102 Severity: important Hi,
The UAS device drivers are not working under VMWare. I have to use a work around and blacklist the UAS driver to get device working. This is the output of dmesg before blacklisting and after: [18853.525588] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [18853.555794] usb 4-1: New USB device found, idVendor=152d, idProduct=3562, bcdDevice=63.02 [18853.555797] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18853.555799] usb 4-1: Product: AD TO BE II [18853.555800] usb 4-1: Manufacturer: ADMKIV [18853.555802] usb 4-1: SerialNumber: DB1234567897B0 [18853.618227] usbcore: registered new interface driver usb-storage [18853.630722] scsi host3: uas [18853.631660] usbcore: registered new interface driver uas [18853.634778] usb 4-1: stat urb: status -32 [18853.634836] scsi 3:0:0:0: tag#4 data cmplt err -32 uas-tag 1 inflight: CMD [18853.634839] scsi 3:0:0:0: tag#4 CDB: Inquiry 12 00 00 00 24 00 [18874.274509] scsi 3:0:0:0: tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [18874.274517] scsi 3:0:0:0: tag#4 CDB: Inquiry 12 00 00 00 24 00 [18874.299065] scsi host3: uas_eh_device_reset_handler start [18874.436689] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [18874.471991] scsi host3: uas_eh_device_reset_handler success [18874.474250] usb 4-1: stat urb: status -32 [18874.475158] scsi 3:0:0:0: tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [18874.475182] scsi 3:0:0:0: tag#4 CDB: Test Unit Ready 00 00 00 00 00 00 [18874.475190] scsi host3: uas_eh_device_reset_handler start [18874.718701] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [18874.747546] scsi host3: uas_eh_device_reset_handler success [18874.747552] scsi 3:0:0:0: Device offlined - not ready after error recovery [18899.867372] usbcore: deregistering interface driver uas [18910.834000] usbcore: deregistering interface driver usb-storage [18914.787331] usb 4-1: UAS is blacklisted for this device, using usb-storage instead [18914.787333] usb-storage 4-1:1.0: USB Mass Storage device detected [18914.788277] usb-storage 4-1:1.0: Quirks match for vid 152d pid 3562: 800000 [18914.788371] scsi host3: usb-storage 4-1:1.0 [18914.788721] usbcore: registered new interface driver usb-storage [18915.795385] scsi 3:0:0:0: Direct-Access ADplus SuperVer 6302 PQ: 0 ANSI: 6 [18915.796367] scsi 3:0:0:0: Attached scsi generic sg1 type 0 [18915.816273] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [18915.817608] sd 3:0:0:0: [sda] Write Protect is off [18915.817612] sd 3:0:0:0: [sda] Mode Sense: 33 00 00 08 [18915.820683] sd 3:0:0:0: [sda] No Caching mode page found [18915.820690] sd 3:0:0:0: [sda] Assuming drive cache: write through [18915.827904] sda: sda1 sda2 sda3 [18915.834691] sd 3:0:0:0: [sda] Attached SCSI disk -- System Information: Debian Release: buster APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-2-amd64 (SMP w/4 CPU cores) Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=ro_RO.UTF-8, LC_CTYPE=ro_RO.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:ro (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-amd64 depends on: ii linux-image-4.19.0-2-amd64 4.19.16-1 linux-image-amd64 recommends no packages. linux-image-amd64 suggests no packages. -- no debconf information
