On Mon, Sep 9, 2019 at 17:51:02 +0100, Ben Hutchings wrote: > On Mon, 9 Sep 2019 16:29:07 +0000 Peter Palfrader <wea...@debian.org> > wrote: > > Package: src:linux > > Version: 4.19.67-2 > > Severity: important > > > > The buster kernel, as well as the backports kernel > > (linux-image-5.2.0-0.bpo.2-amd64 5.2.9-2~bpo10+1) fail to boot > > sibelius.debian.org, which has some storage attached to it via, > > presumably, FC. > > > > The kernel keeps printing > > > > | qla2xxx [...]-...: Async-gpdb failed - hdl=.. ... > [...] > > So this controller is: > > 06:01.0 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre Channel to > PCI-X HBA [1077:2312] (rev 02) > Subsystem: QLogic Corp. ISP2312-based 2Gb Fibre Channel to PCI-X HBA > [1077:010a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 128 (16000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 26 > NUMA node: 0 > Region 0: I/O ports at c800 [size=256] > Region 1: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K] > Expansion ROM at fe8c0000 [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: qla2xxx > Kernel modules: qla2xxx > These look similar, though they don't point at a resolution: https://bugzilla.kernel.org/show_bug.cgi?id=199887 https://bugzilla.opensuse.org/show_bug.cgi?id=1121319
Seemingly introduced in 4.11. Cheers, Julien
