Package: src:linux Version: 5.2.9-2~bpo10+1 Severity: normal With the backports kernel, a Raspberry Pi 3B+ cannot be shut down or rebooted; the buster kernel manages that (but does not have sound).
I’ve captured the last couple of lines on the screen: the first two are from sysvinit, three kernel ones follow: Will now restart. I: executing reboot "-d" "-f" "-i" regardless of check results. [ 1168.343056] kvm: exiting hardware virtualization [ 1168.352199] reboot: Restarting system [ 1168.358391] Reboot failed -- System halted Note I have the following firmware package installed: ii raspi3-firmware 1.20190215-1+deb10u1 arm64 Raspberry Pi 2 and 3 GPU firmware and bootloaders I know unstable carries a later one, but that’s not in backports. Not sure whether that would make a difference. Currently, the kernel is the only backports package I have installed. -- Package-specific info: ** Version: Linux version 5.2.0-0.bpo.2-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.2.9-2~bpo10+1 (2019-08-25) ** Command line: bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa020d3 bcm2709.serial=0xa5e576b6 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:E5:76:B6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=128M rootwait ** Tainted: C (1024) * Module from drivers/staging has been loaded. ** Kernel log: [ 5.053654] dwc2 3f980000.usb: irq 41, io mem 0x3f980000 [ 5.059640] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 5.065497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.071349] usb usb1: Product: DWC OTG Controller [ 5.077130] usb usb1: Manufacturer: Linux 5.2.0-0.bpo.2-arm64 dwc2_hsotg [ 5.082902] usb usb1: SerialNumber: 3f980000.usb [ 5.089579] hub 1-0:1.0: USB hub found [ 5.095483] hub 1-0:1.0: 1 port detected [ 5.495140] usb 1-1: new high-speed USB device number 2 using dwc2 [ 5.713780] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 5.719700] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.727468] hub 1-1:1.0: USB hub found [ 5.733423] hub 1-1:1.0: 4 ports detected [ 5.746030] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.027120] usb 1-1.1: new high-speed USB device number 3 using dwc2 [ 6.049550] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 6.131504] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 6.137581] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.144425] hub 1-1.1:1.0: USB hub found [ 6.150479] hub 1-1.1:1.0: 3 ports detected [ 6.443150] usb 1-1.1.2: new low-speed USB device number 4 using dwc2 [ 6.561074] usb 1-1.1.2: New USB device found, idVendor=1241, idProduct=1177, bcdDevice= 2.70 [ 6.567077] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.655174] usb 1-1.1.3: new low-speed USB device number 5 using dwc2 [ 6.764926] usb 1-1.1.3: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01 [ 6.771086] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.777081] usb 1-1.1.3: Product: Dell QuietKey Keyboard [ 6.782996] usb 1-1.1.3: Manufacturer: DELL [ 7.011214] usb 1-1.1.1: new high-speed USB device number 6 using dwc2 [ 7.119877] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 7.125885] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.262851] random: crng init done [ 7.381018] systemd-udevd[357]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 8.250758] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.273456] vchiq: vchiq_init_state: slot_zero = 00000000fa164383 [ 8.316841] bcm2835-rng 3f104000.rng: hwrng registered [ 8.380910] systemd-udevd[374]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 8.589125] hidraw: raw HID events driver (C) Jiri Kosina [ 8.614860] libphy: Fixed MDIO Bus: probed [ 8.700164] usbcore: registered new interface driver usbhid [ 8.707013] usbhid: USB HID core driver [ 8.919856] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 8.928383] libphy: lan78xx-mdiobus: probed [ 9.113656] media: Linux media interface: v0.10 [ 9.174565] usbcore: registered new interface driver lan78xx [ 9.237491] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.245368] usbcore: registered new interface driver brcmfmac [ 9.301761] videodev: Linux video capture interface: v2.00 [ 9.318332] input: HID 1241:1177 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:1241:1177.0001/input/input0 [ 9.325927] hid-generic 0003:1241:1177.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-3f980000.usb-1.1.2/input0 [ 9.334804] input: DELL Dell QuietKey Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:413C:2106.0002/input/input1 [ 9.337791] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 9.349811] brcmfmac mmc1:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt (-2) [ 9.349819] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 9.349828] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2 [ 9.369971] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.txt [ 9.400133] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-3f980000.usb-1.1.3/input0 [ 9.438461] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 9.476421] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.486499] systemd-udevd[367]: Using default interface naming scheme 'v240'. [ 9.542286] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.550435] brcmfmac mmc1:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2) [ 9.558657] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 9.565758] systemd-udevd[367]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 9.567640] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 9.583682] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 9.721673] systemd-udevd[376]: Using default interface naming scheme 'v240'. [ 9.732089] systemd-udevd[376]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 9.789115] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory: -17 [ 9.803707] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.805326] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.821496] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.836488] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.845618] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.854725] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.863749] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.872942] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.882235] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.891432] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.940620] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.949054] checking generic (3e97a000 280000) vs hw (0 ffffffffffffffff) [ 9.949062] fb0: switching to vc4drmfb from simple [ 9.957599] Console: switching to colour dummy device 80x25 [ 9.958307] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.958333] [drm] Driver supports precise vblank timestamp query. [ 9.960723] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.993109] Console: switching to colour frame buffer device 160x64 [ 10.025051] vc4-drm soc:gpu: fb0: vc4drmfb frame buffer device [ 10.156043] Bluetooth: Core ver 2.22 [ 10.156293] NET: Registered protocol family 31 [ 10.156392] Bluetooth: HCI device and connection manager initialized [ 10.156547] Bluetooth: HCI socket layer initialized [ 10.156658] Bluetooth: L2CAP socket layer initialized [ 10.156787] Bluetooth: SCO socket layer initialized [ 16.611756] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard [ 19.144325] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 39.878622] elogind-daemon[1714]: New seat seat0. [ 39.883181] elogind-daemon[1714]: Watching system buttons on /dev/input/event1 (DELL Dell QuietKey Keyboard) [ 42.446245] elogind-daemon[1714]: New session 1 of user test. [ 44.967783] elogind-daemon[1714]: New session 2 of user test. ** Model information Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3 ** Loaded modules: nls_ascii nls_cp437 vfat fat btsdio bluetooth bcm2835_v4l2(C) vc4 evdev drbg v4l2_common videobuf2_vmalloc ansi_cprng snd_soc_core snd_bcm2835(C) videobuf2_memops videobuf2_v4l2 snd_pcm_dmaengine ecdh_generic ecc snd_pcm videobuf2_common hid_generic snd_timer videodev brcmfmac snd media brcmutil microchip cfg80211 soundcore cec lan78xx drm_kms_helper rfkill usbhid of_mdio fixed_phy drm hid libphy bcm2835_rng bcm2835_thermal rng_core pwm_bcm2835 vchiq(C) leds_gpio ext4 crc16 mbcache jbd2 crc32c_generic dwc2 udc_core usbcore sdhci_iproc sdhci_pltfm sdhci usb_common bcm2835 i2c_bcm2835 phy_generic ** Network interface configuration: *** /etc/network/interfaces: # interfaces(5) file used by ifup(8) and ifdown(8) # Include files from /etc/network/interfaces.d: source-directory /etc/network/interfaces.d # The loopback network interface auto lo iface lo inet loopback # First Ethernet interface auto eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether b8:27:eb:e5:76:b6 brd ff:ff:ff:ff:ff:ff inet 172.26.12.73/16 brd 172.26.255.255 scope global dynamic eth0 valid_lft 43058sec preferred_lft 43058sec inet6 fe80::ba27:ebff:fee5:76b6/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether e6:e4:5c:3a:66:07 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 434271 2362 0 4 0 0 0 0 71875 618 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 1128 total packets received 24 with invalid addresses 0 forwarded 0 incoming packets discarded 1094 incoming packets delivered 581 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 5 active connection openings 1 passive connection openings 0 failed connection attempts 0 connection resets received 1 connections established 748 segments received 532 segments sent out 0 segments retransmitted 0 bad segments received 7 resets sent Udp: 49 packets received 0 packets to unknown port received 0 packet receive errors 49 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 296 UdpLite: TcpExt: 2 TCP sockets finished time wait in fast timer 328 packet headers predicted 9 acknowledgments not containing data payload received 340 predicted acknowledgments 3 connections reset due to unexpected data TCPRcvCoalesce: 6 TCPOrigDataSent: 355 TCPDelivered: 360 IpExt: InMcastPkts: 1 InBcastPkts: 296 InOctets: 344295 OutOctets: 61384 InMcastOctets: 32 InBcastOctets: 61468 InNoECTPkts: 1128 ** PCI devices: not available ** USB devices: not available -- System Information: Debian Release: 10.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: arm64 (aarch64) Kernel: Linux 5.2.0-0.bpo.2-arm64 (SMP w/4 CPU cores) Kernel taint flags: TAINT_CRAP Locale: LANG=C.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-5.2.0-0.bpo.2-arm64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-5.2.0-0.bpo.2-arm64 recommends: pn apparmor <none> ii firmware-linux-free 3.4 Versions of packages linux-image-5.2.0-0.bpo.2-arm64 suggests: pn debian-kernel-handbook <none> pn linux-doc-5.2 <none> Versions of packages linux-image-5.2.0-0.bpo.2-arm64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20190114-2 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information