Package: src:linux
Version: 5.4.8-1
Severity: grave
Justification: causes non-serious data loss
I have noted in the last days that sometime the desktop freeze from some
fraction of second to some seconds and then the desktop is usable again
without problems.
I have had a longer freeze, then I get a black screen with all blocked.
I have used the Magic Key Ctrl-AltGr-REISU, but I can only have the
keyboard leds working, Ctrl-Alt-Fx working, but I cannot reach a console
or the Desktop GUI, so I have done a Ctrl-AltGr-B to reboot.
After reboot, I see the following errors in the log:
Jan 15 11:37:33 prinad03 kernel: [ 9354.966794] i915 0000:00:02.0: GPU
HANG: ecode 9:1:0x00000000, hang on rcs0
Jan 15 11:37:33 prinad03 kernel: [ 9354.966797] GPU hangs can indicate a
bug anywhere in the entire gfx stack, including users
pace.
Jan 15 11:37:33 prinad03 kernel: [ 9354.966798] Please file a _new_ bug
report on bugs.freedesktop.org against DRI -> DRM/Inte
l
Jan 15 11:37:33 prinad03 kernel: [ 9354.966799] drm/i915 developers can
then reassign to the right component if it's not a ker
nel issue.
Jan 15 11:37:33 prinad03 kernel: [ 9354.966800] The GPU crash dump is
required to analyze GPU hangs, so please always attach i
t.
Jan 15 11:37:33 prinad03 kernel: [ 9354.966801] GPU crash dump saved to
/sys/class/drm/card0/error
Jan 15 11:37:33 prinad03 kernel: [ 9354.967810] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:37:33 prinad03 kernel: [ 9354.968580] [drm:gen8_reset_engines
[i915]] *ERROR* rcs0 reset request timed out: {request
: 00000001, RESET_CTL: 00000001}
Jan 15 11:37:33 prinad03 kernel: [ 9354.968680] i915 0000:00:02.0:
Resetting chip for hang on rcs0
Jan 15 11:37:33 prinad03 kernel: [ 9354.970473] [drm:gen8_reset_engines
[i915]] *ERROR* rcs0 reset request timed out: {request
: 00000001, RESET_CTL: 00000001}
Jan 15 11:37:33 prinad03 kernel: [ 9354.971264] [drm:gen8_reset_engines
[i915]] *ERROR* rcs0 reset request timed out: {request: 00000001,
RESET_CTL: 00000001}
Jan 15 11:37:36 prinad03 kernel: [ 9358.166773] Asynchronous wait on
fence i915:gnome-shell[1935]:184e0 timed out
(hint:intel_atomic_commit_ready+0x0/0x50 [i915])
Jan 15 11:37:43 prinad03 kernel: [ 9364.950744] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:37:51 prinad03 kernel: [ 9372.950740] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:37:53 prinad03 kernel: [ 9374.966742] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:37:55 prinad03 kernel: [ 9376.950742] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:37:57 prinad03 kernel: [ 9378.966745] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:37:59 prinad03 kernel: [ 9380.950742] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:01 prinad03 kernel: [ 9382.966734] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:03 prinad03 kernel: [ 9384.950697] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:05 prinad03 kernel: [ 9386.966738] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:07 prinad03 kernel: [ 9388.950738] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:09 prinad03 kernel: [ 9390.966738] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:11 prinad03 kernel: [ 9392.950737] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:13 prinad03 kernel: [ 9394.966734] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:15 prinad03 kernel: [ 9396.950732] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:17 prinad03 kernel: [ 9398.966735] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:19 prinad03 kernel: [ 9400.950740] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:21 prinad03 kernel: [ 9402.966724] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:23 prinad03 kernel: [ 9404.950754] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:25 prinad03 kernel: [ 9406.966730] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:27 prinad03 kernel: [ 9408.950736] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
Jan 15 11:38:29 prinad03 kernel: [ 9410.966733] i915 0000:00:02.0:
Resetting rcs0 for hang on rcs0
$ cat /sys/class/drm/card0/error
No error state collected
Probably this is due because I have reboot the PC.
I have searched back to see if there are error for the previously
momentaney freezes and I found the following line more than once.
kernel: [29704.922284] i915 0000:00:02.0: Resetting rcs0 for stuck wait
on rcs0
I think that I get all the freezes when I'm using firefox.
I can reproduce the "dead" freeze when I use an internal web application
for about 0,5h - 1h. The freeze seem to be random and not on a specific
operation (I can do the last operation that generate the freeze after a
reboot).
I have noted that the line before or near before is always the following
(but I don't think this is related):
wpa_supplicant[639]: wlp1s0: Reject scan trigger since one is already
pending
I have see that this error "Resetting rcs0 for stuck wait on rcs0" start
from the day 14/01/2020 and the day before: 13/01/2020 I have installed
the following packages (without reboot)
Install: linux-source-5.4:amd64 (5.4.8-1, automatic),
linux-image-5.4.0-2-amd64:amd64 (5.4.8-1, automatic),
linux-config-5.4:amd64 (5.4.8-1, automatic)
After the reboot I see the following rows with i915:
Jan 15 11:42:43 prinad03 kernel: [ 18.848491] i915 0000:00:02.0:
vgaarb: deactivate vga console
Jan 15 11:42:43 prinad03 kernel: [ 18.851182] i915 0000:00:02.0:
vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Jan 15 11:42:43 prinad03 kernel: [ 19.133848] i915 0000:00:02.0:
firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
Jan 15 11:42:43 prinad03 kernel: [ 19.134105] [drm] Finished loading
DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
Jan 15 11:42:43 prinad03 kernel: [ 19.186345] [drm] Initialized i915
1.6.0 20190822 for 0000:00:02.0 on minor 0
Jan 15 11:42:43 prinad03 kernel: [ 19.513450] fbcon: i915drmfb (fb0)
is primary device
Jan 15 11:42:43 prinad03 kernel: [ 19.537737] i915 0000:00:02.0: fb0:
i915drmfb frame buffer device
Jan 15 11:42:43 prinad03 kernel: [ 19.879434] snd_hda_intel
0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
I cannot reproduce the freezes if I don't use firefox.
If I boot with the previus Linux image: linux-image-5.3.0-3-amd64, I
have no freeze and I can work all the day without problems.
Let me know if I can do some test (I don't have always access to the
machine, so I can need some time to make more tests)
Ciao
Davide
-- Package-specific info:
** Version:
Linux version 5.4.0-2-amd64 (debian-kernel@lists.debian.org) (gcc
version 9.2.1 20200104 (Debian 9.2.1-22)) #1 SMP Debian 5.4.8-1 (2020-01-05)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.4.0-2-amd64
root=UUID=50755324-6181-49f7-aab4-81b95a7e9888 ro quiet
** Not tainted
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: LENOVO
product_name: 10MUS46V00
product_version: ThinkCentre M910q
chassis_vendor: LENOVO
chassis_version: None
bios_vendor: LENOVO
bios_version: M1AKT2CA
board_vendor: LENOVO
board_name: 310B
board_version: SDK0J40697 WIN 3305084658389
** Loaded modules:
rfcomm
bnep
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
snd_hda_codec_hdmi
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
iwlmvm
snd_hda_codec_realtek
snd_hda_codec_generic
ledtrig_audio
mac80211
libarc4
btusb
btrtl
kvm
iwlwifi
irqbypass
i915
snd_hda_intel
btbcm
btintel
snd_intel_nhlt
snd_hda_codec
bluetooth
snd_hda_core
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
snd_hwdep
aesni_intel
crypto_simd
drbg
cryptd
glue_helper
ansi_cprng
snd_pcm
mei_wdt
ecdh_generic
ecc
drm_kms_helper
intel_cstate
intel_uncore
intel_rapl_perf
iTCO_wdt
snd_timer
iTCO_vendor_support
sr_mod
cfg80211
efi_pstore
drm
snd
cdrom
joydev
evdev
i2c_algo_bit
pcspkr
efivars
sg
soundcore
watchdog
rfkill
wmi_bmof
intel_wmi_thunderbolt
mei_me
mei
tpm_crb
button
acpi_pad
tpm_tis
tpm_tis_core
tpm
rng_core
nct6683
coretemp
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
uas
usb_storage
sd_mod
ahci
libahci
xhci_pci
libata
xhci_hcd
crc32c_intel
e1000e
scsi_mod
usbcore
ptp
i2c_i801
pps_core
usb_common
wmi
video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen
Core Processor Host Bridge/DRAM Registers [8086:590f] (rev 06)
Subsystem: Lenovo Xeon E3-1200 v6/7th Gen Core Processor Host
Bridge/DRAM Registers [17aa:310b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics
630 [8086:5912] (rev 04) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Lenovo HD Graphics 630 [17aa:310b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 125
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 200 Series/Z370 Chipset
Family USB 3.0 xHCI Controller [8086:a2af] (prog-if 30 [XHCI])
Subsystem: Lenovo 200 Series/Z370 Chipset Family USB 3.0 xHCI
Controller [17aa:310b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 0: Memory at f7130000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation 200
Series PCH Thermal Subsystem [8086:a2b1]
Subsystem: Lenovo 200 Series PCH Thermal Subsystem [17aa:310b]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at f714f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:16.0 Communication controller [0780]: Intel Corporation 200 Series
PCH CSME HECI #1 [8086:a2ba]
Subsystem: Lenovo 200 Series PCH CSME HECI [17aa:310b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
Region 0: Memory at f714e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation Device [8086:a2bd]
(prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:310b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at f0a0 [size=8]
Region 1: Memory at f714d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:17.0 SATA controller [0106]: Intel Corporation 200 Series PCH SATA
controller [AHCI mode] [8086:a282] (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo 200 Series PCH SATA controller [AHCI mode] [17aa:310b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at f7148000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at f714c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f714b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express
Root Port #6 [8086:a295] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 120
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: None
Memory behind bridge: f7000000-f70fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation 200 Series PCH LPC
Controller (Q270) [8086:a2c6]
Subsystem: Lenovo 200 Series PCH LPC Controller (Q270) [17aa:310b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation 200 Series/Z370
Chipset Family Power Management Controller [8086:a2a1]
Subsystem: Lenovo 200 Series/Z370 Chipset Family Power Management
Controller [17aa:310b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f7144000 (32-bit, non-prefetchable) [disabled]
[size=16K]
00:1f.3 Audio device [0403]: Intel Corporation 200 Series PCH HD Audio
[8086:a2f0]
Subsystem: Lenovo 200 Series PCH HD Audio [17aa:310b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at f7140000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at f7120000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 200 Series/Z370 Chipset Family
SMBus Controller [8086:a2a3]
Subsystem: Lenovo 200 Series/Z370 Chipset Family SMBus Controller
[17aa:310b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f714a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet
Connection (2) I219-LM [8086:15b7]
Subsystem: Lenovo Ethernet Connection (2) I219-LM [17aa:310b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 121
Region 0: Memory at f7100000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
01:00.0 Network controller [0280]: Intel Corporation Wireless 8265 /
8275 [8086:24fd] (rev 78)
Subsystem: Intel Corporation Dual Band Wireless-AC 8265 [8086:1010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 126
Region 0: Memory at f7000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 17ef:608d Lenovo Lenovo USB Optical Mouse
Bus 001 Device 004: ID 17ef:6099 Lenovo Lenovo Traditional USB Keyboard
Bus 001 Device 003: ID 152d:2339 JMicron Technology Corp. / JMicron USA
Technology Corp. JM20339 SATA Bridge
Bus 001 Device 002: ID 8087:0a2b Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing-debug
APT policy: (500, 'testing-debug'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8),
LANGUAGE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.4.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26+20191223-1
ii linux-base 4.6
Versions of packages linux-image-5.4.0-2-amd64 recommends:
ii apparmor 2.13.3-7
ii firmware-linux-free 3.4
Versions of packages linux-image-5.4.0-2-amd64 suggests:
ii debian-kernel-handbook 1.0.19
ii grub-efi-amd64 2.04-5
pn linux-doc-5.4 <none>
Versions of packages linux-image-5.4.0-2-amd64 is related to:
ii firmware-amd-graphics 20190717-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20190717-2
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
