Your message dated Fri, 23 Apr 2021 16:25:21 +0200
with message-id <[email protected]>
and subject line Re: Bug#687308: linux-image-3.2.0-2-686-pae: When insert usb 
yota lte modem or usb mouse both devices failed to work.
has caused the Debian Bug report #687308,
regarding linux-image-3.2.0-2-686-pae: When insert usb yota lte modem or usb 
mouse both devices failed to work.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
687308: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=687308
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.20-1
Severity: important

Dear Maintainer,

Sometimes when I insert device, both of them fail to work.

The only solution is to reboot laptop, which is bad.

Last line in dmesg are:


Sep 11 21:34:08 localhost kernel: [18653.975474] usb 2-1.2: new low-speed USB
device number 8 using ehci_hcd
Sep 11 21:34:08 localhost kernel: [18654.072262] usb 2-1.2: New USB device
found, idVendor=045e, idProduct=00cb
Sep 11 21:34:08 localhost kernel: [18654.072268] usb 2-1.2: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
Sep 11 21:34:08 localhost kernel: [18654.072273] usb 2-1.2: Product: Microsoft
Basic Optical Mouse v2.0
Sep 11 21:34:08 localhost kernel: [18654.072276] usb 2-1.2: Manufacturer:
Microsoft
Sep 11 21:34:08 localhost kernel: [18654.076391] input: Microsoft  Microsoft
Basic Optical Mouse v2.0  as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input16
Sep 11 21:34:08 localhost kernel: [18654.076793] generic-usb
0003:045E:00CB.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft
Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1.2/input0
Sep 11 21:35:09 localhost kernel: [18714.942458] usb 2-1.3: USB disconnect,
device number 5
Sep 11 21:35:09 localhost kernel: [18714.942585] rndis_host 2-1.3:1.0: eth1:
unregister 'rndis_host' usb-0000:00:1d.0-1.3, RNDIS device
Sep 11 21:35:11 localhost kernel: [18717.048667] usb 2-1.3: new high-speed USB
device number 9 using ehci_hcd
Sep 11 21:35:11 localhost kernel: [18717.152258] ehci_hcd 0000:00:1d.0: fatal
error
Sep 11 21:35:11 localhost kernel: [18717.156193] ehci_hcd 0000:00:1d.0: HC
died; cleaning up
Sep 11 21:35:11 localhost kernel: [18717.159056] ehci_hcd 0000:00:1d.0: force
halt; handshake f8224824 00004000 00004000 -> -110
Sep 11 21:35:11 localhost kernel: [18717.159060] ehci_hcd 0000:00:1d.0: HC
died; cleaning up
Sep 11 21:35:11 localhost kernel: [18717.159156] usb 2-1.3: device descriptor
read/all, error -108
Sep 11 21:35:11 localhost kernel: [18717.159165] hub 2-1:1.0: cannot disable
port 3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159180] hub 2-1:1.0: cannot reset port
3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159187] hub 2-1:1.0: cannot disable
port 3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159198] hub 2-1:1.0: cannot reset port
3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159205] hub 2-1:1.0: cannot disable
port 3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159216] hub 2-1:1.0: cannot reset port
3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159222] hub 2-1:1.0: cannot disable
port 3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159228] hub 2-1:1.0: unable to
enumerate USB device on port 3
Sep 11 21:35:11 localhost kernel: [18717.159234] hub 2-1:1.0: cannot disable
port 3 (err = -19)
Sep 11 21:35:11 localhost kernel: [18717.159245] usb 2-1.2: USB disconnect,
device number 8
Sep 11 21:35:11 localhost kernel: [18717.288370] usb 2-1.6: USB disconnect,
device number 3
Sep 11 21:35:11 localhost kernel: [18717.340275] usb 2-1: USB disconnect,
device number 2



-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.20-1) 
([email protected]) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP 
Mon Jun 11 18:27:04 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae 
root=UUID=2df64c86-d83f-4dba-800d-699a1b3bb259 ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    9.536006] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from 
PROM
[    9.536016] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    9.536018] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from 
PCIROM
[    9.545817] nouveau 0000:01:00.0: Invalid ROM contents
[    9.545909] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    9.545912] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from 
ACPI
[   10.074032] input: FSPPS/2 Sentelic FingerSensingPad as 
/devices/platform/i8042/serio1/input/input14
[   13.289958] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   13.289962] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   13.289965] [drm] nouveau 0000:01:00.0: Bios version 70.08.19.00
[   13.289969] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   13.289971] [drm] nouveau 0000:01:00.0: Found Display Configuration Block 
version 4.0
[   13.289974] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02014300 00000000
[   13.289976] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000
[   13.289979] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[   13.289981] [drm] nouveau 0000:01:00.0:   0: 0x00000340: type 0x40 idx 0 tag 
0xff
[   13.289983] [drm] nouveau 0000:01:00.0:   1: 0x00001061: type 0x61 idx 1 tag 
0x07
[   13.289985] [drm] nouveau 0000:01:00.0:   2: 0x00000147: type 0x47 idx 2 tag 
0xff
[   13.289987] [drm] nouveau 0000:01:00.0:   3: 0x00202346: type 0x46 idx 3 tag 
0x08
[   13.289989] [drm] nouveau 0000:01:00.0:   4: 0x00000400: type 0x00 idx 4 tag 
0xff
[   13.289991] [drm] nouveau 0000:01:00.0:   5: 0x00000210: type 0x10 idx 5 tag 
0xff
[   13.289993] [drm] nouveau 0000:01:00.0:   6: 0x00000211: type 0x11 idx 6 tag 
0xff
[   13.289995] [drm] nouveau 0000:01:00.0:   7: 0x00000213: type 0x13 idx 7 tag 
0xff
[   13.290009] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running 
VBIOS init tables.
[   13.290011] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 
0xD2F9
[   13.314046] [drm] nouveau 0000:01:00.0: 0xD2E4: i2c wr fail: -6
[   13.354221] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 
0xD93F
[   13.381034] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 
0xEAD4
[   13.381040] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 
0xEAD8
[   13.381098] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 
0xEBC0
[   13.381100] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 
0xEC25
[   13.419826] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   13.419829] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 
135MHz timing 0 voltage 830mV
[   13.419832] [drm] nouveau 0000:01:00.0: 1: core 202MHz shader 405MHz memory 
324MHz timing 1 voltage 830mV
[   13.419835] [drm] nouveau 0000:01:00.0: 3: core 560MHz shader 1120MHz memory 
800MHz timing 2 voltage 900mV
[   13.419925] [drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 
324MHz voltage 950mV
[   13.426280] [TTM] Zone  kernel: Available graphics memory: 430362 kiB.
[   13.426285] [TTM] Zone highmem: Available graphics memory: 1968542 kiB.
[   13.426289] [TTM] Initializing pool allocator.
[   13.426306] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[   13.426317] mtrr: no more MTRRs available
[   13.426337] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   13.437848] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, 
not registering our own
[   13.486008] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.486010] [drm] No driver support for vblank timestamp query.
[   13.535412] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x1a0000, bo 
f7144600
[   13.535523] fb1: nouveaufb frame buffer device
[   13.535527] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on 
minor 1
[   13.772836] usb 2-1.3: new high-speed USB device number 5 using ehci_hcd
[   13.865826] usb 2-1.3: New USB device found, idVendor=1076, idProduct=8001
[   13.865833] usb 2-1.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[   13.865837] usb 2-1.3: Product: Modem Yota
[   13.865841] usb 2-1.3: Manufacturer: GCT SEMICONDUCTOR Inc
[   13.910892] usbcore: registered new interface driver uas
[   13.922727] Initializing USB Mass Storage driver...
[   13.922815] scsi6 : usb-storage 2-1.3:1.0
[   13.922877] usbcore: registered new interface driver usb-storage
[   13.922879] USB Mass Storage support registered.
[   13.932297] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu 
turbo
[   14.127987] Adding 3949564k swap on /dev/sda7.  Priority:-1 extents:1 
across:3949564k 
[   14.147657] EXT4-fs (sda5): re-mounted. Opts: (null)
[   14.507404] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   14.690866] loop: module loaded
[   14.918574] scsi 6:0:0:0: CD-ROM            GDM Mass                       
PQ: 0 ANSI: 0 CCS
[   14.942975] sr1: scsi3-mmc drive: 0x/0x caddy
[   14.943184] sr 6:0:0:0: Attached scsi CD-ROM sr1
[   14.943935] sr 6:0:0:0: Attached scsi generic sg2 type 5
[   15.755680] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
(null)
[   15.870513] usb 2-1.3: USB disconnect, device number 5
[   16.833480] usb 2-1.3: new high-speed USB device number 6 using ehci_hcd
[   16.930608] usb 2-1.3: New USB device found, idVendor=1076, idProduct=8002
[   16.930614] usb 2-1.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[   16.930618] usb 2-1.3: Product: Modem Yota
[   16.930622] usb 2-1.3: Manufacturer: GCT SEMICONDUCTOR Inc
[   17.062252] usbcore: registered new interface driver cdc_ether
[   17.066533] rndis_host 2-1.3:1.0: dev can't take 1558 byte packets (max 
1458), adjusting MTU to 1400
[   17.068314] rndis_host 2-1.3:1.0: eth1: register 'rndis_host' at 
usb-0000:00:1d.0-1.3, RNDIS device, 00:09:3b:f0:1a:40
[   17.068328] usbcore: registered new interface driver rndis_host
[   19.043447] vboxdrv: Found 4 processor cores.
[   19.043559] vboxdrv: fAsync=0 offMin=0x127 offMax=0xdff
[   19.043606] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 
'normal'.
[   19.043607] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 
0x00190000).
[   19.784529] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input15
[   19.826118] vboxpci: IOMMU not found (not registered)
[   23.256655] Bluetooth: Core ver 2.16
[   23.256671] NET: Registered protocol family 31
[   23.256672] Bluetooth: HCI device and connection manager initialized
[   23.256674] Bluetooth: HCI socket layer initialized
[   23.256675] Bluetooth: L2CAP socket layer initialized
[   23.256679] Bluetooth: SCO socket layer initialized
[   23.276458] Bluetooth: RFCOMM TTY layer initialized
[   23.276470] Bluetooth: RFCOMM socket layer initialized
[   23.276473] Bluetooth: RFCOMM ver 1.11
[   23.348663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.348666] Bluetooth: BNEP filters: protocol multicast
[   24.257456] lp: driver loaded but no devices found
[   24.453201] ppdev: user-space parallel port driver
[   24.822871] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[   24.882667] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.863760] eth1: no IPv6 routers present

** Model information
not available

** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
uinput
binfmt_misc
rndis_host
cdc_ether
usbnet
mii
loop
usb_storage
uas
rtl8192se
uvcvideo
rtlwifi
videodev
mac80211
nouveau
cfg80211
media
rfkill
iTCO_wdt
iTCO_vendor_support
i915
snd_hda_codec_hdmi
ttm
drm_kms_helper
snd_hda_codec_realtek
psmouse
drm
pcspkr
evdev
serio_raw
i2c_algo_bit
i2c_i801
intel_ips
i2c_core
mxm_wmi
battery
video
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
wmi
snd_seq
snd_seq_device
snd_timer
snd
soundcore
ac
power_supply
processor
button
ext4
crc16
jbd2
mbcache
usbhid
hid
sg
sd_mod
sr_mod
cdrom
crc_t10dif
ahci
libahci
libata
ehci_hcd
usbcore
scsi_mod
usb_common
atl1c
thermal
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller 
[8086:0044] (rev 02)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 
Root Port [8086:0045] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: d0000000-d10fffff
        Prefetchable memory behind bridge: 00000000a0000000-00000000b1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor 
Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA 
controller])
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 5050 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series 
Chipset HECI Controller [8086:3b64] (rev 06)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d7806100 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d7805c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset 
High Definition Audio [8086:3b56] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at d7800000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d6800000-d77fffff
        Prefetchable memory behind bridge: 00000000d1800000-00000000d27fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d5800000-d67fffff
        Prefetchable memory behind bridge: 00000000d2800000-00000000d37fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: d4800000-d57fffff
        Prefetchable memory behind bridge: 00000000d3800000-00000000d47fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at d7805800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC 
Interface Controller [8086:3b09] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 
4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 41
        Region 0: I/O ports at 5048 [size=8]
        Region 1: I/O ports at 505c [size=4]
        Region 2: I/O ports at 5040 [size=8]
        Region 3: I/O ports at 5058 [size=4]
        Region 4: I/O ports at 5020 [size=32]
        Region 5: Memory at d7805000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus 
Controller [8086:3b30] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at d7806000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 5000 [size=32]

00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 
Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at d7804000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: intel ips

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 
425M] [10de:0df0] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at a0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at 4000 [size=128]
        Expansion ROM at d1000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller [10ec:8172] (rev 10)
        Subsystem: Quanta Microsystems, Inc Device [1a32:0308]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 3000 [size=256]
        Region 1: Memory at d6800000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit 
Ethernet [1969:1063] (rev c0)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at d5800000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: atl1c

ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath 
Architecture Generic Non-core Registers [8086:2c62] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath 
Architecture System Address Decoder [8086:2d01] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 
[8086:2d10] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 
[8086:2d11] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved 
[8086:2d12] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved 
[8086:2d13] (rev 05)
        Subsystem: QUANTA Computer Inc Device [152d:0853]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 002 Device 004: ID 064e:c206 Suyin Corp. 
Bus 002 Device 006: ID 1076:8002 GCT Semiconductor, Inc. 


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.46
ii  initramfs-tools [linux-initramfs-tool]  0.107
ii  kmod                                    9-1
ii  linux-base                              3.5
ii  module-init-tools                       9-1

Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii  firmware-linux-free  3.1
ii  libc6-i686           2.13-35

Versions of packages linux-image-3.2.0-2-686-pae suggests:
ii  extlinux       2:4.05+dfsg-6
ii  grub-pc        1.99-22.1
ii  linux-doc-3.2  3.2.23-1

Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
* linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: 
true
  linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: 
false
  linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
  linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:

--- End Message ---
--- Begin Message ---
Hi

Assuming the issue is not anymore reproducible on recent kernels I'm 
going to close this bugreport by now to clean up the list of src:linux
bugs from very old issues. In case you can reproduce the issue feel
free to reopen the bug.
 
Regards,
Salvatore

--- End Message ---

Reply via email to