Your message dated Sat, 24 Apr 2021 07:15:24 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #689989,
regarding linux-image-3.2.0-3-amd64: Machine shutdown after showing messages
"ACPI Exception: AE_TIME, Evaluating _BST (20110623/battery-455)"
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
689989: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=689989
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.23-1
Severity: normal
Hello,
When compiling a big .deb package, my machine started to heat quite a lot, and
after these messages throttling down [trying to?], it was shut down abruptly.
Kernel log retrieved from the previous boot.
Regards.
-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) ([email protected])
(gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
** Not tainted
** Kernel log:
[... Cut from before the shut down ...]
Oct 8 18:55:00 lugh kernel: [ 20.895863] eth0: no IPv6 routers present
Oct 8 20:15:52 lugh kernel: [ 4866.848215] CPU3: Core temperature above
threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848219] CPU1: Core temperature above
threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848223] CPU2: Package temperature above
threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848227] CPU0: Package temperature above
threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848230] CPU1: Package temperature above
threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.848233] CPU3: Package temperature above
threshold, cpu clock throttled (total events = 1)
Oct 8 20:15:52 lugh kernel: [ 4866.849183] CPU1: Core temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849186] CPU3: Core temperature/speed normal
Oct 8 20:15:52 lugh kernel: [ 4866.849189] CPU2: Package temperature/speed
normal
Oct 8 20:15:52 lugh kernel: [ 4866.849191] CPU0: Package temperature/speed
normal
Oct 8 20:15:52 lugh kernel: [ 4866.849193] CPU3: Package temperature/speed
normal
Oct 8 20:15:52 lugh kernel: [ 4866.849196] CPU1: Package temperature/speed
normal
Oct 8 20:19:36 lugh kernel: [ 5090.303889] ACPI Exception: AE_TIME, Returned
by Handler for [EmbeddedControl] (20110623/evregion-478)
Oct 8 20:19:36 lugh kernel: [ 5090.303901] ACPI Error: Method parse/execution
failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880129e7a268), AE_TIME
(20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303912] ACPI Error: Method parse/execution
failed [\ECRB] (Node ffff880129e7af60), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303918] ACPI Error: Method parse/execution
failed [\ECG5] (Node ffff880129e7ae48), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303924] ACPI Error: Method parse/execution
failed [\_SB_.AC__._PSR] (Node ffff880129e7b790), AE_TIME (20110623/psparse-536)
Oct 8 20:19:36 lugh kernel: [ 5090.303935] ACPI Exception: AE_TIME, Error
reading AC Adapter state (20110623/ac-118)
Oct 8 20:19:37 lugh kernel: [ 5090.803218] ACPI: EC: input buffer is not
empty, aborting transaction
Oct 8 20:19:37 lugh kernel: [ 5090.803225] ACPI Exception: AE_TIME, Returned
by Handler for [EmbeddedControl] (20110623/evregion-478)
Oct 8 20:19:37 lugh kernel: [ 5090.803238] ACPI Error: Method parse/execution
failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880129e7a268), AE_TIME
(20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803250] ACPI Error: Method parse/execution
failed [\ECBT] (Node ffff880129e7afb0), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803258] ACPI Error: Method parse/execution
failed [\ECG2] (Node ffff880129e7aec0), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803265] ACPI Error: Method parse/execution
failed [\ECG6] (Node ffff880129e7add0), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803272] ACPI Error: Method parse/execution
failed [\_SB_.BAT0._BST] (Node ffff880129e7b628), AE_TIME (20110623/psparse-536)
Oct 8 20:19:37 lugh kernel: [ 5090.803285] ACPI Exception: AE_TIME, Evaluating
_BST (20110623/battery-455)
Oct 8 20:20:14 lugh kernel: imklog 5.8.11, log source = /proc/kmsg started.
[...]
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E5520
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 03PH4G
board_version: A01
** Loaded modules:
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
uinput
fuse
snd_hda_codec_hdmi
snd_hda_codec_idt
joydev
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
coretemp
crc32c_intel
snd_seq
psmouse
dell_laptop
ghash_clmulni_intel
dell_wmi
arc4
sparse_keymap
aesni_intel
aes_x86_64
aes_generic
cryptd
dcdbas
evdev
serio_raw
iwlwifi
i915
snd_seq_device
battery
parport_pc
parport
snd_timer
i2c_i801
mac80211
drm_kms_helper
snd
video
drm
i2c_algo_bit
i2c_core
wmi
iTCO_wdt
acpi_cpufreq
cfg80211
iTCO_vendor_support
mperf
ac
power_supply
soundcore
rfkill
button
processor
ext4
crc16
jbd2
mbcache
microcode
sg
sd_mod
sr_mod
cdrom
crc_t10dif
ahci
libahci
firewire_ohci
libata
firewire_core
crc_itu_t
sdhci_pci
sdhci
mmc_core
thermal
thermal_sys
ehci_hcd
scsi_mod
tg3
libphy
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e1c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3d80000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e3d50000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e3d40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: e3c00000-e3cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: e3100000-e3afffff
Prefetchable memory behind bridge: 00000000e1100000-00000000e1afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: e3b00000-e3bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=11, sec-latency=0
I/O behind bridge: 00002000-00005fff
Memory behind bridge: e2000000-e30fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e3d30000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 42
Region 0: I/O ports at 70b0 [size=8]
Region 1: I/O ports at 70a0 [size=4]
Region 2: I/O ports at 7090 [size=8]
Region 3: I/O ports at 7080 [size=4]
Region 4: I/O ports at 7060 [size=32]
Region 5: Memory at e3d20000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell Device [1028:049a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e3d10000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 7040 [size=32]
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205
[8086:0082] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e3c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
09:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. 1394 OHCI Compliant Host
Controller [1217:13f7] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e3b30000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:00.1 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD controller
[1217:8321] (rev 05) (prog-if 01)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at e3b20000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:00.2 Mass storage controller [0180]: O2 Micro, Inc. O2 Flash Memory Card
[1217:8331] (rev 05)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e3b10000 (32-bit, non-prefetchable) [size=1K]
Region 2: Memory at e3b00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
0a:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761
Gigabit Ethernet PCIe [14e4:1681] (rev 10)
Subsystem: Dell Device [1028:049a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e2010000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at e2000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1bcf:280b Sunplus Innovation Technology Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.108
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-3-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
