Your message dated Sat, 24 Apr 2021 20:09:08 +0200 with message-id <[email protected]> and subject line Closing this bug has caused the Debian Bug report #703756, regarding kernel BUG at /build/buildd-linux_3.2.39-2-i386-4VFKqr/linux-3.2.39/fs/btrfs/inode.c:2933! when deleting snapshot to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 703756: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=703756 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 3.2.39-2 Severity: important snapshot delete (dealing with slow FS operation probably caused by metada full) triggered kernel BUG.. /dev/mapper/backup-data on /path type btrfs (rw,noatime,compress=zlib,nospace_cache) btrfs fi df /path Data: total=916.48GB, used=664.71GB System, DUP: total=8.00MB, used=104.00KB System: total=4.00MB, used=0.00 Metadata, DUP: total=2.00GB, used=1.96GB Metadata: total=8.00MB, used=0.00 btrfs filesystem show Label: none uuid: 252420bd-7e9b-4ee0-ba57-dd6c6b42280b Total devices 1 FS bytes used 666.68GB devid 1 size 920.51GB used 920.51GB path /dev/dm-0 Label: none uuid: 85adef0a-86a4-46ae-81a8-815c13345b9c Total devices 1 FS bytes used 377.25GB devid 1 size 465.76GB used 465.76GB path /dev/sdb1 Btrfs Btrfs v0.19 -- Package-specific info: ** Version: Linux version 3.2.0-4-686-pae ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=346248b3-9003-452d-8f99-4189e4dd2402 ro quiet ** Tainted: D (128) * Kernel has oopsed before. ** Kernel log: [ 6.152041] ata4: SATA link down (SStatus 0 SControl 0) [ 8.232033] ata5: SATA link down (SStatus 0 SControl 0) [ 10.432036] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 10.438457] ata6.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 10.438465] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 10.444909] ata6.00: configured for UDMA/100 [ 10.445261] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 10.501096] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 10.501248] sd 0:0:0:0: [sda] Write Protect is off [ 10.501257] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.501320] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.504798] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 10.504951] sd 5:0:0:0: [sdc] Write Protect is off [ 10.504959] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 10.505022] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.523010] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.523357] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 10.523583] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 10.527588] sdc: sdc1 sdc2 sdc3 [ 10.528706] sd 5:0:0:0: [sdc] Attached SCSI disk [ 10.551125] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 10.551293] sd 0:0:1:0: [sdb] Write Protect is off [ 10.551302] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 10.551364] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.551604] sda: sda1 sda2 < sda5 > [ 10.559040] sdb: sdb1 [ 10.559490] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.560628] sd 0:0:1:0: [sdb] Attached SCSI disk [ 11.111237] device-mapper: uevent: version 1.0.3 [ 11.112862] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 11.190367] Btrfs loaded [ 11.402315] device fsid 85adef0a-86a4-46ae-81a8-815c13345b9c devid 1 transid 16194 /dev/sdb1 [ 11.407888] PM: Starting manual resume from disk [ 11.407905] PM: Hibernation image partition 8:5 present [ 11.407909] PM: Looking for hibernation image. [ 11.417655] PM: Image not found (code -22) [ 11.417663] PM: Hibernation image not present or could not be loaded. [ 11.492558] kjournald starting. Commit interval 5 seconds [ 11.492664] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 14.833468] udevd[312]: starting version 175 [ 15.366365] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 15.366386] ACPI: Power Button [PWRB] [ 15.366566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 15.366575] ACPI: Power Button [PWRF] [ 15.452285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.460918] parport_pc: VIA 686A/8231 detected [ 15.460926] parport_pc: probing current configuration [ 15.460948] parport_pc: Current parallel port base: 0x378 [ 15.461029] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 15.556431] parport_pc: VIA parallel port: io=0x378, irq=7 [ 15.833593] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 15.970721] via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr [ 16.879116] Error: Driver 'pcspkr' is already registered, aborting... [ 17.065415] device fsid 85adef0a-86a4-46ae-81a8-815c13345b9c devid 1 transid 16194 /dev/sdb1 [ 18.914111] Adding 1632252k swap on /dev/sda5. Priority:-1 extents:1 across:1632252k [ 19.718516] EXT3-fs (sda1): using internal journal [ 20.066638] loop: module loaded [ 21.453412] device fsid 252420bd-7e9b-4ee0-ba57-dd6c6b42280b devid 1 transid 31594 /dev/dm-0 [ 24.547489] e100 0000:00:0c.0: firmware: agent loaded e100/d101m_ucode.bin into memory [ 24.561323] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.564357] e100 0000:00:0c.0: eth0: NIC Link is Up 100 Mbps Full Duplex [ 24.565686] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.944061] eth0: no IPv6 routers present [26136.017186] device fsid 252420bd-7e9b-4ee0-ba57-dd6c6b42280b devid 1 transid 31594 /dev/mapper/backup-data [26136.019037] btrfs: use zlib compression [26600.388205] btrfs: unlinked 1 orphans [26711.047941] ------------[ cut here ]------------ [26711.047979] kernel BUG at /build/buildd-linux_3.2.39-2-i386-4VFKqr/linux-3.2.39/fs/btrfs/inode.c:2933! [26711.048007] invalid opcode: 0000 [#1] SMP [26711.048025] Modules linked in: w83791d hwmon_vid lm80 loop snd_pcm snd_page_alloc snd_timer snd soundcore via686a psmouse pcspkr evdev serio_raw i2c_viapro i2c_core processor parport_pc parport thermal_sys shpchp button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg sd_mod crc_t10dif ata_generic sata_sil24 pata_via libata uhci_hcd ehci_hcd usbcore floppy scsi_mod e100 mii usb_common [last unloaded: scsi_wait_scan] [26711.048025] [26711.048025] Pid: 2905, comm: btrfs Not tainted 3.2.0-4-686-pae #1 Debian 3.2.39-2 /694X-686B [26711.048025] EIP: 0060:[<f8386cde>] EFLAGS: 00010286 CPU: 0 [26711.048025] EIP is at btrfs_unlink_subvol+0x17c/0x1df [btrfs] [26711.048025] EAX: ffffffe4 EBX: 00000000 ECX: f762052c EDX: c39aff00 [26711.048025] ESI: ef572acc EDI: 00000000 EBP: cd050738 ESP: f3e9de40 [26711.048025] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [26711.048025] Process btrfs (pid: 2905, ti=f3e9c000 task=f7121a20 task.ti=f3e9c000) [26711.048025] Stack: [26711.048025] c25dd800 ef572acc ef6093f8 055dd800 00000003 84000000 00005e82 00000000 [26711.048025] 00000e32 00000000 00000000 eab93438 ef572acc c25dd800 f83a2a87 00000305 [26711.048025] 00000000 eab9345c 00000003 f0506400 c3308d4c ef6093f8 c2de8000 d50c7f20 [26711.048025] Call Trace: [26711.048025] [<f83a2a87>] ? btrfs_ioctl_snap_destroy+0x29c/0x3a7 [btrfs] [26711.048025] [<f83a436b>] ? btrfs_ioctl+0x47c/0xda1 [btrfs] [26711.048025] [<c11cc973>] ? tty_wakeup+0x46/0x4a [26711.048025] [<c11d3da7>] ? pty_write+0x39/0x43 [26711.048025] [<c105d7bd>] ? arch_local_irq_save+0xf/0x14 [26711.048025] [<c100b057>] ? __switch_to+0xcb/0x130 [26711.048025] [<c102e1aa>] ? pick_next_task_fair+0xa5/0xad [26711.048025] [<f83a3eef>] ? btrfs_ioctl_trans_end+0x49/0x49 [btrfs] [26711.048025] [<c10d8153>] ? do_vfs_ioctl+0x459/0x48f [26711.048025] [<c12c1498>] ? __schedule+0x54b/0x55b [26711.048025] [<c11cd451>] ? tty_write_lock+0x39/0x39 [26711.048025] [<c10cc0f6>] ? fsnotify_modify+0x48/0x4f [26711.048025] [<c10d81cd>] ? sys_ioctl+0x44/0x67 [26711.048025] [<c12c6cdf>] ? sysenter_do_call+0x12/0x28 [26711.048025] Code: ca 89 d9 e8 79 96 ff ff e8 2e cf cc c8 89 f1 89 46 44 89 56 48 89 46 3c 8b 44 24 08 89 56 40 8b 14 24 e8 c5 d4 ff ff 85 c0 74 02 <0f> 0b 89 e8 e8 a1 f8 fd ff 31 c0 eb 05 b8 f4 ff ff ff 83 c4 28 [26711.048025] EIP: [<f8386cde>] btrfs_unlink_subvol+0x17c/0x1df [btrfs] SS:ESP 0068:f3e9de40 [26711.050199] ---[ end trace ae47279bf1650618 ]--- ** Model information not available ** Loaded modules: w83791d hwmon_vid lm80 loop snd_pcm snd_page_alloc snd_timer snd soundcore via686a psmouse pcspkr evdev serio_raw i2c_viapro i2c_core processor parport_pc parport thermal_sys shpchp button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg sd_mod crc_t10dif ata_generic sata_sil24 pata_via libata uhci_hcd ehci_hcd usbcore floppy scsi_mod e100 mii usb_common ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev c4) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-via 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge [1106:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: parport_pc 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d000 [size=16] Capabilities: <access denied> Kernel driver in use: pata_via 00:07.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) VA-502 Mainboard [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at d400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:07.3 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) VA-502 Mainboard [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at d800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin ? routed to IRQ 9 Capabilities: <access denied> 00:09.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124] (rev 02) Subsystem: Silicon Image, Inc. Device [1095:7124] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e620a000 (64-bit, non-prefetchable) [size=128] Region 2: Memory at e6200000 (64-bit, non-prefetchable) [size=32K] Region 4: I/O ports at dc00 [size=16] [virtual] Expansion ROM at 40200000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: sata_sil24 00:0c.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08) Subsystem: Intel Corporation EtherExpress PRO/100+ Server Adapter [8086:1009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e6209000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e000 [size=64] Region 2: Memory at e6100000 (32-bit, non-prefetchable) [size=1M] [virtual] Expansion ROM at 40000000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 00:0d.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08) Subsystem: Intel Corporation EtherExpress PRO/100+ Server Adapter [8086:1009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e6208000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e400 [size=64] Region 2: Memory at e6000000 (32-bit, non-prefetchable) [size=1M] [virtual] Expansion ROM at 40100000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 00:0e.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Rage XL [1002:0008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at e800 [size=256] Region 2: Memory at e620b000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 40280000 [disabled] [size=128K] Capabilities: <access denied> ** USB devices: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.0 APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-686-pae recommends: ii firmware-linux-free 3.2 ii libc6-i686 2.13-38 Versions of packages linux-image-3.2.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.28 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
--- End Message ---
--- Begin Message ---This bug was filed for a very old kernel. If you can reproduce it with - the current version in unstable/testing - the latest kernel from buster.backports please reopen the bug, see https://www.debian.org/Bugs/server-control
--- End Message ---
