Your message dated Sat, 24 Apr 2021 20:12:12 +0200
with message-id <[email protected]>
and subject line Closing this bug
has caused the Debian Bug report #705345,
regarding linux-image-3.2.0-4-amd64: alx module crashes and requires reboot
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
705345: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=705345
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.41-2
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
Periodically, the alx kernel driver crashes and requires a reboot to bring the
interface back up.
Stack trace from `dmesg` from when this happens:
[174873.336429] alx 0000:02:00.0: eth0: error when reset mac
[175657.940856] ------------[ cut here ]------------
[175657.940867] WARNING: at
/build/buildd-linux_3.2.39-2-amd64-G5_nN0/linux-3.2.39/net/sched/sch_generic.c:256
dev_watchdog+0xf2/0x151()
[175657.940871] Hardware name: To be filled by O.E.M.
[175657.940874] NETDEV WATCHDOG: eth0 (alx): transmit queue 0 timed out
[175657.940876] Modules linked in: nfsd nfs nfs_acl auth_rpcgss fscache lockd
sunrpc xfs loop snd_hda_codec_hdmi snd_hda_codec_realtek evdev coretemp
crc32c_intel ghash_clmulni_intel pcspkr cryptd psmouse serio_raw i915
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm video i2c_i801 snd_page_alloc
drm_kms_helper iTCO_wdt snd_timer drm iTCO_vendor_support snd soundcore
i2c_algo_bit i2c_core acpi_cpufreq mperf button processor ext4 crc16 jbd2
mbcache raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx
raid6_pq md_mod sg sd_mod crc_t10dif ata_generic ehci_hcd ata_piix fan thermal
thermal_sys alx(C) xhci_hcd libata scsi_mod usbcore usb_common [last unloaded:
scsi_wait_scan]
[175657.940933] Pid: 0, comm: swapper/0 Tainted: G C 3.2.0-4-amd64 #1
Debian 3.2.39-2
[175657.940936] Call Trace:
[175657.940938] <IRQ> [<ffffffff81046a35>] ? warn_slowpath_common+0x78/0x8c
[175657.940948] [<ffffffff81046ae1>] ? warn_slowpath_fmt+0x45/0x4a
[175657.940953] [<ffffffff812a5cb1>] ? netif_tx_lock+0x40/0x75
[175657.940959] [<ffffffff812a5e21>] ? dev_watchdog+0xf2/0x151
[175657.940963] [<ffffffff810521d4>] ? run_timer_softirq+0x19a/0x261
[175657.940967] [<ffffffff812a5d2f>] ? netif_tx_unlock+0x49/0x49
[175657.940973] [<ffffffff81065ead>] ? timekeeping_get_ns+0xd/0x2a
[175657.940978] [<ffffffff8104c060>] ? __do_softirq+0xb9/0x177
[175657.940982] [<ffffffff81354bac>] ? call_softirq+0x1c/0x30
[175657.940987] [<ffffffff8100f8dd>] ? do_softirq+0x3c/0x7b
[175657.940991] [<ffffffff8104c2c8>] ? irq_exit+0x3c/0x9a
[175657.940996] [<ffffffff810241e0>] ? smp_apic_timer_interrupt+0x74/0x82
[175657.941000] [<ffffffff8135341e>] ? apic_timer_interrupt+0x6e/0x80
[175657.941002] <EOI> [<ffffffff81023ea8>] ? lapic_next_event+0xe/0x13
[175657.941010] [<ffffffff811ed2ed>] ? intel_idle+0xea/0x119
[175657.941013] [<ffffffff811ed2cc>] ? intel_idle+0xc9/0x119
[175657.941018] [<ffffffff8126edeb>] ? cpuidle_idle_call+0xec/0x179
[175657.941022] [<ffffffff8100d243>] ? cpu_idle+0xa5/0xf2
[175657.941027] [<ffffffff816abb38>] ? start_kernel+0x3b8/0x3c3
[175657.941031] [<ffffffff816ab140>] ? early_idt_handlers+0x140/0x140
[175657.941035] [<ffffffff816ab3c4>] ? x86_64_start_kernel+0x104/0x111
[175657.941038] ---[ end trace 58f0fed758729cc5 ]---
[175657.941691] alx 0000:02:00.0: eth0: error when reset mac
[177350.957296] alx 0000:02:00.0: eth0: error when reset mac
[179048.975222] alx 0000:02:00.0: eth0: error when reset mac
The last message is repeated periodically until I reboot the box.
I've tried removing and re-inserting the module, to no avail.
Regards,
Kim Tore Jensen
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3
(Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
auto BOOT_IMAGE=Linux ro root=UUID=045ed463-dcd5-4132-b7d3-10bf720e27ce quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 2.851689] sdd: sdd1
[ 2.851883] sd 2:0:0:0: [sdd] Attached SCSI disk
[ 2.867181] sdc: sdc1
[ 2.867435] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 2.873294] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.873333] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.873366] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.873399] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 2.963457] sda: sda1
[ 2.980192] sdb: sdb1
[ 2.988770] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.988787] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 3.551146] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts:
(null)
[ 3.842253] udevd[377]: starting version 175
[ 3.870603] ACPI: Requesting acpi_cpufreq
[ 3.879234] iTCO_vendor_support: vendor-support=0
[ 3.880135] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.880229] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by
hardware/BIOS
[ 3.882179] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.882187] ACPI: Power Button [PWRB]
[ 3.882252] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.882256] ACPI: Power Button [PWRF]
[ 3.887287] [drm] Initialized drm 1.1.0 20060810
[ 3.900980] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with
ACPI region SMBI [io 0xf040-0xf04f]
[ 3.900984] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 3.903735] i915 0000:00:02.0: setting latency timer to 64
[ 3.927771] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.928738] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.951941] mtrr: type mismatch for e0000000,10000000 old: write-back new:
write-combining
[ 3.951945] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.952189] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 3.952194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.952195] [drm] Driver supports precise vblank timestamp query.
[ 3.952228] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.996695] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.190501] No connectors reported connected with modes
[ 4.190508] [drm] Cannot find any crtc or sizes - going 1024x768
[ 4.195123] fbcon: inteldrmfb (fb0) is primary device
[ 4.200902] Console: switching to colour frame buffer device 128x48
[ 4.205489] fb0: inteldrmfb frame buffer device
[ 4.205492] drm: registered panic notifier
[ 4.263060] acpi device:4d: registered as cooling_device9
[ 4.263351] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 4.263416] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.263438] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.263562] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 4.263599] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.818031] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 4.818223] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 5.153969] md: md0 stopped.
[ 5.156856] md: bind<sdb1>
[ 5.158502] md: bind<sdc1>
[ 5.158693] md: bind<sda1>
[ 5.165530] async_tx: api initialized (async)
[ 5.166076] xor: automatically using best checksumming function: generic_sse
[ 5.185269] generic_sse: 7038.000 MB/sec
[ 5.185274] xor: using function: generic_sse (7038.000 MB/sec)
[ 5.253189] raid6: int64x1 2777 MB/s
[ 5.321117] raid6: int64x2 2670 MB/s
[ 5.389026] raid6: int64x4 2527 MB/s
[ 5.456955] raid6: int64x8 2060 MB/s
[ 5.524870] raid6: sse2x1 6989 MB/s
[ 5.592789] raid6: sse2x2 8617 MB/s
[ 5.660711] raid6: sse2x4 10042 MB/s
[ 5.660713] raid6: using algorithm sse2x4 (10042 MB/s)
[ 5.665615] md: raid6 personality registered for level 6
[ 5.665618] md: raid5 personality registered for level 5
[ 5.665620] md: raid4 personality registered for level 4
[ 5.665973] bio: create slab <bio-1> at 1
[ 5.665991] md/raid:md0: device sda1 operational as raid disk 0
[ 5.665994] md/raid:md0: device sdc1 operational as raid disk 2
[ 5.665996] md/raid:md0: device sdb1 operational as raid disk 1
[ 5.666298] md/raid:md0: allocated 3228kB
[ 5.666330] md/raid:md0: raid level 5 active with 3 out of 3 devices,
algorithm 2
[ 5.666333] RAID conf printout:
[ 5.666335] --- level:5 rd:3 wd:3
[ 5.666337] disk 0, o:1, dev:sda1
[ 5.666339] disk 1, o:1, dev:sdb1
[ 5.666341] disk 2, o:1, dev:sdc1
[ 5.666373] md0: detected capacity change from 0 to 4000526106624
[ 5.713976] md0: p1
[ 6.158565] EXT4-fs (sdd1): re-mounted. Opts: (null)
[ 6.206181] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro
[ 6.238794] loop: module loaded
[ 6.615283] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 6.615625] SGI XFS Quota Management subsystem
[ 6.637351] XFS (md0p1): Mounting Filesystem
[ 6.978422] XFS (md0p1): Ending clean mount
[ 7.292109] RPC: Registered named UNIX socket transport module.
[ 7.292115] RPC: Registered udp transport module.
[ 7.292118] RPC: Registered tcp transport module.
[ 7.292121] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.297568] FS-Cache: Loaded
[ 7.306387] FS-Cache: Netfs 'nfs' registered for caching
[ 7.311182] Installing knfsd (copyright (C) 1996 [email protected]).
[ 7.679120] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 7.680207] NFSD: starting 90-second grace period
[ 7.954473] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.955407] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.469761] eth0: no IPv6 routers present
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z77-DS3H
board_version: x.x
** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
xfs
loop
raid456
async_raid6_recov
async_memcpy
async_pq
raid6_pq
async_xor
xor
async_tx
md_mod
snd_hda_codec_hdmi
snd_hda_codec_realtek
coretemp
crc32c_intel
evdev
ghash_clmulni_intel
cryptd
pcspkr
psmouse
serio_raw
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
snd
soundcore
i915
i2c_i801
video
drm_kms_helper
drm
button
i2c_algo_bit
i2c_core
iTCO_wdt
acpi_cpufreq
iTCO_vendor_support
mperf
processor
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ata_generic
fan
thermal
thermal_sys
xhci_hcd
ata_piix
ehci_hcd
libata
scsi_mod
alx(C)
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 10.0.0.3
netmask 255.255.255.0
gateway 10.0.0.1
up true
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 90:2b:34:57:8a:3a brd ff:ff:ff:ff:ff:ff
inet 10.0.0.3/24 brd 10.0.0.255 scope global eth0
inet6 fe80::922b:34ff:fe57:8a3a/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 5620 96 0 0 0 0 0 0 5620
96 0 0 0 0 0 0
eth0: 6716022 72158 0 0 0 0 0 0 132125781
115685 0 0 0 0 1 0
*** Protocol statistics:
Ip:
72216 total packets received
0 forwarded
0 incoming packets discarded
72216 incoming packets delivered
57369 requests sent out
4 dropped because of missing route
Icmp:
229 ICMP messages received
61 input ICMP message failed.
ICMP input histogram:
destination unreachable: 224
timeout in transit: 5
730 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 730
IcmpMsg:
InType3: 224
InType11: 5
OutType3: 730
Tcp:
4442 active connections openings
213 passive connection openings
339 failed connection attempts
65 connection resets received
4 connections established
70766 segments received
107021 segments send out
7744 segments retransmited
4 bad segments received.
43 resets sent
Udp:
276 packets received
730 packets to unknown port received.
0 packet receive errors
229 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
12 resets received for embryonic SYN_RECV sockets
259 TCP sockets finished time wait in fast timer
1 packets rejects in established connections because of timestamp
777 delayed acks sent
18 delayed acks further delayed because of locked socket
Quick ack mode was activated 73 times
2 packets directly queued to recvmsg prequeue.
4730 packet headers predicted
34520 acknowledgments not containing data payload received
23314 predicted acknowledgments
339 times recovered from packet loss by selective acknowledgements
9 congestion windows recovered without slow start by DSACK
115 congestion windows recovered without slow start after partial ack
929 TCP data loss events
TCPLostRetransmit: 6
2 timeouts after SACK recovery
908 fast retransmits
2 forward retransmits
1 retransmits in slow start
1647 other TCP timeouts
59 DSACKs sent for old packets
19 DSACKs received
28 connections reset due to early user close
3 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 8
TCPSackShifted: 5373
TCPSackMerged: 3009
TCPSackShiftFallback: 843
TCPChallengeACK: 4
TCPSYNChallenge: 4
IpExt:
InBcastPkts: 363
OutBcastPkts: 55
InOctets: 5715362
OutOctets: 128137510
InBcastOctets: 60644
OutBcastOctets: 8348
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Giga-byte Technology Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Giga-byte Technology Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7d19000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d16000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller
[8086:1e44] (rev 04)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset
Family 4-port SATA Controller [IDE mode] [8086:1e00] (rev 04) (prog-if 8f
[Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f110 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f0f0 [size=8]
Region 3: I/O ports at f0e0 [size=4]
Region 4: I/O ports at f0d0 [size=16]
Region 5: I/O ports at f0c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset
Family 2-port SATA Controller [IDE mode] [8086:1e08] (rev 04) (prog-if 85
[Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f070 [size=16]
Region 5: I/O ports at f060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit
Ethernet [1969:1091] (rev 10)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
03:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
41) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
ii lilo 1:23.2-4
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
--- End Message ---
