--- Begin Message ---
Package: src:linux
Version: 3.2.46-1
Severity: normal
I have a small server with ASUS H87-PRO matherboard and RTL8111/8168B PCI
Express Gigabit Ethernet controller what ethernet controller I use for internal
network.
When I'm starting Apache Bench (ab) from my PC which has the same motherboard
and ethernet controller, the ethernet controller on the server RTL8111/8168B
stops responding. The command is:
$ ab -c 500 -n 20000 http://server-for-testing-on-the-internet
Here is the messages from /var/log/messages file on the server(router):
Aug 17 19:04:08 bambi2 kernel: [ 461.014424] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:08 bambi2 kernel: [ 461.046377] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.078303] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.114228] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.146138] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.182056] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.213983] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.245927] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.281845] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:09 bambi2 kernel: [ 461.313774] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:14 bambi2 kernel: [ 466.410112] net_ratelimit: 22 callbacks
suppressed
Aug 17 19:04:14 bambi2 kernel: [ 466.410121] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:15 bambi2 kernel: [ 467.551505] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:15 bambi2 kernel: [ 467.679201] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:15 bambi2 kernel: [ 467.806904] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:15 bambi2 kernel: [ 467.934643] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:16 bambi2 kernel: [ 468.297812] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:22 bambi2 kernel: [ 474.335970] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:22 bambi2 kernel: [ 474.371878] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:22 bambi2 kernel: [ 474.591397] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:22 bambi2 kernel: [ 474.846800] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:23 bambi2 kernel: [ 475.102213] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:29 bambi2 kernel: [ 481.778949] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:29 bambi2 kernel: [ 481.810858] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:29 bambi2 kernel: [ 481.842793] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:30 bambi2 kernel: [ 482.397531] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:31 bambi2 kernel: [ 483.227632] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:35 bambi2 kernel: [ 487.904927] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:35 bambi2 kernel: [ 487.940840] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:36 bambi2 kernel: [ 488.415765] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:36 bambi2 kernel: [ 488.926579] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:37 bambi2 kernel: [ 489.437420] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:42 bambi2 kernel: [ 494.881007] r8169 0000:03:00.0: eth3: link up
Aug 17 19:04:56 bambi2 kernel: [ 508.178476] r8169 0000:03:00.0: eth3: link up
Aug 17 19:05:03 bambi2 kernel: [ 515.010918] r8169 0000:03:00.0: eth3: link up
Aug 17 19:05:04 bambi2 kernel: [ 516.032599] r8169 0000:03:00.0: eth3: link up
Aug 17 19:05:05 bambi2 kernel: [ 517.054235] r8169 0000:03:00.0: eth3: link up
Aug 17 19:05:06 bambi2 kernel: [ 518.075889] r8169 0000:03:00.0: eth3: link up
Aug 17 19:05:22 bambi2 kernel: [ 534.805640] r8169 0000:03:00.0: eth3: link up
The most intersting part is that my PC has the same motherboard and network
controller, but in its /var/log/messages are not exist such messages.
I have not noticed other problems with that controller or driver so far except
this one with Apache Bench.
Best regards
Georgi
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=b252cea4-f101-4ff3-b80f-9fe8d6aae889 ro quiet
** Not tainted
** Kernel log:
[ 1.741975] hub 2-1:1.0: USB hub found
[ 1.742080] hub 2-1:1.0: 8 ports detected
[ 1.769406] Refined TSC clocksource calibration: 3192.606 MHz.
[ 1.769408] Switching to clocksource tsc
[ 1.878205] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 1.879112] platform microcode: firmware: agent aborted loading
intel-ucode/06-3c-03 (not found?)
[ 1.879164] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 1.880069] platform microcode: firmware: agent aborted loading
intel-ucode/06-3c-03 (not found?)
[ 1.880117] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 1.881026] platform microcode: firmware: agent aborted loading
intel-ucode/06-3c-03 (not found?)
[ 1.881072] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 1.881987] platform microcode: firmware: agent aborted loading
intel-ucode/06-3c-03 (not found?)
[ 1.882073] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 1.899249] md: md2 stopped.
[ 1.899588] md: bind<sdb2>
[ 1.899674] md: bind<sda2>
[ 1.900258] md: raid1 personality registered for level 1
[ 1.900353] bio: create slab <bio-1> at 1
[ 1.900391] md/raid1:md2: active with 2 out of 2 mirrors
[ 1.900403] md2: detected capacity change from 0 to 1888419840
[ 1.908362] md2: unknown partition table
[ 1.909072] usb 3-10: new low-speed USB device number 2 using xhci_hcd
[ 1.914661] md: md3 stopped.
[ 1.914998] md: bind<sdb3>
[ 1.915072] md: bind<sda3>
[ 1.915558] md/raid1:md3: active with 2 out of 2 mirrors
[ 1.915571] md3: detected capacity change from 0 to 998044662784
[ 1.923423] md3: unknown partition table
[ 2.196590] kjournald starting. Commit interval 5 seconds
[ 2.196706] EXT3-fs (md3): mounted filesystem with ordered data mode
[ 3.095342] usb 3-10: New USB device found, idVendor=0463, idProduct=ffff
[ 3.095344] usb 3-10: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.095345] usb 3-10: Product: NOVA AVR
[ 3.095346] usb 3-10: Manufacturer: EATON
[ 3.095398] usb 3-10: ep 0x81 - rounding interval to 128 microframes, ep
desc says 160 microframes
[ 3.661616] udevd[467]: starting version 175
[ 3.877095] wmi: Mapper loaded
[ 3.932426] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.932430] ACPI: Power Button [PWRB]
[ 3.932457] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.932459] ACPI: Power Button [PWRF]
[ 3.935069] EFI Variables Facility v0.08 2004-May-17
[ 3.967233] ACPI: Requesting acpi_cpufreq
[ 3.967727] Monitor-Mwait will be used to enter C-1 state
[ 3.967733] Monitor-Mwait will be used to enter C-2 state
[ 3.967739] ACPI: acpi_idle registered with cpuidle
[ 4.010120] iTCO_vendor_support: vendor-support=0
[ 4.020439] udevd[535]: renamed network interface eth1 to eth2
[ 4.036397] udevd[549]: renamed network interface eth0 to eth3
[ 4.067605] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 4.067632] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X
[ 4.067644] snd_hda_intel 0000:00:03.0: setting latency timer to 64
[ 4.105150] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.140279] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.157205] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.157258] iTCO_wdt: Found a Lynx Point TCO device (Version=2,
TCOBASE=0x1860)
[ 4.157315] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.243080] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.339153] asus_wmi: ASUS WMI generic driver loaded
[ 4.340170] asus_wmi: Initialization: 0x0
[ 4.340184] asus_wmi: BIOS WMI version: 0.9
[ 4.340207] asus_wmi: SFUN value: 0x0
[ 4.340368] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input3
[ 4.340851] asus_wmi: Backlight controlled by ACPI video driver
[ 6.932992] generic-usb 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v1.00
Device [EATON NOVA AVR] on usb-0000:00:14.0-10/input0
[ 6.933028] usbcore: registered new interface driver usbhid
[ 6.933032] usbhid: USB HID core driver
[ 7.085165] hda-intel: azx_get_response timeout, switching to polling mode:
last cmd=0x000f0000
[ 8.086844] hda-intel: No response from codec, disabling MSI: last
cmd=0x000f0000
[ 9.088526] hda-intel: Codec #0 probe error; disabling it...
[ 10.106168] hda_intel: azx_get_response timeout, switching to single_cmd
mode: last cmd=0x000f0001
[ 10.111000] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 10.111160] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 10.111202] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.171758] hda_codec: ALC887-VD: BIOS auto-probing.
[ 10.180157] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 10.181332] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with
ACPI region SMBI [io 0xf040-0xf04f]
[ 10.181340] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 10.834037] Adding 1844156k swap on /dev/md2. Priority:-1 extents:1
across:1844156k
[ 11.044719] EXT3-fs (md3): using internal journal
[ 11.160955] loop: module loaded
[ 12.668909] r8169 0000:03:00.0: eth3: link down
[ 12.668922] r8169 0000:03:00.0: eth3: link down
[ 12.671236] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 13.074901] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.177940] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.184536] 8139too 0000:05:01.0: eth2: link up, 100Mbps, full-duplex, lpa
0x45E1
[ 13.259747] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.273817] IPv6 over IPv4 tunneling driver
[ 13.523286] RPC: Registered named UNIX socket transport module.
[ 13.523287] RPC: Registered udp transport module.
[ 13.523288] RPC: Registered tcp transport module.
[ 13.523289] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.574214] FS-Cache: Loaded
[ 13.610370] FS-Cache: Netfs 'nfs' registered for caching
[ 13.626254] Installing knfsd (copyright (C) 1996 [email protected]).
[ 15.287662] r8169 0000:03:00.0: eth3: link up
[ 15.288193] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 16.878866] usb 3-10: ep 0x81 - rounding interval to 128 microframes, ep
desc says 160 microframes
[ 20.867101] postgres (3924): /proc/3924/oom_adj is deprecated, please use
/proc/3924/oom_score_adj instead.
** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0703
board_vendor: ASUSTeK COMPUTER INC.
board_name: H87-PRO
board_version: Rev X.0x
** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
sit
tunnel4
ip6table_filter
ip6_tables
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
xt_mark
iptable_mangle
xt_tcpudp
xt_multiport
iptable_filter
ip_tables
x_tables
k8temp
hwmon_vid
eeprom
i2c_nforce2
firewire_sbp2
firewire_core
crc_itu_t
loop
snd_hda_codec_realtek
usbhid
hid
eeepc_wmi
asus_wmi
coretemp
sparse_keymap
i2c_i801
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
aes_generic
cryptd
rfkill
iTCO_wdt
psmouse
acpi_cpufreq
pcspkr
evdev
serio_raw
mperf
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
snd
i2c_core
iTCO_vendor_support
video
processor
soundcore
efivars
button
wmi
ext3
mbcache
jbd
raid1
md_mod
microcode
sr_mod
sg
cdrom
sd_mod
crc_t10dif
xhci_hcd
8139too
8139cp
fan
thermal
thermal_sys
ahci
libahci
ehci_hcd
libata
scsi_mod
r8169
mii
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM Controller
[8086:0c00] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:01.0 PCI bridge [0604]: Intel Corporation Haswell PCI Express x16 Controller
[8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4169
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Latency
L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep- BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Capabilities: [d94 v1] #19
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell Integrated
Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
00:03.0 Audio device [0403]: Intel Corporation Haswell HD Audio Controller
[8086:0c0c] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4189
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB xHCI Host
Controller [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4181
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point MEI
Controller #1 [8086:8c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host
Controller #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point High Definition Audio
Controller [8086:8c20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4199
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=2 ArbSelect=Fixed TC/VC=04
Status: NegoPending- InProgress-
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port
#1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train+ SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port
#3 [8086:8c14] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host
Controller #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC Controller
[8086:8c4a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point 6-port SATA
Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4179
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus Controller [8086:8c22]
(rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0c)
Subsystem: ASUSTeK Computer Inc. Device [1043:8554]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4171
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Capabilities: [170 v1] Latency Tolerance Reporting
Max snoop latency: 71680ns
Max no snoop latency: 71680ns
Kernel driver in use: r8169
04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
Bridge [1b21:1080] (rev 03) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [c0] Subsystem: ASUSTeK Computer Inc. Device [1043:8489]
05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
[10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f7c10000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f7c00000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 002: ID 0463:ffff MGE UPS Systems UPS
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
* linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
