Your message dated Sat, 24 Apr 2021 22:53:31 -0700 (PDT) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #742321, regarding linux-image-3.11-2-amd64: switch to VT on laptop with external screen doesn't update external screen to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 742321: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742321 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 3.11.10-1 Severity: normal I usually use my laptop with an external screen, using: xrandr --fb 1920x1200 --output VGA-1 --mode 1920x1200 \ --output LVDS-1 --panning 1920x1200 && \ xrandr --output LVDS-1 --off in my .xsession script. But when I switch to a VT with Ctrl-Alt-F1, the contents of the external screen remains frozen, until I type Ctrl-Alt-F7 to go back to X. Then I did: xrandr --output LVDS-1 --auto and tried the same thing. Everything was OK on the laptop screen, but the problem remained with the external screen. -- Package-specific info: ** Version: Linux version 3.11-2-amd64 ([email protected]) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04) ** Command line: root=/dev/mapper/xvii-root ro quiet reboot=pci ** Not tainted ** Kernel log: [10224.200312] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b [10224.200312] Enabling non-boot CPUs ... [10224.200312] smpboot: Booting Node 0 Processor 1 APIC 0x1 [10224.212681] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [10224.216677] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [10224.220940] CPU1 is up [10224.223325] ACPI: Waking up from system sleep state S3 [10224.277204] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI [10224.282368] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI [10224.288144] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI [10224.309058] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI [10224.329250] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [10224.334306] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [10224.339325] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [10224.356808] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [10224.404240] yenta_cardbus 0000:03:01.0: proprietary Ricoh MMC controller disabled (via cardbus function) [10224.404242] yenta_cardbus 0000:03:01.0: MMC cards are now supported by standard SDHCI controller [10224.436384] PM: noirq resume of devices complete after 179.616 msecs [10224.436581] PM: early resume of devices complete after 0.162 msecs [10224.436616] pci0000:00: System wakeup disabled by ACPI [10224.436626] e1000e 0000:00:19.0: setting latency timer to 64 [10224.436657] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [10224.438800] pci 0000:00:1e.0: setting latency timer to 64 [10224.438816] ahci 0000:00:1f.2: setting latency timer to 64 [10224.438949] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to disable radio. [10224.439205] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [10224.439235] usb usb3: root hub lost power or was reset [10224.439281] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [10224.439309] usb usb2: root hub lost power or was reset [10224.439596] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [10224.439622] usb usb4: root hub lost power or was reset [10224.439789] ehci-pci 0000:00:1a.7: setting latency timer to 64 [10224.439996] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [10224.440207] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [10224.440234] usb usb5: root hub lost power or was reset [10224.440383] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [10224.440409] usb usb6: root hub lost power or was reset [10224.440576] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [10224.440603] usb usb7: root hub lost power or was reset [10224.440750] ehci-pci 0000:00:1d.7: setting latency timer to 64 [10224.440774] nouveau [ DRM] re-enabling device... [10224.440854] nouveau [ DRM] resuming kernel object tree... [10224.440862] nouveau [ VBIOS][0000:01:00.0] running init tables [10224.553632] serial 00:08: activated [10224.646752] nouveau [ DRM] resuming client object trees... [10224.647315] nouveau [ DRM] resuming display... [10224.776064] usb 1-6: reset high-speed USB device number 4 using ehci-pci [10224.780056] ata5: SATA link down (SStatus 0 SControl 300) [10224.788062] ata6: SATA link down (SStatus 0 SControl 300) [10224.944078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10225.012865] ata2.00: configured for UDMA/100 [10225.054966] dell_wmi: Received unknown WMI event (0x11) [10225.144090] firewire_core 0000:03:01.1: rediscovered device fw0 [10227.896093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10227.905758] ata1.00: configured for UDMA/133 [10227.920132] sd 0:0:0:0: [sda] Starting disk [10228.068228] PM: resume of devices complete after 3631.643 msecs [10228.068567] PM: Finishing wakeup. [10228.068569] Restarting tasks ... done. [10228.077436] video LNXVIDEO:00: Restoring backlight state [10228.710908] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [10228.716208] usb 4-1: USB disconnect, device number 4 [10228.812427] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [10228.812904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10228.956094] usb 4-1: new full-speed USB device number 5 using uhci_hcd [10229.134357] usb 4-1: New USB device found, idVendor=0a5c, idProduct=5800 [10229.134369] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10229.134376] usb 4-1: Product: 5880 [10229.134382] usb 4-1: Manufacturer: Broadcom Corp [10229.134388] usb 4-1: SerialNumber: 0123456789ABCD [10229.134682] usb 4-1: config 0 descriptor?? [10229.512083] usb 2-1: new full-speed USB device number 8 using uhci_hcd [10245.217187] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [10245.217308] e1000e 0000:00:19.0 eth0: Link Speed was downgraded by SmartSpeed [10245.217315] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [10245.217369] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [10245.244072] device eth0 entered promiscuous mode [10251.960208] e1000e: eth0 NIC Link is Down [10255.304066] device eth0 left promiscuous mode [10272.741194] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [10283.714907] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [10283.816401] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [10283.816887] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [10286.797192] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [10286.797358] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [10286.816167] device eth0 entered promiscuous mode [10296.827030] device eth0 left promiscuous mode [36188.309630] opendkim[3358]: segfault at ffffffff000002f8 ip 00007fd24f798080 sp 00007fffc748fdf8 error 5 in libpthread-2.18.so[7fd24f78b000+18000] [41708.452136] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [162143.776513] systemd-udevd[5193]: starting version 204 [162217.369527] traps: ld-linux-x32.so[6965] general protection ip:f7749bbd sp:ff818168 error:0 in ld-2.18.so[f7733000+20000] [162217.487482] traps: ld-linux-x32.so[6979] general protection ip:f7738bbd sp:ffefaff8 error:0 in ld-2.18.so[f7722000+20000] [162217.516378] traps: ld-linux-x32.so[6993] general protection ip:f775ebbd sp:ff9a21f8 error:0 in ld-2.18.so[f7748000+20000] [162217.547355] traps: ld-linux-x32.so[7007] general protection ip:f77c3bbd sp:ff8a3778 error:0 in ld-2.18.so[f77ad000+20000] [162217.557462] traps: ld-linux-x32.so[7021] general protection ip:f776bbbd sp:fff3e9e8 error:0 in ld-2.18.so[f7755000+20000] [162217.567392] traps: ld-linux-x32.so[7035] general protection ip:f7709bbd sp:ffc08fd8 error:0 in ld-2.18.so[f76f3000+20000] [162217.577545] traps: ld-linux-x32.so[7049] general protection ip:f77d9bbd sp:fff032d8 error:0 in ld-2.18.so[f77c3000+20000] [162220.871721] traps: ld-linux-x32.so[7368] general protection ip:f776cbbd sp:fff01368 error:0 in ld-2.18.so[f7756000+20000] [162226.413547] traps: ld-linux-x32.so[7952] general protection ip:f771abbd sp:ffa38da8 error:0 in ld-2.18.so[f7704000+20000] [344930.456475] dell_wmi: Received unknown WMI event (0x11) ** Model information sys_vendor: Dell Inc. product_name: Latitude E6400 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A12 board_vendor: Dell Inc. board_name: 0K672N board_version: ** Loaded modules: cpuid hid_apple xt_multiport iptable_filter ip_tables x_tables cuse cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative bnep rfcomm binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc firewire_sbp2 loop fuse parport_pc ppdev lp parport btusb bluetooth joydev uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media coretemp dell_wmi arc4 sparse_keymap kvm iwldvm dell_laptop dcdbas evdev nouveau mac80211 iTCO_wdt iTCO_vendor_support psmouse microcode snd_hda_codec_idt pcspkr serio_raw snd_hda_intel pcmcia mxm_wmi wmi snd_hda_codec i2c_i801 yenta_socket pcmcia_rsrc pcmcia_core battery button video ac ttm snd_hwdep snd_pcm acpi_cpufreq drm_kms_helper drm snd_page_alloc snd_seq iwlwifi snd_seq_device cfg80211 mperf snd_timer snd soundcore rfkill i2c_algo_bit i2c_core lpc_ich processor mfd_core ext4 crc16 mbcache jbd2 sha256_generic cbc hid_generic usbhid hid dm_crypt dm_mod sg sr_mod sd_mod cdrom crc_t10dif firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci mmc_core ahci libahci libata scsi_mod thermal thermal_sys uhci_hcd ehci_pci ehci_hcd usbcore usb_common e1000e ptp pps_core ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: Dell Device [1028:0233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f2000000-f6efffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at efe0 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6fa0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: Dell Device [1028:0233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0600000-f07fffff Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f1f00000-f1ffffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f0000000-f01fffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f20 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: f1e00000-f1efffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 03) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 45 Region 0: I/O ports at 6e70 [size=8] Region 1: I/O ports at 6e78 [size=4] Region 2: I/O ports at 6e80 [size=8] Region 3: I/O ports at 6e88 [size=4] Region 4: I/O ports at 6ea0 [size=32] Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1100 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba) Subsystem: Dell Device [1028:0233] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: f0c00000-f0ffffff (prefetchable) Memory window 1: f1000000-f13fffff I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: <access denied> Kernel driver in use: yenta_cardbus 03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:0233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f1eff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01) Subsystem: Dell Device [1028:0233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at f1eff600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235] Subsystem: Intel Corporation Device [8086:1121] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi ** USB devices: Bus 008 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 008 Device 003: ID 05ac:0221 Apple, Inc. Aluminum Keyboard (ISO) Bus 008 Device 002: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0c45:63f8 Microdia Sonix Integrated Webcam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 005: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.11-2-amd64 (SMP w/2 CPU cores) Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.11-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.52 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 16-2 ii linux-base 3.5 ii module-init-tools 16-2 Versions of packages linux-image-3.11-2-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.11-2-amd64 suggests: ii debian-kernel-handbook 1.0.15 pn grub-pc | extlinux | lilo <none> ii linux-doc-3.11 3.11.10-1 Versions of packages linux-image-3.11-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.41 pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
