Your message dated Sun, 25 Apr 2021 10:29:29 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #761825,
regarding linux-image-3.16-1-amd64: Now Bluetooth errors on system boot
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
761825: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=761825
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.16.2-3
Severity: normal
Dear Maintainer,
since I upgraded to the linux 3.16 packages, I am getting the following
bluetooth error on every system boot:
kernel: Bluetooth: hci0 sending initial HCI reset command failed (-19)
I saw so such error with the 3.14 kernel.
This is with the Intel Wireless 7260 proviging WLAN and Bluetooth. I cannot
tell whether Bluetooth
actually works, as I do not have a Bluetooth-capable device. However,
bluetoothd shows the following
errors in its log:
Sep 15 22:37:31 r-schnelltop bluetoothd[836]: sap-server: Operation not
permitted (1)
Sep 15 22:37:31 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters
failed: Unknown Command (0x01)
Sep 16 11:15:58 r-schnelltop bluetoothd[836]: Sap driver initialization
failed.
Sep 16 11:15:58 r-schnelltop bluetoothd[836]: sap-server: Operation not
permitted (1)
Sep 16 11:15:58 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters
failed: Unknown Command (0x01)
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: Sap driver initialization
failed.
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: sap-server: Operation not
permitted (1)
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters
failed: Unknown Command (0x01)
Sep 16 11:41:24 r-schnelltop bluetoothd[836]: Failed to set mode: Blocked
through rfkill (0x12)
Sep 16 11:42:01 r-schnelltop bluetoothd[836]: Failed to set mode: Blocked
through rfkill (0x12)
Sometimes, there are more Bluetooth errors on boot. In this case, the following
BT-related messages
are in the log:
Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0: read Intel version:
370710018002030d00
Sep 14 14:06:50 r-schnelltop kernel: bluetooth hci0: firmware: direct-loading
firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0: Intel Bluetooth
firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0 sending Intel patch
command (0xfc8e) failed (-19)
Sep 14 14:06:52 r-schnelltop kernel: Bluetooth: hci0 command 0xfc8e tx timeout
Sep 14 14:06:52 r-schnelltop kernel: Bluetooth: hci0 sending frame failed
Sep 14 14:06:54 r-schnelltop kernel: Bluetooth: hci0 command 0xfc11 tx timeout
Sep 14 14:07:00 r-schnelltop kernel: Bluetooth: hci0 exiting Intel
manufacturer mode failed (-110)
This happens in less than 1 of 10 boots.
Boot takes longer than usual in this case, there is a ~5s delay between
mounting the last disk and the
display manager appearing (normally, it's less than a second). I never saw
these messages with earlier
kernels, but I did sometimes experience a delayed boot, which may or may not
have had the same cause.
Kind regards
Ralf
-- Package-specific info:
** Version:
Linux version 3.16-1-amd64 ([email protected]) (gcc version 4.8.3
(Debian 4.8.3-10) ) #1 SMP Debian 3.16.2-3 (2014-09-13)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-1-amd64 root=/dev/mapper/cryptvg-rootlv ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[17468.783135] PM: late suspend of devices complete after 15.972 msecs
[17468.784528] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
[17468.784553] r8169 0000:05:00.0: System wakeup enabled by ACPI
[17468.784877] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[17468.784989] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[17468.799423] PM: noirq suspend of devices complete after 16.262 msecs
[17468.800026] ACPI: Preparing to enter system sleep state S3
[17468.800435] PM: Saving platform NVS memory
[17468.802183] Disabling non-boot CPUs ...
[17468.802313] intel_pstate CPU 1 exiting
[17468.803914] kvm: disabling virtualization on CPU1
[17468.803948] smpboot: CPU 1 is now offline
[17468.804698] intel_pstate CPU 2 exiting
[17468.806180] kvm: disabling virtualization on CPU2
[17468.907180] smpboot: CPU 2 is now offline
[17468.907977] intel_pstate CPU 3 exiting
[17468.909405] kvm: disabling virtualization on CPU3
[17469.011295] smpboot: CPU 3 is now offline
[17469.013480] ACPI: Low-level resume complete
[17469.013519] PM: Restoring platform NVS memory
[17469.013992] Enabling non-boot CPUs ...
[17469.014072] x86: Booting SMP configuration:
[17469.014073] smpboot: Booting Node 0 Processor 1 APIC 0x2
[17469.024823] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[17469.025055] kvm: enabling virtualization on CPU1
[17469.027275] Intel pstate controlling: cpu 1
[17469.027335] CPU1 is up
[17469.027393] smpboot: Booting Node 0 Processor 2 APIC 0x1
[17469.037954] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[17469.038703] kvm: enabling virtualization on CPU2
[17469.040922] Intel pstate controlling: cpu 2
[17469.040981] CPU2 is up
[17469.041046] smpboot: Booting Node 0 Processor 3 APIC 0x3
[17469.052026] kvm: enabling virtualization on CPU3
[17469.054261] Intel pstate controlling: cpu 3
[17469.054320] CPU3 is up
[17469.057284] ACPI: Waking up from system sleep state S3
[17469.074162] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
[17469.074313] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[17469.074399] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[17469.074468] PM: noirq resume of devices complete after 15.197 msecs
[17469.074735] PM: early resume of devices complete after 0.232 msecs
[17469.074800] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[17469.075148] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[17469.077436] usb usb1: root hub lost power or was reset
[17469.077437] usb usb2: root hub lost power or was reset
[17469.078951] r8169 0000:05:00.0: System wakeup disabled by ACPI
[17469.086334] sd 0:0:0:0: [sda] Starting disk
[17469.087246] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[17469.087251] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[17469.087255] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[17469.087260] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[17469.087264] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[17469.087402] sd 1:0:0:0: [sdb] Starting disk
[17469.149445] [drm] Wrong MCH_SSKPD value: 0x16040307
[17469.149446] [drm] This can cause pipe underruns and display issues.
[17469.149446] [drm] Please upgrade your BIOS to fix this.
[17469.221686] r8169 0000:05:00.0 eth0: link down
[17469.301764] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci
[17469.405739] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[17469.406644] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[17469.465984] usb 3-1.2: reset high-speed USB device number 4 using ehci-pci
[17469.488550] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[17469.488699] ata2.00: configured for UDMA/133
[17469.604658] PM: resume of devices complete after 529.311 msecs
[17469.605174] PM: Finishing wakeup.
[17469.605177] Restarting tasks ... done.
[17469.606789] video LNXVIDEO:00: Restoring backlight state
[17469.608499] bbswitch: disabling discrete graphics
[17469.608519] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[17469.686149] usb 3-1.1: new full-speed USB device number 8 using ehci-pci
[17469.692510] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[17469.780120] usb 3-1.1: New USB device found, idVendor=8087, idProduct=07dc
[17469.780123] usb 3-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[17469.793486] Bluetooth: hci0: read Intel version: 370710018002030d00
[17469.793541] bluetooth hci0: firmware: direct-loading firmware
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[17469.793545] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[17469.833951] r8169 0000:05:00.0 eth0: link down
[17469.834013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[17469.834915] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[17469.835160] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[17469.848724] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17469.975781] Bluetooth: hci0: Intel Bluetooth firmware patch completed and
activated
[17470.751271] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[17471.696332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17471.698007] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[17471.698016] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[17471.698021] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[17471.701055] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[17471.701065] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[17471.701072] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[17471.702213] ata1.00: configured for UDMA/133
[17482.719462] wlan0: authenticate with 80:1f:02:77:77:46
[17482.722525] wlan0: send auth to 80:1f:02:77:77:46 (try 1/3)
[17482.724356] wlan0: authenticated
[17482.725285] wlan0: associate with 80:1f:02:77:77:46 (try 1/3)
[17482.729301] wlan0: RX AssocResp from 80:1f:02:77:77:46 (capab=0x411 status=0
aid=2)
[17482.732501] wlan0: associated
[17482.732563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18892.067200] capability: warning: `VirtualBox' uses 32-bit capabilities
(legacy support in use)
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K53SM
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K53SM.214
board_vendor: ASUSTeK Computer Inc.
board_name: K53SM
board_version: 1.0
** Loaded modules:
hid_generic
usbhid
hid
nls_utf8
nls_cp437
vfat
fat
mmc_block
rtsx_usb_sdmmc
rtsx_usb_ms
mmc_core
memstick
rtsx_usb
ctr
ccm
bnep
bbswitch(O)
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
binfmt_misc
vboxdrv(O)
joydev
arc4
ecb
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
btusb
videodev
media
bluetooth
6lowpan_iphc
iTCO_wdt
iTCO_vendor_support
asus_nb_wmi
asus_wmi
iwlmvm
sparse_keymap
mxm_wmi
mac80211
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
snd_hda_codec_hdmi
kvm
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_intel
snd_hda_controller
iwlwifi
snd_hda_codec
snd_hwdep
snd_pcm
pcspkr
cfg80211
snd_timer
snd
mei_me
soundcore
rfkill
psmouse
mei
serio_raw
i2c_i801
shpchp
lpc_ich
mfd_core
wmi
battery
ac
evdev
processor
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
cuse
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
i915
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ehci_pci
ahci
xhci_hcd
ehci_hcd
libahci
libata
i2c_algo_bit
r8169
mii
drm_kms_helper
scsi_mod
usbcore
drm
usb_common
i2c_core
thermal
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: db000000-dc0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if
00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:212e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at df00a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1ac3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de600000-deffffff
Prefetchable memory behind bridge: 00000000d4200000-00000000d4bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ddc00000-de5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd200000-ddbfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dc800000-dd1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT
630M] [10de:0de9] (rev ff) (prog-if ff)
!!! Unknown header type 7f
03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1]
(rev 73)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB
Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 005: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card
Reader Controller
Bus 003 Device 004: ID 13d3:5710 IMC Networks UVC VGA Webcam
Bus 003 Device 008: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (100, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-1-amd64/postinst/depmod-error-initrd-3.16-1-amd64: false
linux-image-3.16-1-amd64/prerm/removing-running-kernel-3.16-1-amd64: true
linux-image-3.16-1-amd64/postinst/mips-initrd-3.16-1-amd64:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
