Your message dated Sun, 25 Apr 2021 12:01:06 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #764703,
regarding linux-image-3.16-2-amd64: simple-scan (and maybe colord) hung (D)
when a HP F2280 scanner is on / standby
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
764703: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=764703
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.16.3-2
Severity: normal
Dear Maintainer,
The computer is a desktop with KDE and an HP Deskjet F2280 printer /
scanner. It upgraded a while ago to Jessie. I believe that the scanner
was not used for quite some time. While this is a KDE system, GNOME's
simple-scan is used for scanning. The system also has a webcam.
Recently the user noticed that scanning may leave a hung simple-scan
window. Digging further I noticed that even if I try to kill them they
are left zombies (Z) and there are several processes on the system in
D state.
One scenario is starting simple-scan when the scanner is on, turning it
off and then trying to scan. This seems to cause colord-sane to hang:
$ ps aux | grep ' [D]'
colord 4871 0.0 0.4 261804 9292 ? Dl 12:45 0:00
/usr/lib/colord/colord-sane
Turning the scanner back on (after a very long time) released the process.
However if I start the scanner while simple-scan is running, I get the
following two processes hung:
$ ps aux | grep ' [D]'
lp 7003 0.1 0.9 126484 19236 ? D 14:25 0:00
/usr/bin/python /usr/lib/cups/backend/hpfax
lp 7004 0.0 0.1 36160 3068 ? D 14:25 0:00 hp
The trace I get from the kernel for the location of the task is the
same as the one below for colord-sane.
Powering the scanner on again while simple-scan is running may produce
another pair of D state hp and hpfax processes.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 ([email protected]) (gcc version 4.8.3
(Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64
root=UUID=415906d6-2b68-474b-b4b8-efd7690f3f59 ro quiet
** Not tainted
** Kernel log:
[ 1200.092116] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1200.092122] Call Trace:
[ 1200.092149] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1200.092154] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1200.092163] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1200.092171] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1200.092177] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1200.092182] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1200.092187] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1320.092126] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1320.092135] Not tainted 3.16-2-amd64 #1
[ 1320.092137] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[ 1320.092140] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1320.092147] ffff88003b3953f0 0000000000000086 0000000000014240
ffff88003b2e3fd8
[ 1320.092151] 0000000000014240 ffff88003b3953f0 ffffffffa015a040
ffff88003b2e3e78
[ 1320.092155] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1320.092159] Call Trace:
[ 1320.092204] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1320.092209] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1320.092216] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1320.092222] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1320.092232] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1320.092235] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1320.092238] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1440.092107] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1440.092116] Not tainted 3.16-2-amd64 #1
[ 1440.092119] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[ 1440.092122] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1440.092129] ffff88003b3953f0 0000000000000086 0000000000014240
ffff88003b2e3fd8
[ 1440.092135] 0000000000014240 ffff88003b3953f0 ffffffffa015a040
ffff88003b2e3e78
[ 1440.092139] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1440.092145] Call Trace:
[ 1440.092173] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1440.092178] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1440.092187] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1440.092195] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1440.092201] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1440.092205] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1440.092210] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1560.092085] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1560.092092] Not tainted 3.16-2-amd64 #1
[ 1560.092095] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[ 1560.092098] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1560.092105] ffff88003b3953f0 0000000000000086 0000000000014240
ffff88003b2e3fd8
[ 1560.092111] 0000000000014240 ffff88003b3953f0 ffffffffa015a040
ffff88003b2e3e78
[ 1560.092115] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1560.092121] Call Trace:
[ 1560.092148] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1560.092154] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1560.092162] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1560.092170] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1560.092176] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1560.092181] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1560.092186] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1572.937894] perf interrupt took too long (5054 > 5000), lowering
kernel.perf_event_max_sample_rate to 25000
[ 1680.092085] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1680.092094] Not tainted 3.16-2-amd64 #1
[ 1680.092096] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[ 1680.092100] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1680.092107] ffff88003b3953f0 0000000000000086 0000000000014240
ffff88003b2e3fd8
[ 1680.092113] 0000000000014240 ffff88003b3953f0 ffffffffa015a040
ffff88003b2e3e78
[ 1680.092117] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1680.092123] Call Trace:
[ 1680.092149] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1680.092155] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1680.092163] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1680.092172] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1680.092178] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1680.092182] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1680.092187] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1800.092099] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1800.092108] Not tainted 3.16-2-amd64 #1
[ 1800.092111] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[ 1800.092114] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1800.092121] ffff88003b3953f0 0000000000000086 0000000000014240
ffff88003b2e3fd8
[ 1800.092127] 0000000000014240 ffff88003b3953f0 ffffffffa015a040
ffff88003b2e3e78
[ 1800.092131] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1800.092137] Call Trace:
[ 1800.092165] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1800.092171] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1800.092179] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1800.092187] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1800.092193] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1800.092198] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1800.092203] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
[ 1920.092083] INFO: task colord-sane:4871 blocked for more than 120 seconds.
[ 1920.092091] Not tainted 3.16-2-amd64 #1
[ 1920.092094] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[ 1920.092097] colord-sane D ffff88003b395848 0 4871 1235 0x00000000
[ 1920.092104] ffff88003b3953f0 0000000000000086 0000000000014240
ffff88003b2e3fd8
[ 1920.092110] 0000000000014240 ffff88003b3953f0 ffffffffa015a040
ffff88003b2e3e78
[ 1920.092115] ffffffffa015a044 ffff88003b3953f0 00000000ffffffff
ffffffffa015a048
[ 1920.092120] Call Trace:
[ 1920.092146] [<ffffffff81508e35>] ? schedule_preempt_disabled+0x25/0x70
[ 1920.092152] [<ffffffff8150a8f3>] ? __mutex_lock_slowpath+0xd3/0x1c0
[ 1920.092160] [<ffffffff8150a9fb>] ? mutex_lock+0x1b/0x2a
[ 1920.092168] [<ffffffffa0157387>] ? pp_ioctl+0x27/0x970 [ppdev]
[ 1920.092174] [<ffffffff811b750f>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1920.092179] [<ffffffff811b7771>] ? SyS_ioctl+0x81/0xa0
[ 1920.092184] [<ffffffff8150c26d>] ? system_call_fast_compare_end+0x10/0x15
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0505
board_vendor: ASUSTeK Computer INC.
board_name: P5G41C-M LX
board_version: Rev X.0x
** Loaded modules:
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
usblp
binfmt_misc
cfg80211
rfkill
uvcvideo
snd_usb_audio
videobuf2_vmalloc
videobuf2_memops
snd_usbmidi_lib
videobuf2_core
snd_rawmidi
v4l2_common
videodev
snd_seq_device
joydev
hid_generic
media
usbhid
hid
coretemp
evdev
kvm_intel
kvm
iTCO_wdt
iTCO_vendor_support
i915
snd_hda_codec_via
snd_hda_codec_generic
psmouse
pcspkr
serio_raw
snd_hda_intel
video
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
lpc_ich
snd_timer
drm_kms_helper
mfd_core
drm
snd
shpchp
soundcore
rng_core
i2c_algo_bit
i2c_core
asus_atk0110
button
acpi_cpufreq
processor
thermal_sys
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
sg
sr_mod
cdrom
crct10dif_common
ata_generic
ata_piix
libata
scsi_mod
r8169
mii
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 20:cf:30:85:82:0c brd ff:ff:ff:ff:ff:ff
inet 192.168.0.100/24 brd 192.168.0.255 scope global dynamic eth0
valid_lft 4808sec preferred_lft 4808sec
inet6 fe80::22cf:30ff:fe85:820c/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 4311173 12314 0 0 0 0 0 0 2885812
9186 0 0 0 0 0 0
lo: 18720 111 0 0 0 0 0 0 18720
111 0 0 0 0 0 0
*** Protocol statistics:
Ip:
12625 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
12580 incoming packets delivered
8912 requests sent out
4 dropped because of missing route
Icmp:
3 ICMP messages received
3 input ICMP message failed.
ICMP input histogram:
destination unreachable: 3
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 3
Tcp:
178 active connections openings
619 passive connection openings
30 failed connection attempts
2 connection resets received
2 connections established
6367 segments received
6322 segments send out
41 segments retransmited
3 bad segments received.
63 resets sent
Udp:
5985 packets received
0 packets to unknown port received.
0 packet receive errors
2518 packets sent
UdpLite:
TcpExt:
667 TCP sockets finished time wait in fast timer
87 delayed acks sent
Quick ack mode was activated 2 times
1610 packet headers predicted
1757 acknowledgments not containing data payload received
258 predicted acknowledgments
5 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
9 fast retransmits
3 forward retransmits
3 other TCP timeouts
TCPLossProbes: 20
TCPLossProbeRecovery: 12
2 DSACKs sent for old packets
1 DSACKs received
8 connections reset due to unexpected data
2 connections reset due to early user close
TCPSackShiftFallback: 16
TCPRcvCoalesce: 182
TCPOFOQueue: 65
TCPChallengeACK: 3
TCPSYNChallenge: 3
TCPAutoCorking: 597
TCPSynRetrans: 9
TCPOrigDataSent: 2308
IpExt:
InMcastPkts: 5745
OutMcastPkts: 426
InBcastPkts: 99
OutBcastPkts: 48
InOctets: 4172116
OutOctets: 2722944
InMcastOctets: 1458568
OutMcastOctets: 67107
InBcastOctets: 9034
OutBcastOctets: 2352
InNoECTPkts: 12667
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e30] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:836d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e32] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:836d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8415]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 014: ID 1c4f:0034 SiGma Micro
Bus 003 Device 005: ID 045e:0779 Microsoft Corp. LifeCam HD-3000
Bus 003 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 003 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=he_IL.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
