Your message dated Wed, 28 Apr 2021 18:24:37 +0200 with message-id <[email protected]> and subject line Closing this bug has caused the Debian Bug report #724787, regarding linux: CPU scaling: higher frequencies and sometimes even "performance" after s2ram to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 724787: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=724787 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 3.10.11-1 Severity: important File: linux Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** -- Package-specific info: ** Version: Linux version 3.10-3-amd64 ([email protected]) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10) ** Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda3 ro quiet ** Not tainted ** Kernel log: [ 1155.524559] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1155.527013] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1155.527016] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1155.527019] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1155.528204] ata2.00: configured for UDMA/133 [ 1155.543358] sd 1:0:0:0: [sdb] Starting disk [ 1155.565351] PM: resume of devices complete after 9641.930 msecs [ 1155.565488] PM: Finishing wakeup. [ 1155.565489] Restarting tasks ... done. [ 1155.566134] video LNXVIDEO:00: Restoring backlight state [ 1416.437695] PM: Syncing filesystems ... done. [ 1416.438090] PM: Preparing system for mem sleep [ 1416.438187] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1416.452452] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1416.468442] PM: Entering mem sleep [ 1416.468496] Suspending console(s) (use no_console_suspend to debug) [ 1416.469921] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 1416.469977] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1416.470044] sd 0:0:0:0: [sda] Stopping disk [ 1416.470070] sd 1:0:0:0: [sdb] Stopping disk [ 1416.470080] serial 00:08: disabled [ 1416.470083] serial 00:08: System wakeup disabled by ACPI [ 1416.470201] mei_me 0000:00:16.0: suspend [ 1417.148132] PM: suspend of devices complete after 679.950 msecs [ 1417.148223] PM: late suspend of devices complete after 0.089 msecs [ 1417.148393] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 1417.164064] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 1417.180030] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 1417.212011] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1417.228007] PM: noirq suspend of devices complete after 79.829 msecs [ 1417.228245] ACPI: Preparing to enter system sleep state S3 [ 1417.228468] PM: Saving platform NVS memory [ 1417.229022] Disabling non-boot CPUs ... [ 1417.331890] smpboot: CPU 1 is now offline [ 1417.435829] smpboot: CPU 2 is now offline [ 1417.437219] smpboot: CPU 3 is now offline [ 1417.438332] ACPI: Low-level resume complete [ 1417.438372] PM: Restoring platform NVS memory [ 1417.438831] Enabling non-boot CPUs ... [ 1417.438902] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1417.452417] Intel pstate controlling: cpu 1 [ 1417.452470] CPU1 is up [ 1417.452519] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1417.466046] Intel pstate controlling: cpu 2 [ 1417.466082] CPU2 is up [ 1417.466138] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1417.479665] Intel pstate controlling: cpu 3 [ 1417.479701] CPU3 is up [ 1417.483308] ACPI: Waking up from system sleep state S3 [ 1417.513152] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1417.561123] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1417.593098] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1417.609135] PM: noirq resume of devices complete after 125.501 msecs [ 1417.609221] PM: early resume of devices complete after 0.068 msecs [ 1417.609250] i915 0000:00:02.0: setting latency timer to 64 [ 1417.609252] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1417.609280] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [ 1417.609300] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 1417.609307] e1000e 0000:00:19.0: setting latency timer to 64 [ 1417.609321] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 1417.609389] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1417.609390] ahci 0000:00:1f.2: setting latency timer to 64 [ 1417.609462] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 1417.609560] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1417.610430] serial 00:08: activated [ 1417.936837] ata6: SATA link down (SStatus 0 SControl 300) [ 1417.936855] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1417.938286] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1417.938287] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1417.938289] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1417.952828] ata5: SATA link down (SStatus 0 SControl 300) [ 1417.958278] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1417.958279] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1417.958280] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1417.960826] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1417.963109] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1417.963110] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1417.963111] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1417.967860] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1417.967861] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1417.967862] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1417.968279] ata1.00: configured for UDMA/133 [ 1417.969754] ata3.00: configured for UDMA/100 [ 1417.980997] sd 0:0:0:0: [sda] Starting disk [ 1418.972285] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 1420.904566] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 1422.981975] ata2: link is slow to respond, please be patient (ready=0) [ 1427.347420] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1427.348682] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1427.348685] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1427.348688] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1427.351133] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1427.351137] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1427.351139] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1427.352327] ata2.00: configured for UDMA/133 [ 1427.367512] sd 1:0:0:0: [sdb] Starting disk [ 1427.395450] PM: resume of devices complete after 9791.884 msecs [ 1427.395600] PM: Finishing wakeup. [ 1427.395601] Restarting tasks ... done. [ 1427.397997] video LNXVIDEO:00: Restoring backlight state ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: Intel Corp. bios_version: EBH7710H.86A.0089.2012.0809.1606 board_vendor: Intel Corporation board_name: DH77EB board_version: AAG39073-304 ** Loaded modules: binfmt_misc snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support parport_pc ppdev lp parport coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper nfsd auth_rpcgss oid_registry nfs_acl nfs lockd dns_resolver fscache sunrpc usblp microcode pcspkr snd_hda_intel snd_hda_codec evdev snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer i2c_i801 snd lpc_ich mfd_core soundcore wmi i915 mperf video button drm_kms_helper drm i2c_algo_bit processor mei_me i2c_core mei w83627ehf hwmon_vid fuse autofs4 ext4 crc16 jbd2 mbcache sg sr_mod cdrom sd_mod crc_t10dif hid_generic usbhid hid ahci libahci libata scsi_mod e1000e ptp pps_core ehci_pci xhci_hcd ehci_hcd fan thermal thermal_sys usbcore usb_common ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.0.12 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.10 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.0.10 dns-search home ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:22:4d:83:64:41 brd ff:ff:ff:ff:ff:ff inet 192.168.0.12/24 brd 192.168.0.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::222:4dff:fe83:6441/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 2666380 3253 0 0 0 0 0 0 270153 2025 0 0 0 0 0 0 lo: 16005 40 0 0 0 0 0 0 16005 40 0 0 0 0 0 0 *** Protocol statistics: Ip: 2307 total packets received 0 forwarded 0 incoming packets discarded 2307 incoming packets delivered 2002 requests sent out 8 dropped because of missing route Icmp: 1 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 1 1 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 1 IcmpMsg: InType3: 1 OutType3: 1 Tcp: 75 active connections openings 2 passive connection openings 4 failed connection attempts 14 connection resets received 0 connections established 2162 segments received 1862 segments send out 0 segments retransmited 4 bad segments received. 34 resets sent Udp: 180 packets received 0 packets to unknown port received. 0 packet receive errors 181 packets sent UdpLite: TcpExt: 18 TCP sockets finished time wait in fast timer 30 delayed acks sent 1275 packet headers predicted 139 acknowledgments not containing data payload received 3 predicted acknowledgments 3 connections reset due to unexpected data 14 connections reset due to early user close TCPRcvCoalesce: 315 TCPOFOQueue: 347 TCPChallengeACK: 4 TCPSYNChallenge: 4 IpExt: InMcastPkts: 32 OutMcastPkts: 34 InBcastPkts: 1 InOctets: 2567020 OutOctets: 230713 InMcastOctets: 4207 OutMcastOctets: 4287 InBcastOctets: 328 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) Subsystem: Intel Corporation Device [8086:2032] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2032] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Intel Corporation Device [8086:2032] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Intel Corporation Device [8086:2032] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at f7c3b000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04) Subsystem: Intel Corporation Device [8086:2032] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7c39000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:2032] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c38000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Intel Corporation Device [8086:2032] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:2032] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7c37000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller [8086:1e4a] (rev 04) Subsystem: Intel Corporation Device [8086:2032] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Intel Corporation Device [8086:2032] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at f0d0 [size=8] Region 1: I/O ports at f0c0 [size=4] Region 2: I/O ports at f0b0 [size=8] Region 3: I/O ports at f0a0 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7c36000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Intel Corporation Device [8086:2032] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7c35000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] ** USB devices: Bus 002 Device 005: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 002 Device 004: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse Bus 002 Device 003: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 046d:c404 Logitech, Inc. TrackMan Wheel Bus 001 Device 005: ID 03f0:1004 Hewlett-Packard DeskJet 970c/970cse Bus 001 Device 004: ID eb1a:51b2 eMPIA Technology, Inc. Bus 001 Device 003: ID 04a9:190a Canon, Inc. CanoScan LiDE 210 Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.10-3-amd64 depends on: pn debconf | debconf-2.0 <none> pn initramfs-tools | linux-initramfs-tool <none> pn kmod | module-init-tools <none> pn linux-base <none> Versions of packages linux-image-3.10-3-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.10-3-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | extlinux | lilo <none> pn linux-doc-3.10 <none> Versions of packages linux-image-3.10-3-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.10-3-amd64/postinst/ignoring-ramdisk: linux-image-3.10-3-amd64/postinst/missing-firmware-3.10-3-amd64: linux-image-3.10-3-amd64/postinst/depmod-error-initrd-3.10-3-amd64: false linux-image-3.10-3-amd64/prerm/removing-running-kernel-3.10-3-amd64: true Here an example with idle desktop, scaling driver "intel_pstate": cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor powersave powersave powersave powersave $ cat /proc/cpuinfo | grep -i mhz cpu MHz : 1632.000 cpu MHz : 1632.000 cpu MHz : 1666.000 cpu MHz : 1666.000 # cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1666000 1598000 1666000 1666000 Now s2ram + resume: cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor powersave powersave powersave powersave cat /proc/cpuinfo | grep -i mhz cpu MHz : 3060.000 cpu MHz : 1598.000 cpu MHz : 3366.000 cpu MHz : 1598.000 cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq 1598000 2652000 3264000 1598000 I even noticed once that after resume only core0 was on "powersave" while cpu's 1,2,3 were on "performance". This has also been reported with kernel 3.10-rcX in Gentoo: http://comments.gmane.org/gmane.linux.kernel.cpufreq/11000 and a fix/patch was published here: https://lkml.org/lkml/2013/7/11/661 /Ingo
--- End Message ---
--- Begin Message ---This bug was filed for a very old kernel. If you can reproduce it with - the current version in unstable/testing - the latest kernel from buster.backports please reopen the bug, see https://www.debian.org/Bugs/server-control
--- End Message ---
