Your message dated Sat, 01 May 2021 05:39:21 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #658759,
regarding [kirkwood] decompressor doesn't disable l2 cache (need workaround for
uboot bug#658904)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
658759: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=658759
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-3.2.0-1-kirkwood
Version: 3.2.2-1
Problem: This kernel package, when installed on many Kirkwood machines,
including the Dockstar, does not boot. Various users have noticed this,
and it seems likely that it could be related to compression of the kernel
image into the uImage file. Notably, an uncompressed vmlinux.bin (from
the same build/source) relabeled as uImage will boot correctly.
Unfortunately, the default for this package is a compressed image.
http://packages.debian.org/unstable/kernel/linux-image-3.2.0-1-kirkwood
Steps to reproduce, with output shown:
On my Dockstar:
==============================
================================
cd /
wget
http://ftp.us.debian.org/debian/pool/main/l/linux-2.6/linux-image-3.2.0-1-kirkwood_3.2.2-1_armel.deb
dpkg -i linux-image-3.2.0-1-kirkwood_3.2.2-1_armel.deb
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n
Linux-3.2.0-1-kirkwood -d /boot/vmlinuz-3.2.0-1-kirkwood /boot/uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n
initramfs-3.2.0-1-kirkwood -d /boot/initrd.img-3.2.0-1-kirkwood
/boot/uInitrd
==================================================================
>From serial connection:
==============================================================
U-Boot 2010.09 (Oct 23 2010 - 11:49:22)
Marvell-Dockstar/Pogoplug by Jeff Doozan
SoC: Kirkwood 88F6281_A0
DRAM: 128 MiB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot: 0
(Re)start
USB...
USB: Register 10011 NbrPorts
1
USB EHCI
1.00
scanning bus for devices... 4 USB Device(s)
found
scanning bus for storage devices... 1 Storage Device(s)
found
Loading file "/rescueme" from usb device 0:1
(usbda1)
** File not found
/rescueme
reading
/rescueme.txt
** Unable to read "/rescueme.txt" from usb 0:1
**
Creating 1 MTD partitions on
"nand0":
0x000002500000-0x000010000000 :
"mtd=3"
UBI: attaching mtd1 to
ubi0
UBI: physical eraseblock size: 131072 bytes (128
KiB)
UBI: logical eraseblock size: 129024
bytes
UBI: smallest flash I/O unit:
2048
UBI: sub-page size:
512
UBI: VID header offset: 512 (aligned
512)
UBI: data offset:
2048
UBI: attached mtd1 to
ubi0
UBI: MTD device name:
"mtd=3"
UBI: MTD device size: 219
MiB
UBI: number of good PEBs:
1752
UBI: number of bad PEBs:
0
UBI: max. allowed volumes:
128
UBI: wear-leveling threshold:
4096
UBI: number of internal volumes:
1
UBI: number of user volumes:
0
UBI: available PEBs:
1731
UBI: total number of reserved PEBs:
21
UBI: number of PEBs reserved for bad PEB handling:
17
UBI: max/mean erase counter:
1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error
-19
Error reading superblock on volume
'ubi:rootfs'!
Loading file "/boot/uImage" from usb device 0:1
(usbda1)
1 bytes
read
Found bootable drive on usb
0:1
Loading file "/boot/uImage" from usb device 0:1
(usbda1)
1570456 bytes
read
Loading file "/boot/uInitrd" from usb device 0:1
(usbda1)
6621782 bytes
read
## Booting kernel from Legacy Image at 00800000
...
Image Name:
Linux-3.2.0-1-kirkwood
Image Type: ARM Linux Kernel Image
(uncompressed)
Data Size: 1570392 Bytes = 1.5
MiB
Load Address:
00008000
Entry Point:
00008000
Verifying Checksum ...
OK
## Loading init Ramdisk from Legacy Image at 01100000
...
Image Name:
initramfs-3.2.0-1-kirkwood
Image Type: ARM Linux RAMDisk Image (gzip
compressed)
Data Size: 6621718 Bytes = 6.3
MiB
Load Address:
00000000
Entry Point:
00000000
Verifying Checksum ...
OK
Loading Kernel Image ...
OK
OK
Starting kernel
...
Uncompressing Linux... done, booting the kernel.
=================================================================
No further output is seen.
I am using Debian GNU/Linux 6/Wheezy. The same behavior shows up with
Squeeze.
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
