Your message dated Sat, 01 May 2021 05:53:02 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #664767,
regarding brcmsmac wireless brcms_c_wait_for_tx_completion warning
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
664767: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=664767
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-2.6
Version: 3.2.17-1
Severity: normal
Samsung X125 laptop. This kind of warning was logged. Also earlier 3.2.x
kernels do this.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.17-1)
([email protected]) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP
Sun May 13 07:51:23 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae
root=UUID=8d1825b0-128e-48b9-b21d-c189ccdf9506 ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 4.561024] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.568751] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 4.574151] radeon 0000:01:05.0: WB enabled
[ 4.611273] [drm] ring test succeeded in 0 usecs
[ 4.611412] [drm] radeon: ib pool ready.
[ 4.611501] [drm] ib test succeeded in 0 usecs
[ 4.614899] [drm] Radeon Display Connectors
[ 4.614903] [drm] Connector 0:
[ 4.614905] [drm] LVDS
[ 4.614909] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 4.614911] [drm] Encoders:
[ 4.614913] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 4.614915] [drm] Connector 1:
[ 4.614917] [drm] VGA
[ 4.614920] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 4.614922] [drm] Encoders:
[ 4.614924] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.614926] [drm] Connector 2:
[ 4.614928] [drm] HDMI-A
[ 4.614929] [drm] HPD1
[ 4.614932] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c
0x7e6c
[ 4.614934] [drm] Encoders:
[ 4.614936] [drm] DFP1: INTERNAL_UNIPHY
[ 4.615068] [drm] radeon: power management initialized
[ 5.197346] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 5.239840] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input10
[ 5.650317] [drm] fb mappable at 0xC0142000
[ 5.650321] [drm] vram apper at 0xC0000000
[ 5.650324] [drm] size 4325376
[ 5.650326] [drm] fb depth is 24
[ 5.650328] [drm] pitch is 5632
[ 5.650478] fbcon: radeondrmfb (fb0) is primary device
[ 5.731785] Console: switching to colour frame buffer device 170x48
[ 5.747596] fb0: radeondrmfb frame buffer device
[ 5.747599] drm: registered panic notifier
[ 5.747677] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on
minor 0
[ 5.952706] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 6.019072] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 6.069379] loop: module loaded
[ 6.830368] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[ 7.125166] fuse init (API version 7.17)
[ 8.057107] powernow-k8: Found 1 AMD Athlon(tm) II Neo K125 Processor (1 cpu
cores) (version 2.20.00)
[ 8.057155] powernow-k8: 0 : pstate 0 (1700 MHz)
[ 8.057158] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 8.057161] powernow-k8: 2 : pstate 2 (800 MHz)
[ 8.214473] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.214482] Bluetooth: BNEP filters: protocol multicast
[ 8.243742] Bluetooth: RFCOMM TTY layer initialized
[ 8.243755] Bluetooth: RFCOMM socket layer initialized
[ 8.243761] Bluetooth: RFCOMM ver 1.11
[ 8.250949] Bridge firewalling registered
[ 9.518051] ieee80211 phy0: brcms_ops_config: change monitor mode: false
(implement)
[ 9.522516] ieee80211 phy0: brcms_ops_config: change power-save mode: false
(implement)
[ 9.527546] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 9.532333] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.538671] sky2 0000:03:00.0: eth0: enabling interface
[ 9.538958] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 410.536349] wlan0: authenticate with 00:24:a5:da:fa:e8 (try 1)
[ 410.540145] wlan0: authenticated
[ 410.540189] wlan0: associate with 00:24:a5:da:fa:e8 (try 1)
[ 410.543376] wlan0: RX AssocResp from 00:24:a5:da:fa:e8 (capab=0x411 status=0
aid=1)
[ 410.543382] wlan0: associated
[ 410.543990] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true
(implement)
[ 410.544024] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 410.544031] ieee80211 phy0: changing basic rates failed: -22
[ 410.544036] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 0 (implement)
[ 410.544322] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 410.618222] Intel AES-NI instructions are not detected.
[ 414.731944] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 1 (implement)
[ 420.912148] wlan0: no IPv6 routers present
[ 1210.372008] ------------[ cut here ]------------
[ 1210.372039] WARNING: at
/build/buildd-linux-2.6_3.2.17-1-i386-rPdRhH/linux-2.6-3.2.17/debian/build/source_i386_none/drivers/net/wireless/brcm80211/brcmsmac/main.c:8241
brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]()
[ 1210.372046] Hardware name: X125
[ 1210.372049] Modules linked in: cryptd aes_i586 aes_generic bridge stp rfcomm
bnep powernow_k8 mperf cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse loop joydev tpm_tis tpm tpm_bios arc4 radeon psmouse
brcmsmac serio_raw btusb mac80211 brcmutil pcspkr samsung_laptop evdev ttm
drm_kms_helper uvcvideo drm videodev sp5100_tco media ac processor
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm snd_seq snd_timer snd_seq_device i2c_algo_bit snd soundcore k10temp
video cfg80211 crc8 i2c_piix4 battery power_supply bluetooth button i2c_core
rfkill snd_page_alloc cordic shpchp ext4 mbcache jbd2 crc16 sd_mod crc_t10dif
usb_storage uas ohci_hcd ahci libahci ehci_hcd libata scsi_mod thermal
thermal_sys sky2 usbcore usb_common [last unloaded: scsi_wait_scan]
[ 1210.372139] Pid: 1659, comm: wpa_supplicant Not tainted 3.2.0-2-686-pae #1
[ 1210.372143] Call Trace:
[ 1210.372153] [<c103845c>] ? warn_slowpath_common+0x68/0x79
[ 1210.372172] [<f8706e1e>] ? brcms_c_wait_for_tx_completion+0x73/0x7d
[brcmsmac]
[ 1210.372178] [<c103847a>] ? warn_slowpath_null+0xd/0x10
[ 1210.372195] [<f8706e1e>] ? brcms_c_wait_for_tx_completion+0x73/0x7d
[brcmsmac]
[ 1210.372210] [<f86fe10f>] ? brcms_ops_flush+0x1f/0x29 [brcmsmac]
[ 1210.372227] [<f86586e4>] ? __ieee80211_start_scan+0x164/0x1cb [mac80211]
[ 1210.372242] [<f8658e7d>] ? ieee80211_request_scan+0x22/0x3a [mac80211]
[ 1210.372258] [<f83e3cfc>] ? cfg80211_wext_siwscan+0x246/0x292 [cfg80211]
[ 1210.372266] [<c12a591f>] ? ioctl_standard_call+0x230/0x2d6
[ 1210.372280] [<f83e3ab6>] ? cfg80211_unlock_rdev+0x15/0x15 [cfg80211]
[ 1210.372287] [<c121da06>] ? dev_name_hash.isra.66+0x14/0x45
[ 1210.372291] [<c121da06>] ? dev_name_hash.isra.66+0x14/0x45
[ 1210.372297] [<c12a5a69>] ? wext_handle_ioctl+0xa4/0x17f
[ 1210.372310] [<f83e3ab6>] ? cfg80211_unlock_rdev+0x15/0x15 [cfg80211]
[ 1210.372316] [<c1220c3a>] ? dev_ioctl+0x555/0x58a
[ 1210.372323] [<c10f1c67>] ? fsnotify+0x1d1/0x1e8
[ 1210.372329] [<c10cb912>] ? fsnotify_modify+0x48/0x4f
[ 1210.372335] [<c1210ae9>] ? might_fault+0x5/0x5
[ 1210.372340] [<c10d795f>] ? do_vfs_ioctl+0x459/0x48f
[ 1210.372346] [<c100f9e7>] ? read_tsc+0xa/0x28
[ 1210.372353] [<c1053739>] ? timekeeping_get_ns+0x11/0x55
[ 1210.372358] [<c10d79d9>] ? sys_ioctl+0x44/0x67
[ 1210.372364] [<c12c565f>] ? sysenter_do_call+0x12/0x28
[ 1210.372368] ---[ end trace 0bc80ecc3c064a4f ]---
** Model information
not available
** Loaded modules:
cryptd
aes_i586
aes_generic
bridge
stp
rfcomm
bnep
powernow_k8
mperf
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
fuse
loop
joydev
tpm_tis
tpm
tpm_bios
arc4
radeon
psmouse
brcmsmac
serio_raw
btusb
mac80211
brcmutil
pcspkr
samsung_laptop
evdev
ttm
drm_kms_helper
uvcvideo
drm
videodev
sp5100_tco
media
ac
processor
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_seq
snd_timer
snd_seq_device
i2c_algo_bit
snd
soundcore
k10temp
video
cfg80211
crc8
i2c_piix4
battery
power_supply
bluetooth
button
i2c_core
rfkill
snd_page_alloc
cordic
shpchp
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
usb_storage
uas
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
thermal
thermal_sys
sky2
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:24:54:cc:53:99 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether e8:39:df:9e:43:d5 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.154/24 brd 192.168.100.255 scope global wlan0
inet6 fe80::ea39:dfff:fe9e:43d5/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether f2:eb:ac:ef:95:d4 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 174220 1456 0 0 0 0 0 0 174220
1456 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 25089559 20441 0 0 0 0 0 0 1173329
12426 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
20845 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
20034 incoming packets delivered
13209 requests sent out
80 outgoing packets dropped
Icmp:
91 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 88
echo replies: 3
91 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 88
echo request: 3
IcmpMsg:
InType0: 3
InType3: 88
OutType3: 88
OutType8: 3
Tcp:
253 active connections openings
89 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
18549 segments received
12201 segments send out
8 segments retransmited
0 bad segments received.
8 resets sent
Udp:
783 packets received
88 packets to unknown port received.
0 packet receive errors
907 packets sent
UdpLite:
TcpExt:
3 packets pruned from receive queue because of socket buffer overrun
95 TCP sockets finished time wait in fast timer
137 delayed acks sent
Quick ack mode was activated 1 times
1 packets directly queued to recvmsg prequeue.
1 bytes directly received in process context from prequeue
15204 packet headers predicted
529 acknowledgments not containing data payload received
423 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
4 other TCP timeouts
104 packets collapsed in receive queue due to low socket buffer
1 DSACKs sent for old packets
2 connections reset due to unexpected data
1 connections aborted due to timeout
IpExt:
InMcastPkts: 27
OutMcastPkts: 12
InBcastPkts: 523
InOctets: 24938190
OutOctets: 901143
InMcastOctets: 6508
OutMcastOctets: 2701
InBcastOctets: 81186
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Samsung Electronics Co Ltd Device [144d:9602]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0000000-d01fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0200000-d02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0300000-d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8430 [size=4]
Region 2: I/O ports at 8420 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at d0608c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0608000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0608400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383] (rev 40)
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller
[1002:439d] (rev 40)
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0608800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility
Radeon HD 4200] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD
4200] [1002:970f]
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d0110000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E
Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0300000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a5c:219c Broadcom Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 2232:1001
Bus 002 Device 002: ID 13fe:1f23 Kingston Technology Company Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (900, 'stable-updates'), (900, 'stable'), (700, 'testing'), (600,
'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initr 0.102 generic modular initramfs generato
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-32 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.2.0-2-686-pae suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-brcm80211 0.35 Binary firmware for Broadcom 802.1
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.35 Binary firmware for various driver
ii firmware-linux-nonfree 0.35 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
