Your message dated Sun, 09 May 2021 05:26:03 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #797102,
regarding linux-image-4.0.0-1-amd64: radeon KMS display regression - monitor
blank
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
797102: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=797102
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.0.2-1
Severity: normal
Hello,
After power outage when my system rebooted my display would show just
"Input not supported" message.
This is the earliest broken kernel and this goes up to 4.2.0-rc8
Out of the kernels I have installed latest working is
linux-image-3.18.0-trunk 3.18.5-1~exp1
The monitor is connected over displayport and works in 1920x1080 but not
the native 2560x1440 resolution.
This is probably upstream problem.
RADEON(0): Chipset: "ATI Radeon HD 5670" (ChipID = 0x68d8)
I guess I will just remove the newer kernels.
Thanks
Michal
-- Package-specific info:
** Version:
Linux version 4.0.0-1-amd64 ([email protected]) (gcc version 4.9.2
(Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64
root=UUID=c24506ba-3af2-456e-a23c-53fa182a57bf ro
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 13.257388] uvd vclk: 0 dclk: 0
[ 13.257388] power level 0 sclk: 15700 mclk: 30000 vddc: 1000
vddci: 0
[ 13.257389] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 13.257389] power level 2 sclk: 77500 mclk: 100000 vddc: 1100
vddci: 0
[ 13.257390] status: c
[ 13.257390] switching to power state:
[ 13.257391] ui class: performance
[ 13.257391] internal class: none
[ 13.257392] caps: video
[ 13.257392] uvd vclk: 0 dclk: 0
[ 13.257393] power level 0 sclk: 40000 mclk: 100000 vddc: 1100
vddci: 0
[ 13.257393] power level 1 sclk: 40000 mclk: 100000 vddc: 1100
vddci: 0
[ 13.257394] power level 2 sclk: 77500 mclk: 100000 vddc: 1100
vddci: 0
[ 13.257394] status: r
[ 13.361638] Console: switching to colour frame buffer device 160x64
[ 13.365439] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.365442] radeon 0000:01:00.0: registered panic notifier
[ 13.376066] [drm] Initialized radeon 2.41.0 20080528 for 0000:01:00.0 on
minor 0
[ 13.763407] usbcore: registered new interface driver usbserial
[ 13.763426] usbcore: registered new interface driver usbserial_generic
[ 13.763442] usbserial: USB Serial support registered for generic
[ 13.766615] usbcore: registered new interface driver pl2303
[ 13.766634] usbserial: USB Serial support registered for pl2303
[ 13.766660] pl2303 7-1:1.0: pl2303 converter detected
[ 13.778312] usb 7-1: pl2303 converter now attached to ttyUSB0
[ 24.558494] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts:
(null)
[ 24.577883] EXT4-fs (sdf4): mounted filesystem with ordered data mode. Opts:
(null)
[ 24.591748] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts:
(null)
[ 24.744279] tun: Universal TUN/TAP device driver, 1.6
[ 24.744282] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 24.878772] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 24.884052] device tap0 entered promiscuous mode
[ 24.886089] device tap1 entered promiscuous mode
[ 24.886939] device tap2 entered promiscuous mode
[ 24.888454] device tap3 entered promiscuous mode
[ 24.889376] tapbr: port 4(tap3) entered forwarding state
[ 24.889381] tapbr: port 4(tap3) entered forwarding state
[ 24.889383] tapbr: port 3(tap2) entered forwarding state
[ 24.889385] tapbr: port 3(tap2) entered forwarding state
[ 24.889387] tapbr: port 2(tap1) entered forwarding state
[ 24.889389] tapbr: port 2(tap1) entered forwarding state
[ 24.889391] tapbr: port 1(tap0) entered forwarding state
[ 24.889392] tapbr: port 1(tap0) entered forwarding state
[ 25.705977] Adding 5191676k swap on /scratch/build/swap. Priority:1
extents:1505 across:5583632k SSFS
[ 25.744030] tapbr: port 1(tap0) entered disabled state
[ 25.744051] tapbr: port 2(tap1) entered disabled state
[ 25.744061] tapbr: port 3(tap2) entered disabled state
[ 25.744070] tapbr: port 4(tap3) entered disabled state
[ 25.961636] iscsi: registered transport (iser)
[ 30.622880] RPC: Registered named UNIX socket transport module.
[ 30.622883] RPC: Registered udp transport module.
[ 30.622884] RPC: Registered tcp transport module.
[ 30.622884] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 30.690306] FS-Cache: Loaded
[ 30.780832] FS-Cache: Netfs 'nfs' registered for caching
[ 30.916481] systemd-journald[234]: Received request to flush runtime journal
from PID 1
[ 31.056674] Installing knfsd (copyright (C) 1996 [email protected]).
[ 31.281157] oss_hdaudio: HDA codec 0x11d41882 not known yet
[ 31.291008] oss_hdaudio: Too many connections(B) for widget 35 (24)
[ 31.296761] oss_hdaudio: HDA codec 0x11d41882 not known yet
[ 32.660947] Process accounting resumed
[ 33.998231] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 33.999047] NFSD: starting 90-second grace period (net ffffffff818c4b80)
[ 36.537890] switching from power state:
[ 36.537894] ui class: performance
[ 36.537895] internal class: none
[ 36.537896] caps: video
[ 36.537898] uvd vclk: 0 dclk: 0
[ 36.537899] power level 0 sclk: 40000 mclk: 100000 vddc: 1100
vddci: 0
[ 36.537900] power level 1 sclk: 40000 mclk: 100000 vddc: 1100
vddci: 0
[ 36.537901] power level 2 sclk: 77500 mclk: 100000 vddc: 1100
vddci: 0
[ 36.537902] status: c
[ 36.537903] switching to power state:
[ 36.537904] ui class: performance
[ 36.537905] internal class: none
[ 36.537906] caps: single_disp video
[ 36.537907] uvd vclk: 0 dclk: 0
[ 36.537908] power level 0 sclk: 15700 mclk: 30000 vddc: 1000
vddci: 0
[ 36.537909] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 36.537910] power level 2 sclk: 77500 mclk: 100000 vddc: 1100
vddci: 0
[ 36.537911] status: r
[ 38.197300] switching from power state:
[ 38.197303] ui class: performance
[ 38.197304] internal class: none
[ 38.197305] caps: single_disp video
[ 38.197307] uvd vclk: 0 dclk: 0
[ 38.197308] power level 0 sclk: 15700 mclk: 30000 vddc: 1000
vddci: 0
[ 38.197310] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 38.197311] power level 2 sclk: 77500 mclk: 100000 vddc: 1100
vddci: 0
[ 38.197311] status: c
[ 38.197313] switching to power state:
[ 38.197313] ui class: performance
[ 38.197314] internal class: none
[ 38.197315] caps: video
[ 38.197316] uvd vclk: 0 dclk: 0
[ 38.197317] power level 0 sclk: 40000 mclk: 100000 vddc: 1100
vddci: 0
[ 38.197318] power level 1 sclk: 40000 mclk: 100000 vddc: 1100
vddci: 0
[ 38.197319] power level 2 sclk: 77500 mclk: 100000 vddc: 1100
vddci: 0
[ 38.197320] status: r
[ 40.556669] avant-window-na[2341]: segfault at 0 ip 00007f31026566c0 sp
00007fff24cf47e0 error 4 in libdesktop-agnostic-cfg.so.0.4.0[7f310264a000+1d000]
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: CBQ4510H.86A.0133.2011.0810.1010
board_vendor: Intel Corporation
board_name: DQ45CB
board_version: AAE30148-302
** Loaded modules:
binfmt_misc
oss_hdaudio(O)
osscore(O)
nfsd
auth_rpcgss
nfsv2
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
ib_iser
rdma_cm
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
ib_addr
bridge
stp
llc
tun
pl2303
usbserial
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
joydev
evdev
v4l2_common
videodev
media
coretemp
kvm_intel
kvm
psmouse
serio_raw
i2c_i801
radeon
lpc_ich
mfd_core
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
loop
fuse
tpm_tis
tpm
shpchp
video
button
8250_fintek
mei_me
mei
acpi_cpufreq
processor
thermal_sys
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
hid_generic
usbhid
hid
usb_storage
sg
sd_mod
ata_piix
firewire_ohci
ahci
libahci
firewire_core
crc_itu_t
ata_generic
libata
scsi_mod
uhci_hcd
e1000e
ptp
pps_core
ehci_pci
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d0000000-e00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset
HECI Controller [8086:2e14] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at e022a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER
Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at f210 [size=8]
Region 1: I/O ports at f200 [size=4]
Region 2: I/O ports at f1f0 [size=8]
Region 3: I/O ports at f1e0 [size=4]
Region 4: I/O ports at f1d0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT
Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f1c0 [size=8]
Region 1: Memory at e0229000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e0228000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f100 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at f0e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f0c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e0220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: oss_hdaudio
00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e0226000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: e0100000-e01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller [8086:3a14] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family)
SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at f1b0 [size=8]
Region 1: I/O ports at f1a0 [size=4]
Region 2: I/O ports at f190 [size=8]
Region 3: I/O ports at f180 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at e0225000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0224000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family)
2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f170 [size=8]
Region 1: I/O ports at f160 [size=4]
Region 2: I/O ports at f150 [size=8]
Region 3: I/O ports at f140 [size=4]
Region 4: I/O ports at f130 [size=16]
Region 5: I/O ports at f120 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Redwood XT [Radeon HD 5670/5690/5730] [1002:68d8] (prog-if 00 [VGA
controller])
Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 5670
[174b:e151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e0020000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood
HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aa60]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e0040000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:01.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a
Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e0101000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at e0100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 002 Device 008: ID 05e3:0741 Genesys Logic, Inc.
Bus 002 Device 007: ID 047d:2048 Kensington Orbit Trackball with Scroll Ring
Bus 002 Device 006: ID 05e3:0736 Genesys Logic, Inc. microSD Reader/Writer
Bus 002 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 003: ID 090c:6200 Silicon Motion, Inc. - Taiwan (formerly Feiya
Technology Corp.) microSD card reader
Bus 001 Device 002: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD
card reader)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'oldstable'), (171, 'unstable'), (151,
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, armhf
Kernel: Linux 4.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-4.0.0-1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.0.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-5
ii grub-pc 2.02~beta2-22
pn linux-doc-4.0 <none>
Versions of packages linux-image-4.0.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.0.0-1-amd64/postinst/depmod-error-initrd-4.0.0-1-amd64: false
linux-image-4.0.0-1-amd64/prerm/removing-running-kernel-4.0.0-1-amd64: true
linux-image-4.0.0-1-amd64/postinst/mips-initrd-4.0.0-1-amd64:
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
