--- Begin Message ---
Package: src:linux
Version: 3.16.43-2+deb8u5
Severity: important(fixed-upstream)
Dear Maintainer,
I'm using Debian 8 and 9 stable releases with kernel-image-686-pae.
I have a board with the Fintek F81866 SuperIO chipset; serial ports
/dev/ttyS0 and /dev/ttyS1 work properly, but /dev/ttyS2 and /dev/ttyS3
don't.
Looking at the source code I found that probably the current kernel(on
Debian 9 and 8) lacks of specific support for Fintek F81866 (file:
8250_fintek.c).
I tried with Debian testing and serial ports all work properly.
On current mainline kernel source(file: 8250_fintek.c) I can see that
there is a specific support for F81866.
Is it possible to support it on next stable kernel patch ?
Thanks in advance.
Best regards
-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae ([email protected]) (gcc
version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae
root=UUID=b757d483-0e39-49af-ad10-aad5401fbec3 ro
initrd=/install/initrd.gz quiet splash vt.global_cursor_default=0
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 9.639992] systemd[1]: Listening on Delayed Shutdown Socket.
[ 9.640028] systemd[1]: Starting Journal Socket (/dev/log).
[ 9.640278] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.640332] systemd[1]: Starting udev Control Socket.
[ 9.640503] systemd[1]: Listening on udev Control Socket.
[ 9.640553] systemd[1]: Starting udev Kernel Socket.
[ 9.640708] systemd[1]: Listening on udev Kernel Socket.
[ 9.640752] systemd[1]: Starting Journal Socket.
[ 9.640962] systemd[1]: Listening on Journal Socket.
[ 9.641021] systemd[1]: Starting System Slice.
[ 9.641228] systemd[1]: Created slice System Slice.
[ 9.641269] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 9.641515] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.641565] systemd[1]: Started File System Check on Root Device.
[ 9.641597] systemd[1]: Starting system-getty.slice.
[ 9.641823] systemd[1]: Created slice system-getty.slice.
[ 9.641894] systemd[1]: Starting Increase datagram queue length...
[ 9.643094] systemd[1]: Mounting Debug File System...
[ 9.644167] systemd[1]: Starting udev Coldplug all Devices...
[ 9.654304] systemd[1]: Starting Load Kernel Modules...
[ 9.657715] systemd[1]: Started Set Up Additional Binary Formats.
[ 9.657766] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.658534] systemd[1]: Mounting Huge Pages File System...
[ 9.659468] systemd[1]: Starting Create list of required static
device nodes for the current kernel...
[ 9.660331] systemd[1]: Starting Slices.
[ 9.660431] systemd[1]: Reached target Slices.
[ 9.672512] fuse init (API version 7.23)
[ 9.673081] systemd[1]: Started Create list of required static device
nodes for the current kernel.
[ 9.673576] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.675213] systemd[1]: Started Load Kernel Modules.
[ 9.675507] systemd[1]: Starting Apply Kernel Variables...
[ 9.676427] systemd[1]: Mounted Configuration File System.
[ 9.676479] systemd[1]: Mounting FUSE Control File System...
[ 9.693168] systemd[1]: Mounted FUSE Control File System.
[ 9.693410] systemd[1]: Mounted Huge Pages File System.
[ 9.693584] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.693752] systemd[1]: Mounted Debug File System.
[ 9.694286] systemd[1]: Started Increase datagram queue length.
[ 9.695455] systemd[1]: Started udev Coldplug all Devices.
[ 9.699835] systemd[1]: Started Apply Kernel Variables.
[ 9.706503] systemd[1]: Started Create Static Device Nodes in /dev.
[ 9.731407] systemd[1]: Starting udev Kernel Device Manager...
[ 9.732449] systemd[1]: Starting Syslog Socket.
[ 9.732621] systemd[1]: Listening on Syslog Socket.
[ 9.732670] systemd[1]: Starting Journal Service...
[ 9.733739] systemd[1]: Started Journal Service.
[ 9.738314] systemd-udevd[211]: starting version 215
[ 9.862882] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.862945] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 9.886461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.906640] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.913152] alg: No test for crc32 (crc32-pclmul)
[ 9.932778] snd_hda_intel 0000:00:1b.0: irq 113 for MSI/MSI-X
[ 9.942600] input: eGalax Inc. eGalaxTouch EXC3000-0739-49.00.00 as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0EEF:C000.0001/input/input8
[ 9.945225] hid-multitouch 0003:0EEF:C000.0001:
input,hiddev0,hidraw0: USB HID v2.10 Pointer [eGalax Inc. eGalaxTouch
EXC3000-0739-49.00.00] on usb-0000:00:14.0-1.3/input0
[ 9.945671] intel_rapl: Found RAPL domain package
[ 9.945684] intel_rapl: Found RAPL domain core
[ 9.964135] ppdev: user-space parallel port driver
[ 9.966927] iTCO_vendor_support: vendor-support=0
[ 9.971817] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.971889] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3,
TCOBASE=0x0460)
[ 9.972125] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.989404] Adding 686076k swap on /dev/sda5. Priority:-1 extents:1
across:686076k SSFS
[ 9.995364] sound hdaudioC0D0: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[ 9.995371] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.995375] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.995377] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.995380] sound hdaudioC0D0: inputs:
[ 9.995384] sound hdaudioC0D0: Mic=0x19
[ 10.033806] aufs au_opts_parse:1217:mount[306]: unknown option
errors=remount-ro
[ 10.037844] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
[ 10.041437] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.041567] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.041684] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.041821] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.042568] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 10.042694] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 10.097115] systemd-journald[212]: Received request to flush runtime
journal from PID 1
[ 10.151162] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: errors=continue
[ 11.060832] random: nonblocking pool is initialized
[ 11.221917] r8169 0000:03:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168g-2.fw
[ 11.261829] r8169 0000:03:00.0 eth0: link down
[ 11.261853] r8169 0000:03:00.0 eth0: link down
[ 11.261900] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.305758] r8169 0000:07:00.0 eth1: link down
[ 11.305814] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 11.541077] RPC: Registered named UNIX socket transport module.
[ 11.541084] RPC: Registered udp transport module.
[ 11.541088] RPC: Registered tcp transport module.
[ 11.541091] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.547479] FS-Cache: Loaded
[ 11.560624] FS-Cache: Netfs 'nfs' registered for caching
[ 11.574643] Installing knfsd (copyright (C) 1996 [email protected]).
[ 13.819858] r8169 0000:03:00.0 eth0: link up
[ 13.819873] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.305137] r8169 0000:03:00.0 eth0: link down
[ 19.305147] r8169 0000:03:00.0 eth0: link down
[ 19.305195] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.863082] r8169 0000:03:00.0 eth0: link up
[ 21.863100] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
not available
** Loaded modules:
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
joydev
iTCO_wdt
iTCO_vendor_support
ppdev
intel_powerclamp
intel_rapl
coretemp
hid_multitouch
kvm_intel
snd_hda_intel
snd_hda_controller
kvm
snd_hda_codec
crc32_pclmul
snd_hwdep
serio_raw
lpc_ich
pcspkr
mfd_core
snd_pcm
snd_timer
snd
soundcore
shpchp
iosf_mbi
snd_soc_sst_acpi
parport_pc
parport
evdev
processor
battery
fuse
autofs4
aufs(C)
ext4
crc16
mbcache
jbd2
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
crc32c_intel
psmouse
i2c_i801
xhci_hcd
r8169
mii
ahci
i915
usbcore
libahci
usb_common
i2c_algo_bit
drm_kms_helper
libata
drm
scsi_mod
i2c_core
fan
thermal
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e)
Subsystem: Intel Corporation Device [8086:0f31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom
Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e)
(prog-if 00 [VGA controller])
Subsystem: Intel Corporation Atom Processor Z36xxx/Z37xxx Series
Graphics & Display [8086:0f31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 111
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 4: I/O ports at e080 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:13.0 SATA controller [0106]: Intel Corporation Device [8086:0f23]
(rev 0e) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:0f23]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 107
Region 0: I/O ports at e070 [size=8]
Region 1: I/O ports at e060 [size=4]
Region 2: I/O ports at e050 [size=8]
Region 3: I/O ports at e040 [size=4]
Region 4: I/O ports at e020 [size=32]
Region 5: Memory at 90816000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Atom Processor Z36xxx/Z37xxx Series
USB xHCI [8086:0f35]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 112
Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 113
Region 0: Memory at 90810000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:0f48] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Device [8086:0f4a] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: 90700000-907fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:0f4c] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: 90600000-906fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:0f4e] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=08, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: 90400000-905fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e)
Subsystem: Intel Corporation Atom Processor Z36xxx/Z37xxx Series
Power Control Unit [8086:0f1c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:0f12] (rev 0e)
Subsystem: Intel Corporation Device [8086:0f12]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 90814000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
02:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial
ATA Controller [1b21:0612] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASMedia Technology Inc. Device [1b21:1060]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 110
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at 90700000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168]
(rev 0c)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 108
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at 90604000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at 90600000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express
4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at 90500000 (32-bit, non-prefetchable) [size=16K]
Bus: primary=04, secondary=05, subordinate=08, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: 90400000-904fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express
4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express
4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: 90400000-904fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:03.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express
4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168]
(rev 0c)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 109
Region 0: I/O ports at b000 [size=256]
Region 2: Memory at 90404000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at 90400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0424:2530 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:4504 Standard Microsystems Corp.
Bus 001 Device 005: ID 0424:2530 Standard Microsystems Corp.
Bus 001 Device 004: ID 0eef:c000 D-WAV Scientific Co., Ltd
Bus 001 Device 002: ID 0424:4504 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.9
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.56+deb8u1
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u3
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3+deb8u1
ii libc6-i686 2.19-18+deb8u10
Versions of packages linux-image-3.16.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae:
true
linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae:
false
linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:
--
*Alessandro Carrara*
/STEP Automation/
E-mail: [email protected]
<mailto:[email protected]>
--- End Message ---
