Your message dated Sat, 29 May 2021 02:18:40 -0700 (PDT)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #919574,
regarding linux-image-4.19.0-1-amd64: "kobject_add_internal failed for
dvb0.frontend0" after suspend
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
919574: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=919574
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.19.12-1
Severity: normal
Dear Maintainer,
after the upgrade from Stretch to Buster this issue started to occur everytime
the pc resumes from suspend leading to these messages in dmesg:
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: found a 'TechnoTrend TVStick
CT2-4400' in warm state
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[Do Jan 17 11:54:26 2019] dvbdev: DVB: registering new adapter (TechnoTrend
TVStick CT2-4400)
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: MAC address: bc:ea:2b:44:0f:89
[Do Jan 17 11:54:26 2019] i2c i2c-6: Added multiplexed i2c bus 7
[Do Jan 17 11:54:26 2019] si2168 6-0064: Silicon Labs Si2168-B40 successfully
identified
[Do Jan 17 11:54:26 2019] si2168 6-0064: firmware version: B 4.0.2
[Do Jan 17 11:54:26 2019] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[Do Jan 17 11:54:26 2019] usb 1-3: DVB: registering adapter 0 frontend 0
(Silicon Labs Si2168)...
[Do Jan 17 11:54:26 2019] sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:14.0/usb1/1-3/dvb/dvb0.frontend0'
[Do Jan 17 11:54:26 2019] CPU: 3 PID: 6558 Comm: modprobe Not tainted
4.20.0-trunk-amd64 #1 Debian 4.20-1~exp1
[Do Jan 17 11:54:26 2019] Hardware name: /NUC5i3RYB, BIOS
RYBDWi35.86A.0371.2018.0709.1155 07/09/2018
[Do Jan 17 11:54:26 2019] Call Trace:
[Do Jan 17 11:54:26 2019] dump_stack+0x5c/0x80
[Do Jan 17 11:54:26 2019] sysfs_warn_dup.cold.4+0x17/0x2a
[Do Jan 17 11:54:26 2019] sysfs_create_dir_ns+0xa7/0xd0
[Do Jan 17 11:54:26 2019] kobject_add_internal+0xbc/0x270
[Do Jan 17 11:54:26 2019] kobject_add+0x7d/0xb0
[Do Jan 17 11:54:26 2019] ? refcount_inc_checked+0x5/0x30
[Do Jan 17 11:54:26 2019] device_add+0x125/0x690
[Do Jan 17 11:54:26 2019] device_create_groups_vargs+0xc1/0xf0
[Do Jan 17 11:54:26 2019] device_create+0x49/0x60
[Do Jan 17 11:54:26 2019] ? _cond_resched+0x15/0x30
[Do Jan 17 11:54:26 2019] ? kmem_cache_alloc_trace+0x155/0x1d0
[Do Jan 17 11:54:26 2019] dvb_register_device+0x230/0x2c0 [dvb_core]
[Do Jan 17 11:54:26 2019] dvb_register_frontend+0x17a/0x210 [dvb_core]
[Do Jan 17 11:54:26 2019] dvb_usbv2_probe+0x648/0x10c0 [dvb_usb_v2]
[Do Jan 17 11:54:26 2019] ? __pm_runtime_set_status+0x247/0x260
[Do Jan 17 11:54:26 2019] usb_probe_interface+0xe4/0x2f0 [usbcore]
[Do Jan 17 11:54:26 2019] really_probe+0xf8/0x3b0
[Do Jan 17 11:54:26 2019] driver_probe_device+0xb3/0xf0
[Do Jan 17 11:54:26 2019] __driver_attach+0xdd/0x110
[Do Jan 17 11:54:26 2019] ? driver_probe_device+0xf0/0xf0
[Do Jan 17 11:54:26 2019] bus_for_each_dev+0x76/0xc0
[Do Jan 17 11:54:26 2019] ? klist_add_tail+0x3b/0x70
[Do Jan 17 11:54:26 2019] bus_add_driver+0x152/0x230
[Do Jan 17 11:54:26 2019] driver_register+0x6b/0xb0
[Do Jan 17 11:54:26 2019] usb_register_driver+0x7a/0x130 [usbcore]
[Do Jan 17 11:54:26 2019] ? 0xffffffffc0687000
[Do Jan 17 11:54:26 2019] do_one_initcall+0x46/0x1c3
[Do Jan 17 11:54:26 2019] ? free_unref_page_commit+0x91/0x100
[Do Jan 17 11:54:26 2019] ? _cond_resched+0x15/0x30
[Do Jan 17 11:54:26 2019] ? kmem_cache_alloc_trace+0x155/0x1d0
[Do Jan 17 11:54:26 2019] do_init_module+0x5a/0x210
[Do Jan 17 11:54:26 2019] load_module+0x215c/0x2390
[Do Jan 17 11:54:26 2019] ? __do_sys_finit_module+0xad/0x110
[Do Jan 17 11:54:26 2019] __do_sys_finit_module+0xad/0x110
[Do Jan 17 11:54:26 2019] do_syscall_64+0x53/0x100
[Do Jan 17 11:54:26 2019] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[Do Jan 17 11:54:26 2019] RIP: 0033:0x7f594966d269
[Do Jan 17 11:54:26 2019] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00
00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05
<48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 6b 0c 00 f7 d8 64 89 01 48
[Do Jan 17 11:54:26 2019] RSP: 002b:00007ffe090df768 EFLAGS: 00000246 ORIG_RAX:
0000000000000139
[Do Jan 17 11:54:26 2019] RAX: ffffffffffffffda RBX: 0000559a8cdd9de0 RCX:
00007f594966d269
[Do Jan 17 11:54:26 2019] RDX: 0000000000000000 RSI: 0000559a8cddcc50 RDI:
0000000000000003
[Do Jan 17 11:54:26 2019] RBP: 0000559a8cddcc50 R08: 0000000000000000 R09:
0000000000000000
[Do Jan 17 11:54:26 2019] R10: 0000000000000003 R11: 0000000000000246 R12:
0000000000000000
[Do Jan 17 11:54:26 2019] R13: 0000559a8cdd9e60 R14: 0000000000040000 R15:
0000559a8cdd9de0
[Do Jan 17 11:54:26 2019] kobject_add_internal failed for dvb0.frontend0 with
-EEXIST, don't try to register things with the same name in the same directory.
[Do Jan 17 11:54:26 2019] dvbdev: dvb_register_device: failed to create device
dvb0.frontend0 (-17)
[Do Jan 17 11:54:26 2019] usb 1-3: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400'
successfully initialized and connected
[Do Jan 17 11:54:26 2019] usbcore: registered new interface driver
dvb_usb_dvbsky
[Do Jan 17 11:54:29 2019] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
[Do Jan 17 11:54:37 2019] input: Sundtek Remote Control as
/devices/virtual/input/input23
[Do Jan 17 11:54:43 2019] usb 1-4: usbfs: process 6761 (mediasrv) did not claim
interface 2 before use
The result is that the affected DVB stick doesn't work anymore. Only a reboot
"reactivates" the usb device correctly.
I installed and booted linux-image-4.20.0-trunk-amd64 but the issue remains.
Interestringly when running linux-image-4.9.0-8-amd64 the system works fine.
Best regards, Frank
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 ([email protected]) (gcc version
8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=/dev/mapper/cryptvol-rootfs ro quiet
splash kopt=root=/dev/mapper/cryptvol-rootfs
** Not tainted
** Kernel log:
[ 10.742299] systemd-journald[351]: Received request to flush runtime journal
from PID 1
[ 10.752365] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 10.752419] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.19
[ 10.752421] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.752422] usb usb3: Product: EHCI Host Controller
[ 10.752424] usb usb3: Manufacturer: Linux 4.19.0-1-amd64 ehci_hcd
[ 10.752425] usb usb3: SerialNumber: 0000:00:1d.0
[ 10.752559] hub 3-0:1.0: USB hub found
[ 10.752565] hub 3-0:1.0: 2 ports detected
[ 11.014070] nuvoton-cir 00:01: found NCT6776F or compatible: chip id: 0xc3
0x33
[ 11.046616] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 11.049348] Registered IR keymap rc-rc6-mce
[ 11.088354] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 11.090641] IR RC6 protocol handler initialized
[ 11.094519] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 11.094555] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.106928] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.116407] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as
/devices/pnp0/00:01/rc/rc0
[ 11.116479] input: Nuvoton w836x7hg Infrared Remote Transceiver as
/devices/pnp0/00:01/rc/rc0/input12
[ 11.117841] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms
ovfl timer
[ 11.117843] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.117845] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.117846] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.117847] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.118943] rc rc0: lirc_dev: driver nuvoton-cir registered at minor = 0,
raw IR receiver, no transmitter
[ 11.119426] nuvoton-cir 00:01: driver has been successfully loaded
[ 11.124286] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 11.124287] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 11.124566] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 11.216547] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC
clock
[ 11.248746] usb 3-1: New USB device found, idVendor=8087, idProduct=8001,
bcdDevice= 0.03
[ 11.248749] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.248979] hub 3-1:1.0: USB hub found
[ 11.249049] hub 3-1:1.0: 8 ports detected
[ 11.267857] iTCO_vendor_support: vendor-support=0
[ 11.272614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.272667] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2,
TCOBASE=0x1860)
[ 11.278698] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.307706] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
b8:ae:ed:72:db:9c
[ 11.307710] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 11.307745] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 11.335746] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 11.462622] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 11.522972] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 11.524362] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 11.525919] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 11.526511] input: HDA Intel HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 11.526617] input: HDA Intel HDMI HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 11.527106] snd_hda_intel 0000:00:03.0: device 8086:2057 is on the
power_save blacklist, forcing power_save to 0
[ 11.535994] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283:
line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 11.535998] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 11.536001] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 11.536004] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 11.536006] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 11.536008] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 11.585612] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 11.586703] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 11.586837] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 11.586970] snd_hda_intel 0000:00:1b.0: device 8086:2057 is on the
power_save blacklist, forcing power_save to 0
[ 11.604375] usb 1-3: dvb_usb_v2: found a 'TechnoTrend TVStick CT2-4400' in
warm state
[ 11.604430] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport
stream to the software demuxer
[ 11.604439] dvbdev: DVB: registering new adapter (TechnoTrend TVStick
CT2-4400)
[ 11.605635] usb 1-3: dvb_usb_v2: MAC address: bc:ea:2b:44:0f:89
[ 11.661403] Adding 4194300k swap on /dev/mapper/cryptvol-swap. Priority:-2
extents:1 across:4194300k FS
[ 11.666185] i2c i2c-6: Added multiplexed i2c bus 7
[ 11.666189] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified
[ 11.666191] si2168 6-0064: firmware version: B 4.0.2
[ 11.693925] media: Linux media interface: v0.10
[ 11.700504] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully
attached
[ 11.700527] usb 1-3: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[ 11.700882] usb 1-3: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400' successfully
initialized and connected
[ 11.700926] usbcore: registered new interface driver dvb_usb_dvbsky
[ 11.715564] intel_rapl: Found RAPL domain package
[ 11.715567] intel_rapl: Found RAPL domain core
[ 11.715568] intel_rapl: Found RAPL domain uncore
[ 11.715570] intel_rapl: Found RAPL domain dram
[ 11.906952] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 12.021363] audit: type=1400 audit(1547726647.690:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=551 comm="apparmor_parser"
[ 12.027144] audit: type=1400 audit(1547726647.694:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=552 comm="apparmor_parser"
[ 12.031256] audit: type=1400 audit(1547726647.698:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=548
comm="apparmor_parser"
[ 12.031262] audit: type=1400 audit(1547726647.698:5): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium"
pid=548 comm="apparmor_parser"
[ 12.031991] audit: type=1400 audit(1547726647.698:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=553 comm="apparmor_parser"
[ 12.045566] audit: type=1400 audit(1547726647.714:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice"
pid=549 comm="apparmor_parser"
[ 12.045570] audit: type=1400 audit(1547726647.714:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg"
pid=549 comm="apparmor_parser"
[ 12.048372] audit: type=1400 audit(1547726647.718:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=550
comm="apparmor_parser"
[ 12.048379] audit: type=1400 audit(1547726647.718:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=550
comm="apparmor_parser"
[ 12.048383] audit: type=1400 audit(1547726647.718:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=550
comm="apparmor_parser"
[ 12.280707] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 14.926496] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 14.926540] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 18.476641] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 18.492507] NFSD: starting 45-second grace period (net f00000a8)
[ 18.793888] input: Sundtek Remote Control as /devices/virtual/input/input22
[ 21.905057] fuse init (API version 7.27)
[ 22.642166] si2168 6-0064: firmware: direct-loading firmware
dvb-demod-si2168-b40-01.fw
[ 22.642171] si2168 6-0064: downloading firmware from file
'dvb-demod-si2168-b40-01.fw'
[ 23.318322] si2168 6-0064: firmware version: B 4.0.11
[ 23.331114] si2157 7-0060: found a 'Silicon Labs Si2157-A30'
[ 23.357008] si2157 7-0060: firmware version: 3.0.5
[ 84.131487] usb 1-4: usbfs: process 851 (mediasrv) did not claim interface 2
before use
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corporation
bios_version: RYBDWi35.86A.0371.2018.0709.1155
board_vendor: Intel Corporation
board_name: NUC5i3RYB
board_version: H41000-502
** Loaded modules:
fuse
uinput
binfmt_misc
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
si2157
coretemp
media
kvm_intel
si2168
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
kvm
snd_hda_intel
snd_hda_codec
irqbypass
snd_hda_core
dvb_usb_dvbsky
dvb_usb_v2
snd_hwdep
m88ds3103
snd_pcm
crct10dif_pclmul
i2c_mux
crc32_pclmul
dvb_core
snd_timer
snd
iTCO_wdt
ghash_clmulni_intel
iTCO_vendor_support
soundcore
intel_cstate
mei_me
intel_uncore
e1000e
intel_rapl_perf
mei
sg
lpc_ich
i2c_i801
ir_rc6_decoder
pcspkr
rc_rc6_mce
nuvoton_cir
rc_core
acpi_pad
pcc_cpufreq
ehci_pci
ehci_hcd
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
joydev
dm_crypt
dm_mod
hid_logitech_hidpp
hid_logitech_dj
hid_generic
usbhid
hid
sd_mod
i915
crc32c_intel
i2c_algo_bit
xhci_pci
drm_kms_helper
xhci_hcd
ahci
libahci
drm
aesni_intel
libata
usbcore
aes_x86_64
crypto_simd
usb_common
cryptd
scsi_mod
glue_helper
fan
thermal
evdev
video
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo enp0s25
iface lo inet loopback
allow-hotplug enp0s25
iface enp0s25 inet static
address 192.168.120.100/24
gateway 192.168.120.1
dns-nameservers 192.168.120.1
dns-search fritz.box
ethernet-wol g
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP group default qlen 1000
link/ether b8:ae:ed:72:db:9c brd ff:ff:ff:ff:ff:ff
inet 192.168.120.100/24 brd 192.168.120.255 scope global enp0s25
valid_lft forever preferred_lft forever
inet6 fe80::baae:edff:fe72:db9c/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
enp0s25: 1508515 10157 0 1 0 0 0 16 11217422
14043 0 0 0 0 0 0
lo: 9699047 15335 0 0 0 0 0 0 9699047
15335 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
10172 total packets received
0 forwarded
0 incoming packets discarded
10172 incoming packets delivered
8023 requests sent out
Icmp:
3 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 3
3 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 3
IcmpMsg:
InType3: 3
OutType3: 3
Tcp:
7 active connection openings
4 passive connection openings
2 failed connection attempts
0 connection resets received
4 connections established
25348 segments received
29254 segments sent out
2 segments retransmitted
0 bad segments received
8 resets sent
Udp:
219 packets received
0 packets to unknown port received
0 packet receive errors
82 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 12
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
150 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 3 times
16357 packet headers predicted
561 acknowledgments not containing data payload received
11400 predicted acknowledgments
TCPLossProbes: 2
TCPDSACKOldSent: 3
TCPDSACKRecv: 2
3 connections reset due to unexpected data
TCPDSACKIgnoredNoUndo: 2
TCPRcvCoalesce: 136
TCPAutoCorking: 106
TCPOrigDataSent: 23895
TCPHystartTrainDetect: 2
TCPHystartTrainCwnd: 40
TCPDelivered: 23902
IpExt:
InMcastPkts: 36
OutMcastPkts: 25
InBcastPkts: 97
OutBcastPkts: 43
InOctets: 1331835
OutOctets: 10650228
InMcastOctets: 3884
OutMcastOctets: 3057
InBcastOctets: 10142
OutBcastOctets: 5567
InNoECTPkts: 10204
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI
[8086:1604] (rev 09)
Subsystem: Intel Corporation Broadwell-U Host Bridge -OPI [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500
[8086:1616] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation HD Graphics 5500 [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 99000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=512M]
Region 4: I/O ports at 3000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller
[8086:160c] (rev 09)
Subsystem: Intel Corporation Broadwell-U Audio Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 9a034000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI
Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Wildcat Point-LP USB xHCI Controller
[8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at 9a020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI
Controller #1 [8086:9cba] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP MEI Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at 9a03d000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (3)
I218-V [8086:15a3] (rev 03)
Subsystem: Intel Corporation Ethernet Connection (3) I218-V [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 9a000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 9a03b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition
Audio Controller [8086:9ca0] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP High Definition Audio
Controller [8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 9a030000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB EHCI
Controller [8086:9ca6] (rev 03) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Wildcat Point-LP USB EHCI Controller
[8086:2057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 9a03a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller
[8086:9cc3] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP LPC Controller [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA
Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Wildcat Point-LP SATA Controller [AHCI
Mode] [8086:2057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 30d0 [size=8]
Region 1: I/O ports at 30c0 [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30a0 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at 9a039000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller
[8086:9ca2] (rev 03)
Subsystem: Intel Corporation Wildcat Point-LP SMBus Controller
[8086:2057]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 9a038000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
** USB devices:
Bus 003 Device 002: ID 8087:8001 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 2659:1210 Sundtek MediaTV Pro III (EU)
Bus 001 Device 003: ID 0b48:3014 TechnoTrend AG TT-TVStick CT2-4400
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8),
LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.2-3
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-0.1
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-9
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
