Package: src:linux Version: 5.10.70-1 Severity: normal Tags: ipv6 Dear Maintainer, when the route MTU (as set from IPv6 router advertisement) is > 1500, but interface MTU is <= 1500 (i.e. jumbo frames are not enabled), trying to copy a large file on LAN (tried scp and rsync) produces a hang (backtrace below).
It does not happen if - jumbo frames are enabled on the nic (by "ip link set eth0 mtu <X>" for <X> >= 1501) - the route MTU is manually set to 1500 After the hang the NIC remains usable, but the transmitting process that triggered it is unkillable. The NIC is RTL8211E Gigabit Ethernet, built-in on the Gigabyte Z68X-UD3H-B3 motherboard. Cheers, -- Anton Khirnov hang backtrace: ------------[ cut here ]------------ NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:467 dev_watchdog+0x24d/0x260 Modules linked in: nls_iso8859_1 udf crc_itu_t isofs bfq bnep bluetooth jitterentropy_rng drbg ansi_cprng ecdh_generic ecc cpufreq_ conservative cpufreq_userspace cpufreq_powersave cpufreq_ondemand binfmt_misc fuse bridge cfg80211 rfkill 8021q garp stp mrp llc nls_ascii nls_cp437 vfat fat efivarfs it87 hwmon_vid loop nvidia_drm(POE) nvidia_modeset(POE) parport_pc ppdev lp parport uvcvideo videobuf2_vmalloc snd_usb_audio videobuf2_memops videobuf2_v4l2 snd_usbmidi_lib snd_hda_codec_realtek intel_rapl_msr videobuf2_common snd_rawmidi intel_rapl_common snd_hda_codec_gene ric videodev uas snd_seq_device snd_hda_codec_hdmi usb_storage ledtrig_audio mc x86_pkg_temp_thermal intel_powerclamp snd_hda_intel coretemp snd_intel_dspcfg soundwire_intel kvm_intel soundwire_generic_allocation snd_soc_core kvm mei_hdcp at24 snd_compress soundwire_cadence snd_hda_codec irqbypass r8169 nvidia(POE) snd_hda_core crc32_pclmul snd_hwdep mxm_wmi soundwire_bus realtek ghash_clmulni_intel snd_pcm mei_me 2021-11-01T10:42:56.774579+01:00 kern.warning daenerys.khirnov.net kernel: [ 1167.065799] snd_timer mdio_devres rapl libphy xhci_pci xhci_hcd intel_cstate snd intel_uncore i2c_i801 sr_mod mei i2c_smbus lpc_ich soundcore cdrom sg pcspkr wmi efi_pstore button ext4 crc16 mbcache jbd2 hid_logitech_hidpp hid_logitech_dj dm_crypt dm_mod raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx joydev hid_generic usbhid hid raid6_pq raid0 multipath linear crc32c_generic raid1 md_mod sd_mod t10_pi crc_t10dif crct10dif_generic i915 i2c_algo_bit crct10dif_pclmul crct10dif_common crc32c_intel drm_kms_helper cec ahci libahci drm aesni_intel ehci_pci libata ehci_hcd glue_helper libaes usbcore crypto_simd scsi_mod cryptd evdev serio_raw usb_common fan video CPU: 0 PID: 0 Comm: swapper/0 Tainted: P OE 5.10.0-9-amd64 #1 Debian 5.10.70-1 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z68X-UD3H-B3, BIOS U1n 07/11/2016 RIP: 0010:dev_watchdog+0x24d/0x260 Code: a9 ca fd ff eb a9 4c 89 f7 c6 05 34 82 10 01 01 e8 58 9d fa ff 44 89 e9 4c 89 f6 48 c7 c7 98 9d 36 9c 48 89 c2 e8 46 2f 14 00 <0f> 0b eb 8a 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 66 66 66 RSP: 0018:ffffa55b00003eb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff97da25665400 RCX: ffffffff9c8b33e8 RDX: c0000000ffffefff RSI: 00000000ffffefff RDI: 0000000000000246 RBP: ffff97d640a883dc R08: 0000000000000000 R09: ffffa55b00003cd8 R10: ffffa55b00003cd0 R11: ffffffff9c8cb428 R12: ffff97d640a88480 R13: 0000000000000000 R14: ffff97d640a88000 R15: ffff97da25665480 FS: 0000000000000000(0000) GS:ffff97dd4f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b78ef2ab18 CR3: 00000004e500a005 CR4: 00000000000606f0 Call Trace: <IRQ> ? pfifo_fast_enqueue+0x150/0x150 call_timer_fn+0x29/0xf0 __run_timers.part.0+0x1d3/0x240 ? recalibrate_cpu_khz+0x10/0x10 ? ktime_get+0x38/0xa0 ? lapic_next_deadline+0x28/0x30 ? clockevents_program_event+0x8d/0xf0 run_timer_softirq+0x26/0x50 __do_softirq+0xc5/0x275 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x8e/0xc0 sysvec_apic_timer_interrupt+0x36/0x80 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:cpuidle_enter_state+0xc4/0x350 Code: a1 ff 65 8b 3d ed fe 76 64 e8 48 f3 a1 ff 49 89 c5 66 66 66 66 90 31 ff e8 d9 fd a1 ff 45 84 ff 0f 85 fa 00 00 00 fb 66 66 90 <66> 66 90 45 85 f6 0f 88 06 01 00 00 49 63 c6 4c 2b 2c 24 48 8d 14 RSP: 0018:ffffffff9c803e70 EFLAGS: 00000246 RAX: ffff97dd4f42bcc0 RBX: 0000000000000004 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000002589583f RDI: 0000000000000000 RBP: ffff97dd4f434700 R08: 0000010fba85c086 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000001f01b R12: ffffffff9c9ae760 R13: 0000010fba85c086 R14: 0000000000000004 R15: 0000000000000000 cpuidle_enter+0x29/0x40 do_idle+0x1ef/0x2b0 cpu_startup_entry+0x19/0x20 start_kernel+0x587/0x5a8 secondary_startup_64_no_verify+0xb0/0xbb ---[ end trace 53c21c379f58f497 ]--- -- Package-specific info: ** Version: Linux version 5.10.0-9-amd64 ([email protected]) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.70-1 (2021-09-30) ** Command line: BOOT_IMAGE=/vmlinuz-5.10.0-9-amd64 root=/dev/mapper/daenerys-root ro resume=/dev/mapper/daenerys-swap ** Tainted: POE (12289) * proprietary module was loaded * externally-built ("out-of-tree") module was loaded * unsigned module was loaded ** Kernel log: [ 150.846467] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 150.859036] sd 8:0:0:2: [sde] Attached SCSI removable disk [ 151.032783] usb 1-1.3.2: set resolution quirk: cval->res = 384 [ 151.034742] usbcore: registered new interface driver snd-usb-audio [ 151.034772] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825) [ 151.076248] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/input/input41 [ 151.078842] usbcore: registered new interface driver uvcvideo [ 151.080841] USB Video Class driver (1.1.1) [ 151.596305] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 152.052910] lp: driver loaded but no devices found [ 152.074584] ppdev: user-space parallel port driver [ 152.182438] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.56 Tue Feb 23 23:20:29 UTC 2021 [ 152.225579] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 152.226785] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 [ 152.548092] loop: module loaded [ 152.576525] it87: Found IT8728F chip at 0xa30, revision 1 [ 152.578329] it87: Beeping is supported [ 153.080173] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 153.133843] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 153.236860] EXT4-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended [ 153.265875] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 153.347053] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 153.349610] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 153.390698] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null) [ 153.392933] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 153.680079] Adding 20971516k swap on /dev/mapper/daenerys-swap. Priority:-2 extents:1 across:20971516k FS [ 154.743849] 8021q: 802.1Q VLAN Support v1.8 [ 154.836685] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 154.838107] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 154.839450] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 154.840794] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 154.854367] platform regulatory.0: firmware: failed to load regulatory.db (-2) [ 154.855483] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 154.856570] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 154.857657] cfg80211: failed to load regulatory.db [ 155.060489] r8169 0000:07:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 155.063242] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE) [ 155.294302] r8169 0000:07:00.0 eth0: Link is Down [ 158.293928] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 158.296250] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 160.315423] usb 2-1.2: USB disconnect, device number 7 [ 161.200055] usb 2-1.2: new low-speed USB device number 8 using ehci-pci [ 161.948166] usb 2-1.2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 161.950493] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 161.952836] usb 2-1.2: Product: 5E [ 161.955128] usb 2-1.2: Manufacturer: EATON [ 163.916062] hid-generic 0003:0463:FFFF.000E: hiddev2,hidraw6: USB HID v1.10 Device [EATON 5E] on usb-0000:00:1d.0-1.2/input0 [ 167.127790] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 167.147469] br_utrst: port 1(eth0.3) entered blocking state [ 167.149133] br_utrst: port 1(eth0.3) entered disabled state [ 167.150822] device eth0.3 entered promiscuous mode [ 167.154267] device eth0 entered promiscuous mode [ 167.157774] br_utrst: port 1(eth0.3) entered blocking state [ 167.158985] br_utrst: port 1(eth0.3) entered forwarding state [ 167.397894] fuse: init (API version 7.32) [ 167.608114] usb 1-1.3.2: reset high-speed USB device number 8 using ehci-pci [ 171.585733] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 171.699212] Bluetooth: Core ver 2.22 [ 171.700448] NET: Registered protocol family 31 [ 171.701692] Bluetooth: HCI device and connection manager initialized [ 171.702901] Bluetooth: HCI socket layer initialized [ 171.704107] Bluetooth: L2CAP socket layer initialized [ 171.705285] Bluetooth: SCO socket layer initialized [ 171.876477] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 171.878969] Bluetooth: BNEP filters: protocol multicast [ 171.881421] Bluetooth: BNEP socket layer initialized [ 200.534589] io scheduler bfq registered [ 212.756426] cgroup: login (2551) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 212.756468] cgroup: "memory" requires setting use_hierarchy to 1 on the root [ 240.405181] r8169 0000:07:00.0 eth0: Link is Down [ 240.406345] device eth0 left promiscuous mode [ 240.407165] br_utrst: port 1(eth0.3) entered disabled state [ 243.286494] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE) [ 243.507820] device eth0 entered promiscuous mode [ 243.509632] r8169 0000:07:00.0 eth0: Link is Down [ 246.497607] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 246.498489] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 246.499395] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.3: link becomes ready [ 246.500282] br_utrst: port 1(eth0.3) entered blocking state [ 246.500285] br_utrst: port 1(eth0.3) entered forwarding state [ 303.452373] r8169 0000:07:00.0 eth0: Link is Down [ 303.453355] device eth0 left promiscuous mode [ 303.453994] br_utrst: port 1(eth0.3) entered disabled state [ 305.317819] RTL8211E Gigabit Ethernet r8169-0-700:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE) [ 305.571125] device eth0 entered promiscuous mode [ 305.573042] r8169 0000:07:00.0 eth0: Link is Down [ 308.550645] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 308.551511] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 308.552494] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.3: link becomes ready [ 308.553507] br_utrst: port 1(eth0.3) entered blocking state [ 308.553510] br_utrst: port 1(eth0.3) entered forwarding state [ 396.104872] usb 1-1.3.3: USB disconnect, device number 9 [ 401.448673] usb 1-1.3.4: new full-speed USB device number 10 using ehci-pci [ 401.558939] usb 1-1.3.4: New USB device found, idVendor=20a0, idProduct=42b1, bcdDevice= 1.00 [ 401.558945] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 401.558948] usb 1-1.3.4: Product: Nitrokey FIDO2 2.0.0 [ 401.558950] usb 1-1.3.4: Manufacturer: Nitrokey [ 401.558953] usb 1-1.3.4: SerialNumber: 205D329A564E [ 401.560414] hid-generic 0003:20A0:42B1.000F: hiddev1,hidraw5: USB HID v1.11 Device [Nitrokey Nitrokey FIDO2 2.0.0] on usb-0000:00:1a.0-1.3.4/input0 [ 466.902261] logitech-hidpp-device 0003:046D:406F.0007: HID++ 4.5 device connected. ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: To be filled by O.E.M. product_version: To be filled by O.E.M. chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: U1n board_vendor: Gigabyte Technology Co., Ltd. board_name: Z68X-UD3H-B3 board_version: To be filled by O.E.M. ** Loaded modules: bfq bnep bluetooth jitterentropy_rng drbg ansi_cprng ecdh_generic ecc cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_ondemand binfmt_misc fuse bridge cfg80211 rfkill 8021q garp stp mrp llc nls_ascii nls_cp437 vfat fat efivarfs it87 hwmon_vid loop nvidia_drm(POE) nvidia_modeset(POE) parport_pc ppdev lp parport uvcvideo snd_usb_audio videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd_usbmidi_lib snd_hda_codec_realtek videobuf2_common snd_rawmidi uas videodev snd_seq_device usb_storage snd_hda_codec_generic mc snd_hda_codec_hdmi ledtrig_audio intel_rapl_msr snd_hda_intel intel_rapl_common snd_intel_dspcfg soundwire_intel soundwire_generic_allocation snd_soc_core x86_pkg_temp_thermal nvidia(POE) intel_powerclamp snd_compress soundwire_cadence snd_hda_codec snd_hda_core coretemp snd_hwdep kvm_intel soundwire_bus at24 kvm snd_pcm irqbypass mei_hdcp crc32_pclmul r8169 snd_timer sr_mod mxm_wmi snd ghash_clmulni_intel cdrom rapl sg intel_cstate xhci_pci pcspkr realtek i2c_i801 mdio_devres soundcore xhci_hcd mei_me libphy i2c_smbus lpc_ich mei intel_uncore efi_pstore wmi button ext4 crc16 mbcache jbd2 hid_logitech_hidpp hid_logitech_dj dm_crypt dm_mod raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx joydev hid_generic usbhid hid raid6_pq raid0 multipath linear crc32c_generic raid1 md_mod sd_mod t10_pi crc_t10dif crct10dif_generic i915 crct10dif_pclmul crct10dif_common crc32c_intel i2c_algo_bit drm_kms_helper ahci libahci cec ehci_pci libata aesni_intel ehci_hcd drm usbcore glue_helper libaes scsi_mod crypto_simd evdev cryptd serio_raw usb_common fan video ** Network interface configuration: *** /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth0.3 inet manual auto br_utrst iface br_utrst inet manual post-up echo 1 > /proc/sys/net/ipv6/conf/$IFACE/disable_ipv6 bridge_ports eth0.3 bridge_fd 0 bridge_maxwait 0 (note: this is the working configuration with the interface MTU set correctly) ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9004 qdisc pfifo_fast state UP group default qlen 1000 link/ether 50:e5:49:3d:a3:f2 brd ff:ff:ff:ff:ff:ff inet6 2a00:c500:561:201::2/128 scope global dynamic noprefixroute valid_lft 41614sec preferred_lft 25414sec inet6 2a00:c500:561:201:52e5:49ff:fe3d:a3f2/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 86158sec preferred_lft 14158sec inet6 fe80::52e5:49ff:fe3d:a3f2/64 scope link valid_lft forever preferred_lft forever 3: br_utrst: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 50:e5:49:3d:a3:f2 brd ff:ff:ff:ff:ff:ff 4: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br_utrst state UP group default qlen 1000 link/ether 50:e5:49:3d:a3:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::52e5:49ff:fe3d:a3f2/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 94771 1069 0 0 0 0 0 0 94771 1069 0 0 0 0 0 0 eth0: 57188895 15720 0 0 0 0 0 949 1674507 13257 0 0 0 0 0 0 br_utrst: 7394 73 0 0 0 0 0 14 108 2 0 0 0 0 0 0 eth0.3: 40358 124 0 0 0 0 0 14 2706 35 0 0 0 0 0 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Subsystem: Gigabyte Technology Co., Ltd 2nd Generation Core Processor Family DRAM Controller [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: snb_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff [size=4K] Memory behind bridge: f6000000-f70fffff [size=17M] Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff [size=288M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0122] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd 2nd Generation Core Processor Family Integrated Graphics Controller [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family MEI Controller [1458:1c3a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 28 Region 0: Memory at f7c0b000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family High Definition Audio Controller [1458:a132] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff [size=4K] Memory behind bridge: f7b00000-f7bfffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: f7a00000-f7afffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: f7900000-f79fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000c000-0000cfff [size=4K] Memory behind bridge: [disabled] Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 0000b000-0000bfff [size=4K] Memory behind bridge: f7800000-f78fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation Z68 Express Chipset LPC Controller [8086:1c44] (rev 05) Subsystem: Gigabyte Technology Co., Ltd Z68 Express Chipset LPC Controller [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Gigabyte Technology Co., Ltd 6 Series/C200 Series Chipset Family SMBus Controller [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP104 [GeForce GTX 1080] [10de:1b80] (rev a1) (prog-if 00 [VGA controller]) Subsystem: PNY GP104 [GeForce GTX 1080] [196e:119e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at e000 [size=128] Expansion ROM at f7000000 [virtual] [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia 01:00.1 Audio device [0403]: NVIDIA Corporation GP104 High Definition Audio Controller [10de:10f0] (rev a1) Subsystem: PNY GP104 High Definition Audio Controller [196e:119e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 03:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 10) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Bus: primary=03, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000d000-0000dfff [size=4K] Memory behind bridge: f7b00000-f7bfffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 05:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-880GMA-USB3 [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 06:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-880GMA-USB3 [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at c000 [size=256] Region 2: Memory at f2104000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 08:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at b040 [size=8] Region 1: I/O ports at b030 [size=4] Region 2: I/O ports at b020 [size=8] Region 3: I/O ports at b010 [size=4] Region 4: I/O ports at b000 [size=16] Region 5: Memory at f7810000 (32-bit, non-prefetchable) [size=512] Expansion ROM at f7800000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci ** USB devices: Bus 002 Device 008: ID 0463:ffff MGE UPS Systems UPS Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 0bda:0301 Realtek Semiconductor Corp. multicard reader Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 007: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 005: ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse Bus 001 Device 004: ID feed:1307 ErgoDox EZ ErgoDox EZ Bus 001 Device 010: ID 20a0:42b1 Clay Logic Nitrokey FIDO2 2.0.0 Bus 001 Device 008: ID 046d:0825 Logitech, Inc. Webcam C270 Bus 001 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 003: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 11.1 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'testing-debug'), (500, 'stable-security'), (500, 'stable'), (420, 'testing'), (400, 'unstable'), (300, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-9-amd64 (SMP w/8 CPU threads) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-5.10.0-9-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.140 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-9-amd64 recommends: pn apparmor <none> ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.10.0-9-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.04-20 pn linux-doc-5.10 <none> Versions of packages linux-image-5.10.0-9-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20210315-3 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
