Your message dated Mon, 7 Mar 2022 15:44:48 -0500
with message-id <[email protected]>
and subject line Re: Bug#961691: linux-image-5.6.0-1-amd64: System hangs all
the time
has caused the Debian Bug report #961691,
regarding linux-image-5.6.0-1-amd64: System hangs all the time
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
961691: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=961691
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 5.6.7-1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
Since upgrade of 2020-05-18 system started to hang all the time without any
reason,
forcing me to reboot computer each time loosing my work.
-- Package-specific info:
** Version:
Linux version 5.6.0-1-amd64 ([email protected]) (gcc version 9.3.0
(Debian 9.3.0-11)) #1 SMP Debian 5.6.7-1 (2020-04-29)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.6.0-1-amd64
root=UUID=284f2b06-aeb5-4d51-bffe-ddb426f4c63f ro
** Not tainted
** Kernel log:
[ 10.387864] systemd[1]: Mounted Huge Pages File System.
[ 10.390388] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.394777] systemd[1]: Mounted Kernel Debug File System.
[ 10.399670] systemd[1]: Mounted Kernel Trace File System.
[ 10.404568] systemd[1]: Finished Create list of static device nodes for the
current kernel.
[ 10.427001] RPC: Registered named UNIX socket transport module.
[ 10.429045] RPC: Registered udp transport module.
[ 10.431114] RPC: Registered tcp transport module.
[ 10.433100] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.437145] systemd[1]: Mounted RPC Pipe File System.
[ 10.440980] systemd[1]: Starting pNFS block layout mapping daemon...
[ 10.487925] systemd[1]: Finished Load Kernel Modules.
[ 10.490130] systemd[1]: Condition check resulted in FUSE Control File System
being skipped.
[ 10.490243] systemd[1]: Condition check resulted in Kernel Configuration
File System being skipped.
[ 10.493417] systemd[1]: Starting Apply Kernel Variables...
[ 10.516173] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.522665] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 10.525011] systemd[1]: Started pNFS block layout mapping daemon.
[ 10.646829] systemd[1]: Condition check resulted in Rebuild Hardware
Database being skipped.
[ 10.648586] systemd[1]: Condition check resulted in Platform Persistent
Storage Archival being skipped.
[ 10.651696] systemd[1]: Starting Load/Save Random Seed...
[ 10.655199] systemd[1]: Starting Create System Users...
[ 10.779957] systemd[1]: Finished udev Coldplug all Devices.
[ 10.816807] systemd[1]: Starting Helper to synchronize boot up for
ifupdown...
[ 10.828057] Installing knfsd (copyright (C) 1996 [email protected]).
[ 10.831924] systemd[1]: Mounted NFSD configuration filesystem.
[ 10.860106] systemd[1]: Finished Apply Kernel Variables.
[ 10.930500] systemd[1]: Finished Load/Save Random Seed.
[ 11.041107] systemd[1]: Finished Set the console keyboard layout.
[ 11.050969] systemd[1]: Finished Create System Users.
[ 11.056564] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.090135] systemd[1]: Started Journal Service.
[ 11.119693] systemd-journald[258]: Received client request to flush runtime
journal.
[ 11.379257] systemd-journald[258]: File
/var/log/journal/a7cfea2033ec4c4182a6354cbc46c69c/system.journal corrupted or
uncleanly shut down, renaming and replacing.
[ 13.136231] parport_pc 00:03: reported by Plug and Play ACPI
[ 13.137946] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 13.377785] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 13.516053] ppdev: user-space parallel port driver
[ 13.556030] iTCO_vendor_support: vendor-support=0
[ 13.645501] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.647259] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 13.649190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.563063] intel_powerclamp: No package C-state available
[ 14.605586] intel_powerclamp: No package C-state available
[ 14.641855] intel_powerclamp: No package C-state available
[ 14.680160] intel_powerclamp: No package C-state available
[ 15.115708] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S:
line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 15.117461] snd_hda_codec_via hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 15.119133] snd_hda_codec_via hdaudioC0D0: hp_outs=1
(0x1d/0x0/0x0/0x0/0x0)
[ 15.120838] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 15.122623] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
[ 15.124284] snd_hda_codec_via hdaudioC0D0: inputs:
[ 15.125939] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 15.127550] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 15.129180] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 15.130763] snd_hda_codec_via hdaudioC0D0: CD=0x1f
[ 15.132384] Adding 2539516k swap on /dev/sda2. Priority:-2 extents:1
across:2539516k FS
[ 15.148279] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.150830] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.153555] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.156024] input: HDA Intel Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.158272] input: HDA Intel Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.160532] input: HDA Intel Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.162512] input: HDA Intel Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 15.164766] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 16.375223] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
(null)
[ 16.988740] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 18.177221] audit: type=1400 audit(1590626825.077:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=437 comm="apparmor_parser"
[ 18.194423] audit: type=1400 audit(1590626825.093:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=438
comm="apparmor_parser"
[ 18.196236] audit: type=1400 audit(1590626825.093:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=438
comm="apparmor_parser"
[ 18.197901] audit: type=1400 audit(1590626825.093:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=438
comm="apparmor_parser"
[ 18.229841] audit: type=1400 audit(1590626825.129:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=439 comm="apparmor_parser"
[ 18.247192] audit: type=1400 audit(1590626825.145:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=443 comm="apparmor_parser"
[ 18.249572] audit: type=1400 audit(1590626825.149:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=442
comm="apparmor_parser"
[ 18.251264] audit: type=1400 audit(1590626825.149:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=442 comm="apparmor_parser"
[ 18.303320] audit: type=1400 audit(1590626825.201:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=440
comm="apparmor_parser"
[ 18.355991] audit: type=1400 audit(1590626825.257:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=445
comm="apparmor_parser"
[ 20.653638] enp4s1: setting full-duplex.
[ 20.655477] enp4s0: setting half-duplex.
[ 21.463549] RTL8211B Gigabit Ethernet r8169-100:00: attached PHY driver
[RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 21.577087] r8169 0000:01:00.0 enp1s0: Link is Down
[ 23.164417] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 23.166043] floppy: error 10 while reading block 0
[ 23.208547] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow
control off
[ 23.210187] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 35.532169] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 35.533771] floppy: error 10 while reading block 0
[ 47.883967] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 47.885648] floppy: error 10 while reading block 0
[ 49.122156] kauditd_printk_skb: 8 callbacks suppressed
[ 49.122158] audit: type=1400 audit(1590626856.025:20): apparmor="DENIED"
operation="open" profile="/usr/sbin/ntpd" name="/run/systemd/userdb/" pid=631
comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 50.181909] NFSD: Using UMH upcall client tracking operations.
[ 50.183401] NFSD: starting 90-second grace period (net f0000098)
[ 58.760939] fuse: init (API version 7.31)
[ 60.155575] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ)
flags 0x0 phys_seg 1 prio class 0
[ 60.155582] floppy: error 10 while reading block 0
[ 73.710023] rfkill: input handler disabled
[ 77.926771] rfkill: input handler enabled
[ 82.760293] rfkill: input handler disabled
[ 84.382713] traps: ibus-x11[1203] general protection fault ip:7f5f8b713e16
sp:7fff8af07550 error:0 in libc-2.30.so[7f5f8b6fb000+14a000]
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0901
board_vendor: ASUSTeK Computer INC.
board_name: P5QL-CM
board_version: Rev X.0x
** Loaded modules:
fuse
rfkill
nft_counter
ipt_REJECT
nf_reject_ipv4
xt_state
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nft_compat
nf_tables
nfnetlink
binfmt_misc
snd_hda_codec_via
snd_hda_codec_generic
ledtrig_audio
snd_hda_intel
snd_intel_dspcfg
snd_hda_codec
coretemp
joydev
kvm_intel
snd_hda_core
kvm
snd_hwdep
iTCO_wdt
snd_pcm
irqbypass
iTCO_vendor_support
ppdev
sg
watchdog
snd_timer
serio_raw
evdev
snd
asus_atk0110
parport_pc
parport
soundcore
acpi_cpufreq
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
i915
video
i2c_algo_bit
pata_jmicron
ata_piix
drm_kms_helper
cec
libata
i2c_i801
3c59x
mii
r8169
drm
realtek
ehci_pci
uhci_hcd
scsi_mod
lpc_ich
libphy
mfd_core
ehci_hcd
usbcore
usb_common
floppy
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. 4 Series Chipset DRAM Controller
[1043:8336]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics
Controller [1043:8336]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at bc00 [size=8]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics
Controller [1043:8336]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe3fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) HD Audio
Controller [1043:8420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe3f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: 9de00000-9dffffff [size=2M]
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
[size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: fea00000-feafffff [size=1M]
Prefetchable memory behind bridge: 00000000a0000000-00000000a01fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: fe900000-fe9fffff [size=1M]
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
[size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe3fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: feb00000-febfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. 82801JIB (ICH10) LPC Interface
Controller [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8f [PCI native mode controller,
supports both channels switched to ISA compatibility mode, supports bus
mastering])
Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) 4 port SATA IDE
Controller [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=16]
Region 5: I/O ports at 9080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe3fb400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 [8086:3a26] (prog-if 85 [PCI native mode-only
controller, supports bus mastering])
Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) 2 port SATA IDE
Controller [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. M3A78 Series Motherboard [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller
[197b:2368] (prog-if 85 [PCI native mode-only controller, supports bus
mastering])
Subsystem: ASUSTeK Computer Inc. JMB368 IDE controller [1043:827e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, ata_generic
04:00.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone]
[10b7:9055] (rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=128]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
04:01.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone]
[10b7:9055] (rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e880 [size=128]
Region 1: Memory at febff800 (32-bit, non-prefetchable) [size=128]
Expansion ROM at feba0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
** USB devices:
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 09da:8090 A4Tech Co., Ltd. X-718BK Oscar Optical Gaming
Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.6.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.137
ii kmod 27+20200310-2
ii linux-base 4.6
Versions of packages linux-image-5.6.0-1-amd64 recommends:
ii apparmor 2.13.4-1+b1
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.6.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-7
pn linux-doc-5.6 <none>
Versions of packages linux-image-5.6.0-1-amd64 is related to:
ii firmware-amd-graphics 20190717-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190717-2
ii firmware-misc-nonfree 20190717-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
On Thu, 25 Jun 2020 12:06:00 +0700 Igor Liferenko wrote:
> The problem has been fixed with the following command:
>
> echo 'ACTION=="add|change", KERNEL=="sd*[!0-9]",
> ATTR{queue/scheduler}="none"' >>/etc/udev/rules.d/60-scheduler.rules
>
> Please close this bug.
>
>
Closing as requested. Thanks!
--- End Message ---
