--- Begin Message ---
Package: src:linux
Version: 3.16.76-1
Severity: important
Dear Maintainer,
* What led up to the situation?
I want to play music over bluetooth and my bluetooth-receiver. Connection was
established für 2-10 seconds and then disconnected again. Also connection to
PDAs and smartphones for transferring and receiving files is not working.
* What outcome did you expect instead?
With the kernel 3.16.72-1 (debian) bluetooth was working as expected. Sending
and receiving of files working good, connection to bt-headphones and bt-audio-
receivers was working.
-- Package-specific info:
** Version:
Linux version 3.16.0-10-686-pae (debian-kernel@lists.debian.org) (gcc version
4.9.2 (Debian 4.9.2-10+deb8u2) ) #1 SMP Debian 3.16.76-1 (2019-11-12)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-10-686-pae
root=UUID=f97e167c-0dfe-4272-abc1-dff0972c7dce ro
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 18.771097] atl1c 0000:03:00.0: irq 41 for MSI/MSI-X
[ 18.785818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.802847] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[ 18.809519] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 19.089267] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[ 19.099956] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 19.187473] IPv6: ADDRCONF(NETDEV_UP): wlan5: link is not ready
[ 35.133402] Bluetooth: RFCOMM TTY layer initialized
[ 35.133447] Bluetooth: RFCOMM socket layer initialized
[ 35.133475] Bluetooth: RFCOMM ver 1.11
[ 40.496818] gma500 0000:00:02.0: Backlight lvds set brightness 7a121e84
[ 58.433395] wlan5: authenticate with 24:65:11:50:c5:c0
[ 58.437585] wlan5: send auth to 24:65:11:50:c5:c0 (try 1/3)
[ 58.471201] wlan5: send auth to 24:65:11:50:c5:c0 (try 2/3)
[ 58.477569] wlan5: authenticated
[ 58.481415] wlan5: waiting for beacon from 24:65:11:50:c5:c0
[ 58.504154] wlan5: associate with 24:65:11:50:c5:c0 (try 1/3)
[ 58.538220] wlan5: associate with 24:65:11:50:c5:c0 (try 2/3)
[ 58.547643] wlan5: RX AssocResp from 24:65:11:50:c5:c0 (capab=0x431 status=0
aid=4)
[ 58.574783] wlan5: associated
[ 58.574946] IPv6: ADDRCONF(NETDEV_CHANGE): wlan5: link becomes ready
[ 58.575042] cfg80211: Calling CRDA for country: DE
[ 58.595204] cfg80211: Regulatory domain changed to country: DE
[ 58.595221] cfg80211: DFS Master region: ETSI
[ 58.595228] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 58.595242] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 58.595254] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 58.595268] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 58.595279] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698
mBm), (0 s)
[ 58.595290] cfg80211: (5725000 KHz - 5875000 KHz @ 80000 KHz), (N/A, 1397
mBm), (N/A)
[ 58.595301] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 61.336645] perf interrupt took too long (2534 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[ 194.117842] wlan5: authenticate with 24:65:11:50:c5:bc
[ 194.122005] wlan5: send auth to 24:65:11:50:c5:bc (try 1/3)
[ 194.122296] cfg80211: Calling CRDA to update world regulatory domain
[ 194.145745] cfg80211: World regulatory domain updated:
[ 194.145760] cfg80211: DFS Master region: unset
[ 194.145765] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 194.145774] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 194.145783] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 194.145790] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 194.145798] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 194.145806] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 194.145813] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 194.145820] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 194.145827] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 194.177589] wlan5: authenticated
[ 194.180101] wlan5: associate with 24:65:11:50:c5:bc (try 1/3)
[ 194.190864] wlan5: associate with 24:65:11:50:c5:bc (try 2/3)
[ 194.197462] wlan5: RX AssocResp from 24:65:11:50:c5:bc (capab=0x411 status=0
aid=2)
[ 194.216558] wlan5: associated
[ 194.216914] cfg80211: Calling CRDA for country: DE
[ 194.246580] cfg80211: Regulatory domain changed to country: DE
[ 194.246598] cfg80211: DFS Master region: ETSI
[ 194.246607] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 194.246620] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 194.246633] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 194.246646] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 194.246658] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698
mBm), (0 s)
[ 194.246669] cfg80211: (5725000 KHz - 5875000 KHz @ 80000 KHz), (N/A, 1397
mBm), (N/A)
[ 194.246680] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 194.276129] wlan5: Limiting TX power to 20 (23 - 3) dBm as advertised by
24:65:11:50:c5:bc
[ 196.604220] perf interrupt took too long (5010 > 5000), lowering
kernel.perf_event_max_sample_rate to 25000
[ 353.750063] LogServer[2062]: segfault at 38 ip 00000038 sp ae383c8c error 14
in mythlogserver[8048000+3000]
[ 502.222595] wlan5: authenticate with 24:65:11:50:c5:c0
[ 502.227437] wlan5: send auth to 24:65:11:50:c5:c0 (try 1/3)
[ 502.231978] cfg80211: Calling CRDA to update world regulatory domain
[ 502.251694] cfg80211: World regulatory domain updated:
[ 502.251711] cfg80211: DFS Master region: unset
[ 502.251718] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 502.251730] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 502.251741] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 502.251751] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 502.251762] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 502.251772] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 502.251781] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 502.251790] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 502.251799] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 502.255802] wlan5: send auth to 24:65:11:50:c5:c0 (try 2/3)
[ 502.259665] wlan5: authenticated
[ 502.260366] wlan5: waiting for beacon from 24:65:11:50:c5:c0
[ 502.531642] wlan5: authenticate with 24:65:11:50:c5:bc
[ 502.552868] wlan5: send auth to 24:65:11:50:c5:bc (try 1/3)
[ 502.609384] wlan5: authenticated
[ 502.612256] wlan5: associate with 24:65:11:50:c5:bc (try 1/3)
[ 502.623892] wlan5: associate with 24:65:11:50:c5:bc (try 2/3)
[ 502.627528] wlan5: RX AssocResp from 24:65:11:50:c5:bc (capab=0x411 status=0
aid=2)
[ 502.647122] wlan5: associated
[ 502.647395] cfg80211: Calling CRDA for country: DE
[ 502.700301] cfg80211: Regulatory domain changed to country: DE
[ 502.700318] cfg80211: DFS Master region: ETSI
[ 502.700325] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 502.700338] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 502.700350] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 502.700361] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 502.700371] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698
mBm), (0 s)
[ 502.700380] cfg80211: (5725000 KHz - 5875000 KHz @ 80000 KHz), (N/A, 1397
mBm), (N/A)
[ 502.700391] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 502.708991] wlan5: Limiting TX power to 20 (23 - 3) dBm as advertised by
24:65:11:50:c5:bc
[ 668.808253] perf interrupt took too long (10013 > 10000), lowering
kernel.perf_event_max_sample_rate to 12500
** Model information
not available
** Loaded modules:
ctr
ccm
rfcomm
binfmt_misc
snd_hrtimer
snd_seq
snd_seq_device
irtty_sir
pci_stub
sir_dev
vboxpci(O)
irda
crc_ccitt
vboxnetadp(O)
slamr(PO)
uinput
vboxnetflt(O)
ungrab_winmodem(O)
vboxdrv(O)
bnep
ftdi_sio
usbserial
iptable_filter
ip_tables
x_tables
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
snd_hda_codec_realtek
snd_hda_codec_generic
i2c_isch
ecb
uvcvideo
wl(PO)
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
btusb
v4l2_common
eeepc_wmi
asus_wmi
arc4
bluetooth
videodev
media
6lowpan_iphc
iwldvm
coretemp
kvm_intel
snd_hda_intel
snd_hda_controller
mac80211
kvm
snd_hda_codec
snd_hwdep
snd_pcm
joydev
evdev
iwlwifi
snd_timer
serio_raw
cfg80211
snd
lpc_sch
mfd_core
gma500_gfx
drm_kms_helper
drm
i2c_algo_bit
i2c_core
shpchp
soundcore
battery
button
sparse_keymap
rfkill
video
ac
processor
wmi
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
psmouse
pata_sch
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
atl1c
usbcore
usb_common
thermal
thermal_sys
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether e0:cb:4e:3d:d0:70 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.89/24 brd 192.168.178.255 scope global dynamic eth0
valid_lft 374sec preferred_lft 374sec
inet6 fe80::e2cb:4eff:fe3d:d070/64 scope link
valid_lft forever preferred_lft forever
3: wlan5: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether c8:f7:33:4b:ae:e2 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlan5: 26371960 63976 0 0 0 0 0 0 4706800
35600 0 0 0 0 0 0
lo: 390223 1520 0 0 0 0 0 0 390223
1520 0 0 0 0 0 0
eth0: 2846295 4900 0 0 0 0 0 372 429487
2747 0 0 0 0 1 0
*** Protocol statistics:
Ip:
44209 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
43418 incoming packets delivered
38765 requests sent out
48 outgoing packets dropped
35 dropped because of missing route
2 fragments dropped after timeout
40 reassemblies required
19 packets reassembled ok
2 packet reassembles failed
Icmp:
106 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 106
104 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 104
IcmpMsg:
InType3: 106
OutType3: 104
Tcp:
536 active connections openings
363 passive connection openings
64 failed connection attempts
259 connection resets received
7 connections established
34742 segments received
34582 segments send out
8 segments retransmited
3 bad segments received.
112 resets sent
Udp:
7987 packets received
104 packets to unknown port received.
0 packet receive errors
4131 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
33 resets received for embryonic SYN_RECV sockets
7 packets pruned from receive queue because of socket buffer overrun
415 TCP sockets finished time wait in fast timer
506 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 42 times
2 packets directly queued to recvmsg prequeue.
5 bytes directly received in process context from prequeue
26248 packet headers predicted
2648 acknowledgments not containing data payload received
772 predicted acknowledgments
4 congestion windows recovered without slow start after partial ack
4 other TCP timeouts
TCPLossProbes: 5
TCPLossProbeRecovery: 2
69 packets collapsed in receive queue due to low socket buffer
42 DSACKs sent for old packets
3 DSACKs received
20 connections reset due to unexpected data
32 connections reset due to early user close
2 connections aborted due to timeout
1 times unabled to send RST due to no memory
TCPDSACKIgnoredNoUndo: 2
TCPDeferAcceptDrop: 39
TCPRcvCoalesce: 2504
TCPOFOQueue: 415
TCPChallengeACK: 3
TCPSYNChallenge: 3
TCPSpuriousRtxHostQueues: 6
TCPAutoCorking: 214
TCPWantZeroWindowAdv: 5
TCPSynRetrans: 4
TCPOrigDataSent: 3532
IpExt:
InMcastPkts: 6418
OutMcastPkts: 300
InBcastPkts: 346
InOctets: 27219227
OutOctets: 4208052
InMcastOctets: 1726978
OutMcastOctets: 66551
InBcastOctets: 125105
InNoECTPkts: 51003
InECT1Pkts: 154
InECT0Pkts: 17
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH
Poulsbo) [8086:8100] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller
Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f3f80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at c880 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Region 3: Memory at f3f40000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH
Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f3f38000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 80000000-801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f4000000-fbefffff
Prefetchable memory behind bridge: cc000000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at b880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f3f37c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: lpc_sch
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH
Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: pata_sch
01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235
[8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at fbefe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet
[1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:14e5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e880 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 002 Device 003: ID 13d3:5071 IMC Networks
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0b05:b700 ASUSTek Computer, Inc. Broadcom Bluetooth 2.1
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.11
APT prefers oldoldstable
APT policy: (500, 'oldoldstable')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-10-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-10-686-pae depends on:
ii debconf [debconf-2.0] 1.5.56+deb8u1
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u3
ii kmod 18-3
ii linux-base 4.5~deb8u1
Versions of packages linux-image-3.16.0-10-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3+deb8u1
ii libc6-i686 2.24-11+deb9u1
Versions of packages linux-image-3.16.0-10-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-5+deb8u2
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-10-686-pae is related to:
ii firmware-atheros 20161130-5~deb8u1
ii firmware-bnx2 20161130-5~deb8u1
ii firmware-bnx2x 20161130-5~deb8u1
ii firmware-brcm80211 20161130-5~deb8u1
ii firmware-intelwimax 20161130-5~deb8u1
ii firmware-ipw2x00 20161130-5~deb8u1
ii firmware-ivtv 20161130-5~deb8u1
ii firmware-iwlwifi 20161130-5~deb8u1
ii firmware-libertas 20161130-5~deb8u1
ii firmware-linux 20161130-5~deb8u1
ii firmware-linux-nonfree 20161130-5~deb8u1
ii firmware-misc-nonfree [firmware-ralink] 20161130-5~deb8u1
ii firmware-myricom 20161130-5~deb8u1
ii firmware-netxen 20161130-5~deb8u1
ii firmware-qlogic 20161130-5~deb8u1
ii firmware-ralink 20161130-5~deb8u1
ii firmware-realtek 20161130-5~deb8u1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-10-686-pae/postinst/depmod-error-initrd-3.16.0-10-686-pae:
false
linux-image-3.16.0-10-686-pae/prerm/removing-running-kernel-3.16.0-10-686-pae:
true
linux-image-3.16.0-10-686-pae/postinst/mips-initrd-3.16.0-10-686-pae:
--- End Message ---
signature.asc
