Your message dated Sun, 27 Nov 2022 09:52:48 +0100 (CET) with message-id <20221127085248.d8ac9be2...@eldamar.lan> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #926221, regarding linux-image-4.19.0-4-amd64: i8042 device not loaded for ps/2 keyboard to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 926221: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926221 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.19.28-2 Severity: important Dear Maintainer, * What led up to the situation? A fresh installation of buster. On about the 3 reboot of the fresh install the ps/2 keyboard was inactive on the console login. I have not seen this problem on jessie or stretch on the fresh installs of these versions a week ago on the same test box. * What exactly did you do (or not do) that was effective (or ineffective)? Plugged a usb keyboard then rebooted. * What was the outcome of this action? The usb keyboard operated correctly. The ps/2 keyboard operates correctly during the grub screen but is then inactive on the console login. The keyboard failure appears to be random. When the ps/2 keyboard is inactive /sys/devices/platform/i8042 does not exist. * What outcome did you expect instead? Expect ps/2 keyboard operation on each reboot, but the ps/2 keyboard seems to fail on one reboot out of five or six. The grub screen has correct ps/2 keyboard operation consistently, then when booting through to the cosole login, the ps/2 keyboard becomes inactive and the i8042 device does not exist. When plugged, the usb keyboard operates correctly each time. -- Package-specific info: ** Version: Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=/dev/mapper/vgBuster-lvBusterRoot ro quiet ** Not tainted ** Kernel log: [ 6.055661] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 6.125325] random: crng init done [ 7.419050] systemd[1]: Inserted module 'autofs4' [ 7.544582] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.562304] systemd[1]: Detected architecture x86-64. [ 7.572764] systemd[1]: Set hostname to <linda>. [ 9.777803] systemd[1]: Unnecessary job for /dev/mapper/vgBuster-lvBusterUsr was removed. [ 9.778286] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.778469] systemd[1]: Listening on udev Kernel Socket. [ 9.778668] systemd[1]: Listening on Journal Audit Socket. [ 9.780143] systemd[1]: Created slice system-getty.slice. [ 9.780247] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.780522] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.075597] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 10.111477] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 10.669333] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 10.669338] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_GPE.HWRE) (20180810/utaddress-213) [ 10.669343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.412153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 11.412165] ACPI: Power Button [PWRB] [ 11.412209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 11.412226] ACPI: Power Button [PWRF] [ 11.977000] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 12.119910] parport_pc 00:02: reported by Plug and Play ACPI [ 12.119975] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 12.187159] ppdev: user-space parallel port driver [ 12.216182] iTCO_vendor_support: vendor-support=0 [ 12.277228] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 12.277229] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 12.277230] RAPL PMU: hw unit of domain package 2^-16 Joules [ 12.277231] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 12.313231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 12.313272] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 12.313357] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.355272] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.355302] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 12.355329] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 12.956283] asus_wmi: ASUS WMI generic driver loaded [ 13.077383] asus_wmi: Initialization: 0x0 [ 13.077408] asus_wmi: BIOS WMI version: 0.9 [ 13.077445] asus_wmi: SFUN value: 0x0 [ 13.077748] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4 [ 13.078150] asus_wmi: Number of fans: 1 [ 14.985312] [drm] Replacing VGA console driver [ 14.985788] Console: switching to colour dummy device 80x25 [ 14.986777] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.986778] [drm] Driver supports precise vblank timestamp query. [ 14.987158] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 15.071343] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 15.071852] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.071946] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 15.096671] fbcon: inteldrmfb (fb0) is primary device [ 15.167843] Console: switching to colour frame buffer device 210x65 [ 15.190706] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 15.202551] kvm: disabled by bios [ 15.311829] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 15.752700] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 15.752703] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.752705] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 15.752706] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 15.752708] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 15.752709] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 15.752711] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 15.752712] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 15.752713] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 15.766254] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 15.766309] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 15.766354] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 15.771104] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.772593] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.922038] Adding 974844k swap on /dev/mapper/vg_linda_stretch-lv_swap. Priority:-2 extents:1 across:974844k FS [ 15.982824] intel_rapl: Found RAPL domain package [ 15.982827] intel_rapl: Found RAPL domain core [ 15.982828] intel_rapl: Found RAPL domain uncore [ 15.982832] intel_rapl: RAPL package 0 domain package locked by BIOS [ 18.383226] Adding 974844k swap on /dev/mapper/vgBuster-lvBusterSwap. Priority:-3 extents:1 across:974844k FS [ 18.728336] EXT4-fs (dm-3): mounting ext2 file system using the ext4 subsystem [ 19.385785] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null) [ 20.709623] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 20.917896] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 20.926257] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 21.927374] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 22.074589] systemd-journald[230]: Received request to flush runtime journal from PID 1 [ 26.588765] audit: type=1400 audit(1554194542.812:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=472 comm="apparmor_parser" [ 26.588769] audit: type=1400 audit(1554194542.812:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=472 comm="apparmor_parser" [ 26.590336] audit: type=1400 audit(1554194542.816:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=473 comm="apparmor_parser" [ 26.590339] audit: type=1400 audit(1554194542.816:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=473 comm="apparmor_parser" [ 26.590341] audit: type=1400 audit(1554194542.816:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=473 comm="apparmor_parser" [ 30.200063] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 30.200292] RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 30.379651] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 32.596149] r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 32.596159] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 67.198183] usb 2-1.6: new low-speed USB device number 4 using ehci-pci [ 67.321693] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 1.30 [ 67.321696] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 67.321699] usb 2-1.6: Product: HP Basic USB Keyboard [ 67.321701] usb 2-1.6: Manufacturer: CHICONY [ 67.331824] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:03F0:0024.0002/input/input11 [ 67.390395] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.6/input0 ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 0704 board_vendor: ASUSTeK Computer INC. board_name: P8H61-M LE board_version: Rev x.0x ** Loaded modules: intel_rapl snd_hda_codec_realtek x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_generic snd_hda_intel i915 snd_hda_codec kvm snd_hda_core snd_hwdep irqbypass crct10dif_pclmul drm_kms_helper snd_pcm eeepc_wmi crc32_pclmul asus_wmi snd_timer sparse_keymap rfkill ghash_clmulni_intel drm intel_cstate snd mei_me wmi_bmof intel_uncore sg wmi iTCO_wdt intel_rapl_perf soundcore iTCO_vendor_support ppdev parport_pc mei i2c_algo_bit evdev pcspkr parport pcc_cpufreq video button nct6775 hwmon_vid coretemp ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd glue_helper aes_x86_64 dm_mod sr_mod cdrom sd_mod hid_generic usbhid ata_generic hid ata_piix libata crc32c_intel lpc_ich scsi_mod i2c_i801 ehci_pci ehci_hcd usbcore r8169 realtek libphy usb_common ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug enp4s0 iface enp4s0 inet dhcp # This is an autoconfigured IPv6 interface iface enp4s0 inet6 auto ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 14:da:e9:b6:66:cd brd ff:ff:ff:ff:ff:ff inet 192.168.1.125/24 brd 192.168.1.255 scope global dynamic enp4s0 valid_lft 3121sec preferred_lft 3121sec inet6 2001:8003:7919:d700:16da:e9ff:feb6:66cd/64 scope global dynamic mngtmpaddr valid_lft 44246sec preferred_lft 44246sec inet6 fe80::16da:e9ff:feb6:66cd/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed enp4s0: 7563636 10496 0 0 0 0 0 13 1246753 8352 0 0 0 0 0 0 lo: 156 4 0 0 0 0 0 0 156 4 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 2911 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 2909 incoming packets delivered 3214 requests sent out 40 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 193 active connection openings 0 passive connection openings 0 failed connection attempts 1 connection resets received 22 connections established 9625 segments received 7733 segments sent out 0 segments retransmitted 0 bad segments received 93 resets sent Udp: 556 packets received 0 packets to unknown port received 0 packet receive errors 556 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 2 UdpLite: TcpExt: 88 TCP sockets finished time wait in fast timer 134 delayed acks sent Quick ack mode was activated 6 times 6752 packet headers predicted 1369 acknowledgments not containing data payload received 1125 predicted acknowledgments Detected reordering 77 times using SACK TCPDSACKOldSent: 3 TCPDSACKRecv: 7 22 connections reset due to unexpected data 1 connections reset due to early user close TCPDSACKIgnoredNoUndo: 7 TCPSackShiftFallback: 67 TCPRcvCoalesce: 2223 TCPAutoCorking: 69 TCPOrigDataSent: 2432 TCPKeepAlive: 428 TCPDelivered: 2519 IpExt: InMcastPkts: 6 OutMcastPkts: 8 InBcastPkts: 2 InOctets: 1244347 OutOctets: 331037 InMcastOctets: 1356 OutMcastOctets: 1436 InBcastOctets: 488 InNoECTPkts: 2972 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Subsystem: ASUSTeK Computer Inc. P8P67/P8H67 Series Motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: snb_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family Integrated Graphics Controller [1043:844d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 32 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 Region 0: Memory at fe407000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe406000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller [1043:8445] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 33 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 26 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 27 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 28 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 29 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe405000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05) Subsystem: ASUSTeK Computer Inc. H61 Express Chipset LPC Controller [1043:844d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller [8086:1c00] (rev 05) (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering]) Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 0-3) [1043:844d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at f110 [size=8] Region 1: I/O ports at f100 [size=4] Region 2: I/O ports at f0f0 [size=8] Region 3: I/O ports at f0e0 [size=4] Region 4: I/O ports at f0d0 [size=16] Region 5: I/O ports at f0c0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe404000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller [8086:1c08] (rev 05) (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: ASUSTeK Computer Inc. 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 4-5) [1043:844d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f070 [size=16] Region 5: I/O ports at f060 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at e000 [size=256] Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 01) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Bus: primary=06, secondary=07, subordinate=07, sec-latency=32 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> ** USB devices: Bus 002 Device 004: ID 03f0:0024 HP, Inc KU-0316 Keyboard Bus 002 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE=en_AU:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-4-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133 ii kmod 26-1 ii linux-base 4.5 Versions of packages linux-image-4.19.0-4-amd64 recommends: ii apparmor 2.13.2-9 ii firmware-linux-free 3.4 ii irqbalance 1.5.0-3 Versions of packages linux-image-4.19.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02+dfsg1-13 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-4-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20190114-1 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
