On Tue, Nov 15, 2005 at 11:29:27AM +0100, Joerg Morbitzer wrote: > > > Maximilian Attems wrote: > >On Tue, Nov 15, 2005 at 10:37:06AM +0100, Joerg Morbitzer wrote: > > > > > >>with linux-image-2.6.14-2-k7 my Logitech USB infrared mouse does not work > >>any > >>longer (the infrared light turns on though). During bootup I can see > >>these messages: > >> > >>kernel: psmouse.c: Failed to reset mouse on isa0060/serio1 > >>kernel: psmouse.c: Failed to enable mouse on isa0060/serio1 > >> > >>Full boot message can be found here: > >> > >>http://www.mistersixt.de/tmp/dmesg-2.6.14.txt > >> > >>With kernel 2.6.13-1-k7 it works like expected. > >> > >>Let me know if you need further information. > > > > > >please append dmesg of working 2.6.13, > >also lsmod after boot for both kernels. > > > >output of "cat /proc/bus/input/devices" would be cool to. > >(we might need more ;-) > > > > Sure, this is the kernel output of 2.6.13: > > http://www.mistersixt.de/tmp/dmesg-2.6.13.txt
please output of dmesg, it is a pain to diff syslog. after boot: dmesg > dmesg-2.6.13 > Here lsmod for both kernel versions: > > http://www.mistersixt.de/tmp/lsmod-2.6.13.txt > http://www.mistersixt.de/tmp/lsmod-2.6.14.txt > > And finally the input devices: > > http://www.mistersixt.de/tmp/cat-usb-device.txt for which kernel was that? i see an usb mouse there. also please _append_ the messages to your mail, instead of putting them to a temporary webdir, where they will disappear soonest. while we are it the appended output of he following cmd might help (for both kernels working and non working): cat /proc/ioports -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
