Package: src:linux
Version: 6.1.67-1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Updating the kernel
* What exactly did you do (or not do) that was effective (or
ineffective)?
Booting from old kernel
* What was the outcome of this action?
Notebook can't wake up from suspend when using noveau driver, but worse yet
the xserver doesn't even start when using Nvidia proprietary (error message
saying no display was found)
* What outcome did you expect instead?
I expect updating the kernel doesn't break functionality.
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 6.1.0-16-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP
PREEMPT_DYNAMIC Debian 6.1.67-1 (2023-12-12)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-16-amd64
root=UUID=50906476-3c38-4fac-ab46-38d8ca6b9dd5 ro acpi_backlight=video
nowatchdog libata.allow_tpm=1
** Not tainted
** Kernel log:
[ 7.330870] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.331146] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 7.356487] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
[ 7.392564] ACPI: button: Lid Switch [LID0]
[ 7.393013] ACPI: AC: AC Adapter [ADP0] (on-line)
[ 7.403757] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
[ 7.421153] ACPI: button: Sleep Button [SLPB]
[ 7.425107] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input13
[ 7.425323] ACPI: button: Power Button [PWRB]
[ 7.425503] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
[ 7.430812] ACPI: button: Power Button [PWRF]
[ 7.452498] at24 0-0050: supply vcc not found, using dummy regulator
[ 7.453934] at24 0-0050: 256 byte spd EEPROM, read-only
[ 7.454744] at24 0-0051: supply vcc not found, using dummy regulator
[ 7.456352] at24 0-0051: 256 byte spd EEPROM, read-only
[ 7.457463] at24 0-0053: supply vcc not found, using dummy regulator
[ 7.474495] at24 0-0053: 256 byte spd EEPROM, read-only
[ 7.508907] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 7.511009] iTCO_vendor_support: vendor-support=0
[ 7.526518] mc: Linux media interface: v0.10
[ 7.528097] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device
(Version=2, TCOBASE=0x0460)
[ 7.528576] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec
(nowayout=0)
[ 7.548311] Adding 3964924k swap on /dev/sda6. Priority:-2 extents:1
across:3964924k SSFS
[ 7.611599] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 7.612026] cfg80211: Loaded X.509 cert 'b...@debian.org:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 7.612427] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 7.612823] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.613701] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 7.613950] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 7.631031] random: crng init done
[ 7.678991] videodev: Linux video capture interface: v2.00
[ 7.684269] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms
ovfl timer
[ 7.684382] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 7.684468] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 7.684498] Intel(R) Wireless WiFi driver for Linux
[ 7.684930] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM
control
[ 7.688010] cryptd: max_cpu_qlen set to 1000
[ 7.700936] iwlwifi 0000:04:00.0: firmware: direct-loading firmware
iwlwifi-6000-4.ucode
[ 7.701178] iwlwifi 0000:04:00.0: loaded firmware version 9.221.4.1 build
25532 6000-4.ucode op_mode iwldvm
[ 7.708582] AVX version of gcm_enc/dec engaged.
[ 7.708721] AES CTR mode by8 optimization enabled
[ 7.725197] usb 3-1.6: Found UVC 1.00 device BisonCam, NB Pro (5986:0308)
[ 7.729530] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 7.729620] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.750030] input: BisonCam, NB Pro: BisonCam, NB as
/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input17
[ 7.750246] usbcore: registered new interface driver uvcvideo
[ 7.759394] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 7.759606] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 7.759786] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 7.759963] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 7.769309] snd_hda_codec_realtek hdaudioC0D0: ALC892: SKU not ready
0x598301f0
[ 7.769811] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.769931] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 7.770039] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 7.770148] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.770234] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 7.770322] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.770409] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 7.770496] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.770587] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.783965] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 7.784157] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 7.784337] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 7.784516] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 7.910375] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 7.910465] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 7.910549] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 7.910636] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Ultimate-N
6300 AGN, REV=0x74
[ 7.951891] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.958609] intel_rapl_common: Found RAPL domain package
[ 7.958697] intel_rapl_common: Found RAPL domain core
[ 7.958782] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 7.975268] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[ 8.154425] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota
mode: none.
[ 8.189357] audit: type=1400 audit(1702723510.492:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=533 comm="apparmor_parser"
[ 8.189994] audit: type=1400 audit(1702723510.492:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=527
comm="apparmor_parser"
[ 8.190311] audit: type=1400 audit(1702723510.492:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oosplash"
pid=532 comm="apparmor_parser"
[ 8.190735] audit: type=1400 audit(1702723510.492:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=528
comm="apparmor_parser"
[ 8.190894] audit: type=1400 audit(1702723510.492:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=528 comm="apparmor_parser"
[ 8.193104] audit: type=1400 audit(1702723510.496:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=531
comm="apparmor_parser"
[ 8.193265] audit: type=1400 audit(1702723510.496:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=531
comm="apparmor_parser"
[ 8.193415] audit: type=1400 audit(1702723510.496:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=531
comm="apparmor_parser"
[ 8.195075] audit: type=1400 audit(1702723510.496:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=537 comm="apparmor_parser"
[ 8.198189] audit: type=1400 audit(1702723510.500:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed"
pid=538 comm="apparmor_parser"
[ 8.607587] jme 0000:03:00.0 enp3s0f0: Link is down
[ 8.621878] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 8.873414] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 9.025904] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 9.277904] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 12.667852] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 12.922088] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 13.104521] wlp4s0: authenticate with a6:33:d7:df:59:fb
[ 13.141979] wlp4s0: send auth to a6:33:d7:df:59:fb (try 1/3)
[ 13.143305] wlp4s0: authenticated
[ 13.143766] wlp4s0: waiting for beacon from a6:33:d7:df:59:fb
[ 13.147074] wlp4s0: associate with a6:33:d7:df:59:fb (try 1/3)
[ 13.150416] wlp4s0: RX AssocResp from a6:33:d7:df:59:fb (capab=0x511
status=0 aid=9)
[ 13.156278] wlp4s0: associated
[ 13.249292] wlp4s0: Limiting TX power to 23 (23 - 0) dBm as advertised by
a6:33:d7:df:59:fb
[ 13.367611] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
** Model information
sys_vendor: CLEVO
product_name: P150HMx
product_version: Not Applicable
chassis_vendor: CLEVO
chassis_version: Not Applicable
bios_vendor: American Megatrends Inc.
bios_version: 4.6.4
board_vendor: CLEVO
board_name: P150HMx
board_version: Not Applicable
** Loaded modules:
ctr
ccm
binfmt_misc
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
iwldvm
kvm
irqbypass
mac80211
ghash_clmulni_intel
snd_hda_codec_realtek
sha512_ssse3
sha512_generic
sha256_ssse3
snd_hda_codec_generic
sha1_ssse3
snd_hda_codec_hdmi
ledtrig_audio
mei_hdcp
snd_hda_intel
snd_intel_dspcfg
snd_intel_sdw_acpi
uvcvideo
snd_hda_codec
libarc4
videobuf2_vmalloc
videobuf2_memops
aesni_intel
snd_hda_core
videobuf2_v4l2
crypto_simd
cryptd
videobuf2_common
snd_hwdep
rapl
iwlwifi
videodev
snd_pcm
intel_cstate
cfg80211
snd_timer
iTCO_wdt
mei_me
jmb38x_ms
snd
intel_pmc_bxt
iTCO_vendor_support
intel_uncore
mc
wmi_bmof
pcspkr
rfkill
watchdog
soundcore
mei
memstick
at24
ac
button
joydev
evdev
sg
serio_raw
firewire_sbp2
parport_pc
ppdev
drm
lp
parport
fuse
dm_mod
loop
efi_pstore
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
t10_pi
sr_mod
crc64_rocksoft
cdrom
crc64
crc_t10dif
crct10dif_generic
ahci
libahci
libata
xhci_pci
sdhci_pci
xhci_hcd
cqhci
ehci_pci
crct10dif_pclmul
firewire_ohci
ehci_hcd
jme
scsi_mod
sdhci
psmouse
firewire_core
i2c_i801
crct10dif_common
usbcore
crc32_pclmul
crc32c_intel
mmc_core
i2c_smbus
scsi_common
lpc_ich
crc_itu_t
mii
usb_common
video
battery
wmi
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: CLEVO/KAPOK Computer 2nd Generation Core Processor Family
DRAM Controller [1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Subsystem: CLEVO/KAPOK Computer Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: f4000000-f60fffff [size=33M] [32-bit]
Prefetchable memory behind bridge: e8000000-f3ffffff [size=192M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family MEI
Controller [1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 35
IOMMU group: 2
Region 0: Memory at f650a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family USB
Enhanced Host Controller [1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 3
Region 0: Memory at f6508000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family
High Definition Audio Controller [1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
IOMMU group: 4
Region 0: Memory at f6500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family PCI
Express Root Port 1 [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 5
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f6400000-f64fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family PCI
Express Root Port 2 [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 6
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: f6300000-f63fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family PCI
Express Root Port 3 [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
IOMMU group: 7
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f6200000-f62fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family PCI
Express Root Port 4 [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
IOMMU group: 8
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f6100000-f61fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family USB
Enhanced Host Controller [1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
IOMMU group: 9
Region 0: Memory at f6507000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset LPC
Controller [8086:1c49] (rev 05)
Subsystem: CLEVO/KAPOK Computer HM65 Express Chipset LPC Controller
[1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 10
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port Mobile SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family 6
port Mobile SATA AHCI Controller [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 34
IOMMU group: 10
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f6506000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: CLEVO/KAPOK Computer 6 Series/C200 Series Chipset Family
SMBus Controller [1558:5102]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
IOMMU group: 10
Region 0: Memory at f6505000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF116M [GeForce GT
560M] [10de:1251] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer GF116M [GeForce GT 560M] [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
IOMMU group: 1
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GF116 High Definition Audio
Controller [10de:0bee] (rev a1)
Subsystem: CLEVO/KAPOK Computer GF116 High Definition Audio Controller
[1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 1
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer uPD720200 USB 3.0 Host Controller
[1558:5102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 11
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express
Gigabit Ethernet Controller [197b:0250] (rev 05)
Subsystem: CLEVO/KAPOK Computer JMC250 PCI Express Gigabit Ethernet
Controller [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 38
IOMMU group: 12
Region 0: Memory at f6320000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d100 [size=128]
Region 3: I/O ports at d000 [size=256]
Region 4: Memory at f6310000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f6300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: jme
Kernel modules: jme
03:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2392] (rev 90)
Subsystem: CLEVO/KAPOK Computer SD/MMC Host Controller [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
IOMMU group: 12
Region 0: Memory at f6326000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
03:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host
Controller [197b:2391] (rev 90) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Standard SD Host Controller [1558:5102]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
IOMMU group: 12
Region 0: Memory at f6325000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci_pci
03:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller
[197b:2393] (rev 90)
Subsystem: CLEVO/KAPOK Computer MS Host Controller [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
IOMMU group: 12
Region 0: Memory at f6324000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms
04:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300
[8086:422b] (rev 35)
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN
[8086:1101]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
IOMMU group: 13
Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
05:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host
Controller [197b:2380] (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer IEEE 1394 Host Controller [1558:5102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
IOMMU group: 14
Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
** USB devices:
Bus 003 Device 004: ID 5986:0308 Bison Electronics Inc. BisonCam, NB Pro
Bus 003 Device 003: ID 147e:1001 Upek TCS5B Fingerprint sensor
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.1.0-16-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-16-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-16-amd64 recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-16-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-13+deb12u1
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-16-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20230210-5
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--
Andre
