Your message dated Thu, 7 Mar 2024 22:02:05 +0100
with message-id <zeortyvj0ymkr...@eldamar.lan>
and subject line Re: Bug#1064252: linux-image-6.1.0-17-amd64: 
CONFIG_SYSTEM_TRUSTED_KEYS="y" is in the default config "y"
has caused the Debian Bug report #1064252,
regarding linux-image-6.1.0-17-amd64: CONFIG_SYSTEM_TRUSTED_KEYS="y" is in the 
default config "y"
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
1064252: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1064252
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 6.1.69-1
Severity: serious
Tags: ftbfs
Justification: fails to build from source (but built successfully in the past)
X-Debbugs-Cc: foren...@wi.rr.com

In the default config-6.1.0-17-amd64, there is a line: 
CONFIG_SYSTEM_TRUSTED_KEYS="y"

It is impossible to change it from y in menuconfig. Then, it creates 'error no 
rule to make y.  

-- Package-specific info:
** Version:
Linux version 6.1.0-17-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP 
PREEMPT_DYNAMIC Debian 6.1.69-1 (2023-12-30)

** Command line:
BOOT_IMAGE=/vmlinuz-6.1.0-17-amd64 
root=UUID=b8970480-c02f-4e13-83ea-99242beaa8c1 ro quiet

** Not tainted

** Kernel log:
[850617.148769]  sda: unable to read partition table
[850617.148860] sd 6:0:0:0: [sda] Attached SCSI disk
[850617.204217] sd 6:0:0:0: [sda] Synchronizing SCSI cache
[850617.444223] sd 6:0:0:0: [sda] Synchronize Cache(10) failed: Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[850617.716182] usb 2-7.4: new high-speed USB device number 11 using xhci_hcd
[850617.888733] usb 2-7.4: New USB device found, idVendor=152d, idProduct=0562, 
bcdDevice= 2.09
[850617.888746] usb 2-7.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[850617.888748] usb 2-7.4: Product: SSK Storage
[850617.888750] usb 2-7.4: Manufacturer: SSK
[850617.888752] usb 2-7.4: SerialNumber: DD564198838B8
[850617.892008] scsi host6: uas
[850617.892602] scsi 6:0:0:0: Direct-Access     SSK                       0209 
PQ: 0 ANSI: 6
[850617.894762] sd 6:0:0:0: Attached scsi generic sg1 type 0
[850617.894982] sd 6:0:0:0: [sda] Spinning up disk...
[850618.428107] usb 2-7.4: USB disconnect, device number 11
[850618.924215] .ready
[850618.924291] sd 6:0:0:0: [sda] Read Capacity(16) failed: Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[850618.924296] sd 6:0:0:0: [sda] Sense not available.
[850618.924302] sd 6:0:0:0: [sda] Read Capacity(10) failed: Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[850618.924304] sd 6:0:0:0: [sda] Sense not available.
[850618.924314] sd 6:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[850618.924316] sd 6:0:0:0: [sda] 0-byte physical blocks
[850618.924321] sd 6:0:0:0: [sda] Write Protect is off
[850618.924324] sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00
[850618.924328] sd 6:0:0:0: [sda] Asking for cache data failed
[850618.924333] sd 6:0:0:0: [sda] Assuming drive cache: write through
[850618.924342] sd 6:0:0:0: [sda] Preferred minimum I/O size 4096 bytes not a 
multiple of physical block size (0 bytes)
[850618.924345] sd 6:0:0:0: [sda] Optimal transfer size 33553920 bytes not a 
multiple of physical block size (0 bytes)
[850618.924995] sd 6:0:0:0: [sda] Attached SCSI disk
[854882.880440] usb 2-7.3: USB disconnect, device number 5
[854884.327593] usb 2-7.3: new low-speed USB device number 12 using xhci_hcd
[854884.457279] usb 2-7.3: New USB device found, idVendor=047d, idProduct=1020, 
bcdDevice= 1.08
[854884.457289] usb 2-7.3: New USB device strings: Mfr=0, Product=1, 
SerialNumber=0
[854884.457292] usb 2-7.3: Product: Kensington Expert Mouse
[854884.463747] input: Kensington Expert Mouse as 
/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.3/2-7.3:1.0/0003:047D:1020.0004/input/input21
[854884.464101] hid-generic 0003:047D:1020.0004: input,hidraw2: USB HID v1.11 
Mouse [Kensington Expert Mouse] on usb-0000:00:14.0-7.3/input0
[860266.405755] audit: type=1400 audit(1707886801.612:37): apparmor="DENIED" 
operation="capable" profile="/usr/sbin/cupsd" pid=178977 comm="cupsd" 
capability=12  capname="net_admin"
[880247.840603] wlp4s0: Connection to AP 00:90:7f:4a:10:b1 lost
[880459.847171] wlp4s0: authenticate with 00:90:7f:4a:10:b1
[880459.850240] wlp4s0: send auth to 00:90:7f:4a:10:b1 (try 1/3)
[880459.879928] wlp4s0: authenticated
[880459.881486] wlp4s0: associate with 00:90:7f:4a:10:b1 (try 1/3)
[880459.888498] wlp4s0: RX AssocResp from 00:90:7f:4a:10:b1 (capab=0x511 
status=0 aid=1)
[880459.893044] wlp4s0: associated
[880459.970372] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[880460.156234] wlp4s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 
00:90:7f:4a:10:b1
[966628.811480] wlp4s0: Connection to AP 00:90:7f:4a:10:b1 lost
[966840.859629] wlp4s0: authenticate with 00:90:7f:4a:10:b1
[966840.862710] wlp4s0: send auth to 00:90:7f:4a:10:b1 (try 1/3)
[966840.891711] wlp4s0: authenticated
[966840.894718] wlp4s0: associate with 00:90:7f:4a:10:b1 (try 1/3)
[966840.898366] wlp4s0: RX AssocResp from 00:90:7f:4a:10:b1 (capab=0x511 
status=0 aid=1)
[966840.903409] wlp4s0: associated
[966840.943963] wlp4s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 
00:90:7f:4a:10:b1
[966840.973030] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[1053031.509002] wlp4s0: deauthenticated from 00:90:7f:4a:10:b1 (Reason: 
3=DEAUTH_LEAVING)
[1053245.065573] wlp4s0: authenticate with 00:90:7f:4a:10:b1
[1053245.068633] wlp4s0: send auth to 00:90:7f:4a:10:b1 (try 1/3)
[1053245.097818] wlp4s0: authenticated
[1053245.098345] wlp4s0: associate with 00:90:7f:4a:10:b1 (try 1/3)
[1053245.106029] wlp4s0: RX AssocResp from 00:90:7f:4a:10:b1 (capab=0x511 
status=0 aid=1)
[1053245.111329] wlp4s0: associated
[1053245.177387] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[1053245.386814] wlp4s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 
00:90:7f:4a:10:b1
[1139434.717874] wlp4s0: deauthenticated from 00:90:7f:4a:10:b1 (Reason: 
3=DEAUTH_LEAVING)
[1139648.176761] wlp4s0: authenticate with 00:90:7f:4a:10:b1
[1139648.180112] wlp4s0: send auth to 00:90:7f:4a:10:b1 (try 1/3)
[1139648.215415] wlp4s0: authenticated
[1139648.217672] wlp4s0: associate with 00:90:7f:4a:10:b1 (try 1/3)
[1139648.225588] wlp4s0: RX AssocResp from 00:90:7f:4a:10:b1 (capab=0x511 
status=0 aid=3)
[1139648.230674] wlp4s0: associated
[1139648.294406] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[1139648.490254] wlp4s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 
00:90:7f:4a:10:b1
[1206557.231320] systemd[1]: systemd 252.21-1~deb12u1 running in system mode 
(+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL 
+ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP 
+LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD 
-BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[1206557.231413] systemd[1]: Detected architecture x86-64.
[1206557.231480] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man 
kernel_lockdown.7
[1210895.930727] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[1210924.676603] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[1210924.681433] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[1210924.685580] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[1211140.944744] rfkill: input handler enabled
[1211310.377750] nouveau 0000:01:00.0: firmware: failed to load 
nouveau/nve4_fuc084 (-2)
[1211310.377758] nouveau 0000:01:00.0: firmware: failed to load 
nouveau/nve4_fuc084 (-2)
[1211310.377759] nouveau 0000:01:00.0: Direct firmware load for 
nouveau/nve4_fuc084 failed with error -2
[1211310.377765] nouveau 0000:01:00.0: firmware: failed to load 
nouveau/nve4_fuc084d (-2)
[1211310.377768] nouveau 0000:01:00.0: firmware: failed to load 
nouveau/nve4_fuc084d (-2)
[1211310.377769] nouveau 0000:01:00.0: Direct firmware load for 
nouveau/nve4_fuc084d failed with error -2
[1211310.377770] nouveau 0000:01:00.0: msvld: unable to load firmware data
[1211310.377772] nouveau 0000:01:00.0: msvld: init failed, -19
[1211311.656032] Lockdown: systemd-logind: hibernation is restricted; see man 
kernel_lockdown.7
[1211311.864650] rfkill: input handler disabled
[1225842.556264] wlp4s0: Connection to AP 00:90:7f:4a:10:b1 lost
[1226054.457695] wlp4s0: authenticate with 00:90:7f:4a:10:b1
[1226054.460896] wlp4s0: send auth to 00:90:7f:4a:10:b1 (try 1/3)
[1226054.489378] wlp4s0: authenticated
[1226054.490445] wlp4s0: associate with 00:90:7f:4a:10:b1 (try 1/3)
[1226054.493530] wlp4s0: RX AssocResp from 00:90:7f:4a:10:b1 (capab=0x511 
status=0 aid=1)
[1226054.498178] wlp4s0: associated
[1226054.559021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[1226054.593096] wlp4s0: Limiting TX power to 21 (24 - 3) dBm as advertised by 
00:90:7f:4a:10:b1

** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 3503
board_vendor: ASUSTeK COMPUTER INC.
board_name: MAXIMUS VII RANGER
board_version: Rev 1.xx

** Loaded modules:
xt_addrtype
xt_nat
wireguard
libchacha20poly1305
chacha_x86_64
poly1305_x86_64
curve25519_x86_64
libcurve25519_generic
libchacha
ip6_udp_tunnel
udp_tunnel
xfs
nvme_fabrics
ctr
ccm
nft_chain_nat
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
ip6t_REJECT
nf_reject_ipv6
ipt_REJECT
nf_reject_ipv4
xt_multiport
xt_cgroup
xt_mark
xt_owner
xt_tcpudp
nft_compat
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
nf_tables
libcrc32c
nfnetlink
qrtr
cpufreq_userspace
cpufreq_powersave
cpufreq_ondemand
cpufreq_conservative
iwlmvm
binfmt_misc
intel_rapl_msr
intel_rapl_common
mac80211
x86_pkg_temp_thermal
intel_powerclamp
ghash_clmulni_intel
sha512_ssse3
snd_hda_codec_realtek
sha512_generic
sha256_ssse3
sha1_ssse3
snd_hda_codec_generic
libarc4
snd_hda_codec_hdmi
iwlwifi
nls_ascii
snd_hda_intel
nls_cp437
aesni_intel
snd_intel_dspcfg
vfat
crypto_simd
snd_intel_sdw_acpi
fat
cryptd
cfg80211
snd_hda_codec
sd_mod
rapl
snd_hda_core
eeepc_wmi
asus_wmi
snd_hwdep
intel_cstate
snd_pcm
battery
iTCO_wdt
platform_profile
snd_timer
intel_pmc_bxt
sparse_keymap
iTCO_vendor_support
uas
ledtrig_audio
snd
intel_uncore
wmi_bmof
at24
usb_storage
pcspkr
watchdog
rfkill
soundcore
pktcdvd
acpi_pad
sg
evdev
nct6775
nct6775_core
hwmon_vid
coretemp
msr
parport_pc
ppdev
lp
parport
fuse
dm_mod
loop
efi_pstore
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
nouveau
i2c_algo_bit
drm_display_helper
sr_mod
cdrom
cec
rc_core
drm_ttm_helper
ahci
ttm
libahci
libata
drm_kms_helper
xhci_pci
nvme
ehci_pci
xhci_hcd
ehci_hcd
scsi_mod
nvme_core
drm
mxm_wmi
usbcore
t10_pi
crc32_pclmul
crc32c_intel
scsi_common
lpc_ich
i2c_i801
crc64_rocksoft
crc64
i2c_smbus
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
usb_common
fan
video
wmi
button

** Network interface configuration:
*** /etc/network/interfaces:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
group default qlen 1000
    link/ether 84:1b:77:fa:85:70 brd ff:ff:ff:ff:ff:ff
    inet 192.168.115.9/24 brd 192.168.115.255 scope global dynamic 
noprefixroute wlp4s0
       valid_lft 21029sec preferred_lft 21029sec
    inet6 fe80::9443:8350:659d:363b/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
38: wgpia0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state 
UNKNOWN group default qlen 1000
    link/none 
    inet 10.14.147.96/32 scope global wgpia0
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo: 372109800  407656    0    0    0     0          0         0 372109800  
407656    0    0    0     0       0          0
wlp4s0: 171281812849 116584283    0   14    0     0          0         0 
2445004442 13649206    0    0    0     0       0          0
wgpia0: 19698328   25721    0    0    0     0          0         0  3217416   
21065    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    170771306 total packets received
    23 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    170771281 incoming packets delivered
    27451286 requests sent out
    15204 outgoing packets dropped
    2074 dropped because of missing route
    1 outgoing packets fragmented ok
    2 fragments created
Icmp:
    36143 ICMP messages received
    5915 input ICMP message failed
    ICMP input histogram:
        destination unreachable: 14987
        echo requests: 2
        echo replies: 21154
    48135 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 16567
        echo requests: 31566
        echo replies: 2
IcmpMsg:
        InType0: 21154
        InType3: 14987
        InType8: 2
        OutType0: 2
        OutType3: 16567
        OutType8: 31566
Tcp:
    54452 active connection openings
    14300 passive connection openings
    88 failed connection attempts
    479 connection resets received
    2 connections established
    52355693 segments received
    13544815 segments sent out
    6031 segments retransmitted
    42 bad segments received
    14070 resets sent
Udp:
    118327053 packets received
    6182 packets to unknown port received
    24715 packet receive errors
    349879 packets sent
    24715 receive buffer errors
    1 send buffer errors
    IgnoredMulti: 21469
UdpLite:
TcpExt:
    7236 packets pruned from receive queue because of socket buffer overrun
    1 ICMP packets dropped because they were out-of-window
    31636 TCP sockets finished time wait in fast timer
    18 packets rejected in established connections because of timestamp
    80774 delayed acks sent
    79 delayed acks further delayed because of locked socket
    Quick ack mode was activated 13926 times
    3464769 packet headers predicted
    313513 acknowledgments not containing data payload received
    347333 predicted acknowledgments
    TCPSackRecovery: 345
    Detected reordering 100 times using SACK
    Detected reordering 2 times using time stamp
    1 congestion windows partially recovered using Hoe heuristic
    TCPDSACKUndo: 21
    9 congestion windows recovered without slow start after partial ack
    TCPLostRetransmit: 3408
    TCPSackFailures: 10
    10 timeouts in loss state
    369 fast retransmits
    46 retransmits in slow start
    TCPTimeouts: 4858
    TCPLossProbes: 1172
    TCPLossProbeRecovery: 262
    TCPSackRecoveryFail: 43
    1657414 packets collapsed in receive queue due to low socket buffer
    TCPBacklogCoalesce: 8414
    TCPDSACKOldSent: 13936
    TCPDSACKOfoSent: 10
    TCPDSACKRecv: 146
    TCPDSACKOfoRecv: 1
    3425 connections reset due to unexpected data
    274 connections reset due to early user close
    235 connections aborted due to timeout
    6 times unable to send RST due to no memory
    TCPDSACKIgnoredNoUndo: 66
    TCPSackShifted: 153
    TCPSackMerged: 405
    TCPSackShiftFallback: 699
    TCPBacklogDrop: 38
    TCPRetransFail: 7
    TCPRcvCoalesce: 495355
    TCPOFOQueue: 177077
    TCPOFOMerge: 10
    TCPChallengeACK: 42
    TCPSYNChallenge: 42
    TCPSpuriousRtxHostQueues: 142
    TCPAutoCorking: 186268
    TCPFromZeroWindowAdv: 121
    TCPToZeroWindowAdv: 121
    TCPWantZeroWindowAdv: 2492
    TCPSynRetrans: 2091
    TCPOrigDataSent: 1205340
    TCPHystartTrainDetect: 1
    TCPHystartTrainCwnd: 18
    TCPHystartDelayDetect: 31
    TCPHystartDelayCwnd: 1885
    TCPACKSkippedPAWS: 1
    TCPACKSkippedSeq: 968
    TCPWinProbe: 35
    TCPKeepAlive: 26780
    TCPDelivered: 1243995
    TCPAckCompressed: 153774
    TcpTimeoutRehash: 4715
    TcpDuplicateDataRehash: 660
    TCPDSACKRecvSegs: 147
IpExt:
    InMcastPkts: 874
    OutMcastPkts: 891
    InBcastPkts: 21470
    OutBcastPkts: 2
    InOctets: 329337531629
    OutOctets: 3354820505
    InMcastOctets: 101360
    OutMcastOctets: 102088
    InBcastOctets: 821299
    OutBcastOctets: 2251
    InNoECTPkts: 233320996
    InECT1Pkts: 274
MPTcpExt:


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM 
Controller [8086:0c00] (rev 06)
        Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller 
[1043:8534]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: hsw_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core 
Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal 
decode])
        Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor 
PCI Express x16 Controller [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: e000-efff [size=4K] [16-bit]
        Memory behind bridge: f6000000-f70fffff [size=17M] [32-bit]
        Prefetchable memory behind bridge: e0000000-f1ffffff [size=288M] 
[32-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core 
Processor PCI Express x8 Controller [8086:0c05] (rev 06) (prog-if 00 [Normal 
decode])
        Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor 
PCI Express x8 Controller [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 25
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: f7400000-f74fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:14.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB 
xHCI Controller [8086:8cb1] (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB xHCI 
Controller [1043:8534]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 53
        Region 0: Memory at f7500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:1a.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB 
EHCI Controller #2 [8086:8cad] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI 
Controller [1043:8534]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f7517000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 9 Series Chipset Family HD Audio 
Controller [8086:8ca0]
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family HD Audio 
Controller [1043:8602]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 64
        Region 0: Memory at f7510000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 1 [8086:8c90] (rev d0) (prog-if 00 [Normal decode])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family PCI Express 
Root Port 1 [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 26
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 4 [8086:8c96] (rev d0) (prog-if 00 [Normal decode])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family PCI Express 
Root Port 4 [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 27
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: f7300000-f73fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI 
Express Root Port 5 [8086:8c98] (rev d0) (prog-if 00 [Normal decode])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family PCI Express 
Root Port 5 [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 28
        Bus: primary=00, secondary=05, subordinate=0a, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: f7100000-f72fffff [size=2M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB 
EHCI Controller #1 [8086:8ca6] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family USB EHCI 
Controller [1043:8534]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7516000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Z97 Chipset LPC Controller 
[8086:8cc4]
        Subsystem: ASUSTeK Computer Inc. Z97 Chipset LPC Controller [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 9 Series Chipset Family SATA 
Controller [AHCI Mode] [8086:8c82] (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SATA 
Controller [AHCI Mode] [1043:8534]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 62
        Region 0: I/O ports at f070 [size=8]
        Region 1: I/O ports at f060 [size=4]
        Region 2: I/O ports at f050 [size=8]
        Region 3: I/O ports at f040 [size=4]
        Region 4: I/O ports at f020 [size=32]
        Region 5: Memory at f7515000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 9 Series Chipset Family SMBus 
Controller [8086:8ca2]
        Subsystem: ASUSTeK Computer Inc. 9 Series Chipset Family SMBus 
Controller [1043:8534]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f7514000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f000 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104GL [Quadro 
K4200] [10de:11b4] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company GK104GL [Quadro K4200] [103c:1096]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 63
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at e000 [size=128]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau
        Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio Controller 
[10de:0e0a] (rev a1)
        Subsystem: Hewlett-Packard Company GK104 HDMI Audio Controller 
[103c:1096]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe 
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
        Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme

04:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200 [8086:2723] 
(rev 1a)
        Subsystem: Intel Corporation Wi-Fi 6 AX200NGW [8086:0084]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f7300000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi

05:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM2824 PCIe Gen3 Packet 
Switch [1b21:2824] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 29
        Bus: primary=05, secondary=06, subordinate=0a, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: f7100000-f72fffff [size=2M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

06:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM2824 PCIe Gen3 Packet 
Switch [1b21:2824] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 30
        Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: f7200000-f72fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

06:04.0 PCI bridge [0604]: ASMedia Technology Inc. ASM2824 PCIe Gen3 Packet 
Switch [1b21:2824] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 31
        Bus: primary=06, secondary=08, subordinate=08, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

06:08.0 PCI bridge [0604]: ASMedia Technology Inc. ASM2824 PCIe Gen3 Packet 
Switch [1b21:2824] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 32
        Bus: primary=06, secondary=09, subordinate=09, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: f7100000-f71fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

06:0c.0 PCI bridge [0604]: ASMedia Technology Inc. ASM2824 PCIe Gen3 Packet 
Switch [1b21:2824] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 33
        Bus: primary=06, secondary=0a, subordinate=0a, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

07:00.0 Non-Volatile memory controller [0108]: Micron Technology Inc 2300 NVMe 
SSD [Santana] [1344:5405] (prog-if 02 [NVM Express])
        Subsystem: Micron Technology Inc 2300 NVMe SSD [Santana] [1344:0100]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7200000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme

09:00.0 Non-Volatile memory controller [0108]: Micron Technology Inc 2300 NVMe 
SSD [Santana] [1344:5405] (prog-if 02 [NVM Express])
        Subsystem: Micron Technology Inc 2300 NVMe SSD [Santana] [1344:0100]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme


** USB devices:
Bus 003 Device 002: ID 8087:8001 Intel Corp. Integrated Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 012: ID 047d:1020 Kensington Expert Mouse Trackball
Bus 002 Device 004: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 002 Device 003: ID 0f39:1085 TG3 Electronics Deck 108 Hassium Pro
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 12.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 
'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.1.0-17-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-17-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20221128-1
ii  linux-base                              4.9

Versions of packages linux-image-6.1.0-17-amd64 recommends:
ii  apparmor             3.0.8-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-17-amd64 suggests:
ii  debian-kernel-handbook  1.0.21
ii  grub-efi-amd64          2.06-13+deb12u1
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-17-amd64 is related to:
ii  firmware-amd-graphics     20230210-5
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20230210-5
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20230210-5
ii  firmware-misc-nonfree     20230210-5
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20230210-5
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message ---
Hi,

On Sun, Feb 18, 2024 at 10:21:13PM -0500, tomas k wrote:
> Package: src:linux
> Version: 6.1.69-1
> Severity: serious
> Tags: ftbfs
> Justification: fails to build from source (but built successfully in the past)
> X-Debbugs-Cc: foren...@wi.rr.com
> 
> In the default config-6.1.0-17-amd64, there is a line: 
> CONFIG_SYSTEM_TRUSTED_KEYS="y"
> 
> It is impossible to change it from y in menuconfig. Then, it creates 'error 
> no rule to make y.  

>From the help text of SYSTEM_TRUSTED_KEYS:

        string "Additional X.509 keys for default system keyring"
        depends on SYSTEM_TRUSTED_KEYRING
        help
          If set, this option should be the filename of a PEM-formatted file
          containing trusted X.509 certificates to be included in the default
          system keyring. Any certificate used for module signing is implicitly
          also trusted.

          NOTE: If you previously provided keys for the system keyring in the
          form of DER-encoded *.x509 files in the top-level build directory,
          those are no longer used. You will need to set this option instead.

So explicitly: If set, this option should be the filename of a
PEM-formatted file containing [...].

Regards,
Salvatore

--- End Message ---

Reply via email to