Your message dated Sat, 09 Mar 2024 19:10:10 +0000
with message-id <e1rj25c-006mjk...@fasolo.debian.org>
and subject line Bug#1065320: fixed in linux 6.7.9-1
has caused the Debian Bug report #1065320,
regarding linux-image-6.1.0-18-amd64: 6.1.0-18 kernel enters ACPI Error loop 
during boot & requires power cycle
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
1065320: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1065320
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 6.1.76-1
Severity: critical
Justification: breaks the whole system
X-Debbugs-Cc: leeejobsacco...@mail.co.uk

Dear Maintainer,

   * What led up to the situation?

   Trying to boot the system with the 6.1.0-18 kernel

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

   I tried adding 'boot_delay=1000' boot option to slow the console
   scroll rate, to enable better recording of the error messages.

   I tried rebooting the previous 6.1.0-17 kernel.

   * What was the outcome of this action?

   After adding the 'boot_delay=1000' option the boot process
   progressed no further than "Loading initial ramdisk ..."
   (left for several minutes - required power cycle).

   The system boots sucessfully on the previous 6.1.0-17 kernel

   * What outcome did you expect instead?

   I expected the system to successfully boot.

   * Additional observations

   This system also normally includes 'hpet=disable' and
   'acpi_enforce_resources=lax' boot options but removing these
   made no difference.

   Although I was not able to boot the system with the
   'boot_delay=1000' option and obtain clear photographs of the
   console output - the ones I've attached suffer from
   'overprinting' - it does seem clear that ACPI errors are
   being reported.

   There appear to be two distinct phases to this problem.
   Initially, ACPI seems to be reporting errors for "GPE", as
   shown in the first attached photograph, but after ~10 seconds
   or so, ACPI then switches to continuously reporting an error
   for PM_TIMER, as shown in the second attached photograph. At
   this point a power cycle is required.

   Purging and reinstalling the package made no difference. Atm,
   only three kernels are installed on this system but I have
   had more in the past as I normally compile my own kernels
   from the corresponding Debian source package. My own 6.1.76-1
   kernel also suffers from the same problem, whereas my own
   6.1.69-1 kernel boots and runs Ok.

   Comparing the kernel configs for 6.1.0-17 and 6.1.0-18
   showed just one functional change - an additional
   Compile-time checks and compiler option, which did not seem
   relevant to this problem.


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: E203NA
product_version: 1.0       
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0       
bios_vendor: American Megatrends Inc.
bios_version: E203NA.312
board_vendor: ASUSTeK COMPUTER INC.
board_name: E203NA
board_version: 1.0       

** Network interface configuration:
*** /etc/network/interfaces:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series Host Bridge [8086:5af0] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Host Bridge [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 1

00:00.1 Signal processing controller [1180]: Intel Corporation Device 
[8086:5a8c] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Device [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin B routed to IRQ 24
        IOMMU group: 1
        Region 0: Memory at 91310000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: proc_thermal
        Kernel modules: processor_thermal_device_pci_legacy

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 500 
[8086:5a85] (rev 0b) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. HD Graphics 500 [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 125
        IOMMU group: 0
        Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+ FLReset+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00018  Data: 0000
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] Process Address Space ID (PASID)
                PASIDCap: Exec+ Priv-, Max PASID Width: 14
                PASIDCtl: Enable- Exec- Priv-
        Capabilities: [200 v1] Address Translation Service (ATS)
                ATSCap: Invalidate Queue Depth: 00
                ATSCtl: Enable-, Smallest Translation Unit: 00
        Capabilities: [300 v1] Page Request Interface (PRI)
                PRICtl: Enable- Reset-
                PRISta: RF- UPRGI- Stopped-
                Page Request Capacity: 00008000, Page Request Allocation: 
00000000
        Kernel driver in use: i915
        Kernel modules: i915

00:0e.0 Audio device [0403]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series Audio Cluster [8086:5a98] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Audio Cluster [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 127
        IOMMU group: 2
        Region 0: Memory at 91318000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at 91200000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [80] Vendor Specific Information: Len=14 <?>
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00398  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE- FLReset+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci_intel_apl

00:0f.0 Communication controller [0780]: Intel Corporation Celeron 
N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine [8086:5a9a] (rev 
0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Trusted Execution Engine [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 126
        IOMMU group: 3
        Region 0: Memory at 91327000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00338  Data: 0000
        Capabilities: [a4] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:12.0 SATA controller [0106]: Intel Corporation Celeron N3350/Pentium 
N4200/Atom E3900 Series SATA AHCI Controller [8086:5ae3] (rev 0b) (prog-if 01 
[AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series SATA AHCI Controller [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 124
        IOMMU group: 4
        Region 0: Memory at 9131c000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at 91324000 (32-bit, non-prefetchable) [size=256]
        Region 2: I/O ports at f090 [size=8]
        Region 3: I/O ports at f080 [size=4]
        Region 4: I/O ports at f060 [size=32]
        Region 5: Memory at 91323000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee002f8  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Kernel driver in use: ahci
        Kernel modules: ahci

00:13.0 PCI bridge [0604]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series PCI Express Port A #2 [8086:5ad9] (rev fb) (prog-if 00 [Normal 
decode])
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series PCI Express Port A [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 122
        IOMMU group: 5
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: 91000000-911fffff [size=2M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #3, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- 
LTR+
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd+
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 
2Retimers- DRS-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00218  Data: 0000
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Celeron 
N3350/Pentium N4200/Atom E3900 Series PCI Express Port A [1043:1980]
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v0] Null
        Capabilities: [140 v1] Access Control Services
                ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- 
EgressCtrl- DirectTrans-
                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- 
EgressCtrl- DirectTrans-
        Capabilities: [150 v0] Null
        Capabilities: [200 v0] Null
        Kernel driver in use: pcieport

00:15.0 USB controller [0c03]: Intel Corporation Celeron N3350/Pentium 
N4200/Atom E3900 Series USB xHCI [8086:5aa8] (rev 0b) (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series USB xHCI [1043:201f]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 123
        IOMMU group: 6
        Region 0: Memory at 91300000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
                Address: 00000000fee002b8  Data: 0000
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:17.0 Signal processing controller [1180]: Intel Corporation Celeron 
N3350/Pentium N4200/Atom E3900 Series I2C Controller #5 [8086:5ab4] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series I2C Controller [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 31
        IOMMU group: 7
        Region 0: Memory at 91322000 (64-bit, non-prefetchable) [size=4K]
        Region 2: Memory at 91321000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci

00:1c.0 SD Host controller [0805]: Intel Corporation Celeron N3350/Pentium 
N4200/Atom E3900 Series eMMC Controller [8086:5acc] (rev 0b) (prog-if 01)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series eMMC Controller [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 39
        IOMMU group: 8
        Region 0: Memory at 91320000 (64-bit, non-prefetchable) [size=4K]
        Region 2: Memory at 9131f000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series Low Pin Count Interface [8086:5ae8] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Low Pin Count Interface [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 9
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.1 SMBus [0c05]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 
Series SMBus Controller [8086:5ad4] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series SMBus Controller [1043:1980]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ -2147483648
        IOMMU group: 9
        Region 0: Memory at 9131e000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless 
Network Adapter [168c:0042] (rev 31)
        Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter 
[1a3b:2a51]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 128
        IOMMU group: 5
        Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
                Address: fee003b8  Data: 0000
                Masking: 000000fe  Pending: 00000000
        Capabilities: [70] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 10W
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <4us, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+ 
NROPrPrP- LTR+
                         10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 
10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCap2: Supported Link Speeds: 2.5GT/s, Crosslink- Retimer- 
2Retimers- DRS-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP+ Rollover+ Timeout+ 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [148 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [168 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Capabilities: [178 v1] Latency Tolerance Reporting
                Max snoop latency: 3145728ns
                Max no snoop latency: 3145728ns
        Capabilities: [180 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ 
L1_PM_Substates+
                          PortCommonModeRestoreTime=50us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: ath10k_pci
        Kernel modules: ath10k_pci


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b54b Chicony Electronics Co., Ltd USB2.0 VGA UVC 
WebCam
Bus 001 Device 002: ID 13d3:3501 IMC Networks 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 12.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.1.0-17-amd64 (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1), LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-18-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20221128-1
ii  linux-base                              4.9

Versions of packages linux-image-6.1.0-18-amd64 recommends:
ii  apparmor             3.0.8-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-18-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.06-13+deb12u1
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-18-amd64 is related to:
ii  firmware-amd-graphics     20230210-5
ii  firmware-atheros          20230210-5
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20230210-5
ii  firmware-misc-nonfree     20230210-5
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 6.7.9-1
Done: Salvatore Bonaccorso <car...@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 1065...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <car...@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Fri, 08 Mar 2024 21:55:53 +0100
Source: linux
Architecture: source
Version: 6.7.9-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <car...@debian.org>
Closes: 1065320
Changes:
 linux (6.7.9-1) unstable; urgency=medium
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.7.8
     https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.7.9
     - mtd: spinand: gigadevice: Fix the get ecc status issue
     - ice: fix connection state of DPLL and out pin
     - ice: fix dpll input pin phase_adjust value updates
     - ice: fix dpll and dpll_pin data access on PF reset
     - ice: fix dpll periodic work data updates on PF reset
     - ice: fix pin phase adjust updates on PF reset
     - spi: cadence-qspi: fix pointer reference in runtime PM hooks
     - spi: cadence-qspi: remove system-wide suspend helper calls from runtime 
PM
       hooks
     - netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter
     - netlink: add nla be16/32 types to minlen array
     - net: ip_tunnel: prevent perpetual headroom growth
     - net: mctp: take ownership of skb in mctp_local_output
     - tun: Fix xdp_rxq_info's queue_index when detaching
     - [x86] cpufreq: intel_pstate: fix pstate limits enforcement for 
adjust_perf
       call back
     - net: veth: clear GRO when clearing XDP even when down
     - ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()
     - lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is
       detected
     - veth: try harder when allocating queue memory
     - net: usb: dm9601: fix wrong return value in dm9601_mdio_read
     - net: lan78xx: fix "softirq work is pending" error
     - uapi: in6: replace temporary label with rfc9486
     - stmmac: Clear variable when destroying workqueue
     - Bluetooth: hci_sync: Check the correct flag before starting a scan
     - Bluetooth: Avoid potential use-after-free in hci_error_reset
     - Bluetooth: hci_sync: Fix accept_list when attempting to suspend
     - Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
     - Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
     - Bluetooth: Enforce validation on max value of connection interval
     - Bluetooth: qca: Fix wrong event type for patch config command
     - Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
     - Bluetooth: qca: Fix triggering coredump implementation
     - netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
     - netfilter: bridge: confirm multicast packets before passing them up the
       stack
     - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
     - igb: extend PTP timestamp adjustments to i211
     - net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
     - tls: decrement decrypt_pending if no async completion will be called
     - tls: fix peeking with sync+async decryption
     - tls: separate no-async decryption request handling from async
     - tls: fix use-after-free on failed backlog decryption
     - [riscv64] tlb: fix __p*d_free_tlb()
     - efi/capsule-loader: fix incorrect allocation size
     - power: supply: bq27xxx-i2c: Do not free non existing IRQ
     - [x86] ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
     - [arm64,armhf] gpu: host1x: Skip reset assert on Tegra186
     - [riscv64] mm: fix NOCACHE_THEAD does not set bit[61] correctly
     - [riscv64] Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
     - [x86] ASoC: cs35l56: cs35l56_component_remove() must clear
       cs35l56->component
     - [x86] ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
     - [x86] ASoC: cs35l56: Don't add the same register patch multiple times
     - [x86] ASoC: cs35l56: Fix for initializing ASP1 mixer registers
     - [x86] ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon
       revision
     - [x86] ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization
     - ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
     - [riscv64] Ignore V from the riscv,isa DT property on older T-Head CPUs
     - [arm64,armhf] drm/tegra: Remove existing framebuffer only if we support
       display
     - fbcon: always restore the old font data in fbcon_do_set_font()
     - afs: Fix endless loop in directory parsing
     - drm/amd/display: Prevent potential buffer overflow in map_hw_resources
     - drivers: perf: added capabilities for legacy PMU
     - drivers: perf: ctr_get_width function for legacy is not defined
     - Revert "riscv: mm: support Svnapot in huge vmap"
     - [riscv64] Fix pte_leaf_size() for NAPOT
     - [riscv64] Sparse-Memory/vmemmap out-of-bounds fix
     - btrfs: fix race between ordered extent completion and fiemap
     - drm/nouveau: keep DMA buffers required for suspend/resume
     - tomoyo: fix UAF write bug in tomoyo_write_control() (CVE-2024-26622)
     - ALSA: firewire-lib: fix to check cycle continuity
     - ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
     - ALSA: hda/realtek: Fix top speaker connection on Dell Inspiron 16 Plus
       7630
     - ALSA: hda/realtek: tas2781: enable subwoofer volume control
     - ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
     - ALSA: hda/realtek: fix mute/micmute LED For HP mt440
     - ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
     - Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
     - landlock: Fix asymmetric private inodes referring
     - gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
     - mm: cachestat: fix folio read-after-free in cache walk
     - [armhf] mtd: rawnand: marvell: fix layouts
     - wifi: nl80211: reject iftype change with mesh ID change
     - btrfs: fix double free of anonymous device after snapshot creation 
failure
     - btrfs: dev-replace: properly validate device names
     - btrfs: send: don't issue unnecessary zero writes for trailing hole
     - Revert "drm/amd/pm: resolve reboot exception for si oland"
     - drm/buddy: fix range bias
     - drm/amdgpu/pm: Fix the power1_min_cap value
     - drm/amd/display: Add monitor patch for specific eDP
     - [arm64] soc: qcom: pmic_glink: Fix boot when QRTR=m
     - [arm64] dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
     - [arm64] crypto: arm64/neonbs - fix out-of-bounds access on short input
     - [arm64] dmaengine: fsl-edma: correct calculation of 'nbytes' in 
multi-fifo
       scenario
     - [arm64] dmaengine: fsl-qdma: init irq after reg initialization
     - [arm64,armhf] mmc: mmci: stm32: fix DMA API overlapping mappings warning
     - mmc: core: Fix eMMC initialization with 1-bit bus connection
     - [arm64] mmc: sdhci-xenon: add timeout for PHY init complete
     - [arm64] mmc: sdhci-xenon: fix PHY init clock stability
     - ceph: switch to corrected encoding of max_xattr_size in mdsmap
     - [riscv64] add CALLER_ADDRx support
     - [riscv64] Fix enabling cbo.zero when running in M-mode
     - power: supply: mm8013: select REGMAP_I2C
     - kbuild: Add -Wa,--fatal-warnings to as-instr invocation
     - efivarfs: Request at most 512 bytes for variable names
     - pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal
     - pmdomain: qcom: rpmhpd: Fix enabled_corner aggregation
     - fprobe: Fix to allocate entry_data_size buffer with rethook instances
     - mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
     - mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
     - [x86] e820: Don't reserve SETUP_RNG_SEED in e820
     - [x86] cpu: Allow reducing x86_phys_bits during early_identify_cpu()
     - [x86] cpu/intel: Detect TME keyid bits before setting MTRR mask registers
     - mptcp: map v4 address to v6 when destroying subflow
     - mptcp: avoid printing warning once on client side
     - mptcp: push at DSS boundaries
     - mptcp: fix snd_wnd initialization for passive socket
     - mptcp: fix potential wake-up event loss
     - mptcp: fix double-free on socket dismantle
     - mptcp: fix possible deadlock in subflow diag
     - mfd: twl6030-irq: Revert to use of_match_device()
     - NFS: Fix data corruption caused by congestion.
     - af_unix: Fix task hung while purging oob_skb in GC.
     - af_unix: Drop oob_skb ref before purging queue in GC.
     - [x86] ASoC: cs35l56: fix reversed if statement in
       cs35l56_dspwait_asp1tx_put()
     - [arm64] phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use
       dashes
     - [arm64] phy: qcom-qmp-usb: fix v3 offsets data
     - [amd64] dmaengine: idxd: Remove shadow Event Log head stored in idxd
     - [amd64] dmaengine: idxd: Ensure safe user copy of completion record
     - [powerpc*] pseries/iommu: IOMMU table is not initialized for kdump over
       SR-IOV
     - [powerpc*] rtas: use correct function name for resetting TCE tables
     - gpio: 74x164: Enable output pins after registers are reset
     - gpiolib: Fix the error path order in gpiochip_add_data_with_key()
     - gpio: fix resource unwinding order in error path
     - block: define bvec_iter as __packed __aligned(4)
     - [x86] entry_64: Add VERW just before userspace transition
     - [x86] entry_32: Add VERW just before userspace transition
     - [x86] bugs: Use ALTERNATIVE() instead of mds_user_clear static key
     - [x86] KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
     - [x86] KVM/VMX: Move VERW closer to VMentry for MDS mitigation
     - drm/nouveau: don't fini scheduler before entity flush
 .
   [ Salvatore Bonaccorso ]
   * [x86] platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
     (Closes: #1065320)
Checksums-Sha1:
 44d7f65368f1354f70359aec14f5c9abd5ba759d 229550 linux_6.7.9-1.dsc
 57fc8fed736b377f16f5dd02bbc6393d05cdbb38 144155440 linux_6.7.9.orig.tar.xz
 30e8c0ce7367209380f1eb1c901f185707244d1b 1515932 linux_6.7.9-1.debian.tar.xz
 bfcc0cef289ab489bfa820acb57b70a412d038ef 7357 linux_6.7.9-1_source.buildinfo
Checksums-Sha256:
 f03e7a3c3c7008542400ae7b3c42607497cd6dd4f9d6ad525be474120d7989f2 229550 
linux_6.7.9-1.dsc
 51d66778e1fd671adc4bd280b59315ae48e423ddcb2fb9e6b81c49d4d15a57b9 144155440 
linux_6.7.9.orig.tar.xz
 24c937624c384f822e2d81170f1c3a152a3c53dbae9bde3a9dccf72dbfc66dca 1515932 
linux_6.7.9-1.debian.tar.xz
 a474672b85d6e69174238b4d2efae462954e542ca5616c692bf13740aea87111 7357 
linux_6.7.9-1_source.buildinfo
Files:
 1a6a61e28f94940763525c567ccbd911 229550 kernel optional linux_6.7.9-1.dsc
 a9897964c4159bc5162a297742e0a35b 144155440 kernel optional 
linux_6.7.9.orig.tar.xz
 b1c89678bd64a9aa7bbce882a5401347 1515932 kernel optional 
linux_6.7.9-1.debian.tar.xz
 fd85ee962f966853554e38ac651d65fd 7357 kernel optional 
linux_6.7.9-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=2Rvi
-----END PGP SIGNATURE-----

Attachment: pgp83q6vusp11.pgp
Description: PGP signature


--- End Message ---

Reply via email to