Your message dated Thu, 4 Jul 2024 21:25:50 +0200
with message-id <[email protected]>
and subject line Re: Bug#992131: R8169 CRASH! (rtl_rxtx_empty_cond == 0 (loop: 
42, delay: 100))
has caused the Debian Bug report #992131,
regarding linux-image-5.4.0-4-amd64: r8169 temporarely looses netwok 
connectivity
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
992131: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=992131
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 5.4.19-1
Severity: normal

Dear Maintainer,
Under network and/or cpu load, network connectivity is regularely lost for 
short amounts of time (~3 seconds).

This problems also happens with 
linux-image-5.5.0-rc5-amd64-unsigned_5.5~rc5-1~exp1_amd64.
This problem does not happen with linux-image-5.3.0-2-amd64.

Mar 04 15:51:39 tele-clu-03 kernel: ------------[ cut here ]------------
Mar 04 15:51:39 tele-clu-03 kernel: NETDEV WATCHDOG: enp1s0 (r8169): transmit 
queue 0 timed out
Mar 04 15:51:39 tele-clu-03 kernel: WARNING: CPU: 0 PID: 1503 at 
net/sched/sch_generic.c:447 dev_watchdog+0x248/0x250
Mar 04 15:51:39 tele-clu-03 kernel: Modules linked in: tun sctp ppp_deflate 
bsd_comp ppp_async crc_ccitt ppp_generic slhc sch_htb cls_cgroup bridge stp llc 
ext4 crc16 mbcache jbd2 dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio 
radeon nls_ascii nls_cp437 vfat fat kvm_amd ccp rng_core kvm efi_pstore ttm 
snd_hda_codec_realtek evdev snd_hda_codec_generic drm_kms_helper 
snd_hda_codec_hdmi ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec drm 
irqbypass serio_raw snd_hda_core efivars pcspkr k10temp sp5100_tco snd_hwdep 
watchdog snd_pcm sg snd_timer snd i2c_algo_bit soundcore button acpi_cpufreq 
efivarfs ip_tables x_tables autofs4 btrfs xor zstd_decompress zstd_compress 
raid6_pq libcrc32c crc32c_generic dm_mod sd_mod uas usb_storage ahci libahci 
ohci_pci libata ohci_hcd ehci_pci ehci_hcd usbcore scsi_mod psmouse r8169 
realtek libphy i2c_piix4 usb_common
Mar 04 15:51:39 tele-clu-03 kernel: CPU: 0 PID: 1503 Comm: pidof Not tainted 
5.4.0-4-amd64 #1 Debian 5.4.19-1
Mar 04 15:51:39 tele-clu-03 kernel: Hardware name: FUJITSU FUTRO S700/D3003-B1, 
BIOS V4.6.4.1 R1.19.0 for D3003-B1x 07/03/2013
Mar 04 15:51:39 tele-clu-03 kernel: RIP: 0010:dev_watchdog+0x248/0x250
Mar 04 15:51:39 tele-clu-03 kernel: Code: 85 c0 75 e5 eb 9f 4c 89 ef c6 05 58 
1d a8 00 01 e8 0d e4 fa ff 44 89 e1 4c 89 ee 48 c7 c7 f0 cc 52 85 48 89 c2 e8 
76 40 a0 ff <0f> 0b eb 80 0f 1f 40 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55
Mar 04 15:51:39 tele-clu-03 kernel: RSP: 0000:ffffa25280003e68 EFLAGS: 00010286
Mar 04 15:51:39 tele-clu-03 kernel: RAX: 0000000000000000 RBX: ffff898fb6076e00 
RCX: 0000000000000006
Mar 04 15:51:39 tele-clu-03 kernel: RDX: 0000000000000007 RSI: 0000000000000082 
RDI: ffff898ff9817680
Mar 04 15:51:39 tele-clu-03 kernel: RBP: ffff898ff3f6245c R08: 0000000000000373 
R09: 0000000000000004
Mar 04 15:51:39 tele-clu-03 kernel: R10: 0000000000000000 R11: 0000000000000001 
R12: 0000000000000000
Mar 04 15:51:39 tele-clu-03 kernel: R13: ffff898ff3f62000 R14: ffff898ff3f62480 
R15: 0000000000000001
Mar 04 15:51:39 tele-clu-03 kernel: FS:  00007f50dcc40540(0000) 
GS:ffff898ff9800000(0000) knlGS:0000000000000000
Mar 04 15:51:39 tele-clu-03 kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 
0000000080050033
Mar 04 15:51:39 tele-clu-03 kernel: CR2: 0000558bfde65018 CR3: 000000007650c000 
CR4: 00000000000006f0
Mar 04 15:51:39 tele-clu-03 kernel: Call Trace:
Mar 04 15:51:39 tele-clu-03 kernel:  <IRQ>
Mar 04 15:51:39 tele-clu-03 kernel:  ? pfifo_fast_enqueue+0x150/0x150
Mar 04 15:51:39 tele-clu-03 kernel:  call_timer_fn+0x2d/0x130
Mar 04 15:51:39 tele-clu-03 kernel:  __run_timers.part.0+0x16f/0x260
Mar 04 15:51:39 tele-clu-03 kernel:  ? timerqueue_add+0x96/0xb0
Mar 04 15:51:39 tele-clu-03 kernel:  ? enqueue_hrtimer+0x36/0x90
Mar 04 15:51:39 tele-clu-03 kernel:  run_timer_softirq+0x26/0x50
Mar 04 15:51:39 tele-clu-03 kernel:  __do_softirq+0xe6/0x2e9
Mar 04 15:51:39 tele-clu-03 kernel:  irq_exit+0xa6/0xb0
Mar 04 15:51:39 tele-clu-03 kernel:  smp_apic_timer_interrupt+0x76/0x130
Mar 04 15:51:39 tele-clu-03 kernel:  apic_timer_interrupt+0xf/0x20
Mar 04 15:51:39 tele-clu-03 kernel:  </IRQ>
Mar 04 15:51:39 tele-clu-03 kernel: RIP: 0033:0x7f50dcabd77a
Mar 04 15:51:39 tele-clu-03 kernel: Code: ff 0f 1f 80 00 00 00 00 0f b6 74 24 
13 48 39 cd 0f 85 e2 fe ff ff eb db 0f 1f 84 00 00 00 00 00 48 b9 ff ff ff ff 
ff ff ff 7f <48> 63 54 24 14 48 01 ca 48 39 c2 0f 82 14 ff ff ff 8b 4c 24 14 48
Mar 04 15:51:39 tele-clu-03 kernel: RSP: 002b:00007ffd49e5db10 EFLAGS: 00000246 
ORIG_RAX: ffffffffffffff13
Mar 04 15:51:39 tele-clu-03 kernel: RAX: 000000000000017f RBX: 0000000000000000 
RCX: 7fffffffffffffff
Mar 04 15:51:39 tele-clu-03 kernel: RDX: 000000000000000a RSI: 0000000000000000 
RDI: 0000558bfde5b2b6
Mar 04 15:51:39 tele-clu-03 kernel: RBP: 0000000000000000 R08: 1999999999999999 
R09: 0000000000000000
Mar 04 15:51:39 tele-clu-03 kernel: R10: 00007f50dcbecac0 R11: 00007f50dcbed3c0 
R12: 0000000000000000
Mar 04 15:51:39 tele-clu-03 kernel: R13: 0000558bfde5b2b3 R14: 0000000000000000 
R15: 000000000000000a
Mar 04 15:51:39 tele-clu-03 kernel: ---[ end trace c38142171e4748bf ]---


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: FUJITSU
product_name: FUTRO S700
product_version:
chassis_vendor: FUJITSU
chassis_version:
bios_vendor: FUJITSU // American Megatrends Inc.
bios_version: V4.6.4.1 R1.19.0 for D3003-B1x
board_vendor: FUJITSU
board_name: D3003-B1
board_version: S26361-D3003-B1

** Network interface configuration:
*** /etc/network/interfaces:
auto lo
iface lo inet loopback

iface enp1s0 inet manual
 mtu 9000

auto br0
iface br0 inet static
 mtu 9000
 bridge_ports enp1s0
 address 192.168.178.243
 netmask 255.255.255.0
 gateway 192.168.178.1


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h 
Processor Root Complex [1022:1510]
        DeviceName:  Realtek RTL8111E
        Subsystem: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root 
Complex [1022:1510]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] Wrestler [Radeon HD 6250] [1002:9805] (prog-if 00 [VGA controller])
        Subsystem: Fujitsu Technology Solutions Wrestler [Radeon HD 6250] 
[1734:11bd]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
        Region 1: I/O ports at f000 [size=256]
        Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag+ RBE+ FLReset-
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, 
NROPrPrP-, LTR-
                         10BitTagComp-, 10BitTagReq-, OBFF Not Supported, 
ExtFmt-, EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, 
OBFF Disabled
                         AtomicOpsCtl: ReqEn-
        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Kernel modules: radeon

00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler 
HDMI Audio [1002:1314]
        Subsystem: Fujitsu Technology Solutions Wrestler HDMI Audio [1734:11bd]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 26
        Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag+ RBE+ FLReset-
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, 
NROPrPrP-, LTR-
                         10BitTagComp-, 10BitTagReq-, OBFF Not Supported, 
ExtFmt-, EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, 
OBFF Disabled
                         AtomicOpsCtl: ReqEn-
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee01004  Data: 4029
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 14h 
Processor Root Port [1022:1512] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff [size=4K]
        Memory behind bridge: fe100000-fe2fffff [size=2M]
        Prefetchable memory behind bridge: 00000000fe000000-00000000fe0fffff 
[size=1M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag+ RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surprise-
                        Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCap: CRSVisible+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible+
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, 
NROPrPrP-, LTR-
                         10BitTagComp-, 10BitTagReq-, OBFF Not Supported, 
ExtFmt-, EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS-, LN System CLS Not Supported, TPHComp-, 
ExtTPHComp-, ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, 
OBFF Disabled ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee01004  Data: 4022
        Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Family 
14h Processor Root Port [1022:1234]
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 
Len=010 <?>
        Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 
[AHCI 1.0])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 SATA 
Controller [AHCI mode] [1734:11be]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at f140 [size=8]
        Region 1: I/O ports at f130 [size=4]
        Region 2: I/O ports at f120 [size=8]
        Region 3: I/O ports at f110 [size=4]
        Region 4: I/O ports at f100 [size=16]
        Region 5: Memory at feb4f000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [70] SATA HBA v1.0 InCfgSpace
        Capabilities: [a4] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ahci
        Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB OHCI0 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB EHCI 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB OHCI0 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB EHCI 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at feb4b000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus 
Controller [1002:4385] (rev 42)
        Subsystem: Fujitsu Technology Solutions SBx00 SMBus Controller 
[1734:11be]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Kernel driver in use: piix4_smbus
        Kernel modules: i2c_piix4, sp5100_tco

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 
Azalia (Intel HDA) [1002:4383] (rev 40)
        Subsystem: Fujitsu Technology Solutions SBx00 Azalia (Intel HDA) 
[1734:11bf]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 LPC host 
controller [1734:11be]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to 
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB OHCI2 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at feb4a000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB OHCI0 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at feb49000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci

00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] 
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Fujitsu Technology Solutions SB7x0/SB8x0/SB9x0 USB EHCI 
Controller [1734:11be]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at feb48000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 0 [1022:1700] (rev 43)
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 1 [1022:1701]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 2 [1022:1702]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 3 [1022:1703]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp
        Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 4 [1022:1704]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 6 [1022:1718]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 5 [1022:1716]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h 
Processor Function 7 [1022:1719]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
        Subsystem: Fujitsu Technology Solutions RTL8111/8168/8411 PCI Express 
Gigabit Ethernet Controller [1734:11c0]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at e000 [size=256]
        Region 2: Memory at fe004000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at fe000000 (64-bit, prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <512ns, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, 
NROPrPrP-, LTR-
                         10BitTagComp-, 10BitTagReq-, OBFF Not Supported, 
ExtFmt-, EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS-, TPHComp-, ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, 
OBFF Disabled
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Not readable
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- 
ECRCChkCap+ ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 01-00-00-00-04-00-00-01
        Kernel driver in use: r8169
        Kernel modules: r8169


** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 152d:2336 JMicron Technology Corp. / JMicron USA 
Technology Corp. Hard Disk Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 5.5.0-rc5-amd64 (SMP w/1 CPU core)
Kernel taint flags: TAINT_WARN, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.4.0-4-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.136
ii  kmod                                    27-1
ii  linux-base                              4.6

Versions of packages linux-image-5.4.0-4-amd64 recommends:
ii  apparmor             2.13.3-7
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.4.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.04-5
pn  linux-doc-5.4           <none>

Versions of packages linux-image-5.4.0-4-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20190717-2
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 6.9.7-1

Hi,

On Thu, Jul 04, 2024 at 08:55:04PM +0300, Vincas Dargis wrote:
> No longer happens in Sid with 6.9.7-1!

Ok thanks for letting us know!

Regards,
Salvatore

--- End Message ---

Reply via email to