Control: tags -1 + moreinfo Hi, On Fri, Jan 17, 2025 at 08:07:31PM +0100, Nicolas DEFFAYET wrote: > Package: linux-image > Version: 6.1.124-1 > Severity: critical > > Hardware: > Dell PowerEdge R520 (last BIOS version) > Dell PERC H710P (last firmware version) > > On physical machine: > Kernel 6.1.0-25 booted from xen works fine > Kernel 6.1.0-30 standalone works fine > Kernel 6.1.0-30 booted from xen is looping on megaraid_sas errors bellow. > > -> Not sure why and what changes between 6.1.0-25 and 6.1.0-30 generate this > issue. > > [ OK ] Started snmpd.service …anagement Protocol (SNMP) Daemon.. > [ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots. > [ OK ] Started xen.service - LSB: Xen daemons. > [ 47.849820] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 47.850296] megaraid_sas 0000:01:00.0: Error building command > [ 47.891183] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 47.891709] megaraid_sas 0000:01:00.0: Error building command > [ 47.910362] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 47.910780] megaraid_sas 0000:01:00.0: Error building command > [ 47.929331] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 47.929840] megaraid_sas 0000:01:00.0: Error building command > [ 47.970385] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 47.970810] megaraid_sas 0000:01:00.0: Error building command > [ 47.989357] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 47.989769] megaraid_sas 0000:01:00.0: Error building command > [ 48.023179] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.023643] megaraid_sas 0000:01:00.0: Error building command > [ 48.063207] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.063756] megaraid_sas 0000:01:00.0: Error building command > [ 48.095228] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.095999] megaraid_sas 0000:01:00.0: Error building command > [ 48.100825] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.101275] megaraid_sas 0000:01:00.0: Error building command > [ 48.139157] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.139208] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.139621] megaraid_sas 0000:01:00.0: Error building command > [ 48.139635] megaraid_sas 0000:01:00.0: Error building command > [ 48.183179] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.183188] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.183201] megaraid_sas 0000:01:00.0: Error building command > [ 48.183217] megaraid_sas 0000:01:00.0: Error building command > [ 48.219178] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.219629] megaraid_sas 0000:01:00.0: Error building command > [ 48.251184] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.251647] megaraid_sas 0000:01:00.0: Error building command > [ 48.283142] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.283669] megaraid_sas 0000:01:00.0: Error building command > [ 48.315138] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.315684] megaraid_sas 0000:01:00.0: Error building command > [ 48.347147] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.347684] megaraid_sas 0000:01:00.0: Error building command > [ 48.375203] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.375816] megaraid_sas 0000:01:00.0: Error building command > [ 48.407171] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.407721] megaraid_sas 0000:01:00.0: Error building command > [ 48.439138] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.439764] megaraid_sas 0000:01:00.0: Error building command > [ 48.475163] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.475163] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.475181] megaraid_sas 0000:01:00.0: Error building command > [ 48.475196] megaraid_sas 0000:01:00.0: Error building command > [ 48.507178] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.507178] megaraid_sas 0000:01:00.0: megasas_build_io_fusion 3259 > sge_count (-12) is out of range. Range is: 0-64 > [ 48.507183] megaraid_sas 0000:01:00.0: Error building command
Can you pinpoint more specifically where the issue has been introduced in the Debian released versions? The one with ABI 25 was 6.1.106-3, followed by 6.1.112-1, 6.1.115-1, 6.1.119-1, 6.1.123-1 and 6.1.124-1. Can you pin-point more which of the Debian released versions introduce the problem for you? (going a further step once you have that, could you bisect the upstream changes to pinpoint the commit upstream in the stable series which introduces the problem?) Regards, Salvatore
