--- Begin Message ---
Package: src:linux
Version: 4.9.303-1
Severity: important
Dear Maintainer,
The USB keyboard and mouse have been intermittently misbehaving on
Debian 9, 10, and 11 for over a year:
- Random mouse and/or keyboard event storms when I move the mouse.
- Repeating keys when no key is pressed.
- Keyboard and mouse stop functioning completely.
I have been discussing these symptoms on the debian-user mailing list:
https://www.mail-archive.com/debian-user@lists.debian.org/msg781396.html
Tonight, I was erasing USB flash drives. After a several drives, I
inserted another drive and it was not recognized. I removed it, and
tried again -- no help. I rebooted. I then continued. When I
insert a USB flash drive into a USB 3.0 port, both ports on that
chipset stopped working.
I do not have sudo configured. I have pasted dmesg(1) output at the
end of this bug report.
David
-- Package-specific info:
** Version:
Linux version 4.9.0-18-amd64 (debian-kernel@lists.debian.org) (gcc version
6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.303-1 (2022-03-07)
** Command line:
BOOT_IMAGE=/vmlinuz-4.9.0-18-amd64
root=UUID=9e15b950-3239-41ee-9f35-afb6e515d63a ro noresume
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: SWQ6710H.86A.0068.2017.0601.1423
board_vendor: Intel Corporation
board_name: DQ67SW
board_version: AAG12527-310
** Loaded modules:
uas
usb_storage
nls_utf8
cifs
sha256_ssse3
cmac
md4
des_generic
arc4
dns_resolver
fscache
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_hdmi
kvm_intel
kvm
snd_hda_codec_realtek
snd_hda_codec_generic
evdev
irqbypass
i915
intel_cstate
intel_uncore
intel_rapl_perf
lpc_ich
pcspkr
snd_hda_intel
serio_raw
video
mfd_core
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
drm_kms_helper
sg
snd_timer
snd
drm
soundcore
mei_me
i2c_algo_bit
mei
shpchp
button
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
mbcache
algif_skcipher
af_alg
dm_crypt
dm_mod
sr_mod
cdrom
sd_mod
hid_generic
usbhid
hid
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
ata_generic
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
psmouse
xhci_pci
ahci
firewire_ohci
ehci_pci
libahci
i2c_i801
xhci_hcd
i2c_smbus
firewire_core
ehci_hcd
crc_itu_t
libata
e1000e
usbcore
ptp
usb_common
pps_core
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Intel Corporation 2nd Generation Core Processor Family DRAM
Controller [8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Intel Corporation 2nd Generation Core Processor Family
Integrated Graphics Controller [8086:2008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family MEI
Controller [8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fbc2a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series Chipset
Family IDE-r Controller [8086:1c3c] (rev 04) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family IDE-r
Controller [8086:2008]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at f130 [size=8]
Region 1: I/O ports at f120 [size=4]
Region 2: I/O ports at f110 [size=8]
Region 3: I/O ports at f100 [size=4]
Region 4: I/O ports at f0f0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
Kernel modules: ata_generic
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series
Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family KT
Controller [8086:2008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at fbc29000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection [8086:1502] (rev 04)
Subsystem: Intel Corporation 82579LM Gigabit Network Connection
[8086:2008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fbc00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbc28000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family USB
Enhanced Host Controller [8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbc27000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Intel Corporation DQ67SW board [8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fbc20000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbb00000-fbbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fba00000-fbafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 29
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fb900000-fb9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family USB
Enhanced Host Controller [8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbc26000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fb800000-fb8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Q67 Express Chipset Family LPC
Controller [8086:1c4e] (rev 04)
Subsystem: Intel Corporation Q67 Express Chipset Family LPC Controller
[8086:2008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family SATA
AHCI Controller [8086:2008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 39
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at fbc25000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller [8086:2008]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbc24000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9128 PCIe
SATA 6 Gb/s RAID controller [1b4b:9128] (rev 20) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID
controller [1b4b:9128]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=4]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=4]
Region 4: I/O ports at e000 [size=32]
Region 5: Memory at fbb10000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fbb00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9128 PCIe
SATA 6 Gb/s RAID controller [1b4b:9128] (rev 20) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID
controller [1b4b:9128]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at fba10000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fba00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Intel Corporation uPD720200 USB 3.0 Host Controller
[8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
05:03.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a
Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Intel Corporation FW322/323 [TrueFire] 1394a Controller
[8086:2008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fb800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse
Adapter
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 9.13
APT prefers oldoldstable
APT policy: (500, 'oldoldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-18-amd64 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968), LANGUAGE=C
(charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-18-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-18-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-4.9.0-18-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5+deb9u2
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-18-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20161130-5
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
2022-04-29 00:05:19 root@tinkywinky ~
# dmesg
[ 0.000000] Linux version 4.9.0-18-amd64 (debian-kernel@lists.debian.org)
(gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.303-1
(2022-03-07)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-18-amd64
root=UUID=9e15b950-3239-41ee-9f35-afb6e515d63a ro noresume
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000ae854fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae855000-0x00000000ae8a3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae8a4000-0x00000000ae8acfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ae8ad000-0x00000000ae9a0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae9a1000-0x00000000ae9a2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae9a3000-0x00000000aebc1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aebc2000-0x00000000aebc2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aebc3000-0x00000000aebd2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aebd3000-0x00000000aebf0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aebf1000-0x00000000aec14fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aec15000-0x00000000aec57fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aec58000-0x00000000aee77fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aee78000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /DQ67SW, BIOS SWQ6710H.86A.0068.2017.0601.1423 06/01/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 23E600000 mask FFFE00000 uncachable
[ 0.000000] 6 base 23E800000 mask FFF800000 uncachable
[ 0.000000] 7 base 23F000000 mask FFF000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fda30-0x000fda3f] mapped at
[ffff8cab000fda30]
[ 0.000000] Base memory trampoline at [ffff8cab00091000] 91000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] RAMDISK: [mem 0x35a61000-0x36d27fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000AE8A4070 000064 (v01 INTEL DQ67SW
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AE8ABB90 0000F4 (v04 INTEL DQ67SW
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000AE8A4168 007A26 (v02 INTEL DQ67SW
00000016 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000AEBD7F80 000040
[ 0.000000] ACPI: APIC 0x00000000AE8ABC88 000092 (v03 INTEL DQ67SW
01072009 AMI 00010013)
[ 0.000000] ACPI: TCPA 0x00000000AE8ABD20 000032 (v02 INTEL DQ67SW
00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AE8ABD58 0001D6 (v01 INTEL DQ67SW
00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000AE8ABF30 00003C (v01 INTEL DQ67SW
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000AE8ABF70 000038 (v01 INTEL DQ67SW
01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000AE8ABFA8 0000A0 (v32 INTEL DQ67SW
00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x00000000AE8AC048 0000E8 (v01 INTEL DQ67SW
00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23e5f9000-0x23e5fdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023e5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000096fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000ae854fff]
[ 0.000000] node 0: [mem 0x00000000ae9a1000-0x00000000ae9a2fff]
[ 0.000000] node 0: [mem 0x00000000aebc2000-0x00000000aebc2fff]
[ 0.000000] node 0: [mem 0x00000000aee78000-0x00000000aeffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff]
[ 0.000000] On node 0 totalpages: 2018166
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 150 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11096 pages used for memmap
[ 0.000000] DMA32 zone: 710112 pages, LIFO batch:31
[ 0.000000] Normal zone: 20376 pages used for memmap
[ 0.000000] Normal zone: 1304064 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at
0x00000000afa00000-0x00000000bf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae855000-0xae8a3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae8a4000-0xae8acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae8ad000-0xae9a0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae9a3000-0xaebc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaebc3000-0xaebd2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaebd3000-0xaebf0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaebf1000-0xaec14fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaec15000-0xaec57fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaec58000-0xaee77fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xaf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] percpu: Embedded 40 pages/cpu s125912 r8192 d29736 u262144
[ 0.000000] pcpu-alloc: s125912 r8192 d29736 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1986480
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-18-amd64
root=UUID=9e15b950-3239-41ee-9f35-afb6e515d63a ro noresume
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7842880K/8072664K available (6310K kernel code, 1163K
rwdata, 2884K rodata, 1456K init, 664K bss, 229784K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2799.844 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5599.68 BogoMIPS (lpj=11199376)
[ 0.000119] pid_max: default: 32768 minimum: 301
[ 0.000178] ACPI: Core revision 20160831
[ 0.003650] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003769] Security Framework initialized
[ 0.003815] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003867] AppArmor: AppArmor disabled by boot time parameter
[ 0.004304] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.005738] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006392] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.006448] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.006744] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006790] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006841] mce: CPU supports 9 MCE banks
[ 0.006895] CPU0: Thermal monitoring enabled (TM1)
[ 0.006951] process: using mwait in idle threads
[ 0.006999] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.007045] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.007094] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.007156] Spectre V2 : Mitigation: Retpolines
[ 0.007201] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.007263] Speculative Store Bypass: Vulnerable
[ 0.007334] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.007775] Freeing SMP alternatives memory: 24K
[ 0.019243] ftrace: allocating 25424 entries in 100 pages
[ 0.040367] smpboot: Max logical packages: 2
[ 0.040420] DMAR: Host address width 36
[ 0.040465] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.040516] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262
ecap f0101a
[ 0.040579] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.040629] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262
ecap f0105a
[ 0.040691] DMAR: RMRR base: 0x000000aeba9000 end: 0x000000aebb7fff
[ 0.040740] DMAR: RMRR base: 0x000000af800000 end: 0x000000bf9fffff
[ 0.040789] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.040839] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.040886] DMAR-IR: Queued invalidation will be enabled to support x2apic
and Intr-remapping.
[ 0.041228] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.041276] x2apic enabled
[ 0.041323] Switched APIC routing to cluster x2apic.
[ 0.041815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081551] TSC deadline timer enabled
[ 0.081554] smpboot: CPU0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz (family:
0x6, model: 0x2a, stepping: 0x7)
[ 0.081705] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR,
full-width counters, Intel PMU driver.
[ 0.081931] ... version: 3
[ 0.081976] ... bit width: 48
[ 0.082021] ... generic registers: 4
[ 0.082066] ... value mask: 0000ffffffffffff
[ 0.082113] ... max period: 00007fffffffffff
[ 0.082160] ... fixed-purpose events: 3
[ 0.082861] ... event mask: 000000070000000f
[ 0.083492] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.083660] x86: Booting SMP configuration:
[ 0.083706] .... node #0, CPUs: #1 #2 #3 #4
[ 0.094203] MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more
details.
[ 0.094434] #5 #6 #7
[ 0.101950] x86: Booted up 1 node, 8 CPUs
[ 0.102027] smpboot: Total of 8 processors activated (44797.50 BogoMIPS)
[ 0.109384] devtmpfs: initialized
[ 0.109496] x86/mm: Memory block size: 128MB
[ 0.111934] PM: Registering ACPI NVS region [mem 0xae855000-0xae8a3fff]
(323584 bytes)
[ 0.112005] PM: Registering ACPI NVS region [mem 0xaebd3000-0xaebf0fff]
(122880 bytes)
[ 0.112068] PM: Registering ACPI NVS region [mem 0xaec15000-0xaec57fff]
(274432 bytes)
[ 0.112173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.112249] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.112330] pinctrl core: initialized pinctrl subsystem
[ 0.112483] NET: Registered protocol family 16
[ 0.125021] cpuidle: using governor ladder
[ 0.141028] cpuidle: using governor menu
[ 0.141113] ACPI: bus type PCI registered
[ 0.141159] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.141269] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.141335] PCI: not using MMCONFIG
[ 0.141379] PCI: Using configuration type 1 for base access
[ 0.141474] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.161184] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.161433] ACPI: Added _OSI(Module Device)
[ 0.161480] ACPI: Added _OSI(Processor Device)
[ 0.161527] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.161573] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.161812] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.164554] ACPI: Dynamic OEM Table Load:
[ 0.164660] ACPI: SSDT 0xFFFF8CAD344B6800 0006F4 (v01 AMI IST
00000001 MSFT 03000001)
[ 0.165070] ACPI: Dynamic OEM Table Load:
[ 0.165172] ACPI: SSDT 0xFFFF8CAD344A7200 0000E4 (v01 AMI CST
00000001 MSFT 03000001)
[ 0.166356] ACPI: Interpreter enabled
[ 0.166413] ACPI: (supports S0 S3 S4 S5)
[ 0.166458] ACPI: Using IOAPIC for interrupt routing
[ 0.166529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.166645] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI
motherboard resources
[ 0.166712] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a
huge-page mapping due to MTRR override.
[ 0.166866] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.167270] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.172240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.172293] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.172532] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
[ 0.172601] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus
00-3f] only partially covers this bridge
[ 0.172928] PCI host bridge to bus 0000:00
[ 0.172975] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.173025] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.173078] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.173127] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.173177] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.173239] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff
window]
[ 0.173301] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff
window]
[ 0.173363] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173417] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.173504] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.173533] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.173572] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.173664] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.173672] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
[ 0.173677] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.173681] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.173798] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.173829] pci 0000:00:16.0: reg 0x10: [mem 0xfbc2a000-0xfbc2a00f 64bit]
[ 0.173938] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.174016] pci 0000:00:16.2: [8086:1c3c] type 00 class 0x010185
[ 0.174039] pci 0000:00:16.2: reg 0x10: [io 0xf130-0xf137]
[ 0.174051] pci 0000:00:16.2: reg 0x14: [io 0xf120-0xf123]
[ 0.174065] pci 0000:00:16.2: reg 0x18: [io 0xf110-0xf117]
[ 0.174077] pci 0000:00:16.2: reg 0x1c: [io 0xf100-0xf103]
[ 0.174090] pci 0000:00:16.2: reg 0x20: [io 0xf0f0-0xf0ff]
[ 0.174229] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.174250] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 0.174263] pci 0000:00:16.3: reg 0x14: [mem 0xfbc29000-0xfbc29fff]
[ 0.174448] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.174473] pci 0000:00:19.0: reg 0x10: [mem 0xfbc00000-0xfbc1ffff]
[ 0.174486] pci 0000:00:19.0: reg 0x14: [mem 0xfbc28000-0xfbc28fff]
[ 0.174497] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.174599] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.174642] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.174732] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.174757] pci 0000:00:1a.0: reg 0x10: [mem 0xfbc27000-0xfbc273ff]
[ 0.174884] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.174927] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.175019] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.175046] pci 0000:00:1b.0: reg 0x10: [mem 0xfbc20000-0xfbc23fff 64bit]
[ 0.175174] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.175263] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.175382] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.175434] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.175528] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.175649] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.175701] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.175793] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.175915] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.175966] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.176057] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.176082] pci 0000:00:1d.0: reg 0x10: [mem 0xfbc26000-0xfbc263ff]
[ 0.176209] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.176252] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.176338] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.176458] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.176546] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[ 0.176758] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.176783] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.176796] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.176809] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.176822] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.176835] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.176848] pci 0000:00:1f.2: reg 0x24: [mem 0xfbc25000-0xfbc257ff]
[ 0.176923] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.177002] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.177025] pci 0000:00:1f.3: reg 0x10: [mem 0xfbc24000-0xfbc240ff 64bit]
[ 0.177062] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.177192] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.177321] pci 0000:02:00.0: [1b4b:9128] type 00 class 0x010601
[ 0.177347] pci 0000:02:00.0: reg 0x10: [io 0xe050-0xe057]
[ 0.177362] pci 0000:02:00.0: reg 0x14: [io 0xe040-0xe043]
[ 0.177378] pci 0000:02:00.0: reg 0x18: [io 0xe030-0xe037]
[ 0.177393] pci 0000:02:00.0: reg 0x1c: [io 0xe020-0xe023]
[ 0.177409] pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.177425] pci 0000:02:00.0: reg 0x24: [mem 0xfbb10000-0xfbb107ff]
[ 0.177441] pci 0000:02:00.0: reg 0x30: [mem 0xfbb00000-0xfbb0ffff pref]
[ 0.177454] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1
[ 0.177576] pci 0000:02:00.0: PME# supported from D3hot
[ 0.177672] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.177723] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.177728] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.177814] pci 0000:03:00.0: [1b4b:9128] type 00 class 0x010601
[ 0.177840] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.177856] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.177871] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.177887] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.177903] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.177918] pci 0000:03:00.0: reg 0x24: [mem 0xfba10000-0xfba107ff]
[ 0.177934] pci 0000:03:00.0: reg 0x30: [mem 0xfba00000-0xfba0ffff pref]
[ 0.177947] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1
[ 0.178069] pci 0000:03:00.0: PME# supported from D3hot
[ 0.178160] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.178211] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.178215] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.178306] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.178343] pci 0000:04:00.0: reg 0x10: [mem 0xfb900000-0xfb901fff 64bit]
[ 0.178528] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.178632] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.178685] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.178748] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.178769] pci 0000:05:03.0: reg 0x10: [mem 0xfb800000-0xfb800fff]
[ 0.178880] pci 0000:05:03.0: supports D1 D2
[ 0.178881] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.178966] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.179022] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfb8fffff]
[ 0.179030] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window]
(subtractive decode)
[ 0.179031] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window]
(subtractive decode)
[ 0.179033] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window]
(subtractive decode)
[ 0.179034] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window]
(subtractive decode)
[ 0.179035] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff
window] (subtractive decode)
[ 0.179036] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff
window] (subtractive decode)
[ 0.179038] pci 0000:00:1e.0: bridge window [mem 0xbfa00000-0xffffffff
window] (subtractive decode)
[ 0.179631] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.180056] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.180480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.180877] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.181278] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.181703] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0
[ 0.182166] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.182590] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.183031] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.183209] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.183258] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.183322] vgaarb: loaded
[ 0.183365] vgaarb: bridge control possible 0000:00:02.0
[ 0.183463] PCI: Using ACPI for IRQ routing
[ 0.186572] PCI: pci_cache_line_size set to 64 bytes
[ 0.186647] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
[ 0.186648] e820: reserve RAM buffer [mem 0xae855000-0xafffffff]
[ 0.186650] e820: reserve RAM buffer [mem 0xae9a3000-0xafffffff]
[ 0.186651] e820: reserve RAM buffer [mem 0xaebc3000-0xafffffff]
[ 0.186652] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.186653] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
[ 0.186779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.187080] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.189150] clocksource: Switched to clocksource hpet
[ 0.194554] VFS: Disk quotas dquot_6.6.0
[ 0.194630] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.194754] pnp: PnP ACPI init
[ 0.194927] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.194978] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.195028] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.195079] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195129] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.195181] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.195310] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.195360] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195552] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195608] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.195658] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195801] pnp 00:04: [dma 0 disabled]
[ 0.195856] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.195948] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.196101] system 00:06: [io 0x0400-0x0453] has been reserved
[ 0.196150] system 00:06: [io 0x0458-0x047f] has been reserved
[ 0.196200] system 00:06: [io 0x1180-0x119f] has been reserved
[ 0.196248] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.196297] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.196347] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.196397] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.196448] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.196498] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.196556] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.196606] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.196788] pnp: PnP ACPI: found 8 devices
[ 0.203235] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.203351] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.203403] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.203452] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.203506] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.203566] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.203614] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.203668] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.203728] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.203780] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.203840] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.203890] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfb8fffff]
[ 0.203951] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.203952] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.203953] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.203954] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.203956] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.203957] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.203958] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[ 0.203960] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.203961] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.203962] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.203964] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.203965] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.203966] pci_bus 0000:05: resource 1 [mem 0xfb800000-0xfb8fffff]
[ 0.203967] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
[ 0.203969] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.203970] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
[ 0.203971] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
[ 0.203972] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.203973] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.203975] pci_bus 0000:05: resource 10 [mem 0xbfa00000-0xffffffff window]
[ 0.204064] NET: Registered protocol family 2
[ 0.204172] IP idents hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.205416] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.205590] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.205756] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.205821] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.205893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.205995] NET: Registered protocol family 1
[ 0.206061] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled;
disabling
[ 0.206136] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.565413] PCI: CLS 64 bytes, default 64
[ 0.565454] Unpacking initramfs...
[ 0.858388] Freeing initrd memory: 19228K
[ 0.858488] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.858538] software IO TLB: mapped [mem 0xaa855000-0xae855000] (64MB)
[ 0.858969] audit: initializing netlink subsys (disabled)
[ 0.859033] audit: type=2000 audit(1651214013.848:1): initialized
[ 0.859434] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.859556] zbud: loaded
[ 0.860353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
250)
[ 0.860439] io scheduler noop registered
[ 0.860485] io scheduler deadline registered
[ 0.860541] io scheduler cfq registered (default)
[ 0.861292] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.861344] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 0.861365] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.861416] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.861469] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.861485] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.861536] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.861589] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[ 0.861604] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.861655] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.861707] pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded
[ 0.861715] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.861767] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.861827] intel_idle: MWAIT substates: 0x1120
[ 0.861828] intel_idle: v0.4.1 model 0x2A
[ 0.862065] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.862885] GHES: HEST is not enabled!
[ 0.862976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.883703] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 0.905394] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200)
is a 16550A
[ 0.905663] Linux agpgart interface v0.103
[ 0.937243] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 1.129245] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 1.129439] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[ 1.129488] AMD IOMMUv2 functionality not available on this system
[ 1.130208] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.133152] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.133205] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.133518] mousedev: PS/2 mouse device common for all mice
[ 1.133617] rtc_cmos 00:02: RTC can wake from S4
[ 1.133864] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.133948] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 1.134021] intel_pstate: Intel P-state driver initializing
[ 1.134725] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.135695] NET: Registered protocol family 10
[ 1.136109] mip6: Mobile IPv6
[ 1.136161] NET: Registered protocol family 17
[ 1.136216] mpls_gso: MPLS GSO support
[ 1.136712] microcode: sig=0x206a7, pf=0x2, revision=0x28
[ 1.137045] microcode: Microcode Update Driver: v2.01
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.137360] registered taskstats version 1
[ 1.137437] zswap: loaded using pool lzo/zbud
[ 1.169261] ima: No TPM chip found, activating TPM-bypass!
[ 1.169317] ima: Allocated hash algorithm: sha256
[ 1.169870] rtc_cmos 00:02: setting system clock to 2022-04-29 06:33:34 UTC
(1651214014)
[ 1.171212] Freeing unused kernel memory: 1456K
[ 1.171266] Write protecting the kernel read-only data: 12288k
[ 1.172078] Freeing unused kernel memory: 1868K
[ 1.176330] Freeing unused kernel memory: 1212K
[ 1.184969] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.276416] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.276595] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.276667] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.318083] pps_core: LinuxPPS API ver. 1 registered
[ 1.318150] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.318671] PTP clock support registered
[ 1.319509] SCSI subsystem initialized
[ 1.321119] ACPI: bus type USB registered
[ 1.321218] usbcore: registered new interface driver usbfs
[ 1.321310] usbcore: registered new interface driver hub
[ 1.321393] usbcore: registered new device driver usb
[ 1.321658] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.321716] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.322031] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 1.322391] libata version 3.00 loaded.
[ 1.322562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.323179] ehci-pci: EHCI PCI platform driver
[ 1.324651] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.324717] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
number 1
[ 1.324965] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96
quirks 0x00000004
[ 1.325629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.325689] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.325763] usb usb1: Product: xHCI Host Controller
[ 1.325821] usb usb1: Manufacturer: Linux 4.9.0-18-amd64 xhci-hcd
[ 1.325879] usb usb1: SerialNumber: 0000:04:00.0
[ 1.326123] hub 1-0:1.0: USB hub found
[ 1.326185] hub 1-0:1.0: 2 ports detected
[ 1.326396] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.326456] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
number 2
[ 1.328390] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.328493] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.328548] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.328616] usb usb2: Product: xHCI Host Controller
[ 1.328671] usb usb2: Manufacturer: Linux 4.9.0-18-amd64 xhci-hcd
[ 1.328727] usb usb2: SerialNumber: 0000:04:00.0
[ 1.328961] hub 2-0:1.0: USB hub found
[ 1.329030] hub 2-0:1.0: 2 ports detected
[ 1.330087] AVX version of gcm_enc/dec engaged.
[ 1.330141] AES CTR mode by8 optimization enabled
[ 1.393355] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8
IR + 8 IT contexts, quirks 0x0
[ 1.427596] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC
clock
[ 1.533131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
00:22:4d:69:5a:d1
[ 1.533213] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.533328] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.533623] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.534499] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.534697] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.534777] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.534886] ehci-pci 0000:00:1a.0: debug port 2
[ 1.538866] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.538889] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbc27000
[ 1.573309] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 1.589326] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.589467] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.589527] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.589600] usb usb3: Product: EHCI Host Controller
[ 1.589655] usb usb3: Manufacturer: Linux 4.9.0-18-amd64 ehci_hcd
[ 1.589712] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.589985] hub 3-0:1.0: USB hub found
[ 1.590044] hub 3-0:1.0: 3 ports detected
[ 1.590408] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.590472] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 4
[ 1.590560] ehci-pci 0000:00:1d.0: debug port 2
[ 1.594534] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.594557] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbc26000
[ 1.725307] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.725449] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.725509] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.725582] usb usb4: Product: EHCI Host Controller
[ 1.725636] usb usb4: Manufacturer: Linux 4.9.0-18-amd64 ehci_hcd
[ 1.725693] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.725953] hub 4-0:1.0: USB hub found
[ 1.726014] hub 4-0:1.0: 3 ports detected
[ 1.726313] ahci 0000:00:1f.2: version 3.0
[ 1.736701] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37
impl SATA mode
[ 1.736781] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum
part ems sxs apst
[ 1.762516] usb 1-2: New USB device found, idVendor=0a81, idProduct=0205
[ 1.762578] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.762637] usb 1-2: Product: PS2 to USB Converter
[ 1.762692] usb 1-2: Manufacturer: CHESEN
[ 1.775184] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.782042] scsi host0: ahci
[ 1.782239] scsi host1: ahci
[ 1.782427] scsi host2: ahci
[ 1.782650] scsi host3: ahci
[ 1.782872] scsi host4: ahci
[ 1.783094] scsi host5: ahci
[ 1.783210] ata1: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25100
irq 39
[ 1.783291] ata2: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25180
irq 39
[ 1.783364] ata3: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25200
irq 39
[ 1.783432] ata4: DUMMY
[ 1.783481] ata5: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25300
irq 39
[ 1.783552] ata6: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25380
irq 39
[ 1.784251] scsi host6: ata_generic
[ 1.784446] scsi host7: ata_generic
[ 1.784567] ata7: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 18
[ 1.784632] ata8: PATA max UDMA/100 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 18
[ 1.793989] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff
impl SATA mode
[ 1.794064] ahci 0000:02:00.0: flags: 64bit ncq pio
[ 1.795299] scsi host8: ahci
[ 1.795551] scsi host9: ahci
[ 1.795847] scsi host10: ahci
[ 1.796111] scsi host11: ahci
[ 1.796349] scsi host12: ahci
[ 1.796545] scsi host13: ahci
[ 1.796703] scsi host14: ahci
[ 1.796863] scsi host15: ahci
[ 1.796972] ata9: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10100
irq 40
[ 1.797050] ata10: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10180
irq 40
[ 1.797121] ata11: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10200
irq 40
[ 1.797190] ata12: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10280
irq 40
[ 1.797275] ata13: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10300
irq 40
[ 1.797352] ata14: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10380
irq 40
[ 1.797421] ata15: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10400
irq 40
[ 1.797490] ata16: SATA max UDMA/133 abar m2048@0xfbb10000 port 0xfbb10480
irq 40
[ 1.807915] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff
impl SATA mode
[ 1.808692] ahci 0000:03:00.0: flags: 64bit ncq pio
[ 1.810031] scsi host16: ahci
[ 1.810482] scsi host17: ahci
[ 1.810701] usbcore: registered new interface driver usbhid
[ 1.810772] usbhid: USB HID core driver
[ 1.810852] scsi host18: ahci
[ 1.811095] scsi host19: ahci
[ 1.811378] scsi host20: ahci
[ 1.811625] scsi host21: ahci
[ 1.811715] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb1/1-2/1-2:1.0/0003:0A81:0205.0001/input/input3
[ 1.811834] scsi host22: ahci
[ 1.812045] scsi host23: ahci
[ 1.812183] ata17: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10100
irq 41
[ 1.812261] ata18: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10180
irq 41
[ 1.812342] ata19: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10200
irq 41
[ 1.812417] ata20: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10280
irq 41
[ 1.812484] ata21: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10300
irq 41
[ 1.812551] ata22: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10380
irq 41
[ 1.812618] ata23: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10400
irq 41
[ 1.812685] ata24: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10480
irq 41
[ 1.845286] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.861306] tsc: Refined TSC clocksource calibration: 2800.046 MHz
[ 1.861374] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x285c6c3b9bb, max_idle_ns: 440795208083 ns
[ 1.869588] hid-generic 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input0
[ 1.869913] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb1/1-2/1-2:1.1/0003:0A81:0205.0002/input/input4
[ 1.925506] firewire_core 0000:05:03.0: created device fw0: GUID
00224dffff53e20e, S400
[ 1.929630] hid-generic 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:04:00.0-2/input1
[ 1.977317] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.993698] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.993757] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.994198] hub 3-1:1.0: USB hub found
[ 1.994390] hub 3-1:1.0: 6 ports detected
[ 2.096308] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.096391] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.096476] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.096562] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.096646] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.099731] ata3.00: ATAPI: PIONEER BD-RW BDR-209M, 1.52, max UDMA/100
[ 2.103461] ata3.00: configured for UDMA/100
[ 2.107876] ata1.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133
[ 2.107954] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.112188] ata15: SATA link down (SStatus 0 SControl 330)
[ 2.112288] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 2.112380] ata11: SATA link down (SStatus 0 SControl 330)
[ 2.112474] ata9: SATA link down (SStatus 0 SControl 330)
[ 2.112566] ata12: SATA link down (SStatus 0 SControl 330)
[ 2.112661] ata13: SATA link down (SStatus 0 SControl 330)
[ 2.112755] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 2.112848] ata14: SATA link down (SStatus 0 SControl 330)
[ 2.112930] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 2.113239] ata16.00: configured for UDMA/66
[ 2.117830] ata1.00: configured for UDMA/133
[ 2.118411] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i
PQ: 0 ANSI: 5
[ 2.121270] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
[ 2.121354] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 2.122231] ata2.00: configured for UDMA/133
[ 2.125714] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.125774] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.126191] hub 4-1:1.0: USB hub found
[ 2.126398] hub 4-1:1.0: 8 ports detected
[ 2.128188] ata24: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 2.128288] ata19: SATA link down (SStatus 0 SControl 310)
[ 2.128384] ata22: SATA link down (SStatus 0 SControl 310)
[ 2.128478] ata21: SATA link down (SStatus 0 SControl 310)
[ 2.128573] ata20: SATA link down (SStatus 0 SControl 310)
[ 2.128673] ata17: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 2.128764] ata23: SATA link down (SStatus 0 SControl 310)
[ 2.135049] ata10.00: ATA-9: ST3000DM001-1ER166, CC25, max UDMA/133
[ 2.135107] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32),
AA
[ 2.136602] ata10.00: configured for UDMA/133
[ 2.162017] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C
PQ: 0 ANSI: 5
[ 2.162971] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0
GB/55.9 GiB)
[ 2.163265] sd 0:0:0:0: [sda] Write Protect is off
[ 2.163326] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.163407] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.164585] sda: sda1 sda2 sda3 sda4
[ 2.165965] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.217634] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00
TB/2.73 TiB)
[ 2.217741] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.218127] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.218202] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.218345] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.224734] scsi 2:0:0:0: CD-ROM PIONEER BD-RW BDR-209M 1.52
PQ: 0 ANSI: 5
[ 2.248111] ata24.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 2.248363] ata24.00: configured for UDMA/66
[ 2.248917] ata17.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 2.248973] ata17.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32),
AA
[ 2.266033] sr 2:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 2.266106] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.266468] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.266564] sdb: sdb1
[ 2.266927] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.273613] ata17.00: configured for UDMA/133
[ 2.305383] ata18: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 2.306426] ata18.00: ATA-9: ST3000DM001-1CH166, CC27, max UDMA/133
[ 2.306482] ata18.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32),
AA
[ 2.325779] ata18.00: configured for UDMA/133
[ 2.371902] random: fast init done
[ 2.413546] scsi 9:0:0:0: Direct-Access ATA ST3000DM001-1ER1 CC25
PQ: 0 ANSI: 5
[ 2.477655] sd 9:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00
TB/2.73 TiB)
[ 2.477761] sd 9:0:0:0: [sdc] 4096-byte physical blocks
[ 2.478195] sd 9:0:0:0: [sdc] Write Protect is off
[ 2.478264] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.478276] scsi 15:0:0:0: Processor Marvell 91xx Config 1.01
PQ: 0 ANSI: 5
[ 2.478413] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.478986] scsi 16:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24
PQ: 0 ANSI: 5
[ 2.509642] sd 16:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00
TB/2.73 TiB)
[ 2.509746] sd 16:0:0:0: [sdd] 4096-byte physical blocks
[ 2.509976] scsi 17:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC27
PQ: 0 ANSI: 5
[ 2.510157] sd 16:0:0:0: [sdd] Write Protect is off
[ 2.510225] sd 16:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.510371] sd 16:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.545671] sd 17:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00
TB/2.73 TiB)
[ 2.545791] sd 17:0:0:0: [sde] 4096-byte physical blocks
[ 2.546175] sd 17:0:0:0: [sde] Write Protect is off
[ 2.546183] scsi 23:0:0:0: Processor Marvell 91xx Config 1.01
PQ: 0 ANSI: 5
[ 2.546323] sd 17:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.546398] sd 17:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.550764] sdc: sdc1
[ 2.551731] sd 9:0:0:0: [sdc] Attached SCSI disk
[ 2.560746] sdd: sdd1
[ 2.561459] sd 16:0:0:0: [sdd] Attached SCSI disk
[ 2.605609] sde: sde1
[ 2.606673] sd 17:0:0:0: [sde] Attached SCSI disk
[ 2.784827] device-mapper: uevent: version 1.0.3
[ 2.784997] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:
dm-de...@redhat.com
[ 2.885500] clocksource: Switched to clocksource tsc
[ 7.576778] random: crng init done
[ 7.576780] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.929294] NET: Registered protocol family 38
[ 9.175913] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.299413] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.308550] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 9.309712] systemd[1]: Detected architecture x86-64.
[ 9.312909] systemd[1]: Set hostname to <tinkywinky>.
[ 9.413706] systemd[1]: strongswan.service: Cannot add dependency job,
ignoring: Unit strongswan.service is masked.
[ 9.413819] systemd[1]: openvpn.service: Cannot add dependency job,
ignoring: Unit openvpn.service is masked.
[ 9.413969] systemd[1]: zfs.target: Cannot add dependency job, ignoring:
Unit zfs.target is masked.
[ 9.414718] systemd[1]: Listening on Journal Audit Socket.
[ 9.415095] systemd[1]: Listening on udev Kernel Socket.
[ 9.415422] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.415744] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.433861] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 9.443398] lp: driver loaded but no devices found
[ 9.445771] ppdev: user-space parallel port driver
[ 9.514505] systemd-journald[368]: Received request to flush runtime journal
from PID 1
[ 9.527979] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 9.528049] ACPI: Power Button [PWRB]
[ 9.528164] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 9.528229] ACPI: Power Button [PWRF]
[ 9.547793] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.558892] [drm] Initialized
[ 9.559863] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.559997] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.560094] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 9.560293] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 9.560395] scsi 15:0:0:0: Attached scsi generic sg4 type 3
[ 9.560483] sd 16:0:0:0: Attached scsi generic sg5 type 0
[ 9.560584] sd 17:0:0:0: Attached scsi generic sg6 type 0
[ 9.563761] scsi 23:0:0:0: Attached scsi generic sg7 type 3
[ 9.603970] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.605693] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms
ovfl timer
[ 9.605756] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 9.605799] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 9.605861] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 9.623674] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.623751] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1
(0x17/0x0/0x0/0x0/0x0)
[ 9.623825] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 9.623890] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 9.623940] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 9.623989] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 9.624966] [drm] Memory usable by graphics device = 2048M
[ 9.625018] [drm] Replacing VGA console driver
[ 9.625507] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 9.625509] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 9.625510] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 9.625594] Console: switching to colour dummy device 80x25
[ 9.634034] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.634042] [drm] Driver supports precise vblank timestamp query.
[ 9.636371] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.654760] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.698372] iTCO_vendor_support: vendor-support=0
[ 9.698935] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.698985] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 9.699132] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.750788] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 9.750800] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 9.753976] Adding 976892k swap on /dev/mapper/sda2_crypt. Priority:-1
extents:1 across:976892k SSFS
[ 9.792574] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 9.792677] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.792780] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.792870] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.792959] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.793773] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.861716] fbcon: inteldrmfb (fb0) is primary device
[ 9.898267] intel_rapl: Found RAPL domain package
[ 9.898269] intel_rapl: Found RAPL domain core
[ 9.898271] intel_rapl: Found RAPL domain uncore
[ 9.898278] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 9.915107] Console: switching to colour frame buffer device 240x67
[ 9.937920] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.640530] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 14.043056] vboxdrv: loading out-of-tree module taints kernel.
[ 14.049070] vboxdrv: Found 8 processor cores
[ 14.066447] vboxdrv: TSC mode is Invariant, tentative frequency 2800048432 Hz
[ 14.066448] vboxdrv: Successfully loaded version 6.1.32 r149290 (interface
0x00320000)
[ 14.175511] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 14.272233] VBoxNetFlt: Successfully started.
[ 14.274790] VBoxNetAdp: Successfully started.
[ 14.422390] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 17.956513] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 17.956570] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 57.299318] FS-Cache: Loaded
[ 57.299963] Key type dns_resolver registered
[ 57.364692] FS-Cache: Netfs 'cifs' registered for caching
[ 57.364737] Key type cifs.spnego registered
[ 57.364741] Key type cifs.idmap registered
[ 101.951759] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 101.976513] usb 2-1: New USB device found, idVendor=0781, idProduct=5583
[ 101.976519] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 101.976522] usb 2-1: Product: Ultra Fit
[ 101.976525] usb 2-1: Manufacturer: SanDisk
[ 101.976528] usb 2-1: SerialNumber: 4C530123070827101460
[ 102.003794] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 102.003933] scsi host24: usb-storage 2-1:1.0
[ 102.004048] usbcore: registered new interface driver usb-storage
[ 102.005684] usbcore: registered new interface driver uas
[ 103.024824] scsi 24:0:0:0: Direct-Access SanDisk Ultra Fit 1.00
PQ: 0 ANSI: 6
[ 103.025676] sd 24:0:0:0: Attached scsi generic sg8 type 0
[ 103.025948] sd 24:0:0:0: [sdf] 31266816 512-byte logical blocks: (16.0
GB/14.9 GiB)
[ 103.026860] sd 24:0:0:0: [sdf] Write Protect is off
[ 103.026865] sd 24:0:0:0: [sdf] Mode Sense: 43 00 00 00
[ 103.027459] sd 24:0:0:0: [sdf] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 103.045427] sdf: sdf1 sdf2
sdf2: <bsd: sdf5 >
[ 103.047592] sd 24:0:0:0: [sdf] Attached SCSI removable disk
[ 850.246247] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[ 850.610373] usb 2-1: USB disconnect, device number 2
[ 860.462881] xhci_hcd 0000:04:00.0: xHCI host not responding to stop endpoint
command.
[ 860.462891] xhci_hcd 0000:04:00.0: Assuming host is dying, halting host.
[ 860.494916] xhci_hcd 0000:04:00.0: Host not halted after 32000 microseconds.
[ 860.494922] xhci_hcd 0000:04:00.0: Non-responsive xHCI host is not halting.
[ 860.494925] xhci_hcd 0000:04:00.0: Completing active URBs anyway.
[ 860.494939] xhci_hcd 0000:04:00.0: HC died; cleaning up
[ 860.494977] usb usb1-port1: couldn't allocate usb_device
[ 860.494990] usb 1-2: USB disconnect, device number 2
[ 868.496579] xhci_hcd 0000:04:00.0: Stopped the command ring failed, maybe
the host is dead
[ 868.528594] xhci_hcd 0000:04:00.0: Host not halted after 32000 microseconds.
[ 868.528595] xhci_hcd 0000:04:00.0: Abort command ring failed
[ 868.528704] xhci_hcd 0000:04:00.0: HC died; cleaning up
[ 931.035305] usb 3-1.1: new low-speed USB device number 3 using ehci-pci
[ 931.152794] usb 3-1.1: New USB device found, idVendor=0a81, idProduct=0205
[ 931.152800] usb 3-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 931.152804] usb 3-1.1: Product: PS2 to USB Converter
[ 931.152807] usb 3-1.1: Manufacturer: CHESEN
[ 931.160320] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:0A81:0205.0003/input/input14
[ 931.219750] hid-generic 0003:0A81:0205.0003: input,hidraw0: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1/input0
[ 931.227949] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:0A81:0205.0004/input/input15
[ 931.287794] hid-generic 0003:0A81:0205.0004: input,hidraw1: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1/input1
--- End Message ---
