--- Begin Message ---
Package: src:linux
Version: 5.18.16-1
Severity: important
X-Debbugs-Cc: pudh4...@gmail.com
Dear Maintainer,
I'm currently using a Loongson 3A4000 based system as my desktop computer.
After generating an initramfs image for the new kernel, it failed to boot.
Following serial console output was observed:
[ 0.000000] Linux version 5.18.0-4-loongson-3 (debian-
ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-5) 11.3.0, GNU ld (GNU Binutils
for Debian) 2.38.90.20220713) #1 SMP PREEMPT Debian 5.18.16-1 (2022-08-10)
[ 0.000000] CpuClock = 1800000000
[ 0.000000] The bridge chip is LS7A
[ 0.000000] CP0_Config3: CP0 16.3 (0xdc8030a0)
[ 0.000000] CP0_PageGrain: CP0 5.1 (0x28000000)
[ 0.000000] NUMA: Discovered 4 cpus on 1 nodes
[ 0.000000] Node0: mem_type:1, mem_start:0x200000, mem_size:0xee MB
[ 0.000000] start_pfn:0x80, end_pfn:0x3c00, num_physpages:0x3b80
[ 0.000000] Node0: mem_type:2, mem_start:0x90200000, mem_size:0x6fe MB
[ 0.000000] start_pfn:0x24080, end_pfn:0x40000, num_physpages:0x1fb00
[ 0.000000] Node0: mem_type:2, mem_start:0x120000000, mem_size:0x1600 MB
[ 0.000000] start_pfn:0x48000, end_pfn:0xa0000, num_physpages:0x77b00
[ 0.000000] Node0's addrspace_offset is 0x0
[ 0.000000] Node0: start_pfn=0x80, end_pfn=0xa0000
[ 0.000000] NUMA: set cpumask cpu 0 on node 0
[ 0.000000] NUMA: set cpumask cpu 1 on node 0
[ 0.000000] NUMA: set cpumask cpu 2 on node 0
[ 0.000000] NUMA: set cpumask cpu 3 on node 0
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0014c001 (ICT Loongson-3)
[ 0.000000] FPU revision is: 00f70501
[ 0.000000] MSA revision is: 00060140
[ 0.000000] OF: fdt: No chosen node found, continuing without
[ 0.000000] MIPS: machine is loongson,loongson64g-4core-ls7a
[ 0.000000] Initial ramdisk at: 0x980000000a490000 (20085726 bytes)
[ 0.000000] software IO TLB: mapped [mem
0x000000000020c000-0x000000000220c000] (32MB)
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: SANCOG SANCOG-QingLong-L402-V1.0-DeskTop/SANCOG-
QingLong-L402-V1.0-DeskTop, BIOS Kunlun-L402-V4.1.4 05/25/2020
[ 0.000000] Detected 4 available CPU(s)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[ 0.000000] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64
bytes
[ 0.000000] Unified victim cache 256kB 16-way, linesize 64 bytes.
[ 0.000000] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000000effffff]
[ 0.000000] node 0: [mem 0x0000000090200000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000120000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000027fffffff]
[ 0.000000] On node 0, zone DMA32: 128 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 1152 pages in unavailable ranges
[ 0.000000] percpu: Embedded 13 pages/cpu s170416 r8192 d34384 u212992
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 488325
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=UUID=acb13fb9-2b52-4308-b49a-aebfcf6bacbb ro nohz=off swiotlb=16384
console=tty0 console=ttyS0,115200n8 rd_start=0xffffffff8a490000
rd_size=0x1327bde
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes,
linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 2204720K/7843840K available (10712K kernel code, 1755K
rwdata, 2876K rodata, 2672K init, 16853K bss, 164832K reserved, 0K cma-
reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31083 entries in 31 pages
[ 0.000000] ftrace: allocated 31 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 320
[ 0.000000] ISA Bridge: /bus@10000000/isa@18000000
[ 0.000000] IO 0x0000000018000000..0x000000001801ffff ->
0x0000000000000000
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 2123622718 ns
[ 0.000000] sched_clock: 32 bits at 900MHz, resolution 1ns, wraps every
2386093055ns
[ 0.007915] Console: colour dummy device 80x25
[ 0.012810] printk: console [tty0] enabled
[ 0.016926] Calibrating delay loop... 3592.19 BogoMIPS (lpj=7184384)
[ 0.039238] pid_max: default: 32768 minimum: 301
[ 0.044011] LSM: Security Framework initializing
[ 0.048632] landlock: Up and running.
[ 0.052292] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.059048] AppArmor: AppArmor initialized
[ 0.063124] TOMOYO Linux initialized
[ 0.066748] LSM support for eBPF active
[ 0.070694] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes,
linear)
[ 0.078306] Mountpoint-cache hash table entries: 16384 (order: 3, 131072
bytes, linear)
[ 0.087401] cblist_init_generic: Setting adjustable number of callback
queues.
[ 0.094662] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.100828] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.106996] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.113150] Performance counters: mips/loongson3 PMU enabled, 4 64-bit
counters available to each CPU, irq 23
[ 0.123200] rcu: Hierarchical SRCU implementation.
[ 0.128484] smp: Bringing up secondary CPUs ...
[ 0.133208] Booting CPU#1...
[ 4.074227] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[ 4.074235] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64
bytes
[ 4.074238] Unified victim cache 256kB 16-way, linesize 64 bytes.
[ 4.074241] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 0.140338] CPU1 revision is: 0014c001 (ICT Loongson-3)
[ 0.140358] FPU revision is: 00f70501
[ 0.140361] MSA revision is: 00060140
[ 0.153085] CPU#1 finished, CP0_ST=5400cce1
[ 0.197354] Booting CPU#2...
[ 4.138373] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[ 4.138381] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64
bytes
[ 4.138385] Unified victim cache 256kB 16-way, linesize 64 bytes.
[ 4.138388] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 0.203912] CPU2 revision is: 0014c001 (ICT Loongson-3)
[ 0.203932] FPU revision is: 00f70501
[ 0.203935] MSA revision is: 00060140
[ 0.217103] CPU#2 finished, CP0_ST=5400cce1
[ 0.261344] Booting CPU#3...
[ 4.202362] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[ 4.202369] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64
bytes
[ 4.202373] Unified victim cache 256kB 16-way, linesize 64 bytes.
[ 4.202376] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[ 0.267896] CPU3 revision is: 0014c001 (ICT Loongson-3)
[ 0.267916] FPU revision is: 00f70501
[ 0.267918] MSA revision is: 00060140
[ 0.281148] CPU#3 finished, CP0_ST=5400cce1
[ 0.325161] smp: Brought up 1 node, 4 CPUs
[ 0.339350] node 0 deferred pages initialised in 8ms
[ 0.344941] devtmpfs: initialized
[ 0.349278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.359095] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[ 0.366584] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.372583] audit: initializing netlink subsys (disabled)
[ 0.378067] audit: type=2000 audit(0.316:1): state=initialized
audit_enabled=0 res=1
[ 0.378271] thermal_sys: Registered thermal governor 'fair_share'
[ 0.385844] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.391991] thermal_sys: Registered thermal governor 'step_wise'
[ 0.398061] thermal_sys: Registered thermal governor 'user_space'
[ 0.404174] cpuidle: using governor ladder
[ 0.423684] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.431122] iommu: Default domain type: Translated
[ 0.435985] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.442446] SCSI subsystem initialized
[ 0.446658] NetLabel: Initializing
[ 0.450015] NetLabel: domain hash size = 128
[ 0.454427] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.460166] NetLabel: unlabeled traffic allowed by default
[ 0.465876] vgaarb: loaded
[ 0.468609] clocksource: Switched to clocksource MIPS
[ 0.505232] VFS: Disk quotas dquot_6.6.0
[ 0.509196] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.516666] AppArmor: AppArmor Filesystem Enabled
[ 0.524444] NET: Registered PF_INET protocol family
[ 0.529548] IP idents hash table entries: 131072 (order: 6, 1048576 bytes,
linear)
[ 0.539507] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2,
65536 bytes, linear)
[ 0.548128] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes,
linear)
[ 0.555989] TCP established hash table entries: 65536 (order: 5, 524288
bytes, linear)
[ 0.564212] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes,
linear)
[ 0.571786] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.578463] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes,
linear)
[ 0.586038] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.592875] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes,
linear)
[ 0.600243] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.605903] NET: Registered PF_XDP protocol family
[ 0.610736] PCI: CLS 0 bytes, default 64
[ 0.614830] Trying to unpack rootfs image as initramfs...
[ 0.620273] CPU 0 Unable to handle kernel paging request at virtual address
00000000003f8360, epc == 00000000003f8360, ra == ffffffff8312dbf4
[ 0.620298] Starting KVM with MIPS VZ extensions
[ 0.633090] Oops[#1]:
[ 0.640011] CPU: 0 PID: 8 Comm: kworker/u8:0 Not tainted 5.18.0-4-loongson-3
#1 Debian 5.18.16-1
[ 0.648989] Hardware name: SANCOG SANCOG-QingLong-L402-V1.0-DeskTop/SANCOG-
QingLong-L402-V1.0-DeskTop, BIOS Kunlun-L402-V4.1.4 05/25/2020
[ 0.661488] Workqueue: events_unbound async_run_entry_fn
[ 0.666848] $ 0 : 0000000000000000 ffffffff83ad1c48 0000000000000000
00000000003f8360
[ 0.674950] $ 4 : 0000000000000000 ffffffff83aa6038 0000000000000000
0000000000020000
[ 0.683046] $ 8 : 0000000000000000 0000000000000040 0000000000000001
0000000000000000
[ 0.691141] $12 : 0000000000000000 ffffffff83185274 0000000000000010
98000001202c3adf
[ 0.699238] $16 : 980000000a490000 ffffffff83aa6038 0000000000000000
0000000000000000
[ 0.707334] $20 : 0000000000000000 0000000000000000 c00000000109c000
0000000001327bde
[ 0.715429] $24 : 0000000000000038 ffffffff831dd420
[ 0.723526] $28 : 98000001202c0000 98000001202c3ba0 0000000000000000
ffffffff8312dbf4
[ 0.731621] Hi : 0000000000961ae7
[ 0.735225] Lo : 4bc6a7ef9e646d01
[ 0.738832] epc : 00000000003f8360 0x3f8360
[ 0.743233] ra : ffffffff8312dbf4 ZSTD_getErrorCode+0x14/0x38
[ 0.749306] Status: 5400cce3 KX SX UX KERNEL EXL IE
[ 0.754320] Cause : 00000008 (ExcCode 02)
[ 0.758369] BadVA : 00000000003f8360
[ 0.761977] PrId : 0014c001 (ICT Loongson-3)
[ 0.766376] Modules linked in:
[ 0.769457] Process kworker/u8:0 (pid: 8, threadinfo=(____ptrval____),
task=(____ptrval____), tls=0000000000000000)
[ 0.780022] Stack : 980000000a490000 ffffffff83aa6038 ffffffff83d4c078
ffffffff83ad1f14
[ 0.788117] ffffffff83aa638c 0000000000000cc0 ffffffff83920000
ffffffff83aa6d8c
[ 0.796213] 980000000a490000 0000000001327bde 0000000000000000
c00000000109c000
[ 0.804311] 0000000000020000 0000000000000000 00000000051a0800
0000000000400000
[ 0.812405] 0000000000020000 000000000000000a 0000000000000001
d5317fc51d224335
[ 0.820502] 980000000a490000 0000000001327bde 0000000000000000
ffffffff83af0000
[ 0.828597] ffffffff83af0000 ffffffff83af0000 ffffffff83af0000
ffffffff83af0000
[ 0.836694] ffffffff83d50000 ffffffff83aa6ec8 000000001f1ea19c
ffffffff83af0000
[ 0.844790] ffffffff83920000 ffffffff83af0000 ffffffff837a78c0
ffffffff837a7890
[ 0.852887] ffffffff837a7868 ffffffff835fa484 ffffffff837f5198
d5317fc51d224335
[ 0.860981] ...
[ 0.863443] Call Trace:
[ 0.863445]
[ 0.867400] [<ffffffff83aa6038>] error+0x0/0x28
[ 0.871976] [<ffffffff83ad1f14>] unzstd+0x20c/0x420
[ 0.876905] [<ffffffff83aa638c>] flush_buffer+0x0/0xec
[ 0.882097] [<ffffffff83aa6d8c>] unpack_to_rootfs+0x9c/0x340
[ 0.887820] [<ffffffff83aa6ec8>] unpack_to_rootfs+0x1d8/0x340
[ 0.893625] [<ffffffff835fa484>] _printk+0x50/0x74
[ 0.898466] [<ffffffff83aa75a8>] do_populate_rootfs+0x78/0x144
[ 0.904361] [<ffffffff82c360c4>] async_run_entry_fn+0x54/0x1a0
[ 0.910257] [<ffffffff82c26748>] process_one_work+0x250/0x5d8
[ 0.916065] [<ffffffff82c26c7c>] worker_thread+0x1ac/0x5a8
[ 0.921610] [<ffffffff82c26ad0>] worker_thread+0x0/0x5a8
[ 0.926978] [<ffffffff82c31718>] kthread+0x130/0x178
[ 0.931992] [<ffffffff82c315e8>] kthread+0x0/0x178
[ 0.936833] [<ffffffff82c315e8>] kthread+0x0/0x178
[ 0.941674] [<ffffffff82ba5c0c>] ret_from_kernel_thread+0x14/0x1c
[ 0.947837]
[ 0.949327] Code: (Bad address in epc)
[ 0.949327]
[ 0.954613]
[ 0.956150] ---[ end trace 0000000000000000 ]---
[ 0.957033] Initialise system trusted keyrings
[ 0.965302] Key type blacklist registered
[ 0.969377] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 0.978769] zbud: loaded
[ 0.981689] integrity: Platform Keyring initialized
[ 0.986561] Key type asymmetric registered
[ 0.990680] Asymmetric key parser 'x509' registered
[ 21.388614] random: crng init done
If I switched to a xz-compressed initrd, the kernel boots normally.
** Board Info (/sys/firmware/lefi/boardinfo)
Board Info
Manufacturer : SANCOG
Board Name : SANCOG-LS3A4000-7A1000-1w-V1.0-DeskTop
Family : LOONGSON3
BIOS Info
Vendor : Kunlun
Version : Kunlun-L402-V4.1.4-20200525181355
ROM Size : 4 KB
Release Date : 2020-05-25
-- Package-specific info:
** Version:
Linux version 5.18.0-4-loongson-3 (debian-kernel@lists.debian.org) (gcc-11
(Debian 11.3.0-5) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38.90.20220713) #1
SMP PREEMPT Debian 5.18.16-1 (2022-08-10)
** Command line:
root=UUID=acb13fb9-2b52-4308-b49a-aebfcf6bacbb ro nohz=off swiotlb=16384 quiet
console=tty0 console=ttyS0,115200n8 rd_start=0xffffffff8aa40000 rd_size=0xe0c6a8
** Not tainted
** Kernel log:
[ 8.558045] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 8.558826] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.18
[ 8.558834] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.558837] usb usb5: Product: xHCI Host Controller
[ 8.558841] usb usb5: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd
[ 8.558844] usb usb5: SerialNumber: 0000:01:00.0
[ 8.563306] hid: raw HID events driver (C) Jiri Kosina
[ 8.564387] pps pps0: new PPS source ptp0
[ 8.564747] igb 0000:04:00.0: added PHC on eth0
[ 8.564752] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 8.564756] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:23:9e:06:17:e8
[ 8.564762] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
[ 8.564766] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx
queue(s)
[ 8.597460] igb 0000:04:00.0 enp4s0: renamed from eth0
[ 8.603419] usbcore: registered new interface driver usbhid
[ 8.603428] usbhid: USB HID core driver
[ 8.604636] snd_hda_intel 0000:05:00.1: Force to snoop mode by module option
[ 8.610405] hub 5-0:1.0: USB hub found
[ 8.610588] hub 5-0:1.0: 2 ports detected
[ 8.626517] input: SIGMACHIP USB Keyboard as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-1/4-1:1.0/0003:1C4F:0002.0001/input/input0
[ 8.636343] usb usb6: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 8.636430] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 5.18
[ 8.636436] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.636440] usb usb6: Product: xHCI Host Controller
[ 8.636443] usb usb6: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd
[ 8.636447] usb usb6: SerialNumber: 0000:01:00.0
[ 8.644484] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops
initialize_plane [amdgpu])
[ 8.658073] hub 6-0:1.0: USB hub found
[ 8.658143] hub 6-0:1.0: 2 ports detected
[ 8.664005] Adding 16776176k swap on /dev/nvme0n1p4. Priority:-2 extents:1
across:16776176k SSFS
[ 8.668376] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input1
[ 8.684429] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 8.684987] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 7
[ 8.723014] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10
Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:05.0-1/input0
[ 8.725307] input: HDA ATI HDMI HDMI/DP,pcm=7 as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input2
[ 8.727890] input: SIGMACHIP USB Keyboard Consumer Control as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-1/4-1:1.1/0003:1C4F:0002.0002/input/input7
[ 8.729191] input: HDA ATI HDMI HDMI/DP,pcm=8 as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input3
[ 8.745600] xhci_hcd 0000:02:00.0: hcc params 0x0200e080 hci version 0x100
quirks 0x0000000010800410
[ 8.746055] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 8.746067] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 8
[ 8.746079] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 8.746206] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.18
[ 8.746212] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.746216] usb usb7: Product: xHCI Host Controller
[ 8.746219] usb usb7: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd
[ 8.746222] usb usb7: SerialNumber: 0000:02:00.0
[ 8.746485] hub 7-0:1.0: USB hub found
[ 8.746504] hub 7-0:1.0: 2 ports detected
[ 8.746727] usb usb8: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 8.746775] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 5.18
[ 8.746780] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.746784] usb usb8: Product: xHCI Host Controller
[ 8.746787] usb usb8: Manufacturer: Linux 5.18.0-4-loongson-3 xhci-hcd
[ 8.746790] usb usb8: SerialNumber: 0000:02:00.0
[ 8.746966] hub 8-0:1.0: USB hub found
[ 8.746982] hub 8-0:1.0: 2 ports detected
[ 8.784288] input: SIGMACHIP USB Keyboard System Control as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-1/4-1:1.1/0003:1C4F:0002.0002/input/input8
[ 8.784321] input: HDA ATI HDMI HDMI/DP,pcm=9 as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input4
[ 8.784462] input: HDA ATI HDMI HDMI/DP,pcm=10 as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input5
[ 8.784614] input: HDA ATI HDMI HDMI/DP,pcm=11 as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:05:00.1/sound/card0/input6
[ 8.787528] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10
Device [SIGMACHIP USB Keyboard] on usb-0000:00:05.0-1/input1
[ 8.789818] input: USB OPTICAL MOUSE as
/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:05.0/usb4/4-2/4-2:1.0/0003:275D:0BA6.0003/input/input9
[ 8.808214] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11
Mouse [USB OPTICAL MOUSE ] on usb-0000:00:05.0-2/input0
[ 8.862814] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode.
Quota mode: none.
[ 8.909451] Bluetooth: Core ver 2.22
[ 8.909524] NET: Registered PF_BLUETOOTH protocol family
[ 8.909528] Bluetooth: HCI device and connection manager initialized
[ 8.909543] Bluetooth: HCI socket layer initialized
[ 8.909549] Bluetooth: L2CAP socket layer initialized
[ 8.909564] Bluetooth: SCO socket layer initialized
[ 8.918122] usbcore: registered new interface driver btusb
[ 8.933803] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b
lmp_ver=0a lmp_subver=8761
[ 8.935787] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 8.935794] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[ 8.938913] bluetooth hci0: firmware: direct-loading firmware
rtl_bt/rtl8761bu_fw.bin
[ 8.938962] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[ 8.939169] bluetooth hci0: firmware: direct-loading firmware
rtl_bt/rtl8761bu_config.bin
[ 8.939196] Bluetooth: hci0: RTL: cfg_sz 6, total sz 20522
[ 8.984018] audit: type=1400 audit(1657746341.183:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=402
comm="apparmor_parser"
[ 8.985904] audit: type=1400 audit(1657746341.187:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=404
comm="apparmor_parser"
[ 8.985926] audit: type=1400 audit(1657746341.187:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=404
comm="apparmor_parser"
[ 8.985942] audit: type=1400 audit(1657746341.187:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=404
comm="apparmor_parser"
[ 8.986120] audit: type=1400 audit(1657746341.187:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=403
comm="apparmor_parser"
[ 8.986129] audit: type=1400 audit(1657746341.187:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=403 comm="apparmor_parser"
[ 8.994018] audit: type=1400 audit(1657746341.195:8): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/mips64el-linux-gnuabi64/lightdm/lightdm-guest-session" pid=401
comm="apparmor_parser"
[ 8.994039] audit: type=1400 audit(1657746341.195:9): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/mips64el-linux-gnuabi64/lightdm/lightdm-guest-session//chromium"
pid=401 comm="apparmor_parser"
[ 8.995086] audit: type=1400 audit(1657746341.195:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oosplash"
pid=407 comm="apparmor_parser"
[ 8.998165] audit: type=1400 audit(1657746341.199:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=408 comm="apparmor_parser"
[ 9.136770] Bluetooth: hci0: RTL: fw version 0x0999646b
[ 9.150110] systemd-journald[261]: Oldest entry in
/var/log/journal/ad4e6f11dbf94518994d5d221fbb16ba/system.journal is older than
the configured file retention duration (1month), suggesting rotation.
[ 9.150129] systemd-journald[261]:
/var/log/journal/ad4e6f11dbf94518994d5d221fbb16ba/system.journal: Journal
header limits reached or header out-of-date, rotating.
[ 9.387245] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.387264] Bluetooth: BNEP filters: protocol multicast
[ 9.387279] Bluetooth: BNEP socket layer initialized
[ 9.399923] NET: Registered PF_ALG protocol family
[ 12.660664] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
[ 12.671559] Bluetooth: RFCOMM TTY layer initialized
[ 12.671585] Bluetooth: RFCOMM socket layer initialized
[ 12.671602] Bluetooth: RFCOMM ver 1.11
[ 12.876428] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
** Model information
system type : Generic Loongson64 System
cpu model : ICT Loongson-3 V0.1 FPU V0.1
cpu model : ICT Loongson-3 V0.1 FPU V0.1
cpu model : ICT Loongson-3 V0.1 FPU V0.1
cpu model : ICT Loongson-3 V0.1 FPU V0.1
** Loaded modules:
tcp_diag
inet_diag
rfcomm
cmac
algif_hash
ecb
algif_skcipher
af_alg
bnep
binfmt_misc
btusb
btrtl
btbcm
btintel
btmtk
bluetooth
nls_ascii
nls_cp437
joydev
vfat
fat
evdev
jitterentropy_rng
sha512_generic
snd_hda_codec_hdmi
hid_generic
ctr
snd_hda_intel
snd_intel_dspcfg
drbg
snd_hda_codec
ansi_cprng
usbhid
hid
snd_hda_core
snd_hwdep
snd_pcm
snd_timer
ecdh_generic
rfkill
snd
igb
ecc
ptp
soundcore
xhci_pci
pps_core
xhci_hcd
parport_pc
parport
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
ohci_pci
amdgpu
drm_ttm_helper
ttm
gpu_sched
drm_dp_helper
nvme
drm_kms_helper
syscopyarea
sysfillrect
nvme_core
sysimgblt
fb_sys_fops
ohci_hcd
ehci_pci
drm
ehci_hcd
drm_panel_orientation_quirks
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Loongson Technology LLC Hyper Transport Bridge
Controller [0014:7a00]
Subsystem: Loongson Technology LLC Hyper Transport Bridge Controller
[0014:7a00]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:00.1 Non-VGA unclassified device [0000]: Loongson Technology LLC Hyper
Transport Bridge Controller [0014:7a10]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:04.0 USB controller [0c03]: Loongson Technology LLC OHCI USB Controller
[0014:7a24] (prog-if 10 [OHCI])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ohci@4,0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 39
NUMA node: 0
Region 0: Memory at 59510000 (64-bit, non-prefetchable) [size=32K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:04.1 USB controller [0c03]: Loongson Technology LLC EHCI USB Controller
[0014:7a14] (prog-if 20 [EHCI])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ehci@4,1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
NUMA node: 0
Region 0: Memory at 59518000 (64-bit, non-prefetchable) [size=32K]
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:05.0 USB controller [0c03]: Loongson Technology LLC OHCI USB Controller
[0014:7a24] (prog-if 10 [OHCI])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ohci@5,0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
NUMA node: 0
Region 0: Memory at 59520000 (64-bit, non-prefetchable) [size=32K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:05.1 USB controller [0c03]: Loongson Technology LLC EHCI USB Controller
[0014:7a14] (prog-if 20 [EHCI])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/ehci@5,1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
NUMA node: 0
Region 0: Memory at 59528000 (64-bit, non-prefetchable) [size=32K]
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:07.0 Audio device [0403]: Loongson Technology LLC HDA (High Definition
Audio) Controller [0014:7a07]
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/hda@7,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
NUMA node: 0
Region 0: Memory at 59500000 (64-bit, non-prefetchable) [size=64K]
00:08.0 SATA controller [0106]: Loongson Technology LLC SATA AHCI Controller
[0014:7a08] (prog-if 01 [AHCI 1.0])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/sata@8,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 13
NUMA node: 0
Region 0: Memory at 59530000 (64-bit, non-prefetchable) [size=8K]
Kernel driver in use: ahci
00:08.1 SATA controller [0106]: Loongson Technology LLC SATA AHCI Controller
[0014:7a08] (prog-if 01 [AHCI 1.0])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/sata@8,1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 14
NUMA node: 0
Region 0: Memory at 59532000 (64-bit, non-prefetchable) [size=8K]
Kernel driver in use: ahci
00:08.2 SATA controller [0106]: Loongson Technology LLC SATA AHCI Controller
[0014:7a08] (prog-if 01 [AHCI 1.0])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/sata@8,2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 15
NUMA node: 0
Region 0: Memory at 59534000 (64-bit, non-prefetchable) [size=8K]
Kernel driver in use: ahci
00:09.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge
[0014:7a19] (rev 01) (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@9,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 3
NUMA node: 0
Region 0: Memory at 59536000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: 59000000-590fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge
[0014:7a09] (rev 01) (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@b,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
NUMA node: 0
Region 0: Memory at 59537000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: 59100000-591fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge
[0014:7a09] (rev 01) (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@c,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 7
NUMA node: 0
Region 0: Memory at 59538000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: 59200000-592fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge
[0014:7a19] (rev 01) (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@d,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
NUMA node: 0
Region 0: Memory at 59539000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 20000-20fff [size=4K] [16-bit]
Memory behind bridge: 59300000-593fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 PCI bridge [0604]: Loongson Technology LLC PCI-to-PCI Bridge
[0014:7a29] (rev 01) (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/bus@10000000/pci@1a000000/pci_bridge@11,0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 12
NUMA node: 0
Region 0: Memory at 5953a000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 21000-21fff [size=4K] [16-bit]
Memory behind bridge: 59400000-594fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: 40000000-57ffffff [size=384M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 System peripheral [0880]: Loongson Technology LLC SPI Controller
[0014:7a0b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
NUMA node: 0
Region 0: Memory at 5953b000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at 58000000 (64-bit, non-prefetchable) [size=16M]
00:17.0 ISA bridge [0601]: Loongson Technology LLC LPC Controller [0014:7a0c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
NUMA node: 0
01:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
[1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 2
NUMA node: 0
Region 0: Memory at 59000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
02:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
[1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 4
NUMA node: 0
Region 0: Memory at 59100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
03:00.0 Non-Volatile memory controller [0108]: Kingston Technology Company,
Inc. A2000 NVMe SSD [2646:2263] (rev 03) (prog-if 02 [NVM Express])
Subsystem: Kingston Technology Company, Inc. A2000 NVMe SSD [2646:2263]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 6
NUMA node: 0
Region 0: Memory at 59200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
04:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network
Connection [8086:1539] (rev 03)
Subsystem: Intel Corporation I211 Gigabit Network Connection [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 8
NUMA node: 0
Region 0: Memory at 59300000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 20000 [size=32]
Region 3: Memory at 59320000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Polaris 20 XL [Radeon RX 580 2048SP] [1002:6fdf] (rev ef) (prog-if 00
[VGA controller])
Subsystem: ASUSTeK Computer Inc. Polaris 20 XL [Radeon RX 580 2048SP]
[1043:05b3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
NUMA node: 0
Region 0: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at 50000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at 21000 [size=256]
Region 5: Memory at 59400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 59440000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere
HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0]
Subsystem: ASUSTeK Computer Inc. Ellesmere HDMI Audio [Radeon RX
470/480 / 570/580/590] [1043:aaf0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 52
NUMA node: 0
Region 0: Memory at 59460000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
** USB devices:
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 275d:0ba6 USB OPTICAL MOUSE
Bus 004 Device 002: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0bda:8771 Realtek Semiconductor Corp. Bluetooth Radio
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: mips64el (mips64)
Kernel: Linux 5.18.0-4-loongson-3 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.18.0-4-loongson-3 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20220630-3
ii linux-base 4.9
Versions of packages linux-image-5.18.0-4-loongson-3 recommends:
ii apparmor 3.0.6-1
ii firmware-linux-free 20200122-1
ii pmon-update 0.3.1+b1
Versions of packages linux-image-5.18.0-4-loongson-3 suggests:
ii debian-kernel-handbook 1.0.19
pn linux-doc-5.18 <none>
Versions of packages linux-image-5.18.0-4-loongson-3 is related to:
ii firmware-amd-graphics 20210818-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20210818-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
