Your message dated Wed, 19 Feb 2025 16:25:44 +0100 (CET) with message-id <20250219152544.28af9be2...@eldamar.lan> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #1025735, regarding linux-image-6.0.0-5-amd64: Logitech camera only uses USB 1.1 (Full speed), not enough bandwidth to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 1025735: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1025735 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 6.0.10-2 Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? My Logitech Inc. QuickCam Communicate STX USB Webcam 046d:08d7 can't use USB 2.0, although the manufacturer says it supports it. It is not a hardware problem, I have the same camera 2 times and I tried different port and computers. It even happens on different machines. The port definitely supports USB 2.0, I have verified that with another USB device. That causes that the bandwidth is not enough for the higher resolutions. This results in a faulty image in certain applications like Firefox or Microsoft Edge. Message in dmesg [ 193.679885] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7 [ 194.761490] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/input/input17 [ 194.761984] usbcore: registered new interface driver gspca_zc3xx [ 195.504579] usbcore: registered new interface driver snd-usb-audio [ 668.959675] gspca_zc3xx 1-1.5:1.0: alt 6 - bandwidth not wide enough, trying again ##After I connected the camera [ 3752.435797] usb 1-1.5: new full-speed USB device number 7 using ehci-pci * What exactly did you do (or not do) that was effective (or ineffective)? Ineffective: Use another USB port, use another camera (same model) on the same machine * What was the outcome of this action? Same situation, camera only uses USB 1.1. Picture disturbed, camera not usable with high resolution. * What outcome did you expect instead? The camera should use USB 2.0 to provide enough bandwidth. *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 6.0.0-5-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-9) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC Debian 6.0.10-1 (2022-11-26) ** Command line: BOOT_IMAGE=/vmlinuz-6.0.0-5-amd64 root=UUID=7f90848d-f699-427b-a2ab-985f37001ee1 ro ** Tainted: OE (12288) * externally-built ("out-of-tree") module was loaded * unsigned module was loaded ** Kernel log: [ 184.833843] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 184.837297] systemd[1]: Starting Journal Service... [ 184.907298] fuse: init (API version 7.36) [ 184.988373] systemd[1]: Starting Load Kernel Modules... [ 184.990394] systemd[1]: Starting Remount Root and Kernel File Systems... [ 184.990751] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met. [ 184.992013] systemd[1]: Starting Coldplug All udev Devices... [ 184.995366] systemd[1]: Started Journal Service. [ 185.106308] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 185.359611] systemd-journald[488]: Received client request to flush runtime journal. [ 185.526550] lp: driver loaded but no devices found [ 185.561658] ppdev: user-space parallel port driver [ 191.939072] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 191.939864] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 191.940148] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 191.940410] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 191.950839] at24 0-0050: supply vcc not found, using dummy regulator [ 191.951561] at24 0-0050: 256 byte spd EEPROM, read-only [ 191.951694] at24 0-0051: supply vcc not found, using dummy regulator [ 191.952404] at24 0-0051: 256 byte spd EEPROM, read-only [ 191.952558] at24 0-0052: supply vcc not found, using dummy regulator [ 191.953839] at24 0-0052: 256 byte spd EEPROM, read-only [ 191.954006] at24 0-0053: supply vcc not found, using dummy regulator [ 191.955293] at24 0-0053: 256 byte spd EEPROM, read-only [ 192.052397] iTCO_vendor_support: vendor-support=0 [ 192.100384] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 192.337184] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 192.337300] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 192.337622] RAPL PMU: hw unit of domain package 2^-16 Joules [ 192.338363] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 192.363978] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 192.364289] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 192.541131] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 193.314923] mc: Linux media interface: v0.10 [ 193.316580] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 193.483036] videodev: Linux video capture interface: v2.00 [ 193.529810] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 193.529964] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 193.530392] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 193.531255] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 193.532140] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 193.532944] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 193.533767] snd_hda_codec_realtek hdaudioC0D0: Line=0x18 [ 193.566072] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 193.566335] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 193.566648] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 193.570512] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 193.571826] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 193.629763] intel_rapl_common: Found RAPL domain package [ 193.629956] intel_rapl_common: Found RAPL domain core [ 193.630296] intel_rapl_common: Found RAPL domain uncore [ 193.631125] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 193.641483] gspca_main: v2.14.0 registered [ 193.679885] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7 [ 194.761490] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/input/input17 [ 194.761984] usbcore: registered new interface driver gspca_zc3xx [ 194.797242] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 195.504579] usbcore: registered new interface driver snd-usb-audio [ 195.876173] audit: type=1400 audit(1670484550.566:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=695 comm="apparmor_parser" [ 195.917490] audit: type=1400 audit(1670484550.606:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=691 comm="apparmor_parser" [ 195.918247] audit: type=1400 audit(1670484550.606:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=693 comm="apparmor_parser" [ 195.920102] audit: type=1400 audit(1670484550.606:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=693 comm="apparmor_parser" [ 195.922000] audit: type=1400 audit(1670484550.606:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=693 comm="apparmor_parser" [ 195.924037] audit: type=1400 audit(1670484550.606:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=692 comm="apparmor_parser" [ 195.926195] audit: type=1400 audit(1670484550.606:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=692 comm="apparmor_parser" [ 195.994732] audit: type=1400 audit(1670484550.682:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=703 comm="apparmor_parser" [ 196.060401] audit: type=1400 audit(1670484550.750:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=702 comm="apparmor_parser" [ 196.061686] audit: type=1400 audit(1670484550.750:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=700 comm="apparmor_parser" [ 202.589867] NET: Registered PF_QIPCRTR protocol family [ 203.472021] kauditd_printk_skb: 7 callbacks suppressed [ 203.472028] audit: type=1400 audit(1670484558.158:19): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=868 comm="cupsd" capability=12 capname="net_admin" [ 206.686144] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 206.686213] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 208.619917] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 208.753990] vboxdrv: loading out-of-tree module taints kernel. [ 208.754279] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 208.781042] vboxdrv: Found 4 processor cores/threads [ 208.800330] vboxdrv: TSC mode is Invariant, tentative frequency 3092960953 Hz [ 208.800338] vboxdrv: Successfully loaded version 7.0.4_Debian r154605 (interface 0x00330004) [ 208.893977] VBoxNetFlt: Successfully started. [ 208.967138] VBoxNetAdp: Successfully started. [ 226.352901] systemd-journald[488]: Time jumped backwards, rotating. [ 440.601689] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. [ 550.964460] EXT4-fs (dm-1): unmounting filesystem. [ 668.959675] gspca_zc3xx 1-1.5:1.0: alt 6 - bandwidth not wide enough, trying again [ 671.563672] gspca_zc3xx 1-1.5:1.0: alt 5 - bandwidth not wide enough, trying again [ 674.271815] gspca_zc3xx 1-1.5:1.0: alt 4 - bandwidth not wide enough, trying again [ 1637.590480] gspca_zc3xx 1-1.5:1.0: alt 6 - bandwidth not wide enough, trying again [ 1640.206783] gspca_zc3xx 1-1.5:1.0: alt 5 - bandwidth not wide enough, trying again [ 1642.806460] gspca_zc3xx 1-1.5:1.0: alt 4 - bandwidth not wide enough, trying again [ 1691.052272] systemd[1]: systemd 252.2-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 1691.052457] systemd[1]: Detected architecture x86-64. [ 1691.347260] systemd-journald[488]: Received SIGTERM from PID 1 (systemd). [ 1691.348373] systemd[1]: Stopping Journal Service... [ 1691.444888] systemd[1]: fstrim.service: Deactivated successfully. [ 1691.445101] systemd[1]: Finished Discard unused blocks on filesystems from /etc/fstab. [ 1691.628486] systemd[1]: systemd-journald.service: Deactivated successfully. [ 1691.628676] systemd[1]: Stopped Journal Service. [ 1691.653876] systemd[1]: Starting Journal Service... [ 1691.689523] systemd[1]: Started Journal Service. ** Model information sys_vendor: Hewlett-Packard product_name: HP Compaq 8200 Elite CMT PC product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: J01 v02.33 board_vendor: Hewlett-Packard board_name: 1494 board_version: ** Loaded modules: vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) sha512_ssse3 sha512_generic qrtr binfmt_misc gspca_zc3xx gspca_main intel_rapl_msr intel_rapl_common videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi videobuf2_v4l2 snd_usb_audio snd_hda_codec_realtek snd_hda_codec_generic videobuf2_common videodev snd_usbmidi_lib ledtrig_audio snd_rawmidi snd_seq_device snd_hda_intel mc snd_intel_dspcfg x86_pkg_temp_thermal snd_intel_sdw_acpi intel_powerclamp snd_hda_codec coretemp joydev snd_hda_core snd_hwdep kvm_intel kvm snd_pcm hp_wmi mei_wdt irqbypass snd_timer iTCO_wdt wmi_bmof platform_profile rapl sparse_keymap intel_cstate intel_uncore mei_hdcp snd rfkill intel_pmc_bxt serio_raw soundcore pcspkr iTCO_vendor_support at24 mei_me sg evdev mei watchdog tpm_infineon parport_pc ppdev lp parport efi_pstore fuse configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crypto_simd xts ecb hid_plantronics dm_crypt dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 multipath linear hid_generic usbhid hid raid0 md_mod sd_mod t10_pi crc64_rocksoft_generic sr_mod cdrom crc64_rocksoft crc_t10dif crct10dif_generic crc64 i915 nouveau mxm_wmi video drm_buddy i2c_algo_bit drm_display_helper crct10dif_pclmul crct10dif_common crc32_pclmul cec ahci crc32c_intel rc_core libahci drm_ttm_helper ttm libata drm_kms_helper psmouse scsi_mod ehci_pci ehci_hcd drm ghash_clmulni_intel e1000e i2c_i801 i2c_smbus usbcore cryptd scsi_common lpc_ich ptp pps_core usb_common wmi button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Subsystem: Hewlett-Packard Company 2nd Generation Core Processor Family DRAM Controller [103c:1494] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: snb_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: f8000000-faffffff [size=48M] [32-bit] Prefetchable memory behind bridge: d0000000-dfffffff [size=256M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 Display controller [0380]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) DeviceName: Onboard IGD Subsystem: Hewlett-Packard Company 2nd Generation Core Processor Family Integrated Graphics Controller [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 32 Region 0: Memory at fb000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family MEI Controller [103c:1494] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 Region 0: Memory at fb42a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family KT Controller [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at f0e0 [size=8] Region 1: Memory at fb429000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04) DeviceName: Onboard LAN Subsystem: Hewlett-Packard Company 82579LM Gigabit Network Connection (Lewisville) [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at fb400000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fb428000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [103c:1494] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fb427000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family High Definition Audio Controller [103c:1494] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 34 Region 0: Memory at fb420000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabled] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabled] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 27 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabled] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 28 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabled] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [103c:1494] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fb426000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) (prog-if 01 [Subtractive decode]) Subsystem: Hewlett-Packard Company 82801 PCI Bridge [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabled] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Q67 Express Chipset LPC Controller [8086:1c4e] (rev 04) Subsystem: Hewlett-Packard Company Q67 Express Chipset LPC Controller [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [103c:1494] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 30 Region 0: I/O ports at f0d0 [size=8] Region 1: I/O ports at f0c0 [size=4] Region 2: I/O ports at f0b0 [size=8] Region 3: I/O ports at f0a0 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at fb425000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family SMBus Controller [103c:1494] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fb424000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV44 [GeForce 6200 TurboCache] [10de:0161] (rev a1) (prog-if 00 [VGA controller]) Subsystem: LeadTek Research Inc. NV44 [GeForce 6200 TurboCache] [107d:56c4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau Kernel modules: nouveau ** USB devices: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 047f:4315 Plantronics, Inc. Poly Blackwire 8225 Series Bus 001 Device 004: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX Bus 001 Device 003: ID 13ba:0018 PCPlay Barcode PCP-BCG4209 Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 6.0.0-5-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-6.0.0-5-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.142 ii kmod 30+20220905-1 ii linux-base 4.9 Versions of packages linux-image-6.0.0-5-amd64 recommends: pn apparmor <none> ii firmware-linux-free 20200122-1 Versions of packages linux-image-6.0.0-5-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.06-7 pn linux-doc-6.0 <none> Versions of packages linux-image-6.0.0-5-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20221109-4 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
