Your message dated Thu, 20 Feb 2025 12:49:15 +0100 (CET) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #949231, regarding linux-image-4.19.0-6-amd64: USB3 stops working after resume from disk to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 949231: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=949231 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 4.19.67-2+deb10u2 Severity: normal Dear Maintainer, after a suspend-to-disk / resume cycle the front side USB3 Ports on my ESPRIMO Q900 no loger work. FYI, reportbug told me that: Your version of linux-image-4.19.0-6-amd64 (4.19.67-2+deb10u2) is newer than that in Debian! This was a stretch + bpo kernel system upgraded to buster, my guess is that's the reason for the kernel version. FWIW the problem did not occur with 4.19.0-5-bpo. Since reportbug did not capture xhci dmesg entries: [ 1.764387] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.764395] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 1.869268] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 1.869522] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd [ 1.869796] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.869800] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 [ 1.869804] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 1.872726] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd [ 2.208085] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [10548.444992] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [10548.445033] suspend_common(): xhci_pci_suspend+0x0/0xd0 [xhci_pci] returns -110 [10548.445061] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -110 [10548.445070] dpm_run_callback(): pci_pm_suspend+0x0/0x120 returns -110 [34750.955390] xhci_hcd 0000:02:00.0: Host halt failed, -110 [34750.955395] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [54572.844631] xhci_hcd 0000:02:00.0: Host halt failed, -110 [54572.844635] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [59539.584267] usb 3-1: new full-speed USB device number 2 using xhci_hcd [59610.253300] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59611.505294] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59611.837250] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59620.369419] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59621.177510] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59622.009529] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59622.473525] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [59959.888692] usb 3-1: reset full-speed USB device number 2 using xhci_hcd [88648.127030] usb 3-1: new full-speed USB device number 3 using xhci_hcd [92816.651683] xhci_hcd 0000:02:00.0: Host halt failed, -110 [92816.651688] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [92826.757288] xhci_hcd 0000:02:00.0: Abort failed to stop command ring: -110 [92826.773311] xhci_hcd 0000:02:00.0: Host halt failed, -110 [92826.773314] xhci_hcd 0000:02:00.0: xHCI host controller not responding, assume dead [92826.773321] xhci_hcd 0000:02:00.0: HC died; cleaning up -- Package-specific info: ** Version: Linux version 4.19.0-6-amd64 ([email protected]) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=/dev/mapper/sys-root ro quiet resume=/dev/mapper/sys-swap ** Not tainted ** Kernel log: [168594.181338] video LNXVIDEO:00: Restoring backlight state [168594.253809] systemd-udevd[11069]: Using default interface naming scheme 'v240'. [168594.253883] systemd-udevd[11069]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [168594.254045] systemd-udevd[11069]: Could not generate persistent MAC address for br0: No such file or directory [168594.511159] systemd-udevd[11069]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [168594.512819] br0: port 1(eno1.5) entered blocking state [168594.512824] br0: port 1(eno1.5) entered disabled state [168594.513197] device eno1.5 entered promiscuous mode [168594.516346] device eno1 entered promiscuous mode [168594.519699] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [168594.612145] systemd-udevd[11069]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [168594.625137] IPv6: ADDRCONF(NETDEV_UP): eno1.4: link is not ready [168594.652691] systemd-udevd[11069]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [168594.667904] IPv6: ADDRCONF(NETDEV_UP): eno1.1: link is not ready [168597.378981] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [168597.379222] IPv6: ADDRCONF(NETDEV_CHANGE): eno1.1: link becomes ready [168597.379355] IPv6: ADDRCONF(NETDEV_CHANGE): eno1.4: link becomes ready [168597.379512] br0: port 1(eno1.5) entered blocking state [168597.379516] br0: port 1(eno1.5) entered forwarding state [168597.379645] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [199199.898231] device eno1 left promiscuous mode [199199.898447] br0: port 1(eno1.5) entered disabled state [199199.899670] device eno1.5 left promiscuous mode [199199.899675] br0: port 1(eno1.5) entered disabled state [199200.247919] e1000e: eno1 NIC Link is Down [199200.989031] (NULL device *): firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode [199201.177803] Syncing filesystems ... [199201.178085] done. [199201.178089] Freezing user space processes ... (elapsed 0.002 seconds) done. [199201.180504] OOM killer disabled. [199201.180836] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [199201.180840] PM: Marking nosave pages: [mem 0x0009a000-0x000fffff] [199201.180847] PM: Marking nosave pages: [mem 0x20000000-0x201fffff] [199201.180874] PM: Marking nosave pages: [mem 0x40000000-0x401fffff] [199201.180901] PM: Marking nosave pages: [mem 0x9e4b9000-0x9e4fbfff] [199201.180906] PM: Marking nosave pages: [mem 0x9e77f000-0x9e966fff] [199201.180928] PM: Marking nosave pages: [mem 0x9ebae000-0xffffffff] [199201.184149] PM: Basic memory bitmaps created [199201.184668] PM: Preallocating image memory... done (allocated 216050 pages) [199206.439645] PM: Allocated 864200 kbytes in 5.25 seconds (164.60 MB/s) [199206.439646] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [199206.441763] Suspending console(s) (use no_console_suspend to debug) [199206.778822] ACPI: Preparing to enter system sleep state S4 [199206.779380] PM: Saving platform NVS memory [199206.783984] Disabling non-boot CPUs ... [199206.809245] smpboot: CPU 1 is now offline [199206.829614] smpboot: CPU 2 is now offline [199206.845077] smpboot: CPU 3 is now offline [199206.845894] PM: Creating hibernation image: [199207.489265] PM: Need to copy 213751 pages [199207.489272] PM: Normal pages needed: 213751 + 1024, available pages: 2787119 [199206.847692] PM: Restoring platform NVS memory [199206.849395] Enabling non-boot CPUs ... [199206.849487] x86: Booting SMP configuration: [199206.849490] smpboot: Booting Node 0 Processor 1 APIC 0x2 [199206.852651] cache: parent cpu1 should not be sleeping [199206.853095] CPU1 is up [199206.853151] smpboot: Booting Node 0 Processor 2 APIC 0x1 [199206.856351] cache: parent cpu2 should not be sleeping [199206.857227] CPU2 is up [199206.857289] smpboot: Booting Node 0 Processor 3 APIC 0x3 [199206.860426] cache: parent cpu3 should not be sleeping [199206.860954] CPU3 is up [199206.869741] ACPI: Waking up from system sleep state S4 [199206.938583] usb usb1: root hub lost power or was reset [199206.938671] usb usb2: root hub lost power or was reset [199206.942476] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [199206.942564] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [199206.949150] sd 0:0:0:0: [sda] Starting disk [199207.273935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [199207.273973] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [199207.276788] ata1.00: configured for UDMA/133 [199207.283078] usb 1-1: reset high-speed USB device number 2 using ehci-pci [199207.295062] usb 2-1: reset high-speed USB device number 2 using ehci-pci [199207.307465] ata2.00: configured for UDMA/100 [199207.747094] usb 2-1.4: reset full-speed USB device number 3 using ehci-pci [199208.063114] usb 2-1.5: reset full-speed USB device number 4 using ehci-pci [199208.655117] usb 2-1.5.1: reset low-speed USB device number 5 using ehci-pci [199209.219101] usb 2-1.5.3: reset low-speed USB device number 6 using ehci-pci [199209.560247] Restarting kernel threads ... done. [199209.561803] PM: Basic memory bitmaps freed [199209.561804] OOM killer enabled. [199209.561805] Restarting tasks ... done. [199209.562813] video LNXVIDEO:00: Restoring backlight state [199215.329798] systemd-udevd[15843]: Using default interface naming scheme 'v240'. [199215.329973] systemd-udevd[15843]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [199215.330282] systemd-udevd[15843]: Could not generate persistent MAC address for br0: No such file or directory [199216.172245] systemd-udevd[15843]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [199216.172615] br0: port 1(eno1.5) entered blocking state [199216.172616] br0: port 1(eno1.5) entered disabled state [199216.172680] device eno1.5 entered promiscuous mode [199216.174470] device eno1 entered promiscuous mode [199216.178275] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [199219.717026] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [199219.717246] br0: port 1(eno1.5) entered blocking state [199219.717248] br0: port 1(eno1.5) entered forwarding state [199219.717290] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [199223.257266] systemd-udevd[16011]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [199223.257559] systemd-udevd[16011]: Using default interface naming scheme 'v240'. [199223.512930] systemd-udevd[16011]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. ** Model information sys_vendor: FUJITSU product_name: ESPRIMO Q900 product_version: chassis_vendor: AOpen Inc. chassis_version: MPC-D1009 bios_vendor: American Megatrends Inc. bios_version: 1.05.1009 board_vendor: AOpen Inc. board_name: D1009 board_version: A1A3 ** Loaded modules: vhost_net vhost tap tun nfnetlink_queue bluetooth drbg ansi_cprng ecdh_generic nf_conntrack_netlink algif_skcipher af_alg devlink nft_chain_nat_ipv6 nf_nat_ipv6 ip6t_REJECT nf_reject_ipv6 nft_chain_nat_ipv4 xt_nat xt_REDIRECT ipt_MASQUERADE nf_nat_ipv4 nf_nat nfnetlink_log nft_counter ipt_REJECT nf_reject_ipv4 xt_tcpudp xt_state xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_NFLOG nft_compat x_tables nf_tables nfnetlink binfmt_misc autofs4 fuse nfsd auth_rpcgss nfs_acl nfs lockd grace fscache sunrpc bridge ext4 crc16 mbcache jbd2 fscrypto ecb f71882fg hwmon_vid 8021q garp stp mrp llc loop parport_pc ppdev lp parport dm_crypt snd_usb_audio intel_rapl snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp snd_hda_intel snd_hda_codec snd_hda_core arc4 coretemp snd_hwdep snd_seq_device iwldvm snd_pcm mac80211 kvm_intel i915 snd_timer kvm tpm_infineon tpm_tis tpm_tis_core tpm mei_wdt irqbypass drm_kms_helper iwlwifi pcc_cpufreq sg snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rng_core drm mei_me mei pcspkr i2c_algo_bit evdev cfg80211 joydev iTCO_wdt wmi iTCO_vendor_support button video intel_cstate soundcore intel_uncore rfkill intel_rapl_perf xfs dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod uas usb_storage sr_mod cdrom sd_mod crc32c_intel ahci libahci libata xhci_pci xhci_hcd aesni_intel ehci_pci ehci_hcd aes_x86_64 scsi_mod crypto_simd cryptd glue_helper i2c_i801 usbcore e1000e lpc_ich usb_common fan thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: AOPEN Inc. 2nd Generation Core Processor Family DRAM Controller [a0a0:0809] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: AOPEN Inc. 2nd Generation Core Processor Family Integrated Graphics Controller [a0a0:0809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 35 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: AOPEN Inc. 6 Series/C200 Series Chipset Family MEI Controller [a0a0:0809] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 26 Region 0: Memory at f7e2b000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 05) Subsystem: AOPEN Inc. 82579LM Gigabit Network Connection (Lewisville) [a0a0:0809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 36 Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7e29000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: AOPEN Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [a0a0:0809] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7e28000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: AOPEN Inc. 6 Series/C200 Series Chipset Family High Definition Audio Controller [a0a0:0809] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 33 Region 0: Memory at f7e20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f7d00000-f7dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: AOPEN Inc. 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [a0a0:0809] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7e27000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 05) Subsystem: AOPEN Inc. QM67 Express Chipset LPC Controller [a0a0:0809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: AOPEN Inc. 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller [a0a0:0809] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 27 Region 0: I/O ports at f0d0 [size=8] Region 1: I/O ports at f0c0 [size=4] Region 2: I/O ports at f0b0 [size=8] Region 3: I/O ports at f0a0 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7e26000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: AOPEN Inc. 6 Series/C200 Series Chipset Family SMBus Controller [a0a0:0809] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7e25000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0082] (rev 34) Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1301] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 34 Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 02:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI]) Subsystem: AOPEN Inc. uPD720200 USB 3.0 Host Controller [a0a0:0809] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci ** USB devices: Bus 002 Device 006: ID 045e:077d Microsoft Corp. Bus 002 Device 005: ID 413c:2011 Dell Computer Corp. Multimedia Pro Keyboard Bus 002 Device 004: ID 413c:1005 Dell Computer Corp. Multimedia Pro Keyboard Hub Bus 002 Device 003: ID 413c:a503 Dell Computer Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-debug'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-6-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-4.19.0-6-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-4.19.0-6-amd64 recommends: pn apparmor <none> ii firmware-linux-free 3.4 Versions of packages linux-image-4.19.0-6-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-1 ii grub-pc 2.02+dfsg1-20 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-6-amd64 is related to: ii firmware-amd-graphics 20190114-2 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20190114-2 pn firmware-libertas <none> ii firmware-linux-nonfree 20190114-2 ii firmware-misc-nonfree 20190114-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20190114-2 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
