Your message dated Thu, 20 Feb 2025 12:51:34 +0100 (CET) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #950616, regarding linux-image-5.4.0-3-686-pae: very slow speed for wired ethernet (upload) to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 950616: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=950616 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 5.4.13-1 Severity: normal Dear Maintainer, after the latest upgrade, the upload speed with this 32-bit kernel became very slow. Downgrading to kernel linux-image-4.19.0-6-686-pae solves the problem. speed linux-image-5.4.0-3-686-pae 700-750 KB/s speed linux-image-4.19.0-6-686-pae 90-95 MB/s Packages r8168-dkms and firmware-realtek are not installed. lsmod |grep r8169 r8169 73728 0 libphy 57344 2 r8169,realtek lshw -class network *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 02 serial: 00:19:99:7e:c1:a1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full ip=131.211.154.187 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:16 ioport:2000(size=256) memory:fc400000-fc400fff memory:fc900000-fc90ffff memory:fc420000-fc43ffff *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 02 serial: 00:19:99:7e:de:b4 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 latency=0 link=no multicast=yes port=MII resources: irq:17 ioport:3000(size=256) memory:fc500000-fc500fff memory:fca00000-fca0ffff memory:fc520000-fc53ffff -- Package-specific info: ** Version: Linux version 5.4.0-3-686-pae ([email protected]) (gcc version 9.2.1 20200110 (Debian 9.2.1-23)) #1 SMP Debian 5.4.13-1 (2020-01-19) ** Command line: BOOT_IMAGE=/vmlinuz-5.4.0-3-686-pae root=UUID=be578b7d-8d8d-4905-b653-290d1eafa4c3 ro ** Not tainted ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information ** Loaded modules: nfsv3 nfs_acl nfs lockd grace fscache ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nf_tables nfnetlink rfkill snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio joydev snd_hda_intel snd_intel_nhlt coretemp snd_hda_codec kvm snd_hda_core r8169 sg realtek snd_hwdep libphy tpm_infineon snd_pcm_oss tpm_tis serio_raw snd_mixer_oss tpm_tis_core snd_pcm iTCO_wdt irqbypass ppdev iTCO_vendor_support fschmd watchdog snd_timer pcspkr tpm snd parport_pc parport rng_core soundcore evdev acpi_cpufreq sunrpc loop ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic hid_cherry sr_mod sd_mod cdrom hid_generic usbhid hid i915 ata_generic ata_piix libata psmouse scsi_mod lpc_ich mfd_core i2c_i801 video i2c_algo_bit drm_kms_helper ehci_pci uhci_hcd ehci_hcd drm usbcore usb_common button ** Network interface configuration: *** /etc/network/interfaces: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet static address 131.211.154.187 netmask 255.255.254.0 network 131.211.154.0 broadcast 131.211.155.255 gateway 131.211.154.1 dns-nameservers 131.211.154.162 131.211.154.5 131.211.4.5 dns-search chem.uu.nl ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:19:99:7e:c1:a1 brd ff:ff:ff:ff:ff:ff inet 131.211.154.187/23 brd 131.211.155.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::219:99ff:fe7e:c1a1/64 scope link valid_lft forever preferred_lft forever 3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether 00:19:99:7e:de:b4 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth1: 0 0 0 0 0 0 0 0 0 0 32 0 0 0 0 0 lo: 479944 2146 0 0 0 0 0 0 479944 2146 0 0 0 0 0 0 eth0: 981092 10287 0 80 0 0 0 170 357451 1906 1 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 2938 total packets received 0 forwarded 0 incoming packets discarded 2769 incoming packets delivered 1879 requests sent out Icmp: 18 ICMP messages received 0 input ICMP message failed ICMP input histogram: echo requests: 18 21 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 3 echo replies: 18 IcmpMsg: InType8: 18 OutType0: 18 OutType3: 3 Tcp: 15 active connection openings 6 passive connection openings 0 failed connection attempts 2 connection resets received 4 connections established 4038 segments received 3773 segments sent out 11 segments retransmitted 0 bad segments received 31 resets sent Udp: 224 packets received 3 packets to unknown port received 0 packet receive errors 224 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 628 UdpLite: TcpExt: 8 TCP sockets finished time wait in fast timer 29 delayed acks sent 2383 packet headers predicted 216 acknowledgments not containing data payload received 1966 predicted acknowledgments TCPSackRecovery: 5 9 fast retransmits TCPLossProbes: 2 TCPDSACKRecv: 5 4 connections reset due to unexpected data 1 connections reset due to early user close TCPSackMerged: 2 TCPSackShiftFallback: 25 TCPRcvCoalesce: 131 TCPAutoCorking: 3 TCPOrigDataSent: 2500 TCPKeepAlive: 3 TCPDelivered: 2520 IpExt: InBcastPkts: 628 InOctets: 498912 OutOctets: 329747 InBcastOctets: 85032 InNoECTPkts: 2961 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03) Subsystem: Fujitsu Technology Solutions 4 Series Chipset DRAM Controller [1734:114c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions 4 Series Chipset Integrated Graphics Controller [1734:114c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1c40 [size=8] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB UHCI Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1820 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB UHCI Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 1840 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB UHCI Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 4: I/O ports at 1860 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB2 EHCI Controller [1734:114d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: Memory at fc804000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) HD Audio Controller [1734:1157] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 33 Region 0: Memory at fc800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00004000-00004fff [size=4K] Memory behind bridge: f0000000-f01fffff [size=2M] Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 30 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00005000-00005fff [size=4K] Memory behind bridge: f0400000-f05fffff [size=2M] Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 5 [8086:3a78] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 31 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff [size=4K] Memory behind bridge: fc400000-fc4fffff [size=1M] Prefetchable memory behind bridge: 00000000fc900000-00000000fc9fffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 6 [8086:3a7a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 32 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff [size=4K] Memory behind bridge: fc500000-fc5fffff [size=1M] Prefetchable memory behind bridge: 00000000fca00000-00000000fcafffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB UHCI Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB UHCI Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at 18a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB UHCI Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 18c0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) USB2 EHCI Controller [1734:114d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fc805000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02) Subsystem: Fujitsu Technology Solutions 82801JDO (ICH10DO) LPC Interface Controller [1734:114d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller [8086:3a00] (rev 02) (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller [1734:114d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 1c58 [size=8] Region 1: I/O ports at 1c4c [size=4] Region 2: I/O ports at 1c50 [size=8] Region 3: I/O ports at 1c48 [size=4] Region 4: I/O ports at 1c10 [size=16] Region 5: I/O ports at 1c00 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) SMBus Controller [1734:114d] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 0: Memory at fc806000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1100 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller [1734:114d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at 1c70 [size=8] Region 1: I/O ports at 1c64 [size=4] Region 2: I/O ports at 1c68 [size=8] Region 3: I/O ports at 1c60 [size=4] Region 4: I/O ports at 1c30 [size=16] Region 5: I/O ports at 1c20 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.6 Signal processing controller [1180]: Intel Corporation 82801JD/DO (ICH10 Family) Thermal Subsystem [8086:3a62] (rev 02) Subsystem: Fujitsu Technology Solutions 82801JD/DO (ICH10 Family) Thermal Subsystem [1734:114d] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 9 Region 0: Memory at fc807000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02) Subsystem: Fujitsu Technology Solutions RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1734:1159] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at fc400000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fc900000 (64-bit, prefetchable) [size=64K] Expansion ROM at fc420000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02) Subsystem: Fujitsu Technology Solutions RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1734:1159] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at fc500000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fca00000 (64-bit, prefetchable) [size=64K] Expansion ROM at fc520000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 003: ID 046a:0023 Cherry GmbH Keyboard Bus 006 Device 002: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse] Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 5.4.0-3-686-pae (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.4.0-3-686-pae depends on: ii initramfs-tools [linux-initramfs-tool] 0.136 ii kmod 26+20191223-1 ii linux-base 4.6 Versions of packages linux-image-5.4.0-3-686-pae recommends: ii apparmor 2.13.3-7 ii firmware-linux-free 3.4 Versions of packages linux-image-5.4.0-3-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.04-5 pn linux-doc-5.4 <none> Versions of packages linux-image-5.4.0-3-686-pae is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
