Your message dated Thu, 20 Feb 2025 12:53:37 +0100 (CET) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #952376, regarding linux-image-4.19.0-8-amd64: TrackPoint drifting on Lenovo ThinkPad x250 to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 952376: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=952376 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 4.19.98-1 Severity: normal Dear Maintainer, After the update of the linux-kernel from version 4.19.0-6 to 4.19.0-8 the mouse pointer constantly drifts slowly, when the mouse is controlled by the TrackPoint of my laptop. I expect the problem to be caused by the driver for the TrackPoint. I did not troubleshoot the problem further, but will downgrade the Kernel back to version 4.19-0-6.. *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 4.19.0-8-amd64 ([email protected]) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.98-1 (2020-01-26) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=ae8f8875-f33c-4ab1-a697-30c927078fe2 ro quiet ** Not tainted ** Kernel log: [ 12.995858] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 13.022902] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:60:66:23:50:e3 [ 783.247887] e1000e: enp0s25 NIC Link is Down [ 783.358527] PM: suspend entry (deep) [ 783.358529] PM: Syncing filesystems ... done. [ 783.456463] (NULL device *): firmware: direct-loading firmware iwlwifi-7265D-29.ucode [ 783.456486] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 783.457427] OOM killer disabled. [ 783.457428] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 783.458577] Suspending console(s) (use no_console_suspend to debug) [ 783.458797] wlp3s0: deauthenticating from e0:60:66:23:50:e3 by local choice (Reason: 3=DEAUTH_LEAVING) [ 783.467842] iwlwifi 0000:03:00.0: offset 0 not used in fw key table. [ 783.467846] wlp3s0: failed to remove key (5, ff:ff:ff:ff:ff:ff) from hardware (-2) [ 783.525531] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 783.525645] sd 2:0:0:0: [sdb] Stopping disk [ 783.529526] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 783.539319] sd 0:0:0:0: [sda] Stopping disk [ 783.708032] e1000e: EEE TX LPI TIMER: 00000011 [ 784.038980] ACPI: EC: interrupt blocked [ 784.078196] ACPI: Preparing to enter system sleep state S3 [ 784.082680] ACPI: EC: event blocked [ 784.082681] ACPI: EC: EC stopped [ 784.082683] PM: Saving platform NVS memory [ 784.082708] Disabling non-boot CPUs ... [ 784.099848] smpboot: CPU 1 is now offline [ 784.123406] smpboot: CPU 2 is now offline [ 784.146975] smpboot: CPU 3 is now offline [ 784.152020] ACPI: Low-level resume complete [ 784.152069] ACPI: EC: EC started [ 784.152070] PM: Restoring platform NVS memory [ 784.154890] Enabling non-boot CPUs ... [ 784.154925] x86: Booting SMP configuration: [ 784.154926] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 784.155428] cache: parent cpu1 should not be sleeping [ 784.155826] CPU1 is up [ 784.155848] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 784.157760] cache: parent cpu2 should not be sleeping [ 784.157988] CPU2 is up [ 784.158008] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 784.158542] cache: parent cpu3 should not be sleeping [ 784.158989] CPU3 is up [ 784.167914] ACPI: Waking up from system sleep state S3 [ 784.174424] ACPI: EC: interrupt unblocked [ 784.237072] ACPI: EC: event unblocked [ 784.237904] sd 0:0:0:0: [sda] Starting disk [ 784.237906] sd 2:0:0:0: [sdb] Starting disk [ 784.487696] usb 2-7: reset full-speed USB device number 3 using xhci_hcd [ 784.550323] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 784.551899] ata3.00: LPM support broken, forcing max_power [ 784.552223] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 784.552225] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 784.552227] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 784.552286] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 784.553131] ata3.00: LPM support broken, forcing max_power [ 784.553244] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 784.553245] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 784.553247] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 784.553284] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 784.553429] ata3.00: configured for UDMA/133 [ 784.763777] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [ 785.039773] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [ 785.195545] acpi LNXPOWER:02: Turning OFF [ 785.195879] OOM killer enabled. [ 785.195880] Restarting tasks ... [ 785.210214] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 785.211142] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 785.211149] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 785.212214] done. [ 785.267372] PM: suspend exit [ 785.423177] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 785.440209] Bluetooth: hci0: Intel firmware patch completed and activated [ 786.547644] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 786.821631] ata1.00: LPM support broken, forcing max_power [ 786.839102] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 786.839106] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 786.839109] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 786.878438] ata1.00: LPM support broken, forcing max_power [ 786.895919] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 786.895923] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 786.895926] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 786.922363] ata1.00: configured for UDMA/133 [ 787.307825] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 787.519890] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 787.522150] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 787.525176] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 787.532650] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 787.749416] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 790.935086] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 791.941622] wlp3s0: authenticate with e0:60:66:23:50:e3 [ 791.946319] wlp3s0: send auth to e0:60:66:23:50:e3 (try 1/3) [ 792.047999] wlp3s0: send auth to e0:60:66:23:50:e3 (try 2/3) [ 792.061920] wlp3s0: authenticated [ 792.064009] wlp3s0: associate with e0:60:66:23:50:e3 (try 1/3) [ 792.078579] wlp3s0: RX AssocResp from e0:60:66:23:50:e3 (capab=0x11 status=0 aid=1) [ 792.080265] wlp3s0: associated [ 792.098320] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 792.106954] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:60:66:23:50:e3 [ 1101.338243] usb 2-6: reset full-speed USB device number 2 using xhci_hcd [ 1251.470334] usb 2-6: reset full-speed USB device number 2 using xhci_hcd Swipe your finger across the fingerprint reader ** Model information sys_vendor: LENOVO product_name: 20CMCTO1WW product_version: ThinkPad X250 chassis_vendor: LENOVO chassis_version: None bios_vendor: LENOVO bios_version: N10ET33W (1.12 ) board_vendor: LENOVO board_name: 20CMCTO1WW board_version: SDK0E50512 STD ** Loaded modules: ctr ccm fuse cmac bnep uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common btusb videodev btrtl btbcm btintel media bluetooth drbg ansi_cprng ecdh_generic binfmt_misc intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 msr joydev iwlmvm kvm mei_wdt mac80211 irqbypass crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel snd_hda_codec_hdmi intel_cstate snd_hda_codec_generic intel_uncore iwlwifi rtsx_pci_ms snd_hda_intel intel_rapl_perf rmi_smbus mei_me snd_hda_codec serio_raw iTCO_wdt iTCO_vendor_support memstick sg snd_hda_core wmi_bmof pcspkr rmi_core cfg80211 mei thinkpad_acpi snd_hwdep intel_pch_thermal nvram snd_pcm rfkill tpm_tis tpm_tis_core battery ac tpm snd_timer pcc_cpufreq rng_core snd soundcore evdev parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sd_mod i915 crc32c_intel rtsx_pci_sdmmc mmc_core ahci i2c_algo_bit libahci xhci_pci xhci_hcd libata aesni_intel ehci_pci ehci_hcd aes_x86_64 crypto_simd cryptd glue_helper drm_kms_helper psmouse usbcore scsi_mod lpc_ich rtsx_pci drm i2c_i801 mfd_core e1000e thermal usb_common wmi video button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 09) Subsystem: Lenovo Broadwell-U Host Bridge -OPI [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: bdw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo HD Graphics 5500 [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 09) Subsystem: Lenovo Broadwell-U Audio Controller [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f1230000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI]) Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller [17aa:2226] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 43 Region 0: Memory at f1220000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI Controller #1 [8086:9cba] (rev 03) Subsystem: Lenovo Wildcat Point-LP MEI Controller [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at f1239000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (3) I218-LM [8086:15a2] (rev 03) Subsystem: Lenovo Ethernet Connection (3) I218-LM [17aa:2226] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 48 Region 0: Memory at f1200000 (32-bit, non-prefetchable) [disabled] [size=128K] Region 1: Memory at f123e000 (32-bit, non-prefetchable) [disabled] [size=4K] Region 2: I/O ports at 3080 [disabled] [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03) Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at f1234000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 [8086:9c9a] (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f1100000-f11fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 [8086:9c94] (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f1000000-f10fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB EHCI Controller [8086:9ca6] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller [17aa:2226] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f123d000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc3] (rev 03) Subsystem: Lenovo Wildcat Point-LP LPC Controller [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at 30a8 [size=8] Region 1: I/O ports at 30b4 [size=4] Region 2: I/O ports at 30a0 [size=8] Region 3: I/O ports at 30b0 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at f123c000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller [8086:9ca2] (rev 03) Subsystem: Lenovo Wildcat Point-LP SMBus Controller [17aa:2226] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f1238000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.6 Signal processing controller [1180]: Intel Corporation Wildcat Point-LP Thermal Management Controller [8086:9ca4] (rev 03) Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f123b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01) Subsystem: Lenovo RTS5227 PCI Express Card Reader [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f1100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095b] (rev 59) Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5210] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f1000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi ** USB devices: Bus 001 Device 002: ID 8087:8001 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 04ca:703c Lite-On Technology Corp. Bus 002 Device 003: ID 8087:0a2a Intel Corp. Bus 002 Device 002: ID 138a:0017 Validity Sensors, Inc. VFS 5011 fingerprint sensor Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-8-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-8-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-4.19.0-8-amd64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 Versions of packages linux-image-4.19.0-8-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02+dfsg1-20 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-8-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 20190114-2 pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
