Your message dated Thu, 20 Feb 2025 13:20:48 +0100 (CET) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #969308, regarding linux-image-5.3.0-kali3-amd64: Logitech wireless kbd/mouse model EX110 erroneously detected as Logitech LX710 to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 969308: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=969308 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 5.3.15-1kali1 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Recent dist-upgrade, Logitech EX110 kbd/mouse not detected properly after upgrade, detected as Logitech LX710 * What exactly did you do (or not do) that was effective (or ineffective)? rebooted into 2019.2 release * What was the outcome of this action? verified kbd/mouse properly detected in this release * What outcome did you expect instead? *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 5.3.0-kali3-amd64 ([email protected]) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.3.15-1kali1 (2019-12-09) ** Command line: BOOT_IMAGE=/vmlinuz-5.3.0-kali3-amd64 root=/dev/mapper/notwin12--vg-root ro initrd=/install/gtk/initrd.gz quiet splash ** Not tainted ** Kernel log: [3024075.518455] usb 6-1: USB disconnect, device number 4 [3024075.518460] usb 6-1.1: USB disconnect, device number 5 [3024079.182403] usb 6-1: new full-speed USB device number 6 using uhci_hcd [3024079.355404] usb 6-1: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 1.00 [3024079.355409] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [3024079.359822] hub 6-1:1.0: USB hub found [3024079.361404] hub 6-1:1.0: 4 ports detected [3024079.658370] usb 6-1.1: new low-speed USB device number 7 using uhci_hcd [3024079.847401] usb 6-1.1: New USB device found, idVendor=046d, idProduct=c517, bcdDevice=38.10 [3024079.847405] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [3024079.847408] usb 6-1.1: Product: USB Receiver [3024079.847411] usb 6-1.1: Manufacturer: Logitech [3024079.878602] logitech-djreceiver 0003:046D:C517.0005: hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0 [3024080.010622] logitech-djreceiver 0003:046D:C517.0006: hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1 ** Model information sys_vendor: Intel Corporation product_name: Milstead Platform product_version: 2.2 chassis_vendor: Intel Corporation chassis_version: 1.0 bios_vendor: Phoenix Technologies Ltd. bios_version: CDV WSS 03 board_vendor: Intel Corporation board_name: Granite Well board_version: FABA ** Loaded modules: rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace sunrpc md4 sha512_ssse3 sha512_generic cmac nls_utf8 cifs gcm dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat efi_pstore intel_powerclamp coretemp rt2800usb rt2x00usb rt2800lib rt2x00lib mac80211 serio_raw efivars pcspkr cfg80211 crc_ccitt rfkill libarc4 snd_hda_codec_hdmi sg snd_hda_intel iTCO_wdt iTCO_vendor_support snd_hda_codec watchdog snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore evdev efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_mod hid_logitech_dj uas usb_storage hid_generic usbhid hid sd_mod ahci libahci psmouse libata i2c_i801 scsi_mod gma500_gfx lpc_ich xhci_pci mfd_core i2c_algo_bit xhci_hcd uhci_hcd ehci_pci ehci_hcd drm_kms_helper e1000e usbcore ptp pps_core usb_common drm video button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:0bf3] (rev 04) Subsystem: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:1999] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be2] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:1999] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=1M] Region 1: I/O ports at 40d0 [size=8] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: gma500 Kernel modules: gma500_gfx 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 40a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Device [1c3d:1a1b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f0404c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: Device [1c3d:1a1b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff [size=4K] Memory behind bridge: f0200000-f02fffff [size=1M] Prefetchable memory behind bridge: 0000000080000000-00000000801fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 25 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff [size=4K] Memory behind bridge: f0100000-f01fffff [size=1M] Prefetchable memory behind bridge: 0000000080200000-00000000803fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 26 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00005000-00005fff [size=4K] Memory behind bridge: 80400000-805fffff [size=2M] Prefetchable memory behind bridge: 0000000080600000-00000000807fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 27 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00006000-00006fff [size=4K] Memory behind bridge: 80800000-809fffff [size=2M] Prefetchable memory behind bridge: 0000000080a00000-0000000080bfffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00007000-00007fff [size=4K] Memory behind bridge: f0000000-f00fffff [size=1M] Prefetchable memory behind bridge: 0000000080c00000-0000000080dfffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 29 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00008000-00008fff [size=4K] Memory behind bridge: 80e00000-80ffffff [size=2M] Prefetchable memory behind bridge: 0000000081000000-00000000811fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 4080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 4060 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 4040 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Device [1c3d:1a1b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0404800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: None Memory behind bridge: None Prefetchable memory behind bridge: None Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0]) Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 39 Region 0: I/O ports at 40c8 [size=8] Region 1: I/O ports at 40dc [size=4] Region 2: I/O ports at 40c0 [size=8] Region 3: I/O ports at 40d8 [size=4] Region 4: I/O ports at 4020 [size=32] Region 5: Memory at f0404000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: Device [1c3d:1a1b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f0405000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: Intel Corporation 82574L Gigabit Network Connection [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0200000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 3000 [size=32] Region 3: Memory at f0220000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: Intel Corporation 82574L Gigabit Network Connection [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Region 3: Memory at f0120000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 05:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci ** USB devices: Bus 005 Device 004: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 005 Device 008: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 007: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 006 Device 006: ID 0557:7000 ATEN International Co., Ltd Hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Distributor ID: Kali Description: Kali GNU/Linux Rolling Release: 2019.4 Codename: kali-rolling Architecture: x86_64 Kernel: Linux 5.3.0-kali3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.3.0-kali3-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.135 ii kmod 26-3 ii linux-base 4.6 Versions of packages linux-image-5.3.0-kali3-amd64 recommends: ii apparmor 2.13.3-7 ii firmware-linux-free 3.4 Versions of packages linux-image-5.3.0-kali3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.04-4kali1 pn linux-doc-5.3 <none> Versions of packages linux-image-5.3.0-kali3-amd64 is related to: ii firmware-amd-graphics 20190717-2 ii firmware-atheros 20190717-2 ii firmware-bnx2 20190717-2 pn firmware-bnx2x <none> ii firmware-brcm80211 20190717-2 pn firmware-cavium <none> pn firmware-intel-sound <none> ii firmware-intelwimax 20190717-2 ii firmware-ipw2x00 20190717-2 pn firmware-ivtv <none> ii firmware-iwlwifi 20190717-2 ii firmware-libertas 20190717-2 ii firmware-linux-nonfree 20190717-2 ii firmware-misc-nonfree 20190717-2 pn firmware-myricom <none> ii firmware-netxen 20190717-2 pn firmware-qlogic <none> ii firmware-realtek 20190717-2 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
