Your message dated Thu, 20 Feb 2025 14:51:39 +0100 (CET) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #1012578, regarding linux-image-5.18.0-1-amd64: 05e3:0722 Genesys Logic, Inc. SD/MMC card reader doesn't see the card to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 1012578: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012578 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 5.18.2-1 Severity: normal Dear Maintainer, that is card reader itself is being seen by the system: lsusb -d 05e3:0722 Bus 001 Device 004: ID 05e3:0722 Genesys Logic, Inc. SD/MMC card reader but it doesn't see the card: dmesg -T | grep sdc [Thu Jun 9 15:30:09 2022] sd 7:0:0:0: [sdc] Media removed, stopped polling [Thu Jun 9 15:30:09 2022] sd 7:0:0:0: [sdc] Attached SCSI removable disk mount /dev/sdc /mnt/sdcard mount: /mnt/sdcard: no medium found on /dev/sdc. I have explored the driver: modinfo usb-storage | grep -i v05e3p0722 and it looks like there is no support for this device (no output from command above), but I am not sure it is the case. In any case the system doesn't react nighter on inserting or removing the card. I have recompiled this module where supported device 05e3:0723 was replaced by 05e3:0722 without any changes in system behaviour, though I understand it is not the right method. I have checked this card on another system (notebook) and it works properly. Here is additional information that may help: udevadm info /dev/bus/usb/001/004 P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4 M: 1-1.4 R: 4 U: usb T: usb_device D: c 189:3 N: bus/usb/001/004 L: 0 V: usb E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4 E: DEVNAME=/dev/bus/usb/001/004 E: DEVTYPE=usb_device E: DRIVER=usb E: PRODUCT=5e3/722/9843 E: TYPE=0/0/0 E: BUSNUM=001 E: DEVNUM=004 E: MAJOR=189 E: MINOR=3 E: SUBSYSTEM=usb E: USEC_INITIALIZED=2168312 E: ID_VENDOR=Generic E: ID_VENDOR_ENC=Generic E: ID_VENDOR_ID=05e3 E: ID_MODEL=USB_Storage E: ID_MODEL_ENC=USB\x20Storage E: ID_MODEL_ID=0722 E: ID_REVISION=9843 E: ID_SERIAL=Generic_USB_Storage_000000009843 E: ID_SERIAL_SHORT=000000009843 E: ID_BUS=usb E: ID_USB_INTERFACES=:080650: E: ID_VENDOR_FROM_DATABASE=Genesys Logic, Inc. E: ID_MODEL_FROM_DATABASE=SD/MMC card reader E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4 E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4 E: ID_FOR_SEAT=usb-pci-0000_00_1a_0-usb-0_1_4 E: TAGS=:seat: E: CURRENT_TAGS=:seat: udevadm info /dev/sdc P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host7/target7:0:0/7:0:0:0/block/sdc M: sdc U: block T: disk D: b 8:32 N: sdc L: 0 S: disk/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-scsi-0:0:0:0 S: disk/by-diskseq/16 S: disk/by-id/usb-Generic_STORAGE_DEVICE_000000009843-0:0 Q: 16 E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host7/target7:0:0/7:0:0:0/block/sdc E: DEVNAME=/dev/sdc E: DEVTYPE=disk E: DISKSEQ=16 E: MAJOR=8 E: MINOR=32 E: SUBSYSTEM=block E: USEC_INITIALIZED=3242303 E: ID_VENDOR=Generic E: ID_VENDOR_ENC=Generic\x20 E: ID_VENDOR_ID=05e3 E: ID_MODEL=STORAGE_DEVICE E: ID_MODEL_ENC=STORAGE\x20DEVICE\x20\x20 E: ID_MODEL_ID=0722 E: ID_REVISION=9843 E: ID_SERIAL=Generic_STORAGE_DEVICE_000000009843-0:0 E: ID_SERIAL_SHORT=000000009843 E: ID_TYPE=disk E: ID_INSTANCE=0:0 E: ID_BUS=usb E: ID_USB_INTERFACES=:080650: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usb-storage E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4:1.0-scsi-0:0:0:0 E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4_1_0-scsi-0_0_0_0 E: UDISKS_PRESENTATION_NOPOLICY=0 E: DEVLINKS=/dev/disk/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-scsi-0:0:0:0 /dev/disk/by-diskseq/16 /dev/disk/by-id/usb-Generic_STORAGE_DEVICE_000000009843-0:0 E: TAGS=:systemd: E: CURRENT_TAGS=:systemd: lsusb -D /dev/bus/usb/001/004 Device: ID 05e3:0722 Genesys Logic, Inc. SD/MMC card reader Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0722 SD/MMC card reader bcdDevice 98.43 iManufacturer 3 Generic iProduct 4 USB Storage iSerial 2 000000009843 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) -- Package-specific info: ** Version: Linux version 5.18.0-1-amd64 ([email protected]) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1 (2022-06-06) ** Command line: BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64 root=/dev/mapper/sys-apex ro ipv6.disable=1 ** Tainted: POE (12289) * proprietary module was loaded * externally-built ("out-of-tree") module was loaded * unsigned module was loaded ** Kernel log: [ 18.266366] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 18.266369] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 18.515487] videodev: Linux video capture interface: v2.00 [ 18.738236] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 18.906937] usb 2-2: set resolution quirk: cval->res = 384 [ 18.907730] usbcore: registered new interface driver snd-usb-audio [ 18.907774] usb 2-2: Found UVC 1.00 device <unnamed> (046d:0825) [ 18.948369] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/input/input19 [ 18.948582] usbcore: registered new interface driver uvcvideo [ 19.574697] Bluetooth: Core ver 2.22 [ 19.574733] NET: Registered PF_BLUETOOTH protocol family [ 19.574735] Bluetooth: HCI device and connection manager initialized [ 19.574739] Bluetooth: HCI socket layer initialized [ 19.574741] Bluetooth: L2CAP socket layer initialized [ 19.574746] Bluetooth: SCO socket layer initialized [ 19.699514] usbcore: registered new interface driver btusb [ 23.265229] usb 2-2: reset high-speed USB device number 3 using xhci_hcd [ 24.350008] audit: type=1400 audit(1654788632.192:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1123 comm="apparmor_parser" [ 24.350020] audit: type=1400 audit(1654788632.192:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1123 comm="apparmor_parser" [ 24.387812] audit: type=1400 audit(1654788632.228:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1122 comm="apparmor_parser" [ 24.481647] audit: type=1400 audit(1654788632.324:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1125 comm="apparmor_parser" [ 24.481654] audit: type=1400 audit(1654788632.324:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1125 comm="apparmor_parser" [ 24.481657] audit: type=1400 audit(1654788632.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1125 comm="apparmor_parser" [ 24.498922] audit: type=1400 audit(1654788632.340:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1124 comm="apparmor_parser" [ 24.501788] audit: type=1400 audit(1654788632.344:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=1121 comm="apparmor_parser" [ 24.501794] audit: type=1400 audit(1654788632.344:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=1121 comm="apparmor_parser" [ 24.502784] audit: type=1400 audit(1654788632.344:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=1126 comm="apparmor_parser" [ 26.334401] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw [ 26.360997] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 26.525087] r8169 0000:03:00.0 eth0: Link is Down [ 27.520554] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.523881] br0: port 1(eth0) entered blocking state [ 27.523887] br0: port 1(eth0) entered disabled state [ 27.523967] device eth0 entered promiscuous mode [ 27.842029] tun: Universal TUN/TAP device driver, 1.6 [ 27.845623] br0: port 2(tap0) entered blocking state [ 27.845629] br0: port 2(tap0) entered disabled state [ 27.845684] device tap0 entered promiscuous mode [ 28.167475] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 29.036579] br0: port 1(eth0) entered blocking state [ 29.036595] br0: port 1(eth0) entered forwarding state [ 32.466023] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 32.466028] caller _nv000720rm+0x1ad/0x200 [nvidia] mapping multiple BARs [ 38.402631] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.402635] Bluetooth: BNEP filters: protocol multicast [ 38.402639] Bluetooth: BNEP socket layer initialized [ 38.580639] NET: Registered PF_ALG protocol family [ 39.205575] vboxdrv: Found 4 processor cores [ 39.225225] vboxdrv: TSC mode is Invariant, tentative frequency 3092837053 Hz [ 39.225228] vboxdrv: Successfully loaded version 6.1.34_Debian r150636 (interface 0x00320000) [ 39.411600] VBoxNetFlt: Successfully started. [ 39.568484] VBoxNetAdp: Successfully started. [ 50.189923] NET: Registered PF_QIPCRTR protocol family [ 50.469369] systemd-journald[411]: Time jumped backwards, rotating. [ 64.297327] usb 2-2: reset high-speed USB device number 3 using xhci_hcd [ 71.047572] Bluetooth: RFCOMM TTY layer initialized [ 71.047582] Bluetooth: RFCOMM socket layer initialized [ 71.047590] Bluetooth: RFCOMM ver 1.11 [ 95.155384] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 176.833571] usb 2-2: reset high-speed USB device number 3 using xhci_hcd [ 188.189494] usb 2-2: reset high-speed USB device number 3 using xhci_hcd [ 201.894628] input: EDIFIER W800BT Plus (AVRCP) as /devices/virtual/input/input20 [ 506.943972] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 631.830777] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 2818.221300] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8565.432174] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [10017.527894] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [10022.766877] ata1.00: exception Emask 0x0 SAct 0x80030008 SErr 0x0 action 0x6 [10022.766883] ata1.00: irq_stat 0x40000008 [10022.766887] ata1.00: failed command: READ FPDMA QUEUED [10022.766888] ata1.00: cmd 60/00:80:00:8a:b9/02:00:06:00:00/40 tag 16 ncq dma 262144 in res 41/84:00:1c:8b:b9/00:02:06:00:00/00 Emask 0x410 (ATA bus error) <F> [10022.766893] ata1.00: status: { DRDY ERR } [10022.766895] ata1.00: error: { ICRC ABRT } [10022.766898] ata1: hard resetting link [10023.081224] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [10023.157499] ata1.00: configured for UDMA/100 [10023.157522] sd 0:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [10023.157525] sd 0:0:0:0: [sda] tag#16 Sense Key : Aborted Command [current] [10023.157527] sd 0:0:0:0: [sda] tag#16 Add. Sense: Scsi parity error [10023.157529] sd 0:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 06 b9 8a 00 00 02 00 00 [10023.157530] I/O error, dev sda, sector 112822784 op 0x0:(READ) flags 0x80700 phys_seg 27 prio class 0 [10023.157548] ata1: EH complete [10028.244806] ata1.00: exception Emask 0x0 SAct 0x8700 SErr 0x0 action 0x6 [10028.244812] ata1.00: irq_stat 0x40000008 [10028.244815] ata1.00: failed command: READ FPDMA QUEUED [10028.244816] ata1.00: cmd 60/00:48:00:8f:d7/02:00:1b:00:00/40 tag 9 ncq dma 262144 in res 41/84:00:d0:8f:d7/00:02:1b:00:00/00 Emask 0x410 (ATA bus error) <F> [10028.244821] ata1.00: status: { DRDY ERR } [10028.244823] ata1.00: error: { ICRC ABRT } [10028.244827] ata1: hard resetting link [10028.557168] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [10028.633029] ata1.00: configured for UDMA/100 [10028.633052] sd 0:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [10028.633055] sd 0:0:0:0: [sda] tag#9 Sense Key : Aborted Command [current] [10028.633057] sd 0:0:0:0: [sda] tag#9 Add. Sense: Scsi parity error [10028.633059] sd 0:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 1b d7 8f 00 00 02 00 00 [10028.633060] I/O error, dev sda, sector 467111680 op 0x0:(READ) flags 0x80700 phys_seg 62 prio class 0 [10028.633078] ata1: EH complete [13385.270879] perf: interrupt took too long (3196 > 3133), lowering kernel.perf_event_max_sample_rate to 62500 ** Model information sys_vendor: LENOVO product_name: 10130 product_version: Lenovo H530 chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: LENOVO bios_version: IEKT40AUS board_vendor: LENOVO board_name: 367D board_version: 31900059 STD ** Loaded modules: uinput rfcomm qrtr vboxnetadp(OE) vboxnetflt(OE) cmac vboxdrv(OE) algif_hash algif_skcipher af_alg bnep overlay tun bridge stp llc binfmt_misc nls_ascii nls_cp437 vfat fat btusb btrtl btbcm btintel btmtk bluetooth jitterentropy_rng sha512_ssse3 sha512_generic drbg uvcvideo snd_usb_audio ansi_cprng videobuf2_vmalloc videobuf2_memops ecdh_generic videobuf2_v4l2 videobuf2_common snd_usbmidi_lib rfkill videodev snd_rawmidi ecc snd_seq_device intel_rapl_msr joydev mc mei_hdcp intel_rapl_common x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic kvm_intel ledtrig_audio kvm snd_hda_codec_hdmi irqbypass snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec rapl intel_cstate intel_uncore snd_hda_core snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm iTCO_wdt snd_timer snd intel_pmc_bxt mei_me soundcore iTCO_vendor_support watchdog at24 mei pcspkr serio_raw evdev sg efi_pstore nvidia_drm(POE) drm_kms_helper nvidia_modeset(POE) nvidia(POE) vhci_hcd usbip_vudc udc_core usbip_host usbip_core loop parport_pc ppdev lp parport drm fuse configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic xor raid6_pq zstd_compress libcrc32c crc32c_generic dm_mod hid_generic usbhid hid crc32_pclmul sd_mod crc32c_intel t10_pi crc64_rocksoft_generic sr_mod crc64_rocksoft crc_t10dif cdrom crct10dif_generic crct10dif_pclmul crc64 crct10dif_common uas ghash_clmulni_intel usb_storage ahci libahci libata aesni_intel crypto_simd xhci_pci cryptd psmouse scsi_mod i2c_i801 i2c_smbus xhci_hcd scsi_common lpc_ich ehci_pci ehci_hcd r8169 realtek video usbcore mdio_devres libphy usb_common fan button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06) Subsystem: Lenovo 4th Gen Core Processor DRAM Controller [17aa:367d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 IOMMU group: 0 Capabilities: <access denied> Kernel driver in use: hsw_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 IOMMU group: 1 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff [size=4K] Memory behind bridge: f6000000-f70fffff [size=17M] Prefetchable memory behind bridge: 00000000e8000000-00000000f1ffffff [size=160M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI]) Subsystem: Lenovo 8 Series/C220 Series Chipset Family USB xHCI [17aa:367d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 30 IOMMU group: 2 Region 0: Memory at f7200000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) Subsystem: Lenovo 8 Series/C220 Series Chipset Family MEI Controller [17aa:367d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 IOMMU group: 3 Region 0: Memory at f721a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Lenovo 8 Series/C220 Series Chipset Family USB EHCI [17aa:367d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 IOMMU group: 4 Region 0: Memory at f7218000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05) Subsystem: Lenovo 8 Series/C220 Series Chipset High Definition Audio Controller [17aa:367d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 IOMMU group: 5 Region 0: Memory at f7210000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 IOMMU group: 6 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff [size=4K] Memory behind bridge: e0000000-e01fffff [size=2M] Prefetchable memory behind bridge: 00000000e0200000-00000000e03fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 27 IOMMU group: 7 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff [size=4K] Memory behind bridge: f7100000-f71fffff [size=1M] Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Lenovo 8 Series/C220 Series Chipset Family USB EHCI [17aa:367d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 IOMMU group: 8 Region 0: Memory at f7217000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation H81 Express LPC Controller [8086:8c5c] (rev 05) Subsystem: Lenovo H81 Express LPC Controller [17aa:367d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 IOMMU group: 9 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [17aa:367d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 29 IOMMU group: 9 Region 0: I/O ports at f070 [size=8] Region 1: I/O ports at f060 [size=4] Region 2: I/O ports at f050 [size=8] Region 3: I/O ports at f040 [size=4] Region 4: I/O ports at f020 [size=32] Region 5: Memory at f7216000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05) Subsystem: Lenovo 8 Series/C220 Series Chipset Family SMBus Controller [17aa:367d] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 IOMMU group: 9 Region 0: Memory at f7215000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 635] [10de:1280] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GK208 [GeForce GT 635] [1462:2922] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 IOMMU group: 1 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at e000 [size=128] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia 01:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller [10de:0e0f] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] GK208 HDMI/DP Audio Controller [1462:2922] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 IOMMU group: 1 Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:367d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 IOMMU group: 10 Region 0: I/O ports at d000 [size=256] Region 2: Memory at f7100000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 ** USB devices: Bus 020 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 019 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 018 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 017 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 016 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 015 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 014 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 013 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 05e3:0722 Genesys Logic, Inc. SD/MMC card reader Bus 001 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 005: ID 1c4f:0026 SiGma Micro Keyboard Bus 002 Device 004: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 002 Device 003: ID 046d:0825 Logitech, Inc. Webcam C270 Bus 002 Device 002: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: bookworm/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.18.0-1-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.utf8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /bin/bash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.18.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.141 ii kmod 29-1+b1 ii linux-base 4.9 Versions of packages linux-image-5.18.0-1-amd64 recommends: ii apparmor 3.0.4-2 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.18.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-3+b1 ii grub-efi-amd64 2.06-2 pn linux-doc-5.18 <none> Versions of packages linux-image-5.18.0-1-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20210818-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20210818-1 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
