Package: src:linux Version: 6.12.48-1 Severity: normal X-Debbugs-Cc: [email protected]
Hi, I have three Raspberry Pi Zero W running trixie headless. All stopped working after upgrading to linux-image-6.12.48+deb13-rpi. Since they are headless, I removed the SD card and checked the logs on there. The last logs where from upgrading to linux-image-6.12.48+deb13-rpi and the shutdown (from the reboot). There were no logs from the linux-image-6.12.48+deb13-rpi boot. So it probably failed to boot in the kernel or initrd (before switching to the root fs). I changed the kernel+initrd in /boot/firmware/config.txt from 6.12.48+deb13-rpi to 6.12.43+deb13-rpi and then the system worked again. I checked that content of the initrd looks okay (only the kernel module versions differ). -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information Hardware : BCM2835 Revision : 0000 Device Tree model: Raspberry Pi Zero W Rev 1.1 ** Configuration for modprobe: blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist vt8623fb options snd_pcsp index=-2 options cx88_alsa index=-2 options snd_atiixp_modem index=-2 options snd_intel8x0m index=-2 options snd_via82xx_modem index=-2 options bonding max_bonds=0 options dummy numdummies=0 options ifb numifbs=0 options dma dmachans=0x7ff5 options bcm2708 boardrev=0x9000c1 options bcm2708 serial=0x8bb1238 options bcm2708 uart_clock=48000000 options bcm2708 disk_led_gpio=47 options smsc95xx macaddr=B8:27:EB:BB:12:38 options vc_mem mem_base=0x1ec00000 options vc_mem mem_size=0x20000000 options fsck repair=yes options net ifnames=0 ** Network interface configuration: *** /etc/network/interfaces: source-directory /etc/network/interfaces.d auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid Skynet wpa-psk ********************** ** PCI devices: not available ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 13.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') Architecture: armel (armv6l) Kernel: Linux 6.12.43+deb13-rpi (UP) Kernel taint flags: TAINT_CRAP Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-6.12.48+deb13-rpi depends on: ii initramfs-tools [linux-initramfs-tool] 0.148.3 ii kmod 34.2-2 ii linux-base 4.12 Versions of packages linux-image-6.12.48+deb13-rpi recommends: ii apparmor 4.1.0-1 Versions of packages linux-image-6.12.48+deb13-rpi suggests: pn debian-kernel-handbook <none> ii firmware-linux-free 20241210-2 pn linux-doc-6.12 <none> Versions of packages linux-image-6.12.48+deb13-rpi is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20250410-2 pn firmware-cavium <none> pn firmware-cirrus <none> pn firmware-intel-graphics <none> pn firmware-intel-misc <none> pn firmware-intel-sound <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-marvell-prestera <none> pn firmware-mediatek <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netronome <none> pn firmware-netxen <none> pn firmware-nvidia-graphics <none> pn firmware-qcom-soc <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information -- Benjamin Drung Debian & Ubuntu Developer
