Bisecting has been completed. And commit
aed157301c659a48f5564cc4568cf0e5c8831af0 has been identified as the
source of the issue:
$ git bisect log
git bisect start
# status: waiting for both good and bad commits
# good: [e9d65b48ce1aba50e9ec7eab6d9f73d1ba88420e] Linux 6.12.6
git bisect good e9d65b48ce1aba50e9ec7eab6d9f73d1ba88420e
# status: waiting for bad commit, 1 good commit known
# bad: [41b222412985dc8410b88fb7a0fda87e6640d4df] Linux 6.12.17
git bisect bad 41b222412985dc8410b88fb7a0fda87e6640d4df
# bad: [33e47d9573075342a41783a55c8c67bc71246fc1] bpf: Cancel the running
bpf_timer through kworker for PREEMPT_RT
git bisect bad 33e47d9573075342a41783a55c8c67bc71246fc1
# bad: [e7960da6f2f438d907c17d463364dae6d242f775] sched_ext: switch class
when preempted by higher priority scheduler
git bisect bad e7960da6f2f438d907c17d463364dae6d242f775
# bad: [9da1cfc4f111b7e4ea3d7f388b16b17bb881795e] Bluetooth: btusb:
mediatek: add callback function in btusb_disconnect
git bisect bad 9da1cfc4f111b7e4ea3d7f388b16b17bb881795e
# good: [416226eb3f3a3008456903fc3695b0efa8ceafa1] selftests/bpf: Use asm
constraint "m" for LoongArch
git bisect good 416226eb3f3a3008456903fc3695b0efa8ceafa1
# good: [6d9cd27105459f169993a4c5f216499a946dbf34] powerpc/pseries/vas: Add
close() callback in vas_vm_ops struct
git bisect good 6d9cd27105459f169993a4c5f216499a946dbf34
# good: [16b54ee81d8a44781ddeb5e577262d22c4e6c853] blk-mq: register cpuhp
callback after hctx is added to xarray table
git bisect good 16b54ee81d8a44781ddeb5e577262d22c4e6c853
# bad: [5e44779d12bd3cd3930d4b7566edec2ea69972b7] perf/x86/intel: Fix
bitmask of OCR and FRONTEND events for LNC
git bisect bad 5e44779d12bd3cd3930d4b7566edec2ea69972b7
# good: [8659da87d21678088ddbed263ad713381db86745] perf/x86/intel/uncore:
Add Clearwater Forest support
git bisect good 8659da87d21678088ddbed263ad713381db86745
# good: [8e8494c83cf73168118587e9567e4f7e50ce4fd8] io_uring/sqpoll: fix
sqpoll error handling races
git bisect good 8e8494c83cf73168118587e9567e4f7e50ce4fd8
# good: [b939f108e86b76119428a6fa4e92491e09ac7867] x86/fred: Clear WFE in
missing-ENDBRANCH #CPs
git bisect good b939f108e86b76119428a6fa4e92491e09ac7867
# bad: [aed157301c659a48f5564cc4568cf0e5c8831af0] PCI/MSI: Handle lack of
irqdomain gracefully
git bisect bad aed157301c659a48f5564cc4568cf0e5c8831af0
# good: [1429ae7b7d4759a1e362456b8911c701bae655b4] virt: tdx-guest: Just
leak decrypted memory on unrecoverable errors
git bisect good 1429ae7b7d4759a1e362456b8911c701bae655b4
# first bad commit: [aed157301c659a48f5564cc4568cf0e5c8831af0] PCI/MSI:
Handle lack of irqdomain gracefully
$
And from there, I can see that commit was meant to fix a PCI MSI issue
seen on RISCV. Which, to be fair, I am sure it did.
I have built a kernel-image-6.19.6 package with commit
aed157301c659a48f5564cc4568cf0e5c8831af0 reverted. It boots
successfully. Boot log attached for that.
Not sure what my next steps are here. This server is likely going
away tomorrow. And the recipient is planning to run an inferior,
proprietary OS on it. I will get console output from the bisection
process saved and some notes prepared in the hopes that the IRQ domain
maintainer can figure find a more architecture neutral solution.
Thanks!
- Aaron
Mon Mar 9 06:26:36 PM UTC 2026
Kernel 6.19.6-powerpc64 with aed157301c659a48f5564cc4568cf0e5c8831af0 reverted
root=/dev/vg00/root ro
=== BEGIN Grub and kernel console output ===
Booting `Debian GNU/Linux'
Loading Linux 6.19.6 ...
Loading initial ramdisk ...
OF stdout device is: /vdevice/vty@30000000
Preparing to boot Linux version 6.19.6 (root@watson) (gcc-14 (Debian 14.3.0-12)
14.3.0, GNU ld (GNU Binutils for Debian) 2.46) #1 SMP PREEMPT Mon Mar 9
17:19:05 UTC 2026
Detected machine type: 0000000000000101
command line: BOOT_IMAGE=/vmlinux-6.19.6 root=/dev/mapper/vg00-root ro
Max number of cores passed to firmware: 1024 (NR_CPUS = 2048)
Calling ibm,client-architecture-support... done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000006a3d000
alloc_top : 0000000010000000
alloc_top_hi : 0000000010000000
rmo_top : 0000000010000000
ram_top : 0000000010000000
instantiating rtas at 0x000000000eeb0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000006a3e000 -> 0x0000000006a3f81f
Device tree struct 0x0000000006a40000 -> 0x0000000006a5f000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000003690000 ...
[ 0.000000] hash-mmu: Page sizes from device-tree:
[ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000,
avpnm=0x00000000, tlbiel=1, penc=0
[ 0.000000] hash-mmu: base_shift=12: shift=16, sllp=0x0000,
avpnm=0x00000000, tlbiel=1, penc=7
[ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110,
avpnm=0x00000000, tlbiel=1, penc=1
[ 0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100,
avpnm=0x00000001, tlbiel=0, penc=0
[ 0.000000] hash-mmu: base_shift=34: shift=34, sllp=0x0120,
avpnm=0x000007ff, tlbiel=0, penc=3
[ 0.000000] hash-mmu: Page orders: linear mapping = 24, virtual = 12, io =
12, vmemmap = 24
[ 0.000000] hash-mmu: Using 1TB segments
[ 0.000000] hash-mmu: Disabling kfence
[ 0.000000] hash-mmu: Initializing hash mmu with SLB
[ 0.000000] Linux version 6.19.6 (root@watson) (gcc-14 (Debian 14.3.0-12)
14.3.0, GNU ld (GNU Binutils for Debian) 2.46) #1 SMP PREEMPT Mon Mar 9
17:19:05 UTC 2026
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in
the DT
[ 0.000000] Found initrd at 0xc000000005a00000:0xc000000006a3c11d
[ 0.000000] OF: : Read of boolean property 'ibm,fw-net-version' with a value.
[ 0.000000] Hardware name: IBM,8204-E8A POWER6 (architected) 0x3e0302
0xf000002 of:IBM,EL350_118 hv:phyp pSeries
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] Partition configured for 8 cpus.
[ 0.000000] CPU maps initialized for 2 threads per core
[ 0.000000] numa: Partition configured for 32 NUMA nodes.
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x7b0000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x80
[ 0.000000] cpu_features = 0x00000121a35c1183
[ 0.000000] possible = 0x003ffbebffffb18f
[ 0.000000] always = 0x0000000000000180
[ 0.000000] cpu_user_features = 0xdc007442 0x00000000
[ 0.000000] mmu_features = 0x7c006001
[ 0.000000] firmware_features = 0x00000080005ffc5f
[ 0.000000] vmalloc start = 0xc0003d0000000000
[ 0.000000] IO start = 0xc0003e0000000000
[ 0.000000] vmemmap start = 0xc0003f0000000000
[ 0.000000] hash-mmu: ppc64_pft_size = 0x1d
[ 0.000000] hash-mmu: htab_hash_mask = 0x3fffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] NODE_DATA(0) allocated [mem 0x3bffb7e00-0x3bffbffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x7aff7fe00-0x7aff87fff]
[ 0.000000] rfi-flush: fallback displacement flush available
[ 0.000000] count-cache-flush: flush disabled.
[ 0.000000] link-stack-flush: flush disabled.
[ 0.000000] PPC64 nvram contains 15360 bytes
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x00000007afffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000003bfffffff]
[ 0.000000] node 1: [mem 0x00000003c0000000-0x00000007afffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000003bfffffff]
[ 0.000000] Initmem setup node 1 [mem 0x00000003c0000000-0x00000007afffffff]
[ 0.000000] Initmem setup node 2 as memoryless
[ 0.000000] Initmem setup node 3 as memoryless
[ 0.000000] Initmem setup node 4 as memoryless
[ 0.000000] Initmem setup node 5 as memoryless
[ 0.000000] Initmem setup node 6 as memoryless
[ 0.000000] Initmem setup node 7 as memoryless
[ 0.000000] Initmem setup node 8 as memoryless
[ 0.000000] Initmem setup node 9 as memoryless
[ 0.000000] Initmem setup node 10 as memoryless
[ 0.000000] Initmem setup node 11 as memoryless
[ 0.000000] Initmem setup node 12 as memoryless
[ 0.000000] Initmem setup node 13 as memoryless
[ 0.000000] Initmem setup node 14 as memoryless
[ 0.000000] Initmem setup node 15 as memoryless
[ 0.000000] Initmem setup node 16 as memoryless
[ 0.000000] Initmem setup node 17 as memoryless
[ 0.000000] Initmem setup node 18 as memoryless
[ 0.000000] Initmem setup node 19 as memoryless
[ 0.000000] Initmem setup node 20 as memoryless
[ 0.000000] Initmem setup node 21 as memoryless
[ 0.000000] Initmem setup node 22 as memoryless
[ 0.000000] Initmem setup node 23 as memoryless
[ 0.000000] Initmem setup node 24 as memoryless
[ 0.000000] Initmem setup node 25 as memoryless
[ 0.000000] Initmem setup node 26 as memoryless
[ 0.000000] Initmem setup node 27 as memoryless
[ 0.000000] Initmem setup node 28 as memoryless
[ 0.000000] Initmem setup node 29 as memoryless
[ 0.000000] Initmem setup node 30 as memoryless
[ 0.000000] Initmem setup node 31 as memoryless
[ 0.000000] percpu: Embedded 39 pages/cpu s121752 r0 d37992 u262144
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinux-6.19.6
root=/dev/mapper/vg00-root ro
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824
bytes
[ 0.000000] Fallback order for Node 0: 0 1
[ 0.000000] Fallback order for Node 1: 1 0
[ 0.000000] Fallback order for Node 2: 0 1
[ 0.000000] Fallback order for Node 3: 1 0
[ 0.000000] Fallback order for Node 4: 0 1
[ 0.000000] Fallback order for Node 5: 1 0
[ 0.000000] Fallback order for Node 6: 0 1
[ 0.000000] Fallback order for Node 7: 1 0
[ 0.000000] Fallback order for Node 8: 0 1
[ 0.000000] Fallback order for Node 9: 1 0
[ 0.000000] Fallback order for Node 10: 0 1
[ 0.000000] Fallback order for Node 11: 1 0
[ 0.000000] Fallback order for Node 12: 0 1
[ 0.000000] Fallback order for Node 13: 1 0
[ 0.000000] Fallback order for Node 14: 0 1
[ 0.000000] Fallback order for Node 15: 1 0
[ 0.000000] Fallback order for Node 16: 0 1
[ 0.000000] Fallback order for Node 17: 1 0
[ 0.000000] Fallback order for Node 18: 0 1
[ 0.000000] Fallback order for Node 19: 1 0
[ 0.000000] Fallback order for Node 20: 0 1
[ 0.000000] Fallback order for Node 21: 1 0
[ 0.000000] Fallback order for Node 22: 0 1
[ 0.000000] Fallback order for Node 23: 1 0
[ 0.000000] Fallback order for Node 24: 0 1
[ 0.000000] Fallback order for Node 25: 1 0
[ 0.000000] Fallback order for Node 26: 0 1
[ 0.000000] Fallback order for Node 27: 1 0
[ 0.000000] Fallback order for Node 28: 0 1
[ 0.000000] Fallback order for Node 29: 1 0
[ 0.000000] Fallback order for Node 30: 0 1
[ 0.000000] Fallback order for Node 31: 1 0
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 8060928
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=32
[ 0.000000] ftrace: allocating 40412 entries in 237 pages
[ 0.000000] ftrace: allocated 237 pages with 6 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=8.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1
rcu_task_cpu_ids=8.
[ 0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1
rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1
rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000001] clocksource: timebase: mask: 0xffffffffffffffff max_cycles:
0x761537d007, max_idle_ns: 440795202126 ns
[ 0.000066] clocksource: timebase mult[1f40000] shift[24] registered
[ 0.000322] Console: colour dummy device 80x25
[ 0.000357] printk: legacy console [hvc0] enabled
[ 0.000357] printk: legacy console [hvc0] enabled
[ 0.000391] printk: legacy bootconsole [udbg0] disabled
[ 0.000391] printk: legacy bootconsole [udbg0] disabled
[ 0.000911] mempolicy: Enabling automatic NUMA balancing. Configure with
numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000924] pid_max: default: 32768 minimum: 301
[ 0.002651] landlock: Up and running.
[ 0.002658] Yama: becoming mindful.
[ 0.002755] AppArmor: AppArmor initialized
[ 0.002778] TOMOYO Linux initialized
[ 0.002949] LSM support for eBPF active
[ 0.011374] Dentry cache hash table entries: 4194304 (order: 13, 33554432
bytes, vmalloc)
[ 0.015644] Inode-cache hash table entries: 2097152 (order: 12, 16777216
bytes, vmalloc)
[ 0.016087] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes,
vmalloc)
[ 0.016244] Mountpoint-cache hash table entries: 65536 (order: 7, 524288
bytes, vmalloc)
[ 0.019986] POWER6 performance monitor hardware support registered
[ 0.020065] rcu: Hierarchical SRCU implementation.
[ 0.020072] rcu: Max phase no-delay instances is 1000.
[ 0.020222] Timer migration: 2 hierarchy levels; 8 children per group; 0
crossnode level
[ 0.021009] smp: Bringing up secondary CPUs ...
[ 0.025110] smp: Brought up 2 nodes, 8 CPUs
[ 0.025123] numa: Node 0 CPUs: 0-3
[ 0.025135] numa: Node 1 CPUs: 4-7
[ 0.095985] node 0 deferred pages initialised in 68ms
[ 0.098689] node 1 deferred pages initialised in 72ms
[ 0.098750] Memory: 31597076K/32243712K available (18624K kernel code, 2924K
rwdata, 5224K rodata, 6604K init, 1234K bss, 589628K reserved, 0K cma-reserved)
[ 0.099780] devtmpfs: initialized
[ 0.109655] PCI host bridge /pci@800000020000200 ranges:
[ 0.109677] IO 0x00003dffe01f0000..0x00003dffe01fffff -> 0x00000000000f0000
[ 0.109688] MEM 0x00003c0000000000..0x00003c007fffffff ->
0x0000000080000000
[ 0.109726] PCI: failed to find MSIs for bridge /pci@800000020000200 (domain
512)
[ 0.109755] PCI host bridge /pci@800000020000201 ranges:
[ 0.109769] IO 0x00003dffe02f0000..0x00003dffe02fffff -> 0x00000000000f0000
[ 0.109780] MEM 0x00003c0080000000..0x00003c00ffffffff ->
0x0000000080000000
[ 0.109814] PCI: failed to find MSIs for bridge /pci@800000020000201 (domain
513)
[ 0.109836] PCI host bridge /pci@800000020000202 ranges:
[ 0.109850] IO 0x00003dffe03f0000..0x00003dffe03fffff -> 0x00000000000f0000
[ 0.109861] MEM 0x00003c0100000000..0x00003c017fffffff ->
0x0000000080000000
[ 0.109905] PCI: failed to find MSIs for bridge /pci@800000020000202 (domain
514)
[ 0.109927] PCI host bridge /pci@800000020000203 ranges:
[ 0.109941] IO 0x00003dffe04f0000..0x00003dffe04fffff -> 0x00000000000f0000
[ 0.109952] MEM 0x00003c0180000000..0x00003c01ffffffff ->
0x0000000080000000
[ 0.109979] PCI: failed to find MSIs for bridge /pci@800000020000203 (domain
515)
[ 0.110001] PCI host bridge /pci@800000020000204 ranges:
[ 0.110015] IO 0x00003dffe11f0000..0x00003dffe11fffff -> 0x00000000000f0000
[ 0.110026] MEM 0x00003c0400000000..0x00003c047fefffff ->
0x0000000080000000
[ 0.110084] PCI host bridge /pci@800000020000205 ranges:
[ 0.110099] IO 0x00003dffe12f0000..0x00003dffe12fffff -> 0x00000000000f0000
[ 0.110109] MEM 0x00003c0480000000..0x00003c04ffefffff ->
0x0000000080000000
[ 0.110162] PCI host bridge /pci@800000020000206 ranges:
[ 0.110177] IO 0x00003dffe13f0000..0x00003dffe13fffff -> 0x00000000000f0000
[ 0.110188] MEM 0x00003c0500000000..0x00003c057fefffff ->
0x0000000080000000
[ 0.110230] PCI host bridge /pci@800000020000207 ranges:
[ 0.110245] IO 0x00003dffe14f0000..0x00003dffe14fffff -> 0x00000000000f0000
[ 0.110256] MEM 0x00003c0580000000..0x00003c05ffefffff ->
0x0000000080000000
[ 0.110700] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.110745] posixtimers hash table entries: 4096 (order: 4, 65536 bytes,
vmalloc)
[ 0.110909] futex hash table entries: 64 (8192 bytes on 32 NUMA nodes, total
256 KiB, linear).
[ 0.211485] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.211672] IBM eBus Device Driver
[ 0.212346] audit: initializing netlink subsys (disabled)
[ 0.212522] audit: type=2000 audit(1773077375.208:1): state=initialized
audit_enabled=0 res=1
[ 0.212904] thermal_sys: Registered thermal governor 'fair_share'
[ 0.212907] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.212915] thermal_sys: Registered thermal governor 'step_wise'
[ 0.212922] thermal_sys: Registered thermal governor 'user_space'
[ 0.212929] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.212984] cpuidle: using governor ladder
[ 0.213034] cpuidle: using governor menu
[ 0.215071] EEH: pSeries platform initialized
[ 0.217808] kprobes: kprobe jump-optimization is enabled. All kprobes are
optimized if possible.
[ 0.222611] HugeTLB: registered 16.0 MiB page size, pre-allocated 0 pages
[ 0.222620] HugeTLB: 0 KiB vmemmap can be freed for a 16.0 MiB page
[ 0.222628] HugeTLB: registered 16.0 GiB page size, pre-allocated 0 pages
[ 0.222635] HugeTLB: 0 KiB vmemmap can be freed for a 16.0 GiB page
[ 0.229904] iommu: Default domain type: Translated
[ 0.229915] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.234768] SCSI subsystem initialized
[ 0.234936] pps_core: LinuxPPS API ver. 1 registered
[ 0.234943] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.234963] PTP clock support registered
[ 0.235601] NetLabel: Initializing
[ 0.235607] NetLabel: domain hash size = 128
[ 0.235613] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.235652] NetLabel: unlabeled traffic allowed by default
[ 0.235662] PCI: Probing PCI hardware
[ 0.235937] PCI host bridge to bus 0200:00
[ 0.235945] pci_bus 0200:00: Unknown NUMA node; performance will be reduced
[ 0.235955] pci_bus 0200:00: root bus resource [io 0x170000-0x17ffff] (bus
address [0xf0000-0xfffff])
[ 0.235966] pci_bus 0200:00: root bus resource [mem
0x3c0000000000-0x3c007fffffff] (bus address [0x80000000-0xffffffff])
[ 0.235977] pci_bus 0200:00: root bus resource [bus 00-ff]
[ 0.237063] pci 0200:00:01.0: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.283787] IOMMU table initialized, virtual merging enabled
[ 0.284178] PCI host bridge to bus 0201:00
[ 0.284186] pci_bus 0201:00: Unknown NUMA node; performance will be reduced
[ 0.284194] pci_bus 0201:00: root bus resource [io 0x2f0000-0x2fffff] (bus
address [0xf0000-0xfffff])
[ 0.284205] pci_bus 0201:00: root bus resource [mem
0x3c0080000000-0x3c00ffffffff] (bus address [0x80000000-0xffffffff])
[ 0.284217] pci_bus 0201:00: root bus resource [bus 00-ff]
[ 0.284795] pci 0201:00:01.0: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.286633] pci 0201:00:01.0: supports D1 D2
[ 0.286641] pci 0201:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.288379] pci 0201:00:01.1: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.290216] pci 0201:00:01.1: supports D1 D2
[ 0.290223] pci 0201:00:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.291953] pci 0201:00:01.2: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.293790] pci 0201:00:01.2: supports D1 D2
[ 0.293798] pci 0201:00:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.337455] PCI host bridge to bus 0202:00
[ 0.337468] pci_bus 0202:00: Unknown NUMA node; performance will be reduced
[ 0.337477] pci_bus 0202:00: root bus resource [io 0x470000-0x47ffff] (bus
address [0xf0000-0xfffff])
[ 0.337488] pci_bus 0202:00: root bus resource [mem
0x3c0100000000-0x3c017fffffff] (bus address [0x80000000-0xffffffff])
[ 0.337500] pci_bus 0202:00: root bus resource [bus 00-ff]
[ 0.338640] pci 0202:00:01.0: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.385603] PCI host bridge to bus 0203:00
[ 0.385616] pci_bus 0203:00: Unknown NUMA node; performance will be reduced
[ 0.385625] pci_bus 0203:00: root bus resource [io 0x5f0000-0x5fffff] (bus
address [0xf0000-0xfffff])
[ 0.385636] pci_bus 0203:00: root bus resource [mem
0x3c0180000000-0x3c01ffffffff] (bus address [0x80000000-0xffffffff])
[ 0.385647] pci_bus 0203:00: root bus resource [bus 00-ff]
[ 0.428209] PCI host bridge to bus 0204:01
[ 0.428222] pci_bus 0204:01: Unknown NUMA node; performance will be reduced
[ 0.428231] pci_bus 0204:01: root bus resource [io 0x770000-0x77ffff] (bus
address [0xf0000-0xfffff])
[ 0.428242] pci_bus 0204:01: root bus resource [mem
0x3c0400000000-0x3c047fefffff] (bus address [0x80000000-0xffefffff])
[ 0.428260] pci_bus 0204:01: root bus resource [bus 01-ff]
[ 0.429572] pci 0204:01:00.0: enabling Extended Tags
[ 0.430294] pci 0204:01:00.0: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.439455] pci 0204:01:00.1: enabling Extended Tags
[ 0.440175] pci 0204:01:00.1: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.490452] PCI host bridge to bus 0205:01
[ 0.490465] pci_bus 0205:01: Unknown NUMA node; performance will be reduced
[ 0.490475] pci_bus 0205:01: root bus resource [io 0x8f0000-0x8fffff] (bus
address [0xf0000-0xfffff])
[ 0.490486] pci_bus 0205:01: root bus resource [mem
0x3c0480000000-0x3c04ffefffff] (bus address [0x80000000-0xffefffff])
[ 0.490497] pci_bus 0205:01: root bus resource [bus 01-ff]
[ 0.491827] pci 0205:01:00.0: enabling Extended Tags
[ 0.492564] pci 0205:01:00.0: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.501935] pci 0205:01:00.1: enabling Extended Tags
[ 0.502673] pci 0205:01:00.1: No hypervisor support for SR-IOV on this
device, IOV BARs disabled.
[ 0.552900] PCI host bridge to bus 0206:01
[ 0.552914] pci_bus 0206:01: Unknown NUMA node; performance will be reduced
[ 0.552923] pci_bus 0206:01: root bus resource [io 0xa70000-0xa7ffff] (bus
address [0xf0000-0xfffff])
[ 0.552933] pci_bus 0206:01: root bus resource [mem
0x3c0500000000-0x3c057fefffff] (bus address [0x80000000-0xffefffff])
[ 0.552945] pci_bus 0206:01: root bus resource [bus 01-ff]
[ 0.595315] PCI host bridge to bus 0207:01
[ 0.595328] pci_bus 0207:01: Unknown NUMA node; performance will be reduced
[ 0.595337] pci_bus 0207:01: root bus resource [io 0xbf0000-0xbfffff] (bus
address [0xf0000-0xfffff])
[ 0.595348] pci_bus 0207:01: root bus resource [mem
0x3c0580000000-0x3c05ffefffff] (bus address [0x80000000-0xffefffff])
[ 0.595360] pci_bus 0207:01: root bus resource [bus 01-ff]
[ 0.639939] pci_bus 0200:00: resource 4 [io 0x170000-0x17ffff]
[ 0.639952] pci_bus 0200:00: resource 5 [mem 0x3c0000000000-0x3c007fffffff]
[ 0.639963] pci_bus 0201:00: resource 4 [io 0x2f0000-0x2fffff]
[ 0.639972] pci_bus 0201:00: resource 5 [mem 0x3c0080000000-0x3c00ffffffff]
[ 0.639982] pci_bus 0202:00: resource 4 [io 0x470000-0x47ffff]
[ 0.639991] pci_bus 0202:00: resource 5 [mem 0x3c0100000000-0x3c017fffffff]
[ 0.640000] pci_bus 0203:00: resource 4 [io 0x5f0000-0x5fffff]
[ 0.640009] pci_bus 0203:00: resource 5 [mem 0x3c0180000000-0x3c01ffffffff]
[ 0.640020] pci_bus 0204:01: resource 4 [io 0x770000-0x77ffff]
[ 0.640028] pci_bus 0204:01: resource 5 [mem 0x3c0400000000-0x3c047fefffff]
[ 0.640039] pci_bus 0205:01: resource 4 [io 0x8f0000-0x8fffff]
[ 0.640048] pci_bus 0205:01: resource 5 [mem 0x3c0480000000-0x3c04ffefffff]
[ 0.640057] pci_bus 0206:01: resource 4 [io 0xa70000-0xa7ffff]
[ 0.640066] pci_bus 0206:01: resource 5 [mem 0x3c0500000000-0x3c057fefffff]
[ 0.640076] pci_bus 0207:01: resource 4 [io 0xbf0000-0xbfffff]
[ 0.640085] pci_bus 0207:01: resource 5 [mem 0x3c0580000000-0x3c05ffefffff]
[ 0.640117] pci 0200:00:01.0: Adding to iommu group 0
[ 0.645260] pci 0201:00:01.0: Adding to iommu group 1
[ 0.649495] pci 0201:00:01.1: Adding to iommu group 1
[ 0.653721] pci 0201:00:01.2: Adding to iommu group 1
[ 0.657966] pci 0202:00:01.0: Adding to iommu group 2
[ 0.663374] pci 0204:01:00.0: Adding to iommu group 4
[ 0.670587] pci 0204:01:00.1: Adding to iommu group 4
[ 0.677839] pci 0205:01:00.0: Adding to iommu group 5
[ 0.685199] pci 0205:01:00.1: Adding to iommu group 5
[ 0.692554] EEH: Capable adapter found: recovery enabled.
[ 0.692725] vgaarb: loaded
[ 0.692929] clocksource: Switched to clocksource timebase
[ 0.696050] VFS: Disk quotas dquot_6.6.0
[ 0.696178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.697143] AppArmor: AppArmor Filesystem Enabled
[ 0.706211] NET: Registered PF_INET protocol family
[ 0.706832] IP idents hash table entries: 262144 (order: 9, 2097152 bytes,
vmalloc)
[ 0.712548] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6,
262144 bytes, vmalloc)
[ 0.712890] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
vmalloc)
[ 0.713529] TCP established hash table entries: 262144 (order: 9, 2097152
bytes, vmalloc)
[ 0.716219] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes,
vmalloc)
[ 0.718228] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.718727] MPTCP token hash table entries: 32768 (order: 8, 786432 bytes,
vmalloc)
[ 0.719892] UDP hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc)
[ 0.721240] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes,
vmalloc)
[ 0.722535] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.722555] NET: Registered PF_XDP protocol family
[ 0.724368] pci 0201:00:01.2: enabling device (0140 -> 0142)
[ 0.725629] PCI: CLS 128 bytes, default 128
[ 0.725845] Unpacking initramfs...
[ 0.734799] Initialise system trusted keyrings
[ 0.734879] Key type blacklist registered
[ 0.735152] workingset: timestamp_bits=38 max_order=23 bucket_order=0
[ 0.736532] fuse: init (API version 7.45)
[ 0.737212] integrity: Platform Keyring initialized
[ 0.791750] Key type asymmetric registered
[ 0.791766] Asymmetric key parser 'x509' registered
[ 0.792873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 0.793047] io scheduler mq-deadline registered
[ 0.809206] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.810479] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.811780] Non-volatile memory driver v1.3
[ 0.811787] Linux agpgart interface v0.103
[ 0.812611] mousedev: PS/2 mouse device common for all mice
[ 0.812790] rtc-generic rtc-generic: registered as rtc0
[ 0.812840] rtc-generic rtc-generic: setting system clock to
2026-03-09T17:29:36 UTC (1773077376)
[ 0.813813] NET: Registered PF_INET6 protocol family
[ 0.814581] Segment Routing with IPv6
[ 0.814588] RPL Segment Routing with IPv6
[ 0.814614] In-situ OAM (IOAM) with IPv6
[ 0.814659] mip6: Mobile IPv6
[ 0.814669] NET: Registered PF_PACKET protocol family
[ 0.814800] mpls_gso: MPLS GSO support
[ 0.822345] registered taskstats version 1
[ 0.822598] Loading compiled-in X.509 certificates
[ 0.875488] Loaded X.509 cert 'Build time autogenerated kernel key:
8d31d438fb86af48be6d80a8121a670675059079'
[ 0.883786] Demotion targets for Node 0: null
[ 0.883794] Demotion targets for Node 1: null
[ 0.884623] Key type .fscrypt registered
[ 0.884630] Key type fscrypt-provisioning registered
[ 1.183169] Freeing initrd memory: 16624K
[ 1.256401] Key type encrypted registered
[ 1.256417] AppArmor: AppArmor sha256 policy hashing enabled
[ 1.256430] ima: No TPM chip found, activating TPM-bypass!
[ 1.256440] ima: Allocated hash algorithm: sha256
[ 1.256876] ima: No architecture policies found
[ 1.256966] evm: Initialising EVM extended attributes:
[ 1.256973] evm: security.selinux
[ 1.256979] evm: security.SMACK64 (disabled)
[ 1.256985] evm: security.SMACK64EXEC (disabled)
[ 1.256991] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.256997] evm: security.SMACK64MMAP (disabled)
[ 1.257003] evm: security.apparmor
[ 1.257009] evm: security.ima
[ 1.257014] evm: security.capability
[ 1.257020] evm: HMAC attrs: 0x1
[ 1.277123] SED: plpks not available
[ 1.286584] Freeing unused kernel image (initmem) memory: 6604K
[ 1.286597] This architecture does not have kernel memory protection.
[ 1.286610] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 260~rc2-1
[ 2.072243] ehea: module verification failed: signature and/or required key
missing - tainting kernel
[ 2.074106] ehea: IBM eHEA ethernet device driver (Release EHEA_0107)
[ 2.085284] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14,
2017)
[ 2.085351] ipr 0200:00:01.0: Found IOA with IRQ: 18
[ 2.090961] ipr 0200:00:01.0: Starting IOA initialization sequence.
[ 2.090976] scsi host0: IBM 0 Storage Adapter
[ 2.091589] ipr 0202:00:01.0: Found IOA with IRQ: 22
[ 2.091604] ipr 0200:00:01.0: Adapter firmware version: 02200070
[ 2.097734] ipr 0200:00:01.0: IOA initialized.
[ 2.098392] scsi 0:255:255:255: No Device IBM 572C001SISIOA
0150 PQ: 0 ANSI: 0
[ 2.099449] ipr 0202:00:01.0: Starting IOA initialization sequence.
[ 2.099467] scsi host1: IBM 0 Storage Adapter
[ 2.100060] ipr 0202:00:01.0: Adapter firmware version: 07130025
[ 2.100947] ipr 0202:00:01.0: IOA initialized.
[ 2.103128] scsi 1:255:255:255: No Device IBM 571A001
0150 PQ: 0 ANSI: 0
[ 2.133160] scsi 0:8:0:0: Enclosure IBM VSBPM2E4 3GSAS 05
PQ: 0 ANSI: 2
[ 2.134621] scsi 0:4:2:0: Direct-Access IBM HUS153014VLS300 A424
PQ: 0 ANSI: 5
[ 2.141284] scsi 0:4:3:0: Direct-Access IBM HUS153014VLS300 A424
PQ: 0 ANSI: 5
[ 2.184960] scsi 0:4:4:0: Direct-Access Pliant LB406SC MS07
PQ: 0 ANSI: 6
[ 2.784609] ibmebus port0 eth0: Jumbo frames are disabled
[ 2.784624] ibmebus port0 eth0: logical port id #1
[ 2.785246] ibmebus port1 eth1: Jumbo frames are disabled
[ 2.785254] ibmebus port1 eth1: logical port id #2
[ 2.785766] ibmebus port2 eth2: Jumbo frames are disabled
[ 2.785774] ibmebus port2 eth2: logical port id #17
[ 2.786322] ibmebus port3 eth3: Jumbo frames are disabled
[ 2.786330] ibmebus port3 eth3: logical port id #18
[ 2.883571] scsi 0:4:10:0: Enclosure IBM PSBPD6E4 3GSAS 0008
PQ: 0 ANSI: 4
[ 2.965123] scsi 0:6:10:0: Enclosure IBM PSBPD6E4 3GSAS 0008
PQ: 0 ANSI: 4
[ 3.033355] scsi 0:3:0:0: SATA devices are no longer supported by this
driver. Skipping device.
[ 3.083342] sd 0:4:3:0: [sdb] 286748000 512-byte logical blocks: (147 GB/137
GiB)
[ 3.085717] sd 0:4:3:0: [sdb] Write Protect is off
[ 3.088280] sd 0:4:3:0: [sdb] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 3.097995] sd 0:4:2:0: Power-on or device reset occurred
[ 3.098963] sd 0:4:2:0: [sda] 286748000 512-byte logical blocks: (147 GB/137
GiB)
[ 3.100324] sd 0:4:2:0: [sda] Write Protect is off
[ 3.101876] sd 0:4:2:0: [sda] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 3.122701] sd 0:4:4:0: Power-on or device reset occurred
[ 3.163709] sda: sda1 sda2 sda3
[ 3.164194] sd 0:4:2:0: [sda] Attached SCSI disk
[ 3.169237] sdb: sdb1 sdb2 sdb3
[ 3.169662] sd 0:4:3:0: [sdb] Attached SCSI disk
[ 3.199750] sd 0:4:4:0: [sdc] 781422768 512-byte logical blocks: (400 GB/373
GiB)
[ 3.229277] sd 0:4:4:0: [sdc] Write Protect is off
[ 3.312758] sd 0:4:4:0: [sdc] Write cache: disabled, read cache: disabled,
supports DPO and FUA
[ 3.521001] sd 0:4:4:0: [sdc] Disabling DIF Type 2 protection
[ 3.521014] sd 0:4:4:0: [sdc] Enabling DIF Type 0 protection
[ 4.013694] sd 0:4:4:0: [sdc] Attached SCSI disk
[ 4.371179] md127: echo current LBS to md/logical_block_size to prevent data
loss issues from LBS changes.
[ 4.371179] Note: After setting, array will not be assembled in old kernels
(<= 6.18)
[ 4.371201] md/raid1:md127: active with 2 out of 2 mirrors
[ 4.380984] md127: detected capacity change from 0 to 2093056
[ 4.381078] md_update_sb: can't update sb for read-only array md127
Begin: Loading essential drivers ... [ 4.904837] xor: measuring software
checksum speed
[ 4.905165] 8regs : 10647 MB/sec
[ 4.905544] 8regs_prefetch : 8841 MB/sec
[ 4.905856] 32regs : 10732 MB/sec
[ 4.906242] 32regs_prefetch : 8660 MB/sec
[ 4.906670] altivec : 7786 MB/sec
[ 4.906678] xor: using function: 32regs (10732 MB/sec)
[ 4.988936] raid6: altivecx8 gen() 2847 MB/s
[ 5.056937] raid6: altivecx4 gen() 3090 MB/s
[ 5.124964] raid6: altivecx2 gen() 2848 MB/s
[ 5.192953] raid6: altivecx1 gen() 2148 MB/s
[ 5.260939] raid6: int64x8 gen() 2699 MB/s
[ 5.328937] raid6: int64x4 gen() 3951 MB/s
[ 5.396927] raid6: int64x2 gen() 3392 MB/s
[ 5.464927] raid6: int64x1 gen() 1984 MB/s
[ 5.464937] raid6: using algorithm int64x4 gen() 3951 MB/s
[ 5.532925] raid6: .... xor() 1593 MB/s, rmw enabled
[ 5.532935] raid6: using intx1 recovery algorithm
done.
Begin: Running /scripts/init-premount ... Begin: Waiting up to 180 secs for any
network device to become available ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
IP-Config: eth2 hardware address 00:21:5e:17:5d:90 mtu 1500 DHCP RARP
[ 5.688886] ibmebus port2 eth2: Logical port up: 0Mbps Half Duplex
[ 5.688909] ibmebus port2 eth2: Physical port down
[ 5.688934] ibmebus port2 eth2: External switch port is backup port
[ 5.714122] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled.
Duplicate IMA measurements will not be recorded in the IMA log.
[ 5.714270] device-mapper: uevent: version 1.0.3
[ 5.714557] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised:
[email protected]
IP-Config: eth0 hardware address 00:21:5e:17:5d:80 mtu 1500 DHCP RARP
[ 5.741945] ibmebus port0 eth0: Logical port up: 1000Mbps Full Duplex
[ 5.741965] ibmebus port0 eth0: Physical port up
[ 5.741972] ibmebus port0 eth0: External switch port is backup port
IP-Config: eth3 hardware address 00:21:5e:17:5d:91 mtu 1500 DHCP RARP
[ 5.777151] ibmebus port3 eth3: Logical port up: 0Mbps Half Duplex
[ 5.777177] ibmebus port3 eth3: Physical port down
[ 5.777185] ibmebus port3 eth3: External switch port is backup port
Please unlock disk sda3_plain: IP-Config: eth1 hardware address
00:21:5e:17:5d:81 mtu 1500 DHCP RARP
IP-Config: eth0 complete (dhcp from 172.17.0.3):
address: 172.17.0.42 broadcast: 172.17.0.255 netmask: 255.255.255.0
gateway: 172.17.0.1 dns0 : 172.17.0.1 dns1 : 172.17.0.2
host : watson
domain : internal.fnord.greeley.co.us
rootserver: 172.17.0.18 rootpath:
filename : debian/trixie/ppc64/boot/grub/powerpc.elf
Begin: Starting dropbear ...
cryptsetup: sda3_plain: set up successfully
Please unlock disk sdb3_plain:
[ 99.448388] md126: echo current LBS to md/logical_block_size to prevent data
loss issues from LBS changes.
[ 99.448388] Note: After setting, array will not be assembled in old kernels
(<= 6.18)
[ 99.448422] md/raid1:md126: active with 2 out of 2 mirrors
[ 99.459872] md126: detected capacity change from 0 to 284335360
[ 99.459933] md_update_sb: can't update sb for read-only array md126
cryptsetup: sdb3_plain: set up successfully
done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.41.3
[/sbin/fsck.ext4 (1) -- /dev/mapper/vg00-root] fsck.ext4 -a -C0
/dev/mapper/vg00-root
/dev/mapper/vg00-root: clean, 88268/262144 files, 711956/1048576 blocks
done.
[ 100.780478] EXT4-fs (dm-2): mounted filesystem
26efc594-bfba-47ca-a68d-eebe44ddef0b ro with ordered data mode. Quota mode:
none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Begin: Stopping dropbear ... done.
Begin: Bringing down eth0 ... [ 101.012892] ibmebus port0 eth0: Logical port
down
[ 101.012916] ibmebus port0 eth0: Physical port up
[ 101.012942] ibmebus port0 eth0: External switch port is backup port
[ 101.016337] ibmebus port0 eth0: Physical port up
[ 101.016348] ibmebus port0 eth0: External switch port is backup port
[ 101.018591] ibmebus port0 eth0: Physical port up
[ 101.018601] ibmebus port0 eth0: External switch port is backup port
[ 101.020801] ibmebus port0 eth0: Physical port up
[ 101.020810] ibmebus port0 eth0: External switch port is backup port
done.
Begin: Bringing down eth1 ... [ 101.037958] ibmebus port1 eth1: Logical port
down
[ 101.037974] ibmebus port1 eth1: Physical port down
[ 101.037981] ibmebus port1 eth1: External switch port is backup port
[ 101.040353] ibmebus port1 eth1: Physical port down
[ 101.040362] ibmebus port1 eth1: External switch port is backup port
[ 101.042568] ibmebus port1 eth1: Physical port down
[ 101.042578] ibmebus port1 eth1: External switch port is backup port
[ 101.044796] ibmebus port1 eth1: Physical port down
[ 101.044805] ibmebus port1 eth1: External switch port is backup port
done.
Begin: Bringing down eth2 ... [ 101.061871] ibmebus port2 eth2: Logical port
down
[ 101.061886] ibmebus port2 eth2: Physical port down
[ 101.061894] ibmebus port2 eth2: External switch port is backup port
[ 101.064142] ibmebus port2 eth2: Physical port down
[ 101.064150] ibmebus port2 eth2: External switch port is backup port
[ 101.066371] ibmebus port2 eth2: Physical port down
[ 101.066380] ibmebus port2 eth2: External switch port is backup port
[ 101.068586] ibmebus port2 eth2: Physical port down
[ 101.068595] ibmebus port2 eth2: External switch port is backup port
done.
Begin: Bringing down eth3 ... [ 101.085485] ibmebus port3 eth3: Logical port
down
[ 101.085501] ibmebus port3 eth3: Physical port down
[ 101.085508] ibmebus port3 eth3: External switch port is backup port
[ 101.087756] ibmebus port3 eth3: Physical port down
[ 101.087765] ibmebus port3 eth3: External switch port is backup port
[ 101.089980] ibmebus port3 eth3: Physical port down
[ 101.089989] ibmebus port3 eth3: External switch port is backup port
[ 101.092212] ibmebus port3 eth3: Physical port down
[ 101.092221] ibmebus port3 eth3: External switch port is backup port
done.
Begin: Bringing down lo ... done.
done.
[ 101.300159] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 102.204215] systemd[1]: Inserted module 'autofs4'
[ 102.358252] systemd[1]: systemd 260~rc2-1 running in system mode (+PAM
+AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL
+ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP
+LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2
+BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON -UTMP +LIBARCHIVE)
[ 102.358288] systemd[1]: Detected virtualization powervm.
[ 102.358322] systemd[1]: Detected architecture ppc64.
Welcome to Debian GNU/Linux forky/sid!
[ 102.531392] NET: Registered PF_VSOCK protocol family
[ 103.366294] systemd[1]: Queued start job for default target graphical.target.
[ 103.410063] systemd[1]: Created slice system-getty.slice - Slice
/system/getty.
[ OK ] Created slice system-getty.slice - Slice /system/getty.
[ 103.412177] systemd[1]: Created slice system-modprobe.slice - Slice
/system/modprobe.
[ OK ] Created slice system-modprobe.slice - Slice /system/modprobe.
[ 103.414182] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice
/system/serial-getty.
[ OK ] Created slice system-serial\x2dgetty.slice - Slice
/system/serial-getty.
[ 103.416100] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice
/system/systemd-fsck.
[ OK ] Created slice system-systemd\x2dfsck.slice - Slice
/system/systemd-fsck.
[ 103.417668] systemd[1]: Created slice user.slice - User and Session Slice.
[ OK ] Created slice user.slice - User and Session Slice.
[ 103.418170] systemd[1]: Started systemd-ask-password-console.path - Dispatch
Password Requests to Console Directory Watch.
[ OK ] Started systemd-ask-password-console.path - Dispatch Password Requests
to Console Directory Watch.
[ 103.418624] systemd[1]: Started systemd-ask-password-wall.path - Forward
Password Requests to Wall Directory Watch.
[ OK ] Started systemd-ask-password-wall.path - Forward Password Requests to
Wall Directory Watch.
[ 103.419470] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount -
Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary
Executable File Formats File System Automount Point.
[ 103.419787] systemd[1]: Expecting device
dev-disk-by\x2duuid-b9cc43d7\x2de381\x2d4c11\x2d9a21\x2d6beb7d32b6a7.device -
/dev/disk/by-uuid/b9cc43d7-e381-4c11-9a21-6beb7d32b6a7...
Expecting device
dev-disk-by\x2duuid-b9cc43d7\x2de381\x2d4c11\x2d9a21\x2d6beb7d32b6a7.device -
/dev/disk/by-uuid/b9cc43d7-e381-4c11-9a21-6beb7d32b6a7...
[ 103.420066] systemd[1]: Expecting device
dev-disk-by\x2duuid-d0966326\x2dff73\x2d44ea\x2d9123\x2df34d3b8587c7.device -
/dev/disk/by-uuid/d0966326-ff73-44ea-9123-f34d3b8587c7...
Expecting device
dev-disk-by\x2duuid-d0966326\x2dff73\x2d44ea\x2d9123\x2df34d3b8587c7.device -
/dev/disk/by-uuid/d0966326-ff73-44ea-9123-f34d3b8587c7...
[ 103.420340] systemd[1]: Expecting device dev-hvc0.device - /dev/hvc0...
Expecting device dev-hvc0.device - /dev/hvc0...
[ 103.420596] systemd[1]: Expecting device dev-vg00-home.device -
/dev/vg00/home...
Expecting device dev-vg00-home.device - /dev/vg00/home...
[ 103.420857] systemd[1]: Expecting device dev-vg00-opt.device -
/dev/vg00/opt...
Expecting device dev-vg00-opt.device - /dev/vg00/opt...
[ 103.421138] systemd[1]: Expecting device dev-vg00-swap.device -
/dev/vg00/swap...
Expecting device dev-vg00-swap.device - /dev/vg00/swap...
[ 103.421388] systemd[1]: Expecting device dev-vg00-tmp.device -
/dev/vg00/tmp...
Expecting device dev-vg00-tmp.device - /dev/vg00/tmp...
[ 103.421642] systemd[1]: Expecting device dev-vg00-var.device -
/dev/vg00/var...
Expecting device dev-vg00-var.device - /dev/vg00/var...
[ 103.421929] systemd[1]: Reached target imports.target - Image Downloads.
[ OK ] Reached target imports.target - Image Downloads.
[ 103.422232] systemd[1]: Reached target paths.target - Path Units.
[ OK ] Reached target paths.target - Path Units.
[ 103.422528] systemd[1]: Reached target remote-fs.target - Remote File
Systems.
[ OK ] Reached target remote-fs.target - Remote File Systems.
[ 103.422812] systemd[1]: Reached target slices.target - Slice Units.
[ OK ] Reached target slices.target - Slice Units.
[ 103.423328] systemd[1]: Listening on dm-event.socket - Device-mapper event
daemon FIFOs.
[ OK ] Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 103.423758] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon
socket.
[ OK ] Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 103.428694] systemd[1]: Listening on systemd-ask-password.socket - Query the
User Interactively for a Password.
[ OK ] Listening on systemd-ask-password.socket - Query the User
Interactively for a Password.
[ 103.432222] systemd[1]: Listening on systemd-creds.socket - Credential
Encryption/Decryption.
[ OK ] Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 103.437174] systemd[1]: Listening on systemd-factory-reset.socket - Factory
Reset Management.
[ OK ] Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 103.437798] systemd[1]: Listening on systemd-journald-dev-log.socket -
Journal Socket (/dev/log).
[ OK ] Listening on systemd-journald-dev-log.socket - Journal Socket
(/dev/log).
[ 103.438399] systemd[1]: Listening on systemd-journald.socket - Journal
Sockets.
[ OK ] Listening on systemd-journald.socket - Journal Sockets.
[ 103.443762] systemd[1]: Listening on systemd-mute-console.socket - Console
Output Muting Service Socket.
[ OK ] Listening on systemd-mute-console.socket - Console Output Muting
Service Socket.
[ 103.444289] systemd[1]: Listening on systemd-udevd-control.socket - udev
Control Socket.
[ OK ] Listening on systemd-udevd-control.socket - udev Control Socket.
[ 103.444716] systemd[1]: Listening on systemd-udevd-kernel.socket - udev
Kernel Socket.
[ OK ] Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 103.445220] systemd[1]: Listening on systemd-udevd-varlink.socket - udev
Varlink Socket.
[ OK ] Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 103.450557] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File
System...
Mounting dev-hugepages.mount - Huge Pages File System...
[ 103.453650] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File
System...
Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 103.458094] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File
System...
Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 103.462789] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace
File System...
Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 103.467609] systemd[1]: Starting blk-availability.service - Availability of
block devices...
Starting blk-availability.service - Availability of block devices...
[ 103.472905] systemd[1]: Starting kmod-static-nodes.service - Create List of
Static Device Nodes...
Starting kmod-static-nodes.service - Create List of Static Device
Nodes...
[ 103.477221] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2
mirrors, snapshots etc. using dmeventd or progress polling...
Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots
etc. using dmeventd or progress polling...
[ 103.497698] systemd[1]: Starting [email protected] - Load Kernel
Module configfs...
Starting [email protected] - Load Kernel Module configfs...
[ 103.502486] systemd[1]: Starting [email protected] - Load Kernel Module
drm...
Starting [email protected] - Load Kernel Module drm...
[ 103.507270] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel
Module efi_pstore...
Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 103.508606] systemd[1]: [email protected] - Load Kernel Module fuse
skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
[ 103.514571] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE
Control File System...
Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 103.515173] systemd[1]: systemd-fsck-root.service - File System Check on
Root Device skipped, unmet condition check
ConditionPathExists=!/run/initramfs/fsck-root
[ 103.515455] systemd[1]: systemd-hibernate-clear.service - Clear Stale
Hibernate Storage Info skipped, unmet condition check
ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
[ 103.522738] systemd[1]: Starting systemd-journald.service - Journal
Service...
Starting systemd-journald.service - Journal Service...
[ 103.534864] systemd[1]: Starting systemd-modules-load.service - Load Kernel
Modules...
Starting systemd-modules-load.service - Load Kernel Modules...
[ 103.540729] systemd[1]: Starting systemd-remount-fs.service - Remount Root
and Kernel File Systems...
Starting systemd-remount-fs.service - Remount Root and Kernel File
Systems...
[ 103.546161] systemd[1]: Starting systemd-udev-load-credentials.service -
Load udev Rules from Credentials...
Starting systemd-udev-load-credentials.service - Load udev Rules from
Credentials...
[ 103.557597] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All
udev Devices...
Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 103.590093] systemd[1]: Finished blk-availability.service - Availability of
block devices.
[ OK ] Finished blk-availability.service - Availability of block devices.
[ 103.694093] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
[ 103.694788] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File
System.
[ OK ] Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 103.695389] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File
System.
[ OK ] Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 103.695995] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File
System.
[ OK ] Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 103.697263] systemd[1]: Finished kmod-static-nodes.service - Create List of
Static Device Nodes.
[ OK ] Finished kmod-static-nodes.service - Create List of Static Device
Nodes.
[ 103.698520] systemd[1]: [email protected]: Deactivated successfully.
[ 103.699270] systemd[1]: Finished [email protected] - Load Kernel
Module configfs.
[ OK ] Finished [email protected] - Load Kernel Module configfs.
[ 103.700648] systemd[1]: modprobe@efi_pstore.service: Deactivated
successfully.
[ 103.701403] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel
Module efi_pstore.
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 103.702222] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control
File System.
[ OK ] Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 103.703408] systemd[1]: Finished systemd-modules-load.service - Load Kernel
Modules.
[ OK ] Finished systemd-modules-load.service - Load Kernel Modules.
[ 103.704862] systemd[1]: Finished systemd-udev-load-credentials.service -
Load udev Rules from Credentials.
[ OK ] Finished systemd-udev-load-credentials.service - Load udev Rules from
Credentials.
[ 103.713861] systemd[1]: Mounting sys-kernel-config.mount - Kernel
Configuration File System...
Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 103.725293] systemd[1]: Starting systemd-sysctl.service - Apply Kernel
Variables...
Starting systemd-sysctl.service - Apply Kernel Variables...
[ 103.729518] EXT4-fs (dm-2): re-mounted 26efc594-bfba-47ca-a68d-eebe44ddef0b
r/w.
[ 103.733815] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service -
Create Static Device Nodes in /dev gracefully...
Starting systemd-tmpfiles-setup-dev-early.service - Create Static
Device Nodes in /dev gracefully...
[ 103.751034] systemd-journald[694]: Collecting audit messages is disabled.
[ 103.765400] systemd[1]: Finished systemd-remount-fs.service - Remount Root
and Kernel File Systems.
[ OK ] Finished systemd-remount-fs.service - Remount Root and Kernel File
Systems.
[ 103.767406] systemd[1]: [email protected]: Deactivated successfully.
[ 103.768441] systemd[1]: Finished [email protected] - Load Kernel Module
drm.
[ OK ] Finished [email protected] - Load Kernel Module drm.
[ 103.783926] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware
Database skipped, unmet condition check ConditionNeedsUpdate=/etc
[ 103.786497] systemd[1]: Mounted sys-kernel-config.mount - Kernel
Configuration File System.
[ OK ] Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 103.849538] systemd[1]: Finished systemd-sysctl.service - Apply Kernel
Variables.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
[ 103.921267] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service -
Create Static Device Nodes in /dev gracefully.
[ OK ] Finished systemd-tmpfiles-setup-dev-early.service - Create Static
Device Nodes in /dev gracefully.
[ 103.921920] systemd[1]: systemd-sysusers.service - Create System Users
skipped, no trigger condition checks were met.
[ 103.933693] systemd[1]: Starting systemd-journalctl.socket - Journal Log
Access Socket...
Starting systemd-journalctl.socket - Journal Log Access Socket...
[ 103.952408] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create
Static Device Nodes in /dev...
Starting systemd-tmpfiles-setup-dev.service - Create Static Device
Nodes in /dev...
[ 103.956037] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2
mirrors, snapshots etc. using dmeventd or progress polling.
[ OK ] Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots
etc. using dmeventd or progress polling.
[ 103.957161] systemd[1]: Listening on systemd-journalctl.socket - Journal Log
Access Socket.
[ OK ] Listening on systemd-journalctl.socket - Journal Log Access Socket.
[ 103.971353] systemd[1]: Started systemd-journald.service - Journal Service.
[ OK ] Started systemd-journald.service - Journal Service.
[ OK ] Finished systemd-tmpfiles-setup-dev.service - Create Static Device
Nodes in /dev.
[ OK ] Reached target local-fs-pre.target - Preparation for Local File
Systems.
Starting systemd-udevd.service - Rule-based Manager for Device Events
and Files...
[ OK ] Finished systemd-udev-trigger.service - Coldplug All udev Devices.
Starting ifupdown-pre.service - Helper to synchronize boot up for
ifupdown...
[ OK ] Started systemd-udevd.service - Rule-based Manager for Device Events
and Files.
[ OK ] Finished ifupdown-pre.service - Helper to synchronize boot up for
ifupdown.
[ OK ] Found device dev-hvc0.device - /dev/hvc0.
Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 105.006912] scsi 0:255:255:255: Attached scsi generic sg0 type 31
[ 105.007066] scsi 0:8:0:0: Attached scsi generic sg1 type 13
[ 105.007219] sd 0:4:2:0: Attached scsi generic sg2 type 0
[ 105.007354] sd 0:4:3:0: Attached scsi generic sg3 type 0
[ 105.007481] sd 0:4:4:0: Attached scsi generic sg4 type 0
[ 105.009187] scsi 0:4:10:0: Attached scsi generic sg5 type 13
[ 105.009505] scsi 0:6:10:0: Attached scsi generic sg6 type 13
[ 105.010803] scsi 1:255:255:255: Attached scsi generic sg7 type 31
[ 105.048995] Key type psk registered
[ 105.065409] usbcore: registered new interface driver usbfs
[ 105.065506] usbcore: registered new interface driver hub
[ 105.065595] usbcore: registered new device driver usb
[ 105.114097] ehci-pci 0201:00:01.2: EHCI Host Controller
[ 105.114137] ehci-pci 0201:00:01.2: new USB bus registered, assigned bus
number 1
[ 105.114810] ehci-pci 0201:00:01.2: irq 21, io mem 0x3c00ffffd000
[ 105.124950] ehci-pci 0201:00:01.2: USB 2.0 started, EHCI 1.00
[ 105.125207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.19
[ 105.125221] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 105.125233] usb usb1: Product: EHCI Host Controller
[ 105.125241] usb usb1: Manufacturer: Linux 6.19.6 ehci_hcd
[ 105.125250] usb usb1: SerialNumber: 0201:00:01.2
[ 105.135026] hub 1-0:1.0: USB hub found
[ 105.135077] hub 1-0:1.0: 5 ports detected
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 105.185370] ohci-pci 0201:00:01.0: OHCI PCI host controller
[ 105.185689] ohci-pci 0201:00:01.0: new USB bus registered, assigned bus
number 2
[ 105.185844] ohci-pci 0201:00:01.0: irq 19, io mem 0x3c00ffffe000
[ 105.275283] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.19
[ 105.275303] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 105.275312] usb usb2: Product: OHCI PCI host controller
[ 105.275319] usb usb2: Manufacturer: Linux 6.19.6 ohci_hcd
[ 105.275327] usb usb2: SerialNumber: 0201:00:01.0
[ 105.275661] hub 2-0:1.0: USB hub found
[ 105.275705] hub 2-0:1.0: 3 ports detected
[ 105.277436] ohci-pci 0201:00:01.1: OHCI PCI host controller
[ 105.277455] ohci-pci 0201:00:01.1: new USB bus registered, assigned bus
number 3
[ 105.277629] ohci-pci 0201:00:01.1: irq 20, io mem 0x3c00fffff000
[ 105.353315] ses 0:8:0:0: Attached Enclosure device
[ 105.353373] ses 0:4:10:0: Attached Enclosure device
[ 105.353407] ses 0:6:10:0: Attached Enclosure device
[ 105.369092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.19
[ 105.369113] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 105.369126] usb usb3: Product: OHCI PCI host controller
[ 105.369136] usb usb3: Manufacturer: Linux 6.19.6 ohci_hcd
[ 105.369146] usb usb3: SerialNumber: 0201:00:01.1
[ 105.372762] hub 3-0:1.0: USB hub found
[ 105.372801] hub 3-0:1.0: 2 ports detected
[ OK ] Found device dev-vg00-tmp.device - /dev/vg00/tmp.
[ 105.533230] Emulex LightPulse Fibre Channel SCSI driver 14.4.0.12
[ 105.533247] Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term
"Broadcom" refers to Broadcom Inc. and/or its subsidiaries.
[ 105.533853] lpfc 0204:01:00.0: enabling device (0140 -> 0142)
[ 105.538060] lpfc 0204:01:00.0: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 105.538104] lpfc 0204:01:00.0: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 105.540041] scsi host2: Emulex LPe11000 PCIe Obsolete, Unsupported Fibre
Channel Adapter on PCI bus 01 device 00 irq 23 BSG
[ OK ] Found device dev-vg00-swap.device - /dev/vg00/swap.
[ OK ] Found device dev-vg00-var.device - /dev/vg00/var.
[ OK ] Found device
dev-disk-by\x2duuid-d0966326\x2dff73\x2d44ea\x2d9123\x2df34d3b8587c7.device -
LB406SC.
[ OK ] Found device dev-vg00-home.device - /dev/vg00/home.
[ OK ] Found device
dev-disk-by\x2duuid-b9cc43d7\x2de381\x2d4c11\x2d9a21\x2d6beb7d32b6a7.device -
/dev/disk/by-uuid/b9cc43d7-e381-4c11-9a21-6beb7d32b6a7.
[ OK ] Found device dev-vg00-opt.device - /dev/vg00/opt.
Activating swap dev-vg00-swap.swap - /dev/vg00/swap...
[ OK ] Started mdmonitor.service - MD array monitor.
Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
Starting
systemd-fsck@dev-disk-by\x2duuid-b9cc43d7\x2de381\x2d4c11\x2d9a21\x2d6beb7d32b6a7.service
- File System Check on
/dev/disk/by-uuid/b9cc43d7-e381-4c11-9a21-6beb7d32b6a7...
Starting
systemd-fsck@dev-disk-by\x2duuid-d0966326\x2dff73\x2d44ea\x2d9123\x2df34d3b8587c7.service
- File System Check on
/dev/disk/by-uuid/d0966326-ff73-44ea-9123-f34d3b8587c7...
Starting [email protected] - File System Check on
/dev/vg00/home...
Starting [email protected] - File System Check on
/dev/vg00/opt...
Starting [email protected] - File System Check on
/dev/vg00/tmp...
Starting [email protected] - File System Check on
/dev/vg00/var...
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 106.085510] Adding 8388604k swap on /dev/mapper/vg00-swap. Priority:-1
extents:1 across:8388604k
[ OK ] Activated swap dev-vg00-swap.swap - /dev/vg00/swap.
[ OK ] Reached target swap.target - Swaps.
[ OK ] Finished
systemd-fsck@dev-disk-by\x2duuid-d0966326\x2dff73\x2d44ea\x2d9123\x2df34d3b8587c7.service
- File System Check on /dev/disk/by-uuid/d0966326-ff73-44ea-9123-f34d3b8587c7.
[ OK ] Finished [email protected] - File System Check on
/dev/vg00/tmp.
[ OK ] Finished [email protected] - File System Check on
/dev/vg00/opt.
[ OK ] Finished [email protected] - File System Check on
/dev/vg00/var.
[ OK ] Finished [email protected] - File System Check on
/dev/vg00/home.
[ OK ] Finished
systemd-fsck@dev-disk-by\x2duuid-b9cc43d7\x2de381\x2d4c11\x2d9a21\x2d6beb7d32b6a7.service
- File System Check on /dev/disk/by-uuid/b9cc43d7-e381-4c11-9a21-6beb7d32b6a7.
[ 106.789651] lpfc 0204:01:00.1: enabling device (0140 -> 0142)
[ 106.794247] lpfc 0204:01:00.1: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 106.794281] lpfc 0204:01:00.1: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 106.795876] scsi host3: Emulex LPe11000 PCIe Obsolete, Unsupported Fibre
Channel Adapter on PCI bus 01 device 01 irq 24 BSG
Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
Mounting boot.mount - /boot...
Mounting home.mount - /home...
Mounting opt.mount - /opt...
Mounting tmp.mount - /tmp...
Mounting var.mount - /var...
[ 107.205798] EXT4-fs (dm-6): mounted filesystem
86c38325-d9f0-4aa7-b6ee-1f74d8607177 r/w with ordered data mode. Quota mode:
none.
[ 107.209770] EXT4-fs (dm-7): mounted filesystem
ca9faec4-fa2e-4e68-b8c8-966579434ca5 r/w with ordered data mode. Quota mode:
none.
[ 107.211740] EXT4-fs (dm-5): mounted filesystem
fc0b09b5-dd98-4777-82e2-3b811e642638 r/w with ordered data mode. Quota mode:
none.
[ 107.217462] EXT4-fs (dm-4): mounted filesystem
6890d9fc-59cf-4f63-b719-444f7a9d743a r/w with ordered data mode. Quota mode:
none.
[ 107.222457] EXT4-fs (md127): mounted filesystem
b9cc43d7-e381-4c11-9a21-6beb7d32b6a7 r/w with ordered data mode. Quota mode:
none.
[ OK ] Mounted boot.mount - /boot.
[ OK ] Mounted home.mount - /home.
[ OK ] Mounted opt.mount - /opt.
[ OK ] Mounted tmp.mount - /tmp.
[ OK ] Mounted var.mount - /var.
[ OK ] Reached target local-fs.target - Local File Systems.
[ OK ] Listening on systemd-sysext.socket - System Extension Image Management.
Mounting home-itops-src.mount - /home/itops/src...
[ OK ] Started [email protected] - ifup for eth0.
Starting networking.service - Raise network interfaces...
Starting systemd-binfmt.service - Set Up Additional Binary Formats...
Starting systemd-journal-flush.service - Flush Journal to Persistent
Storage...
Starting systemd-random-seed.service - Load/Save OS Random Seed...
Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File
Formats File System...
[ 107.429245] systemd-journald[694]: Received client request to flush runtime
journal.
[ OK ] Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File
Formats File System.
[ OK ] Finished systemd-binfmt.service - Set Up Additional Binary Formats.
[ 107.568903] EXT4-fs (sdc): mounted filesystem
d0966326-ff73-44ea-9123-f34d3b8587c7 r/w with ordered data mode. Quota mode:
none.
[ OK ] Mounted home-itops-src.mount - /home/itops/src.
[ OK ] Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Reached target network.target - Network.
[ 107.664696] ibmebus port0 eth0: Logical port up: 1000Mbps Full Duplex
[ 107.664730] ibmebus port0 eth0: Physical port up
[ 107.664741] ibmebus port0 eth0: External switch port is backup port
[ 108.145438] lpfc 0205:01:00.0: enabling device (0140 -> 0142)
[ 108.149625] lpfc 0205:01:00.0: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 108.149659] lpfc 0205:01:00.0: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 108.151357] scsi host4: Emulex LPe11000 PCIe Obsolete, Unsupported Fibre
Channel Adapter on PCI bus 01 device 00 irq 25 BSG
[ OK ] Finished systemd-journal-flush.service - Flush Journal to Persistent
Storage.
Starting systemd-tmpfiles-setup.service - Create System Files and
Directories...
[ OK ] Finished systemd-tmpfiles-setup.service - Create System Files and
Directories.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.timer - Daily apt upgrade and clean
activities.
[ OK ] Started dpkg-db-backup.timer - Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timer - Periodic ext4 Online Metadata Check for
All Filesystems.
[ OK ] Started fstrim.timer - Discard unused filesystem blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Started man-db.timer - Daily man-db regeneration.
[ OK ] Started mdcheck_continue.timer - MD array scrubbing - continuation.
[ OK ] Started mdcheck_start.timer - MD array scrubbing.
[ OK ] Started mdmonitor-oneshot.timer - Reminder for degraded MD arrays.
[ OK ] Started ntpsec-rotate-stats.timer - Rotate ntpd stats daily.
[ OK ] Started systemd-tmpfiles-clean.timer - Daily Cleanup of Temporary
Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on sshd-unix-local.socket - OpenSSH Server Socket
(systemd-ssh-generator, AF_UNIX Local).
[ OK ] Listening on systemd-hostnamed.socket - Hostname Service Socket.
[ OK ] Listening on systemd-logind-varlink.socket - User Login Management
Varlink Socket.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started cron.service - Regular background program processing daemon.
Starting e2scrub_reap.service - Remove Stale Online ext4 Metadata
Check Snapshots...
Starting getty-static.service - getty on tty2-tty6 if dbus and logind
are not available...
Starting iprdump.service - IBM Power Raid dump daemon...
Starting ntpsec.service - Network Time Service...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-user-sessions.service - Permit User Sessions...
Starting wtmpdb-update-boot.service - Write boot and shutdown times
into wtmpdb...
[ 109.382726] lpfc 0205:01:00.1: enabling device (0140 -> 0142)
[ 109.389638] lpfc 0205:01:00.1: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 109.389684] lpfc 0205:01:00.1: lsa_required: 0, lsa_enabled: 0, direct
mapping: 0
[ 109.397045] scsi host5: Emulex LPe11000 PCIe Obsolete, Unsupported Fibre
Channel Adapter on PCI bus 01 device 01 irq 26 BSG
[ OK ] Started iprdump.service - IBM Power Raid dump daemon.
[ OK ] Stopped ntpsec.service - Network Time Service.
Starting iprinit.service - IBM Power Raid init daemon...
Starting iprupdate.service - IBM Power Raid update daemon...
Starting ntpsec.service - Network Time Service...
[ OK ] Finished systemd-user-sessions.service - Permit User Sessions.
[ OK ] Finished e2scrub_reap.service - Remove Stale Online ext4 Metadata
Check Snapshots.
[ OK ] Started [email protected] - Getty on tty1.
[ OK ] Started [email protected] - Getty on tty2.
[ OK ] Started [email protected] - Serial Getty on hvc0.
[ OK ] Started iprinit.service - IBM Power Raid init daemon.
[ OK ] Started iprupdate.service - IBM Power Raid update daemon.
[ OK ] Reached target iprutils.target - IBM Power Raid utilities.
[ OK ] Started [email protected] - Getty on tty3.
[ OK ] Started [email protected] - Getty on tty4.
[ OK ] Started [email protected] - Getty on tty5.
[ OK ] Started ssh.service - OpenBSD Secure Shell server.
[ OK ] Started ntpsec.service - Network Time Service.
[ OK ] Started [email protected] - Getty on tty6.
[ OK ] Finished getty-static.service - getty on tty2-tty6 if dbus and logind
are not available.
[ OK ] Finished wtmpdb-update-boot.service - Write boot and shutdown times
into wtmpdb.
[ OK ] Reached target getty.target - Login Prompts.
[ OK ] Reached target multi-user.target - Multi-User System.
[ OK ] Reached target graphical.target - Graphical Interface.
[ 110.074850] sd 0:4:4:0: [sdc] Sense Key : Illegal Request [current]
[ 110.074872] sd 0:4:4:0: [sdc] Add. Sense: Invalid field in parameter list
Debian GNU/Linux forky/sid watson hvc0
watson login:
=== END Grub and kernel console output ===
Success!
