Your message dated Tue, 26 May 2026 08:22:57 +0000
with message-id <[email protected]>
and subject line Bug#1130365: fixed in linux 7.1~rc5-1~exp1
has caused the Debian Bug report #1130365,
regarding kernel: NULL pointer deref in rcu_do_batch leading to panic on
6.19.13+deb14-amd64 (ASUS N551JM)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1130365: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1130365
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 6.19.13-1
Severity: normal
X-Debbugs-Cc: [email protected]
User: [email protected]
Usertags: amd64
Dear Maintainer,
Got my first ever QR code panic during cold boot.
Laptop workes after additional reboot.
QR Code contents:
[ 6.322092] ? __pfx_lp_init_module+0x10/0x10 [lp]
[ 6.322095] do_one_initcall+0x5b/0x300
[ 6.322100] do_init_module+0x62/0x250
[ 6.322110] init_module_from_file+0xd8/0x140
[ 6.322116] idempotent_init_module+0x114/0x310
[ 6.322120] __x64_sys_finit_module+0x71/0xe0
[ 6.322123] do_syscall_64+0x81/0x5e0
[ 6.322126] ? restore_fpregs_from_fpstate+0x46/0xa0
[ 6.322129] ? switch_fpu_return+0x5b/0xe0
[ 6.322131] ? do_syscall_64+0x245/0x5e0
[ 6.322133] ? set_next_entity+0xe7/0x280
[ 6.322137] ? do_filp_open+0xd8/0x180
[ 6.322141] ? finish_task_switch.isra.0+0x95/0x2c0
[ 6.322147] ? do_sys_openat2+0xac/0xf0
[ 6.322151] ? __x64_sys_openat+0x61/0xa0
[ 6.322153] ? do_syscall_64+0xbe/0x5e0
[ 6.322155] ? irqentry_exit+0x6e/0x570
[ 6.322159] ? exc_page_fault+0x7e/0x1a0
[ 6.322162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 6.322166] RIP: 0033:0x7f024d71ac69
[ 6.322172] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89
f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 77 61 0d 00 f7 d8 64 89 01 48
[ 6.322175] RSP: 002b:00007f024c5fcbc8 EFLAGS: 00000246 ORIG_RAX:
0000000000000139
[ 6.322178] RAX: ffffffffffffffda RBX: 00007f023c001380 RCX: 00007f024d71ac69
[ 6.322179] RDX: 0000000000000004 RSI: 00007f024dec744d RDI: 000000000000000a
[ 6.322181] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
[ 6.322182] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000020000
[ 6.322184] R13: 00007f024dec744d R14: 00007f023c0014a0 R15: 0000000000000000
[ 6.322188] </TASK>
[ 6.322189] ---[ end trace 0000000000000000 ]---
[ 6.322205] lp: driver loaded but no devices found
[ 6.339132] EXT4-fs (sda4): re-mounted 795ee075-978f-4245-9dad-ecccd37080d8
r/w.
[ 6.341284] systemd[1]: Finished systemd-remount-fs.service - Remount Root
and Kernel File Systems.
[ 6.357379] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware
Database skipped, unmet condition check ConditionNeedsUpdate=/etc
[ 6.357478] systemd[1]: systemd-pstore.service - Platform Persistent Storage
Archival skipped, unmet condition check
ConditionDirectoryNotEmpty=/sys/fs/pstore
[ 6.358921] systemd[1]: Starting systemd-random-seed.service - Load/Save OS
Random Seed...
[ 6.358956] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup skipped,
unmet condition check ConditionSecurity=measured-uki
[ 6.358983] systemd[1]: systemd-pcrnvdone.service - TPM PCR NvPCR
Initialization Separator skipped, unmet condition check
ConditionSecurity=measured-uki
[ 6.360224] slab kernfs_node_cache start ffff8ed2a5937cc0 pointer offset
120 size 136
[ 6.360235] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6.360897] #PF: supervisor instruction fetch in kernel mode
[ 6.360898] #PF: error_code(0x0010) - not-present page
[ 6.360900] PGD 0 P4D 0
[ 6.360903] Oops: Oops: 0010 [#1] SMP PTI
[ 6.360906] CPU: 6 UID: 0 PID: 0 Comm: swapper/6 Tainted: G W
6.19.13+deb14-amd64 #1 PREEMPT(lazy) Debian 6.19.13-1
[ 6.360910] Tainted: [W]=WARN
[ 6.360911] Hardware name: ASUSTeK COMPUTER INC. N551JM/N551JM, BIOS
N551JM.205 02/13/2015
[ 6.360912] RIP: 0010:0x0
[ 6.360919] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 6.365640] RSP: 0018:ffffd4be4024ced0 EFLAGS: 00010286
[ 6.365643] RAX: 0000000000000001 RBX: 0000000000000036 RCX: 0000000000000001
[ 6.365644] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ed2a5937d38
[ 6.365645] RBP: ffff8ed280d61ac0 R08: 0000000000000000 R09: ffffd4be4024cc18
[ 6.365646] R10: ffffffff8fcdbfe8 R11: 00000000ffffefff R12: ffff8ed59f3b2fc0
[ 6.365647] R13: ffffd4be4024cf00 R14: 0000000000000035 R15: 0000000000000000
[ 6.365648] FS: 0000000000000000(0000) GS:ffff8ed60eb26000(0000)
knlGS:0000000000000000
[ 6.365649] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.365650] CR2: ffffffffffffffd6 CR3: 000000002342c006 CR4: 00000000001706f0
[ 6.365651] Call Trace:
[ 6.365652] <IRQ>
[ 6.365653] rcu_do_batch+0x1bc/0x560
[ 6.365661] rcu_core+0x17d/0x3a0
[ 6.365663] handle_softirqs+0xd7/0x310
[ 6.365666] __irq_exit_rcu+0xbc/0xe0
[ 6.365668] sysvec_apic_timer_interrupt+0x71/0x90
[ 6.365674] </IRQ>
[ 6.365674] <TASK>
[ 6.365675] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[ 6.365677] RIP: 0010:cpuidle_enter_state+0xcc/0x650
[ 6.365680] Code: 00 00 e8 b7 49 2b ff e8 12 f0 ff ff 49 89 c4 0f 1f 44 00
00 31 ff e8 93 92 29 ff 45 84 ff 0f 85 02 02 00 00 fb 0f 1f 44 00 00 <85> ed 0f
88 d3 01 00 00 4c 63 f5 49 83 fe 0a 0f 83 46 04 00 00 49
[ 6.365681] RSP: 0018:ffffd4be40103e50 EFLAGS: 00000246
[ 6.365682] RAX: ffff8ed60eb26000 RBX: ffff8ed59f3ba580 RCX: 0000000000000000
[ 6.365683] RDX: 000000017b18f2a7 RSI: 0000000033518eeb RDI: 0000000000000000
[ 6.365684] RBP: 0000000000000005 R08: fffffffe346e0469 R09: 0000000000028870
[ 6.365685] R10: 0000000346fd8e5d R11: 0000000000000000 R12: 000000017b18f2a7
[ 6.365685] R13: ffffffff8fe48b20 R14: 0000000000000005 R15: 0000000000000000
[ 6.365688] cpuidle_enter+0x31/0x50
[ 6.365693] do_idle+0x143/0x2b0
[ 6.365697] cpu_startup_entry+0x29/0x30
[ 6.365700] start_secondary+0x126/0x180
[ 6.365703] common_startup_64+0x13e/0x141
[ 6.365706] </TASK>
[ 6.365707] Modules linked in: parport_pc lp ppdev parport msr i2c_dev
configfs efi_pstore nfnetlink autofs4 ext4 crc16 mbcache jbd2 crc32c_cryptoapi
btrfs blake2b libblake2b raid10 raid456 async_raid6_recov async_memcpy async_pq
async_xor async_tx xor raid6_pq raid1 raid0 md_mod hid_logitech_hidpp
hid_logitech_dj i915 hid_generic drm_buddy sr_mod sd_mod ttm usbhid cdrom
i2c_algo_bit hid drm_display_helper ahci cec libahci rc_core drm_client_lib
libata drm_kms_helper iTCO_wdt rtsx_pci_sdmmc intel_pmc_bxt xhci_pci drm
mmc_core iTCO_vendor_support xhci_hcd scsi_mod ehci_pci watchdog r8169 ehci_hcd
mxm_wmi i2c_i801 psmouse usbcore video i2c_smbus rtsx_pci scsi_common realtek
serio_raw lpc_ich button battery wmi usb_common efivarfs
[ 6.381504] CR2: 0000000000000000
[ 6.381506] ---[ end trace 0000000000000000 ]---
[ 6.492844] RIP: 0010:0x0
[ 6.492853] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 6.492854] RSP: 0018:ffffd4be4024ced0 EFLAGS: 00010286
[ 6.492857] RAX: 0000000000000001 RBX: 0000000000000036 RCX: 0000000000000001
[ 6.492859] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8ed2a5937d38
[ 6.492860] RBP: ffff8ed280d61ac0 R08: 0000000000000000 R09: ffffd4be4024cc18
[ 6.492862] R10: ffffffff8fcdbfe8 R11: 00000000ffffefff R12: ffff8ed59f3b2fc0
[ 6.492863] R13: ffffd4be4024cf00 R14: 0000000000000035 R15: 0000000000000000
[ 6.492865] FS: 0000000000000000(0000) GS:ffff8ed60eb26000(0000)
knlGS:0000000000000000
[ 6.492867] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.492869] CR2: ffffffffffffffd6 CR3: 000000002342c006 CR4: 00000000001706f0
[ 6.492871] Kernel panic - not syncing: Fatal exception in interrupt
[ 6.492888] Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: N551JM
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: N551JM.205
board_vendor: ASUSTeK COMPUTER INC.
board_name: N551JM
board_version: 1.0
** Configuration for modprobe:
blacklist microcode
blacklist mei_me
blacklist mei
blacklist nouveau
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
blacklist microcode
blacklist nouveau
blacklist bochs_drm
install nvidia modprobe -i nvidia-current $CMDLINE_OPTS
install nvidia_modeset modprobe nvidia ; modprobe -i nvidia-current-modeset
$CMDLINE_OPTS
install nvidia_drm modprobe nvidia-modeset ; modprobe -i nvidia-current-drm
$CMDLINE_OPTS
install nvidia_uvm modprobe nvidia ; modprobe -i nvidia-current-uvm
$CMDLINE_OPTS
install nvidia_peermem modprobe nvidia ; modprobe -i nvidia-current-peermem
$CMDLINE_OPTS
remove nvidia modprobe -r -i nvidia-drm nvidia-modeset nvidia-peermem
nvidia-uvm nvidia
remove nvidia_modeset modprobe -r -i nvidia-drm nvidia-modeset
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options ath9k_htc use_dev_fw=1
options kvm enable_virt_at_load=0
options md_mod start_ro=1
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0
options kvm enable_virt_at_load=0
options ipv6 disable_ipv6=1
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor DRAM Controller [8086:0c04] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
Capabilities: <access denied>
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal
decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 26
IOMMU group: 2
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: f6000000-f70fffff [size=17M] [32-bit]
Prefetchable memory behind bridge: e0000000-f1ffffff [size=288M]
[32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core
Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin B disabled, MSI(X) routed to IRQ 42
IOMMU group: 0
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller [8086:0c0c] (rev 06) (prog-if 00 [HDA compatible])
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 43
IOMMU group: 3
Region 0: Memory at f7a14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin B disabled, MSI(X) routed to IRQ 33-40
IOMMU group: 4
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin B routed to IRQ 11
IOMMU group: 5
Region 0: Memory at f7a1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin B routed to IRQ 16
IOMMU group: 6
Region 0: Memory at f7a1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller [8086:8c20] (rev 05) (prog-if 00 [HDA
compatible])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 44
IOMMU group: 7
Region 0: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal
decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 27
IOMMU group: 8
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #2 [8086:8c12] (rev d5) (prog-if 00 [Normal
decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin C disabled, MSI(X) routed to IRQ 28
IOMMU group: 9
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 2000-2fff [size=4K] [16-bit]
Memory behind bridge: cfe00000-cfffffff [size=2M] [32-bit]
Prefetchable memory behind bridge: f2000000-f21fffff [size=2M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal
decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin D disabled, MSI(X) routed to IRQ 29
IOMMU group: 10
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f7900000-f79fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal
decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin E disabled, MSI(X) routed to IRQ 30
IOMMU group: 11
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: f7800000-f78fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin B routed to IRQ 23
IOMMU group: 12
Region 0: Memory at f7a1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller
[8086:8c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 13
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin C disabled, MSI(X) routed to IRQ 41
IOMMU group: 13
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7a1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family
SMBus Controller [8086:8c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupts: pin D routed to IRQ 18
IOMMU group: 13
Region 0: Memory at f7a19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 860M]
[10de:1392] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:177d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupts: pin B disabled, MSI(X) routed to IRQ 46
IOMMU group: 2
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at f7000000 [virtual] [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
04:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1]
(rev bb)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [Wilkins Peak 2]
[8086:4160]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 45
IOMMU group: 14
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI
Express Card Reader [10ec:5287] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:202f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin C disabled, MSI(X) routed to IRQ 31
IOMMU group: 15
Region 0: Memory at f7815000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f7800000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
05:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev
12)
Subsystem: ASUSTeK Computer Inc. Device [1043:200f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 32
IOMMU group: 15
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7814000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f7810000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 003: ID 8087:07dc Intel Corp. Bluetooth wireless interface
Bus 003 Device 004: ID 13d3:5188 IMC Networks USB2.0 UVC HD Webcam
Bus 003 Device 006: ID 0e8d:201d MediaTek Inc. Volla Phone X
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
-- System Information:
Debian Release: forky/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.19.13+deb14-amd64 (SMP w/8 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=lt_LT.UTF-8, LC_CTYPE=lt_LT.UTF-8 (charmap=UTF-8), LANGUAGE=lt
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.19.13+deb14-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.151
ii kmod 34.2-2+b1
ii linux-base 4.15
ii linux-base-6.19.13+deb14-amd64 6.19.13-1
ii linux-binary-6.19.13+deb14-amd64 6.19.13-1
ii linux-modules-6.19.13+deb14-amd64 6.19.13-1
Versions of packages linux-image-6.19.13+deb14-amd64 recommends:
ii apparmor 4.1.7-2
Versions of packages linux-image-6.19.13+deb14-amd64 suggests:
pn debian-kernel-handbook <none>
ii firmware-linux-free 20241210-3
ii grub-efi-amd64 2.14-2
pn linux-doc-6.19 <none>
Versions of packages linux-image-6.19.13+deb14-amd64 is related to:
ii firmware-amd-graphics 20260410-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
ii firmware-intel-graphics 20260410-1
ii firmware-intel-misc 20260410-1
ii firmware-intel-sound 20260410-1
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20260410-1
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
ii firmware-mediatek 20260410-1
ii firmware-misc-nonfree 20260410-1
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
ii firmware-nvidia-graphics 20260410-1
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
ii firmware-realtek 20260410-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 7.1~rc5-1~exp1
Done: Salvatore Bonaccorso <[email protected]>
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Salvatore Bonaccorso <[email protected]> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Tue, 26 May 2026 09:45:29 +0200
Source: linux
Architecture: source
Version: 7.1~rc5-1~exp1
Distribution: experimental
Urgency: medium
Maintainer: Debian Kernel Team <[email protected]>
Changed-By: Salvatore Bonaccorso <[email protected]>
Closes: 1045765 1130365
Changes:
linux (7.1~rc5-1~exp1) experimental; urgency=medium
.
* New upstream release candidate.
.
[ Salvatore Bonaccorso ]
* parport: Fix race between port and client registration (Closes: #1130365)
.
[ Ben Hutchings ]
* Fix dirtying of the source tree when building tools (Closes: #1045765):
- rtla: Fix output files in source tree
- perf tools: Put Python egg info in output directory
- perf tools: Put Python bytecode in output directory
Checksums-Sha1:
7387905df8dc5a46e4853b5be6df37b058167105 183288 linux_7.1~rc5-1~exp1.dsc
963a70d581f1627aba7cbd49f93eb308379ffd82 161551976 linux_7.1~rc5.orig.tar.xz
1bb654bed52483c729936eff9e5fe4ee2120ece7 1457648
linux_7.1~rc5-1~exp1.debian.tar.xz
e78090972219b77626c93e3daa09ef71178574f5 6893
linux_7.1~rc5-1~exp1_source.buildinfo
Checksums-Sha256:
ddcf907dbe2bf97490fa9903deaba033e5f8132dcaf1f18124b5293af7f2f321 183288
linux_7.1~rc5-1~exp1.dsc
fbc8deb3da8beb8d7d38d006883ebe12f286238664033eb9a3807a33c92440e5 161551976
linux_7.1~rc5.orig.tar.xz
915a2d28e035911535e2c826108c573378ad7755e5d5046a21201c9d9506a1d7 1457648
linux_7.1~rc5-1~exp1.debian.tar.xz
5023083e65895acd4877a40802c4ba2636be0264ae940241e39dd37a2d33dc11 6893
linux_7.1~rc5-1~exp1_source.buildinfo
Files:
8c5d3c864e2d339754196388bd7e45ab 183288 kernel optional
linux_7.1~rc5-1~exp1.dsc
e995e7f9c310ce41ee579b582b4edfcd 161551976 kernel optional
linux_7.1~rc5.orig.tar.xz
af4976d18b01d498244588bd1464a0a0 1457648 kernel optional
linux_7.1~rc5-1~exp1.debian.tar.xz
1e7848782a66ec2f2238b0308465303c 6893 kernel optional
linux_7.1~rc5-1~exp1_source.buildinfo
-----BEGIN PGP SIGNATURE-----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=eyS9
-----END PGP SIGNATURE-----
pgpRB0q2iwZ2D.pgp
Description: PGP signature
--- End Message ---
