$ echo "blacklist ee1004" | sudo tee /etc/modprobe.d/ee1004.conf
blacklist ee1004
$ sudo depmod -ae
depmod: WARNING: -e needs -E or -F
$ sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-6.12.107+deb13-amd64
Can the above warning be ignored?
I think yes. AFAIK that depmod step isn't needed and the wiki should be
fixed.
Does that help?
Here we go (after many reboots):
$ cat /etc/modprobe.d/ee1004.conf
blacklist ee1004
$ lsmod | grep ee1004
$ sudo dmesg | egrep "i2c|ee1004"
$ sudo decode-dimms
No EEPROM found, try loading the eeprom, at24 or or ee1004 module
$ sudo i2cdetect -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- 56 -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$
It helps in the sense that the error message “ee1004 0-0056: Failed to select
page 0 (-6)” is gone. It doesn't help in the sense that I still don't know how
to programmatically read SPD-EEPROM of the modules installed on my system.
Alma
