Hello,

On Tue, Nov 03, 2026 at 06:53:43PM +0000, [email protected] wrote:
> I had some strugles with the bisect, as I found that after doing a
> cold boot of the Acemagician AM06 pro and the Wavlink USB hub (where
> 2x Display Port, 1x HDMI screens and USB wired mouse, keyboard, webcam
> and RJ45/ethernet are connected) that some "bad" kernels behaved ok so
> I reset the bisect and started over, then tried multiple reboots for
> each of the 9 bisect steps and tried to even stay longer connected.
> The commit found here seems not linked to my issue, but I still share
> here...

That might mean that the issue lies somewhere, where it's not covered by
your test and so the bisection result is wrong. A likely cause is that
it's the kernel that is shuting down the machine for a reboot that
leaves the USB controller in a state that cannot be picked up properly
by the next kernel. So maybe neither good nor bad results in your
bisection might be reliable.

To debug that further: Can you describe the breakage in a bit more
detail? If it's broken, is it broken from the start? Does it affect all
USB sockets? Does it affect several devices? Are there any kernel
messages that accompany the breakage? Can you please provide a boot log
of the (working) 6.12.107 kernel and one 6.12.113 that is broken? Also
please provide the "usual" kernel bugreport details about your machine.
You can do that by

        reportbug -N 1151916

and then selecting `x` at the first prompt.

Best regards
Uwe

Attachment: signature.asc
Description: PGP signature

Reply via email to