Control: tags -1 + moreinfo
Hi,
On Mon, Nov 09, 2026 at 06:17:47PM +0100, [HERMES/Hyper-ιota] wrote:
> Package: src:linux
> Version: 6.12.116-1
> Severity: important
> Tags: regression
>
> Dear Maintainer,
>
> After upgrading from linux-image-6.12.107+deb13-amd64 (6.12.107-1) to
> linux-image-6.12.116+deb13-amd64 (6.12.116-1), the system hangs ~30 s after
> every boot. snd_hda_intel's probe work spins on CPU#0 in
> snd_hdac_bus_send_cmd() while initializing the codecs. On this 2-core machine,
> the rest of the system then stalls ("task systemd:1 blocked for more than 120
> seconds", login hangs, and SSH accepts connections but never starts a shell).
> It needs a hard power-off.
>
> Hardware:
> HP Laptop 15s-fq3xxx, board 88EA, BIOS F.63 (10/05/2023)
> CPU: Intel Celeron N4500 (Jasper Lake), 2 cores
> Audio: 00:1f.3 Intel Jasper Lake HD Audio [8086:4dc8] (rev 01),
> subsystem HP [103c:88ea]
> Codecs (as detected on 6.12.107): Realtek ALC236 (addr 0), Intel HDMI (addr 2)
> GPU: 00:02.0 Intel JasperLake UHD Graphics [8086:4e55]
> firmware-sof-signed 2025.01-1; legacy HDA driver is selected (no DMIC)
>
> Reproducibility:
> - 6.12.107-1: audio works on every boot, including a warm boot directly
> after a 6.12.116 hang (so the hardware is not stuck or broken).
> - 6.12.116-1: hangs on every boot (4/4).
> - 6.12.116-1 + runtime "modprobe snd_hda_intel" after boot: same soft lockup.
> - 6.12.116-1 + snd_hda_intel probe_mask=1 (Realtek codec only): same soft
> lockup, so the HDMI codec alone is not the trigger.
> - 6.12.116-1 + snd_hda_intel single_cmd=1: no lockup, but neither codec
> answers:
> hdaudio hdaudioC0D0: no AFG or MFG node found
> hdaudio hdaudioC0D2: no AFG or MFG node found
> snd_hda_intel 0000:00:1f.3: no codecs initialized
> The subsequent reboot then hung at the very end of shutdown.
>
> Workaround: blacklisting snd_hda_intel / snd_sof_pci_intel_icl /
> snd_sof_pci_intel_cnl / snd_soc_avs makes 6.12.116 boot and run stably, but
> there is no audio.
>
> I could not find an obvious culprit among the ALSA entries in the
> 6.12.107..6.12.116 changelog. Because the codec link depends on the i915 audio
> component ("bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])"
> appears just before the hang), an i915 or power-management change may also be
> the cause. I'm happy to test patches or bisect between stable versions if
> that helps.
Is the issue reproducible with the current 6.12.117-1? If yes, then
yes please do bisect the changes between 6.12.107 and 6.12.116. To
narrow down bit more the search space, you could test as well first
6.12.116-1
6.12.115-2
6.12.115-1
6.12.113-1
6.12.111-1
6.12.107-1
to identify between wich upstream versions to biscect.
Regards,
Salvatore