Hi Georg,
Please don't drop the bug report address ([EMAIL PROTECTED]) from the CC
list, as all the information you're providing to me might be important for
somebody else looking at the bug.
On Fri, 21 Apr 2006, Georg Colle wrote:
Am Freitag, 21. April 2006 07:53 schrieb Jurij Smakov:
On Thu, 20 Apr 2006, Georg Colle wrote:
Now 'lsmod' lists sk98lin and there is a directory /proc/net/sk98lin/ -
but the directory is empty. The expected 'eth0' document in it is
missing. 'ifconfig eth0 up' and 'ifconfig' still produce the same
messages as immediately after booting.
Just to be clear, the card does not work during install too, right? Or
does it?
Yes, during the install the card did it very well!
Only after rebooting the card worked no longer.
Wow, that's interesting. The kernel which is used by installer is -486, so
if you're running linux-image-2.6.15-1-686, you might want to try
installing linux-image-2.6.15-1-486 and booting it to check whether your
card will start working. It would be pretty surprising if it would, but
you never know :-).
Thanks,
Jurij Smakov [EMAIL PROTECTED]
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
